[sisyphus] Пакетаная запись на CD в ядре 2.6.8-std26-up-alt9

[Yura Zotov]

Почему-то не работает пакетная запись на CD.

# cdrwtool -d /dev/hdd -t 10
using device /dev/hdd
setting speed to 10
1222KB internal buffer
setting write speed to 10x
wait_cmd: Input/output error
Command failed: 55 10 00 00 00 00 00 00 3c 00 00 00 - sense 05.26.00
00 00 00 00 00 00 00 00 05 32 20 27 0a 00 00 00 20 00 00 00 00 20
00 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00
mode_select: Illegal seek
set_write

# mkudffs /dev/pktcdvd0
start=0, blocks=16, type=RESERVED
start=16, blocks=3, type=VRS
start=19, blocks=237, type=USPACE
start=256, blocks=1, type=ANCHOR
start=257, blocks=16, type=PVDS
start=273, blocks=1, type=LVID
start=274, blocks=484, type=PSPACE
start=758, blocks=1, type=ANCHOR
start=759, blocks=239, type=USPACE
start=998, blocks=16, type=RVDS
start=1014, blocks=1, type=ANCHOR

после этого в dmesg вот что

hdd: command error: error=0x50
end_request: I/O error, dev hdd, sector 3032
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev hdd, sector 3040
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev hdd, sector 3048
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev hdd, sector 3056
hdd: command error: stahdd: command error: error=0x50
end_request: I/O error, dev hdd, sector 3064


# hdparm -i /dev/hdd

/dev/hdd:

 Model=PIONEER DVD-RW DVR-106D, FwRev=1.07, SerialNo=CEDL126063WL
 Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
 RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
 BuffType=13395, BuffSize=64kB, MaxMultSect=0
 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
 IORDY=on/off, tPIO={min:240,w/IORDY:120},
 tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 *udma2
 AdvancedPM=no
 Drive conforms to: device does not report version:


--
Юрий А. Зотов