[Comm] Вместо сканера xsane видит только TV тюнер.

[Sharavin Sergey]

Здравствуйте.
Дистрибутив ALC-3.0 
При запуске xsane сканера не видит, только tv-тюнер.

$ scanimage -L
device `v4l:/dev/video0' is a Noname AverMedia AverTV Studio 305 virtual 
device

Хотя ниже он определился:

$ sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure 
that
  # you have loaded a SCSI driver for your SCSI adapter.
  # Also you need support for SCSI Generic (sg) in your operating system.
  # If using Linux, try "modprobe sg".

found USB scanner (vendor=0x04a9 [Canon], product=0x220e [CanoScan], 
chip=LM9832/3) at libusb:003:003
found USB scanner (vendor=0x067b, product=0x2303) at libusb:002:002
  # Your USB scanner was (probably) detected. It may or may not be supported 
by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.

Что посоветуете ?
С уважением.
Сергей.