[sisyphus] [Comm] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :(
Aleksey Novodvorsky
=?iso-8859-1?q?a=2Ee=2Envdv_=CE=C1_gmail=2Ecom?=
Чт Авг 2 01:02:10 MSD 2007
Глеб, спасибо!
Попробуем исправить.
Rgrds, Алексей
On 8/1/07, Gleb Kulikov <glebus на asd.iao.ru> wrote:
> В сообщении от Среда 01 августа 2007 Aleksey Novodvorsky написал:
> > On 8/1/07, Gleb Kulikov <glebus на asd.iao.ru> wrote:
> > > В сообщении от Среда 01 августа 2007 Aleksey Novodvorsky написал:
>
> > > > Если он у кого-то есть в msk и можно занести в наш офис, -- сообщите,
> > > > пощупаем.
>
> Диски увидела Мандрива 2007 (что не помешало ей зависнуть на подгрузке
> HAL/ALSы. пришлось закомментировать загрузку/выгрузку модулей в modules.
>
> uname -a:
>
> Linux localhost 2.6.17-5mdv #1 SMP Wed Sep 13 14:32:31 EDT 2006 i686 Genuine
> Intel(R) CPU T2130 @ 1.86GHz GNU/Linux
>
> +++++++++++++++++++
>
> lsmod:
>
> Module Size Used by
> nls_iso8859_1 4800 1
> nls_cp437 6464 1
> vfat 11104 1
> fat 46876 1 vfat
> nfsd 216248 17
> ipv6 237120 16
> exportfs 5536 1 nfsd
> lockd 56360 2 nfsd
> nfs_acl 3776 1 nfsd
> sunrpc 137532 12 nfsd,lockd,nfs_acl
> 8139too 22880 0
> mii 5664 1 8139too
> af_packet 17960 0
> video 13924 0
> thermal 11240 0
> fan 4036 0
> container 3968 0
> button 5808 0
> battery 8260 0
> ac 4292 0
> ide_cd 35776 0
> binfmt_misc 9800 1
> loop 15400 0
> nls_utf8 2624 1
> ntfs 266940 1
> xfs 573880 2
> sg 30776 0
> dm_mod 49944 0
> cpufreq_ondemand 6956 0
> cpufreq_conservative 6952 0
> cpufreq_powersave 2400 0
> freq_table 4800 0
> processor 21448 1 thermal
> asus_acpi 10324 0
> nvram 8104 0
> usbmouse 5280 0
> usbhid 49024 0
> usb_storage 88452 2
> ehci_hcd 29160 0
> ohci_hcd 19012 0
> usbcore 113472 6 usbmouse,usbhid,usb_storage,ehci_hcd,ohci_hcd
> tsdev 7040 0
> evdev 8864 1
> joydev 8928 0
> ext3 124936 1
> jbd 51028 1 ext3
> sd_mod 18368 9
> sata_sis 6852 5
> libata 60620 1 sata_sis
> scsi_mod 118376 4 sg,usb_storage,sd_mod,libata
>
> ++++++++++++++++++++++++++
>
> modules:
>
> # /etc/modules: kernel modules to load at boot time.
> #
> # This file should contain the names of kernel modules that are
> # to be loaded at boot time, one per line. Comments begin with
> # a `#', and everything on the line after them are ignored.
>
> nvram
> evdev
> asus_acpi
>
> ++++++++++++++++++++++++++++++++
>
> modprobe.preload:
>
> # /etc/modprobe.preload: kernel modules to load at boot time.
> #
> # This file should contain the names of kernel modules that are
> # to be loaded at boot time, one per line. Comments begin with
> # a `#', and everything on the line after them are ignored.
