[Comm] samsung 4x16 сканер

[Анатолий]

Уважаемые знатоки.
Подскажите плиз:

Имею МФУ Samsung SCX 4216F 

Скачал с оф сайта универсальный драйвер.
Запустил. Установил дрова на принтер.
Проверил - все работает.

Начал ставить сканер. 
В 4.1 цеплялся сразу утилитой установки от самсунга сразу же и сканер.

Поставил sane поставил.
делаю
lsusb
===
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04e8:3409 Samsung Electronics Co., Ltd SCX-4216F
Scanner
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0458:003a KYE Systems Corp. (Mouse Systems)
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


запускаю 
sane-find-scanner
=====
  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make
sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

  # No USB scanners found. If you expected something different, make
sure that
  # you have loaded a kernel driver for your USB host controller and
have setup
  # the USB system correctly. See man sane-usb for details.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary
ports
  # can't be detected by this program.
-- 

Он не видит ни одного  сканера usb.

Куда копнуть?


-- 

С уважением, Акатьев Анатолий
atol123j на stopicq.ru