[sisyphus] [Comm] desktop/server 4 OR compact3 + Asus X50 Vseries == ПРОЛЁТ ? :(
Gleb Kulikov
=?iso-8859-1?q?glebus_=CE=C1_asd=2Eiao=2Eru?=
Ср Авг 1 18:44:43 MSD 2007
В сообщении от Среда 01 августа 2007 Aleksey Novodvorsky написал:
> On 8/1/07, Gleb Kulikov <glebus на asd.iao.ru> wrote:
> > В сообщении от Среда 01 августа 2007 Aleksey Novodvorsky написал:
> > > Если он у кого-то есть в msk и можно занести в наш офис, -- сообщите,
> > > пощупаем.
Диски увидела Мандрива 2007 (что не помешало ей зависнуть на подгрузке
HAL/ALSы. пришлось закомментировать загрузку/выгрузку модулей в modules.
uname -a:
Linux localhost 2.6.17-5mdv #1 SMP Wed Sep 13 14:32:31 EDT 2006 i686 Genuine
Intel(R) CPU T2130 @ 1.86GHz GNU/Linux
+++++++++++++++++++
lsmod:
Module Size Used by
nls_iso8859_1 4800 1
nls_cp437 6464 1
vfat 11104 1
fat 46876 1 vfat
nfsd 216248 17
ipv6 237120 16
exportfs 5536 1 nfsd
lockd 56360 2 nfsd
nfs_acl 3776 1 nfsd
sunrpc 137532 12 nfsd,lockd,nfs_acl
8139too 22880 0
mii 5664 1 8139too
af_packet 17960 0
video 13924 0
thermal 11240 0
fan 4036 0
container 3968 0
button 5808 0
battery 8260 0
ac 4292 0
ide_cd 35776 0
binfmt_misc 9800 1
loop 15400 0
nls_utf8 2624 1
ntfs 266940 1
xfs 573880 2
sg 30776 0
dm_mod 49944 0
cpufreq_ondemand 6956 0
cpufreq_conservative 6952 0
cpufreq_powersave 2400 0
freq_table 4800 0
processor 21448 1 thermal
asus_acpi 10324 0
nvram 8104 0
usbmouse 5280 0
usbhid 49024 0
usb_storage 88452 2
ehci_hcd 29160 0
ohci_hcd 19012 0
usbcore 113472 6 usbmouse,usbhid,usb_storage,ehci_hcd,ohci_hcd
tsdev 7040 0
evdev 8864 1
joydev 8928 0
ext3 124936 1
jbd 51028 1 ext3
sd_mod 18368 9
sata_sis 6852 5
libata 60620 1 sata_sis
scsi_mod 118376 4 sg,usb_storage,sd_mod,libata
++++++++++++++++++++++++++
modules:
# /etc/modules: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line. Comments begin with
# a `#', and everything on the line after them are ignored.
nvram
evdev
asus_acpi
++++++++++++++++++++++++++++++++
modprobe.preload:
# /etc/modprobe.preload: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line. Comments begin with
# a `#', and everything on the line after them are ignored.
# this file is for module-init-tools (kernel 2.5 and above) ONLY
# for old kernel use /etc/modules
nvram
evdev
asus_acpi
+++++++++++++++++++++++++++++++++++++++++++++
lspci:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] Unknown device 0671
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] Unknown device 0968 (rev
01)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:05.0 IDE interface: Silicon Integrated Systems [SiS] Unknown device 1183
(rev 03)
00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:0f.0 Audio device: Silicon Integrated Systems [SiS] Unknown device 7502
01:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 718a
02:00.0 Ethernet controller: Atheros Communications, Inc. Unknown device 001c
(rev 01)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
dmesg:
Linux version 2.6.17-5mdv (rtp на octopus.mandriva.com) (gcc version 4.1.1
20060724 (prerelease) (4.1.1-3mdk)) #1 SMP Wed Sep 13 14:32:31 EDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
BIOS-e820: 000000003ffbe000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
895MB LOWMEM available.