> # this file is for module-init-tools (kernel 2.5 and above) ONLY
> # for old kernel use /etc/modules
>
> nvram
> evdev
> asus_acpi
>
> +++++++++++++++++++++++++++++++++++++++++++++
> lspci:
>
> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] Unknown device 0671
> 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
> 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] Unknown device 0968 (rev
> 01)
> 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
> 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
> (rev 0f)
> 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
> (rev 0f)
> 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
> 00:05.0 IDE interface: Silicon Integrated Systems [SiS] Unknown device 1183
> (rev 03)
> 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
> 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
> 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Unknown device 7502
> 01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 718a
> 02:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 001c
> (rev 01)
>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> dmesg:
>
> Linux version 2.6.17-5mdv (rtp на octopus.mandriva.com) (gcc version 4.1.1
> 20060724 (prerelease) (4.1.1-3mdk)) #1 SMP Wed Sep 13 14:32:31 EDT 2006
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
> BIOS-e820: 000000003ffbe000 - 0000000040000000 (ACPI NVS)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
> 127MB HIGHMEM available.
> 895MB LOWMEM available.
> On node 0 totalpages: 262064
> DMA zone: 4096 pages, LIFO batch:0
> Normal zone: 225279 pages, LIFO batch:31
> HighMem zone: 32689 pages, LIFO batch:7
> DMI present.
> ACPI: RSDP (v000 ACPIAM ) @ 0x000f8db0
> ACPI: RSDT (v001 _ASUS_ Notebook 0x20070402 MSFT 0x00000097) @ 0x3ffb0000
> ACPI: FADT (v002 040207 FACP0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0200
> ACPI: MADT (v001 040207 APIC0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0390
> ACPI: MCFG (v001 040207 OEMMCFG 0x20070402 MSFT 0x00000097) @ 0x3ffb03f0
> ACPI: SLIC (v001 _ASUS_ Notebook 0x20070402 MSFT 0x00000097) @ 0x3ffb0430
> ACPI: WDRT (v001 040207 OEMWDRT 0x20070402 MSFT 0x00000097) @ 0x3ffb05b0
> ACPI: BOOT (v001 040207 BOOT0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0600
> ACPI: OEMB (v001 040207 OEMB0939 0x20070402 MSFT 0x00000097) @ 0x3ffbe040
> ACPI: DSDT (v001 A0714 A0714002 0x00000002 INTL 0x20051117) @ 0x00000000
> ACPI: PM-Timer IO Port: 0x808
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 6:14 APIC version 20
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> Processor #1 6:14 APIC version 20
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Enabling APIC mode: Flat. Using 1 I/O APICs
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
> Built 1 zonelists
> Kernel command line: auto BOOT_IMAGE=linux root=805 splash=silent
> bootsplash: silent mode.
> mapped APIC to ffffe000 (fee00000)
> mapped IOAPIC to ffffd000 (fec00000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> Detected 1866.405 MHz processor.
> Using pmtmr for high-res timesource
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 1033376k/1048256k available (2426k kernel code, 13592k reserved, 756k
> data, 244k init, 130756k highmem, 0k BadRAM)
> Checking if this processor honours the WP bit even in supervisor mode... Ok.
> Calibrating delay using timer specific routine.. 3761.84 BogoMIPS
> (lpj=7523692)
> Mount-cache hash table entries: 512
> CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000
> 0000c189 00000000 00000000
> CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189
> 00000000 00000000
> monitor/mwait feature present.
> using mwait in idle threads.
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c189
> 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> Checking 'hlt' instruction... OK.
> SMP alternatives: switching to UP code
> checking if image is initramfs... it is
> Freeing initrd memory: 640k freed
> ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
> CPU0: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c
> SMP alternatives: switching to SMP code
> Booting processor 1/1 eip 3000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 3732.58 BogoMIPS
> (lpj=7465176)
> CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000
> 0000c189 00000000 00000000
> CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189
> 00000000 00000000
> monitor/mwait feature present.
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c189
> 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#1.
> CPU1: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c
> Total of 2 processors activated (7494.43 BogoMIPS).
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> ...trying to set up timer (IRQ0) through the 8259A ... failed.
> ...trying to set up timer as Virtual Wire IRQ... works.
> checking TSC synchronization across 2 CPUs: passed.
