[mdk-re] Re[2]: [mdk-re] Re: [mdk-re] Re: USR Sportster Voice 33.6 Faxmodem (внешний)

[Sergey Kuznetsov]

>> (В BIOS'е COM1 сейчас стоит на Disabled)
> 
> а какой смысл?
> модем внешний?
> поставьте com1 и com3 в биосе, как положено
> 
> pnp os - yes
> 
> и тогда уж играйте.
> должен все подхватить на лету и как по маслу.
> прямо dmesg должен все рассказать про порт как минимум.

И так пробовал, последний раз, по вашему совету, с PnP OS = yes. Не
видит все равно. Вот вывод dmesg:

[yozhik на localhost yozhik]$ dmesg
Linux version 2.2.18-ipl5mdk-up (ldv на basalt.office.altlinux.ru) (gcc version 2.95.3 19991030 ((Linux-Mandrake RE Spring 2001, for backwards 
compatibility)) #1 Sat Mar 17 21:39:18 MSK 2001
USER-provided physical RAM map:
 USER: 0009f000 @ 00000000 (usable)
 USER: 07ef0000 @ 00100000 (usable)
Detected 504038 kHz processor.
ide_setup: ide1=autotune
ide_setup: ide0=autotune
Console: colour VGA+ 80x25
Calibrating delay loop... 1005.97 BogoMIPS
Memory: 127488k/131008k available (1300k kernel code, 408k reserved, 1736k data, 76k init, 0k bigmem)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
Inode hash table entries: 16384 (128k), inode-max: 16376
VFS: Diskquotas version dquot_6.4.0 initialized
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
512K L2 cache (4 way)
CPU: L2 Cache: 512K
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch на atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfafe0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
Linux IP multicast router 0.06 plus PIM-SM
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS03 at 0x02e8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
loop: registered device at major 7
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DTLA-305020, ATA DISK drive
hdb: SAMSUNG WN316025A (1.6 GB), ATA DISK drive
hdd: _NEC DV-5700A, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: IBM-DTLA-305020, 19623MB w/380kB Cache, CHS=2501/255/63, UDMA(33)
hdb: SAMSUNG WN316025A (1.6 GB), 1536MB w/109kB Cache, CHS=780/64/63, DMA
hdd: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: KNI detected, trying cache-avoiding KNI checksum routine
   pIII_kni  :  1035.558 MB/sec
raid5: MMX detected, trying high-speed MMX checksum routines
   pII_mmx   :  1122.807 MB/sec
   p5_mmx    :  1173.480 MB/sec
   8regs     :   899.160 MB/sec
   32regs    :   485.775 MB/sec
using fastest function: pIII_kni (1035.558 MB/sec)
scsi : 0 hosts.
scsi : detected total.
NET4: Frame Diverter 0.5
md.c: sizeof(mdp_super_t) = 4096
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 hda14 hda15 hda16 hda17 >
 hdb: hdb2 < hdb5 >
autodetecting RAID arrays
autorun ...
... autorun DONE.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 76k freed
Executing init=/sbin/init
Adding Swap: 136512k swap-space (priority -1)
Checking ReiserFS transaction log (device 03:11) ...
Using r5 hash to sort names
Sponsored by thresholdnetworks.com, emusic.com, bigstorage.com
ReiserFS version 3.5.31
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
Checking ReiserFS transaction log (device 03:10) ...
Using r5 hash to sort names
ReiserFS version 3.5.31
CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.3.7 (demand dialling)
PPP line discipline registered.
lp: no devices found
lp: no devices found
lp: no devices found
lp: no devices found
lp: no devices found
lp: no devices found
[yozhik на localhost yozhik]$

Что  примечательно:  в оффтопике на включенном модеме горят индикаторы
TR и CS, а в Linux - только CS. Порт настроен в соответствии с выводом
setserial  /dev/ttyS0 (0x03f8, irq4). Модем все равно не виден, чем ни
опрашивай.  Не  знаю,  относится ли это к делу, но до этого, как я уже
писал,  я работал через внутренний Sportster на COM2, irq3. /dev/modem
сейчас перекинут на /dev/ttyS0, но может надо еще что-то поменять?

С уважением,
Сергей