[sisyphus] Проблема с snmp+mrtg

[Vladimir Cherednichenko]

В сообщении от Четверг 01 Июль 2004 12:51 Andrei Bulava написал(a):
> On Thu, 1 Jul 2004, Vladimir Cherednichenko wrote:
> > в логах snmpd  вот такая картина:
> > Warning: no access control information configured.
> >   It's unlikely this agent can serve any useful purpose in
> > this state.
> >   Run "snmpconf -g basic_setup" to help you configure the
> > snmpd.conf file for
> > this agent.
> > NET-SNMP version 5.1
>
> Приведите вывод
>
> cat /etc/snmp/snmpd.conf|egrep "com2sec|group|access"|grep -v
> "^#"
>
> В конфигурации "из коробки" snmpd допускает только 127.0.0.1:
> com2sec local     127.0.0.1       private
> com2sec mynetwork 127.0.0.1/32       public
> group MyRWGroup v1         local
> group MyRWGroup v2c        local
> group MyRWGroup usm        local
> group MyROGroup v1         mynetwork
> group MyROGroup v2c        mynetwork
> group MyROGroup usm        mynetwork
> access MyROGroup ""      any       noauth    exact  all    none
> none
> access MyRWGroup ""      any       noauth    exact  all    all
> none

cat /etc/snmp/snmpd.conf|egrep "com2sec|group|access"|grep -v "^#"

com2sec local     127.0.0.1             private
com2sec mynetwork 192.168.168.0/24      comm
com2sec mynetwork 127.0.0.1             public
group MyROGroup v1         mynetwork
group MyROGroup v2c        mynetwork
group MyROGroup usm        mynetwork
access MyROGroup ""      any       noauth    exact  all    none   none

-- 
Best Regards, Vladimir Cherednichenko  
R.E.D Team | Admin
Ukraine | Kiev