> Brought up 2 CPUs
> migration_cost=8000
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
> PCI: Not using MMCONFIG.
> PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
> Setting up standard PCI resources
> ACPI: Subsystem revision 20060127
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> Boot video device is 0000:01:00.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 11 devices
> PnPBIOS: Disabled
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> PCI: Bridge: 0000:00:01.0
> IO window: a000-afff
> MEM window: fa900000-fa9fffff
> PREFETCH window: aff00000-bfefffff
> PCI: Bridge: 0000:00:06.0
> IO window: disabled.
> MEM window: faa00000-faafffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:07.0
> IO window: b000-cfff
> MEM window: fab00000-feafffff
> PREFETCH window: bff00000-dfefffff
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> PCI: Setting latency timer of device 0000:00:07.0 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> Simple Boot Flag value 0xc0 read from CMOS RAM was invalid
> Simple Boot Flag at 0xff set to 0x1
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> apm: disabled - APM is not SMP safe.
> audit: initializing netlink socket (disabled)
> audit(1186006968.576:1): initialized
> highmem bounce pool size: 64 pages
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> Initializing Cryptographic API
> io scheduler noop registered
> io scheduler anticipatory registered (default)
> io scheduler deadline registered
> io scheduler cfq registered
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> pcie_portdrv_probe->Dev[0004:1039] has invalid IRQ. Check vendor BIOS
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:01.0:pcie00]
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> pcie_portdrv_probe->Dev[000a:1039] has invalid IRQ. Check vendor BIOS
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:06.0:pcie00]
> PCI: Setting latency timer of device 0000:00:07.0 to 64
> pcie_portdrv_probe->Dev[000a:1039] has invalid IRQ. Check vendor BIOS
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:07.0:pcie00]
> Allocate Port Service[0000:00:07.0:pcie02]
> vesafb: framebuffer at 0xb0000000, mapped to 0xf8880000, using 6144k, total
> 16384k
> vesafb: mode is 1024x768x16, linelength=2048, pages=9
> vesafb: protected mode interface info at c000:aac2
> vesafb: scrolling: redraw
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 221104
> bytes,<6>...found (1024x768, 221056 bytes, v3).
> Console: switching to colour frame buffer device 119x41
> fb0: VESA VGA frame buffer device
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Real Time Clock Driver v1.12ac
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> SIS5513: IDE controller at PCI slot 0000:00:02.5
> SIS5513: chipset revision 1
> SIS5513: not 100% native mode: will probe irqs later
> SIS5513: SiS968 ATA 133 (2nd gen) controller
> ide0: BM-DMA at 0xffe0-0xffe7, BIOS settings: hda:DMA, hdb:DMA
> Probing IDE interface ide0...
> hda: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
> i8042.c: Detected active multiplexing controller, rev 1.1.
> serio: i8042 AUX0 port at 0x60,0x64 irq 12
> serio: i8042 AUX1 port at 0x60,0x64 irq 12
> serio: i8042 AUX2 port at 0x60,0x64 irq 12
> serio: i8042 AUX3 port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> mice: PS/2 mouse device common for all mice
> md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: bitmap version 4.39
> TCP bic registered
> NET: Registered protocol family 1
> Starting balanced_irq
> Using IPI No-Shortcut mode
> ACPI wakeup devices:
> PCI0 USB USB2 HDA P0P6 P0P7 EUSB MAC S184 PWRB SLPB
> ACPI: (supports S0 S1 S3 S4 S5)
> BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
> Freeing unused kernel memory: 244k freed
> SCSI subsystem initialized
> libata version 1.20 loaded.
