Имеем zyxel 330w, раздающий адреса по dhcp и ноут с wifi<br><br>Запустили alterator, добавили сеть, провеhяем настройки сетевого адаптера <br><br># cat /etc/net/ifaces/eth1/wpa_supplicant.conf<br>ctrl_interface=/var/run/wpa_supplicant
<br>update_config=1<br><br>network={<br> ssid="Albion"<br> psk="Super11_Puper-AC"<br> proto=WPA<br> key_mgmt=WPA-PSK<br> pairwise=TKIP<br>}<br><br># iwlist eth1 scan<br>
eth1 Scan completed :<br> Cell 01 - Address: 00:19:CB:13:4E:7B<br> ESSID:"<hidden>"<br> Protocol:IEEE 802.11bg<br> Mode:Master<br> Channel:1
<br> Encryption key:on<br> Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s<br> 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s<br> 48 Mb/s; 54 Mb/s
<br> Quality=98/100 Signal level=-26 dBm Noise level=-26 dBm<br> IE: WPA Version 1<br> Group Cipher : TKIP<br> Pairwise Ciphers (1) : TKIP
<br> Authentication Suites (1) : PSK<br> Extra: Last beacon: 312ms ago<br><br>запускаем network<br># service network start<br>Computing interface groups: ... 3 interfaces found<br>
Starting group 0/virtual (1 interfaces)<br> Starting lo: ....OK<br>Starting group 1/realphys (2 interfaces)<br> Starting eth0: ...!.OK<br> Starting eth1: ..OK<br>Processing /etc/net/vlantab: empty.<br>
<br># ifconfig -a<br>eth0 Link encap:Ethernet HWaddr 00:19:DB:3D:05:4C<br> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1<br> RX packets:680 errors:0 dropped:0 overruns:0 frame:0<br> TX packets:790 errors:0 dropped:0 overruns:0 carrier:0
<br> collisions:0 txqueuelen:1000<br> RX bytes:196576 (191.9 KiB) TX bytes:81418 (79.5 KiB)<br> Interrupt:177 Base address:0xd800<br><br>eth1 Link encap:Ethernet HWaddr 00:18:DE:11:CB:DC<br>
UP BROADCAST MULTICAST MTU:1500 Metric:1<br> RX packets:0 errors:0 dropped:84 overruns:0 frame:0<br> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0<br> collisions:0 txqueuelen:1000
<br> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)<br> Interrupt:185 Base address:0x8000 Memory:fdeff000-fdefffff<br><br>lo Link encap:Local Loopback<br> inet addr:<a href="http://127.0.0.1">127.0.0.1
</a> Mask:<a href="http://255.0.0.0">255.0.0.0</a><br> UP LOOPBACK RUNNING MTU:16436 Metric:1<br> RX packets:9 errors:0 dropped:0 overruns:0 frame:0<br> TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
<br> collisions:0 txqueuelen:0<br> RX bytes:831 (831.0 b) TX bytes:831 (831.0 b)<br><br># dhcpcd eth1<br>.... и бесконечно ждём ответа<br><br>запускаем alterator, edit, apply<br><br>рестартим network и получаем
<br><br># service network restart<br>Computing interface groups: ... 3 interfaces found<br>Processing /etc/net/vlantab: empty.<br>Stopping group 1/realphys (2 interfaces)<br> Stopping eth0: ..OK<br> Stopping eth1: OK
<br>Stopping group 0/virtual (1 interfaces)<br> Stopping lo: .OK<br>Computing interface groups: ... 3 interfaces found<br>Starting group 0/virtual (1 interfaces)<br> Starting lo: ....OK<br>Starting group 1/realphys (2 interfaces)
<br> Starting eth0: ...!.OK<br> Starting eth1: ..ctrl_iface exists and seems to be in use - cannot override it<br>Delete '/var/run/wpa_supplicant/eth1' manually if it is not used anymore<br>Failed to initialize control interface '/var/run/wpa_supplicant'.
<br>You may have another wpa_supplicant process already running or the file was<br>left by an unclean termination of wpa_supplicant in which case you will need<br>to manually remove this file before starting wpa_supplicant again.
<br><br>Processing /etc/net/vlantab: empty.<br><br>Ну и как тут быть, куда плыть?<br><br>