[Comm] desktop 20080919 - замечания, вопросы

[altlinuxuser]

Так что же делать с ACPI и Спящим режимом ?
Стоит ли вешать багу на пропадание после просмотра видео ?
Или может быть это только у меня не работает ?

Конец dmesg:

PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
PM: Shrinking memory...  -done (0 pages freed)
PM: Freed 0 kbytes in 0.05 seconds (0.00 MB/s)
Suspending console(s)
sd 2:0:0:0: [sda] Synchronizing SCSI cache
nsc-ircc 00:0a: disabled
ACPI handle has no context!
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:0f:06.3 disabled
ACPI handle has no context!
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:0f:06.2 disabled
ACPI handle has no context!
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:04:00.0 disabled
[fglrx] firegl_gps_setpowerdown .
ACPI: PCI interrupt for device 0000:01:00.0 disabled
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ACPI: PCI interrupt for device 0000:00:1f.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
usb_hcd_pci_suspend(): ehci_pci_suspend+0x0/0xb0 [ehci_hcd]() returns -22
pci_device_suspend(): usb_hcd_pci_suspend+0x0/0x160 [usbcore]() returns -22
suspend_device(): pci_device_suspend+0x0/0x60() returns -22
Could not suspend device 0000:00:1a.7: error -22
PM: Writing back config space on device 0000:00:1b.0 at offset f (was 
100, writing 10b)
PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, 
writing fc400004)
PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, 
writing 10)
PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 
100000, writing 100102)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 
2880001, writing 2880005)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.1 to 64
PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 
2b00003, writing 2b00007)
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
[fglrx:KCL_enable_pat] *ERROR* Pat entry 2 is already configured
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
[fglrx] firegl_gps_setpowerup .
PCI: Enabling device 0000:04:00.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PM: Writing back config space on device 0000:04:00.0 at offset f (was 
100, writing 10b)
PM: Writing back config space on device 0000:04:00.0 at offset 4 (was 0, 
writing f8000000)
PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 
100002, writing 100106)
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
PM: Writing back config space on device 0000:0f:06.1 at offset f (was 
4020100, writing 402010b)
PM: Writing back config space on device 0000:0f:06.1 at offset 5 (was 0, 
writing fc104000)
PM: Writing back config space on device 0000:0f:06.1 at offset 4 (was 0, 
writing fc102000)
PM: Writing back config space on device 0000:0f:06.1 at offset 3 (was 
800000, writing 802010)
PM: Writing back config space on device 0000:0f:06.1 at offset 1 (was 
2100000, writing 2100116)
ata4: SATA link down (SStatus 0 SControl 0)
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  
MMIO=[fc102000-fc1027ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
PM: Writing back config space on device 0000:0f:06.2 at offset f (was 
40701ff, writing 407010b)
PM: Writing back config space on device 0000:0f:06.2 at offset 4 (was 0, 
writing fc101000)
PM: Writing back config space on device 0000:0f:06.2 at offset 3 (was 
800000, writing 803910)
PM: Writing back config space on device 0000:0f:06.2 at offset 1 (was 
2100000, writing 2100106)
ACPI: PCI Interrupt 0000:0f:06.2[A] -> GSI 22 (level, low) -> IRQ 22
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
PM: Writing back config space on device 0000:0f:06.3 at offset f (was 
40701ff, writing 407010b)
PM: Writing back config space on device 0000:0f:06.3 at offset 4 (was 0, 
writing fc102800)
PM: Writing back config space on device 0000:0f:06.3 at offset 3 (was 
800000, writing 803910)
PM: Writing back config space on device 0000:0f:06.3 at offset 1 (was 
2100000, writing 2100106)
ACPI: PCI Interrupt 0000:0f:06.3[A] -> GSI 22 (level, low) -> IRQ 22
nsc-ircc 00:0a: activated
ata1.00: configured for UDMA/33
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
ata3.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't 
support DPO or FUA
sd 2:0:0:0: [sda] Starting disk
Restarting tasks ... done.