> sata_sis 0000:00:05.0: version 0.5-rtp
> ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16
> sata_sis 0000:00:05.0: Detected SiS182/1182/1183 chipset
> ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 16
> ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 16
> input: AT Translated Set 2 keyboard as /class/input/input0
> ata1: SATA link up <unknown> Gbps (SStatus 3)
> ata1: dev 0 cfg 49:0f00 82:746b 83:7f69 84:6163 85:7469 86:3c49 87:6163
> 88:003f
> ata1: dev 0 ATA-7, max UDMA/100, 234441648 sectors: LBA48
> ata1: dev 0 configured for UDMA/100
> scsi0 : sata_sis
> ata2: SATA link down (SStatus 0)
> scsi1 : sata_sis
> Vendor: ATA Model: Hitachi HTS54161 Rev: SBDO
> Type: Direct-Access ANSI SCSI revision: 05
> SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: drive cache: write back
> SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: drive cache: write back
> sda:<6>Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps:
> 0xa04713/0x10008
> input: SynPS/2 Synaptics TouchPad as /class/input/input1
> sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
> sd 0:0:0:0: Attached scsi disk sda
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> ts: Compaq touchscreen protocol output
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 17
> ohci_hcd 0000:00:03.0: OHCI Host Controller
> ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
> ohci_hcd 0000:00:03.0: irq 17, io mem 0xfebff000
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 4 ports detected
> ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 18
> ohci_hcd 0000:00:03.1: OHCI Host Controller
> ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:03.1: irq 18, io mem 0xfebfe000
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 4 ports detected
> ACPI: PCI Interrupt 0000:00:03.3[C] -> GSI 22 (level, low) -> IRQ 19
> ehci_hcd 0000:00:03.3: EHCI Host Controller
> ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
> ehci_hcd 0000:00:03.3: irq 19, io mem 0xfebfd000
> ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 8 ports detected
> usb 3-8: new high speed USB device using ehci_hcd and address 3
> usb 3-8: configuration #1 chosen from 1 choice
> Initializing USB Mass Storage driver...
> usb 2-2: new low speed USB device using ohci_hcd and address 2
> usb 2-2: configuration #1 chosen from 1 choice
> scsi2 : SCSI emulation for USB Mass Storage devices
> usbcore: registered new driver usb-storage
> USB Mass Storage support registered.
> usb-storage: device found at 3
> usb-storage: waiting for device to settle before scanning
> usbcore: registered new driver hiddev
> input: Logitech Logitech USB Optical Mouse as /class/input/input2
> input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on
> usb-0000:00:03.1-2
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> usbcore: registered new driver usbmouse
> drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
> Non-volatile memory driver v1.2
> Asus Laptop ACPI Extras version 0.29
> no string returned by INIT
> trying default values, supply the developers with your DSDT
> ACPI: CPU0 (power states: C1[C1] C2[C2])
> ACPI: Processor [CPU1] (supports 8 throttling states)
> ACPI: CPU1 (power states: C1[C1] C2[C2])
> ACPI: Processor [CPU2] (supports 8 throttling states)
> ACPI Error (exoparg2-0397): Index value (0FFFFFFFB) beyond package end (A)
> [20060127]
> ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU1._PSS]
> (Node f797b1e0), AE_AML_PACKAGE_LIMIT
> ACPI Error (exoparg2-0397): Index value (0FFFFFFFB) beyond package end (A)
> [20060127]
> ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU2._PSS]
> (Node f797bbc0), AE_AML_PACKAGE_LIMIT
> device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel на redhat.com
> EXT3 FS on sda5, internal journal
> Vendor: Generic- Model: xD/SDMMC/MS/Pro Rev: 1.00
> Type: Direct-Access ANSI SCSI revision: 00
> sd 2:0:0:0: Attached scsi removable disk sdb
> usb-storage: device scan complete
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> sd 2:0:0:0: Attached scsi generic sg1 type 0
> Adding 524244k swap on /dev/sda8. Priority:-1 extents:1 across:524244k
> SGI XFS with ACLs, large block numbers, no debug enabled
> SGI XFS Quota Management subsystem
> XFS mounting filesystem sda7
> Ending clean XFS mount for filesystem: sda7
> NTFS driver 2.1.27 [Flags: R/O DEBUG MODULE].
> NTFS volume version 3.1.