On node 0 totalpages: 262064
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225279 pages, LIFO batch:31
HighMem zone: 32689 pages, LIFO batch:7
DMI present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f8db0
ACPI: RSDT (v001 _ASUS_ Notebook 0x20070402 MSFT 0x00000097) @ 0x3ffb0000
ACPI: FADT (v002 040207 FACP0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0200
ACPI: MADT (v001 040207 APIC0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0390
ACPI: MCFG (v001 040207 OEMMCFG 0x20070402 MSFT 0x00000097) @ 0x3ffb03f0
ACPI: SLIC (v001 _ASUS_ Notebook 0x20070402 MSFT 0x00000097) @ 0x3ffb0430
ACPI: WDRT (v001 040207 OEMWDRT 0x20070402 MSFT 0x00000097) @ 0x3ffb05b0
ACPI: BOOT (v001 040207 BOOT0939 0x20070402 MSFT 0x00000097) @ 0x3ffb0600
ACPI: OEMB (v001 040207 OEMB0939 0x20070402 MSFT 0x00000097) @ 0x3ffbe040
ACPI: DSDT (v001 A0714 A0714002 0x00000002 INTL 0x20051117) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=linux root=805 splash=silent
bootsplash: silent mode.
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1866.405 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1033376k/1048256k available (2426k kernel code, 13592k reserved, 756k
data, 244k init, 130756k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3761.84 BogoMIPS
(lpj=7523692)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000
0000c189 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189
00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c189
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
checking if image is initramfs... it is
Freeing initrd memory: 640k freed
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3732.58 BogoMIPS
(lpj=7465176)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000
0000c189 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189
00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c189
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c
Total of 2 processors activated (7494.43 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... works.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=8000
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 25) interrupt mode.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 11 12 14)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: a000-afff
MEM window: fa900000-fa9fffff
PREFETCH window: aff00000-bfefffff
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: faa00000-faafffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: b000-cfff
MEM window: fab00000-feafffff
PREFETCH window: bff00000-dfefffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag value 0xc0 read from CMOS RAM was invalid
Simple Boot Flag at 0xff set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1186006968.576:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:01.0 to 64
pcie_portdrv_probe->Dev[0004:1039] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
pcie_portdrv_probe->Dev[000a:1039] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
PCI: Setting latency timer of device 0000:00:07.0 to 64
pcie_portdrv_probe->Dev[000a:1039] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
Allocate Port Service[0000:00:07.0:pcie02]
vesafb: framebuffer at 0xb0000000, mapped to 0xf8880000, using 6144k, total
16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:aac2
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 221104
bytes,<6>...found (1024x768, 221056 bytes, v3).
Console: switching to colour frame buffer device 119x41
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 1
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS968 ATA 133 (2nd gen) controller
ide0: BM-DMA at 0xffe0-0xffe7, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
NET: Registered protocol family 1
Starting balanced_irq
Using IPI No-Shortcut mode
ACPI wakeup devices:
PCI0 USB USB2 HDA P0P6 P0P7 EUSB MAC S184 PWRB SLPB
ACPI: (supports S0 S1 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 244k freed
SCSI subsystem initialized
libata version 1.20 loaded.
