[Comm] ALD4 и wifi - не работает?

[Paco qw]

Имеем zyxel 330w, раздающий адреса по dhcp и ноут с wifi

Запустили alterator, добавили сеть, провеhяем настройки сетевого адаптера

# cat /etc/net/ifaces/eth1/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
update_config=1

network={
        ssid="Albion"
        psk="Super11_Puper-AC"
        proto=WPA
        key_mgmt=WPA-PSK
        pairwise=TKIP
}

# iwlist eth1 scan
eth1      Scan completed :
          Cell 01 - Address: 00:19:CB:13:4E:7B
                    ESSID:"<hidden>"
                    Protocol:IEEE 802.11bg
                    Mode:Master
                    Channel:1
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
                              48 Mb/s; 54 Mb/s
                    Quality=98/100  Signal level=-26 dBm  Noise level=-26
dBm
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    Extra: Last beacon: 312ms ago

запускаем network
# service network start
Computing interface groups: ... 3 interfaces found
Starting group 0/virtual (1 interfaces)
        Starting lo: ....OK
Starting group 1/realphys (2 interfaces)
        Starting eth0: ...!.OK
        Starting eth1: ..OK
Processing /etc/net/vlantab: empty.

# ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:19:DB:3D:05:4C
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:680 errors:0 dropped:0 overruns:0 frame:0
          TX packets:790 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:196576 (191.9 KiB)  TX bytes:81418 (79.5 KiB)
          Interrupt:177 Base address:0xd800

eth1      Link encap:Ethernet  HWaddr 00:18:DE:11:CB:DC
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:84 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:185 Base address:0x8000 Memory:fdeff000-fdefffff

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:9 errors:0 dropped:0 overruns:0 frame:0
          TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:831 (831.0 b)  TX bytes:831 (831.0 b)

# dhcpcd eth1
.... и бесконечно ждём ответа

запускаем alterator, edit, apply

рестартим network и получаем

# service network restart
Computing interface groups: ... 3 interfaces found
Processing /etc/net/vlantab: empty.
Stopping group 1/realphys (2 interfaces)
        Stopping eth0: ..OK
        Stopping eth1: OK
Stopping group 0/virtual (1 interfaces)
        Stopping lo: .OK
Computing interface groups: ... 3 interfaces found
Starting group 0/virtual (1 interfaces)
        Starting lo: ....OK
Starting group 1/realphys (2 interfaces)
        Starting eth0: ...!.OK
        Starting eth1: ..ctrl_iface exists and seems to be in use - cannot
override it
Delete '/var/run/wpa_supplicant/eth1' manually if it is not used anymore
Failed to initialize control interface '/var/run/wpa_supplicant'.
You may have another wpa_supplicant process already running or the file was
left by an unclean termination of wpa_supplicant in which case you will need
to manually remove this file before starting wpa_supplicant again.

Processing /etc/net/vlantab: empty.

Ну и как тут быть, куда плыть?
----------- следующая часть -----------
Вложение в формате HTML было удалено...
URL: <http://lists.altlinux.org/pipermail/community/attachments/20071211/3bd418ab/attachment-0002.html>