> XFS mounting filesystem sda6
> Ending clean XFS mount for filesystem: sda6
> loop: loaded (max 8 devices, max 1 partitions per device)
> hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 221104
> bytes,<6>...found (1024x768, 221056 bytes, v3).
> bootsplash: status on console 0 changed to on
> ACPI: AC Adapter [AC0] (on-line)
> Netfilter messages via NETLINK v0.30.
> ACPI: Battery Slot [BAT0] (battery present)
> ACPI: Power Button (FF) [PWRF]
> ACPI: Lid Switch [LID]
> ACPI: Power Button (CM) [PWRB]
> ACPI: Sleep Button (CM) [SLPB]
> Using specific hotkey driver
> ip_conntrack version 2.4 (8189 buckets, 65512 max) - 224 bytes per conntrack
> ACPI: Thermal Zone [THRM] (56 C)
> ACPI: Video Device [VGA_P0P1] (multi-head: yes rom: no post: no)
> Removing netfilter NETLINK layer.
> NET: Registered protocol family 17
> 8139too Fast Ethernet driver 0.9.27
> ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 16
> eth0: RealTek RTL8139 at 0xf91b6c00, 00:1b:fc:48:37:09, IRQ 16
> eth0: Identified 8139 chip type 'RTL-8100B/8139D'
> eth0: link down
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> IPv6 over IPv4 tunneling driver
> Installing knfsd (copyright (C) 1996 okir на monad.swb.de).
> NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> NFSD: starting 90-second grace period
> bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768,
> 19271 bytes, v3).
> bootsplash: status on console 0 changed to on
> bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768,
> 19271 bytes, v3).
> bootsplash: status on console 1 changed to on
> bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768,
> 19271 bytes, v3).
> bootsplash: status on console 2 changed to on
> bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768,
> 19271 bytes, v3).
> bootsplash: status on console 3 changed to on
> bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768,
> 19271 bytes, v3).
> bootsplash: status on console 4 changed to on
> bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768,
> 19271 bytes, v3).
> bootsplash: status on console 5 changed to on
> usb 3-1: new high speed USB device using ehci_hcd and address 4
> usb 3-1: configuration #1 chosen from 1 choice
> scsi3 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 4
> usb-storage: waiting for device to settle before scanning
> Vendor: USB Model: FLASH DISK Rev: 2.00
> Type: Direct-Access ANSI SCSI revision: 02
> ready
> SCSI device sdc: 256000 512-byte hdwr sectors (131 MB)
> sdc: Write Protect is off
> sdc: Mode Sense: 03 00 00 00
> sdc: assuming drive cache: write through
> SCSI device sdc: 256000 512-byte hdwr sectors (131 MB)
> sdc: Write Protect is off
> sdc: Mode Sense: 03 00 00 00
> sdc: assuming drive cache: write through
> sdc: sdc1 sdc2
> sd 3:0:0:0: Attached scsi removable disk sdc
> sd 3:0:0:0: Attached scsi generic sg2 type 0
> usb-storage: device scan complete
> EXT2-fs warning: mounting fs with errors, running e2fsck is recommended
> EXT2-fs error (device sdc2): ext2_check_page: bad entry in directory #2:
> unaligned directory entry - offset=0, inode=4294967295, rec_len=65535,
> name_len=255
> EXT2-fs error (device sdc2): ext2_readdir: bad page in #2
> EXT2-fs error (device sdc2): ext2_readdir: bad page in #2
>
>
> --
> Салют, /GLeb
>
> UIN: 15341920
> jabber://gleb@asd.iao.ru
> sip://2387245@sipnet.ru (telephony)
> skype://gleb_kulikov.tomsk (telephony)
> sip://20000204@sip.pctel.ru (telephony)
> netmail: 2:5005/78
> _______________________________________________
> Sisyphus mailing list
> Sisyphus на lists.altlinux.org
> https://lists.altlinux.org/mailman/listinfo/sisyphus
Подробная информация о списке рассылки Sisyphus