sata_sis 0000:00:05.0: version 0.5-rtp
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 16
sata_sis 0000:00:05.0: Detected SiS182/1182/1183 chipset
ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 16
ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 16
input: AT Translated Set 2 keyboard as /class/input/input0
ata1: SATA link up <unknown> Gbps (SStatus 3)
ata1: dev 0 cfg 49:0f00 82:746b 83:7f69 84:6163 85:7469 86:3c49 87:6163
88:003f
ata1: dev 0 ATA-7, max UDMA/100, 234441648 sectors: LBA48
ata1: dev 0 configured for UDMA/100
scsi0 : sata_sis
ata2: SATA link down (SStatus 0)
scsi1 : sata_sis
Vendor: ATA Model: Hitachi HTS54161 Rev: SBDO
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda:<6>Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps:
0xa04713/0x10008
input: SynPS/2 Synaptics TouchPad as /class/input/input1
sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: Attached scsi disk sda
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ts: Compaq touchscreen protocol output
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 17
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 17, io mem 0xfebff000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 18
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 18, io mem 0xfebfe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:03.3[C] -> GSI 22 (level, low) -> IRQ 19
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:03.3: irq 19, io mem 0xfebfd000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
usb 3-8: new high speed USB device using ehci_hcd and address 3
usb 3-8: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
usb 2-2: new low speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver hiddev
input: Logitech Logitech USB Optical Mouse as /class/input/input2
input: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on
usb-0000:00:03.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
Non-volatile memory driver v1.2
Asus Laptop ACPI Extras version 0.29
no string returned by INIT
trying default values, supply the developers with your DSDT
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU2] (supports 8 throttling states)
ACPI Error (exoparg2-0397): Index value (0FFFFFFFB) beyond package end (A)
[20060127]
ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU1._PSS]
(Node f797b1e0), AE_AML_PACKAGE_LIMIT
ACPI Error (exoparg2-0397): Index value (0FFFFFFFB) beyond package end (A)
[20060127]
ACPI Error (psparse-0517): Method parse/execution failed [\_PR_.CPU2._PSS]
(Node f797bbc0), AE_AML_PACKAGE_LIMIT
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel на redhat.com
EXT3 FS on sda5, internal journal
Vendor: Generic- Model: xD/SDMMC/MS/Pro Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
sd 2:0:0:0: Attached scsi removable disk sdb
usb-storage: device scan complete
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
Adding 524244k swap on /dev/sda8. Priority:-1 extents:1 across:524244k
SGI XFS with ACLs, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem sda7
Ending clean XFS mount for filesystem: sda7
NTFS driver 2.1.27 [Flags: R/O DEBUG MODULE].
NTFS volume version 3.1.
XFS mounting filesystem sda6
Ending clean XFS mount for filesystem: sda6
loop: loaded (max 8 devices, max 1 partitions per device)
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 221104
bytes,<6>...found (1024x768, 221056 bytes, v3).
bootsplash: status on console 0 changed to on
ACPI: AC Adapter [AC0] (on-line)
Netfilter messages via NETLINK v0.30.
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
Using specific hotkey driver
ip_conntrack version 2.4 (8189 buckets, 65512 max) - 224 bytes per conntrack
ACPI: Thermal Zone [THRM] (56 C)
ACPI: Video Device [VGA_P0P1] (multi-head: yes rom: no post: no)
Removing netfilter NETLINK layer.
NET: Registered protocol family 17
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 16
eth0: RealTek RTL8139 at 0xf91b6c00, 00:1b:fc:48:37:09, IRQ 16
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
eth0: link down
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6 over IPv4 tunneling driver
Installing knfsd (copyright (C) 1996 okir на monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768,
19271 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768,
19271 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768,
19271 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768,
19271 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768,
19271 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768,
19271 bytes, v3).
bootsplash: status on console 5 changed to on
usb 3-1: new high speed USB device using ehci_hcd and address 4
usb 3-1: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
Vendor: USB Model: FLASH DISK Rev: 2.00
Type: Direct-Access ANSI SCSI revision: 02
ready
SCSI device sdc: 256000 512-byte hdwr sectors (131 MB)
sdc: Write Protect is off
sdc: Mode Sense: 03 00 00 00
sdc: assuming drive cache: write through
SCSI device sdc: 256000 512-byte hdwr sectors (131 MB)
sdc: Write Protect is off
sdc: Mode Sense: 03 00 00 00
sdc: assuming drive cache: write through
sdc: sdc1 sdc2
sd 3:0:0:0: Attached scsi removable disk sdc
sd 3:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
EXT2-fs warning: mounting fs with errors, running e2fsck is recommended
EXT2-fs error (device sdc2): ext2_check_page: bad entry in directory #2:
unaligned directory entry - offset=0, inode=4294967295, rec_len=65535,
name_len=255
EXT2-fs error (device sdc2): ext2_readdir: bad page in #2
EXT2-fs error (device sdc2): ext2_readdir: bad page in #2
--
Салют, /GLeb
UIN: 15341920
jabber://gleb@asd.iao.ru
sip://2387245@sipnet.ru (telephony)
skype://gleb_kulikov.tomsk (telephony)
sip://20000204@sip.pctel.ru (telephony)
netmail: 2:5005/78
Подробная информация о списке рассылки Sisyphus