[d-kernel] [PATCH 7/7] arm64: dts: rk3588-thin_88rk-1a: enable second hdmi output

[Ivan A. Melnikov]

On Wed, Feb 11, 2026 at 12:41:19PM +0400, Daniil Gnusarev wrote:
> Enable HDMI1 output in dts for the thin_88rk-1a board
> 
> Signed-off-by: Daniil Gnusarev <gnusarevda at basealt.ru>
> ---
>  .../edelweiss/rk3588-thin_88rk-1a-common.dtsi | 56 +++++++++++++++++++
>  1 file changed, 56 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/edelweiss/rk3588-thin_88rk-1a-common.dtsi b/arch/arm64/boot/dts/edelweiss/rk3588-thin_88rk-1a-common.dtsi
> index c34f31de6f2e7..447faa2b638de 100644
> --- a/arch/arm64/boot/dts/edelweiss/rk3588-thin_88rk-1a-common.dtsi
> +++ b/arch/arm64/boot/dts/edelweiss/rk3588-thin_88rk-1a-common.dtsi
> @@ -117,6 +117,17 @@ hdmi0_con_in: endpoint {
>  		};
>  	};
>  
> +	hdmi1-con {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi1_con_in: endpoint {
> +				remote-endpoint = <&hdmi1_out_con>;
> +			};
> +		};
> +	};
> +
>  	vcc_12v0_pcie3x4: regulator-vcc-12v0-pcie3x4 {
>  		compatible = "regulator-fixed";
>  		regulator-name = "vcc_12v0_pcie3x4";
> @@ -501,6 +512,24 @@ &gmac0_rgmii_clk
>  };
>  
>  &vop {
> +	clocks = <&cru ACLK_VOP>,
> +		 <&cru HCLK_VOP>,
> +		 <&cru DCLK_VOP0>,
> +		 <&cru DCLK_VOP1>,
> +		 <&cru DCLK_VOP2>,
> +		 <&cru DCLK_VOP3>,
> +		 <&cru PCLK_VOP_ROOT>,
> +		 <&hdptxphy_hdmi0>,
> +		 <&hdptxphy1>;
> +	clock-names = "aclk",
> +		      "hclk",
> +		      "dclk_vp0",
> +		      "dclk_vp1",
> +		      "dclk_vp2",
> +		      "dclk_vp3",
> +		      "pclk_vop",
> +		      "pll_hdmiphy0",
> +		      "pll_hdmiphy1";
>  	status = "okay";
>  };
>  
> @@ -515,6 +544,13 @@ vp0_out_hdmi0: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
>  	};
>  };
>  
> +&vp1 {
> +	vp1_out_hdmi1: endpoint at ROCKCHIP_VOP2_EP_HDMI1 {
> +		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
> +		remote-endpoint = <&hdmi1_in_vp1>;
> +	};
> +};
> +
>  &hdmi0 {
>  	pinctrl-0 = <&hdmim0_tx0_hpd &hdmim2_tx0_scl &hdmim2_tx0_sda>;
>  	status = "okay";
> @@ -532,10 +568,30 @@ hdmi0_out_con: endpoint {
>  	};
>  };
>  
> +&hdmi1 {
> +	status = "okay";
> +};
> +
> +&hdmi1_in {
> +	hdmi1_in_vp1: endpoint {
> +		remote-endpoint = <&vp1_out_hdmi1>;
> +	};
> +};
> +
> +&hdmi1_out {
> +	hdmi1_out_con: endpoint {
> +		remote-endpoint = <&hdmi1_con_in>;
> +	};
> +};
> +
>  &hdptxphy_hdmi0 {
>  	status = "okay";
>  };
>  
> +&hdptxphy1 {
> +	status = "okay";
> +};
> +
>  &spi2 {
>  	assigned-clocks = <&cru CLK_SPI2>;
>  	assigned-clock-rates = <200000000>;
> -- 
> 2.42.2

Reviewed-by: Ivan A. Melnikov <iv at altlinux.org>

-- 
  wbr,
    iv m.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 870 bytes
Desc: not available
URL: <http://lists.altlinux.org/pipermail/devel-kernel/attachments/20260818/d9b4c094/attachment.bin>