[Comm] Oshibka s fd0

[Alexander]

20 Май 2003 17:32, Вы написали:
> On Tue, May 20, 2003 at 17:09:34 +0400, Keeper wrote:
> > Еще одна проблема: я не могу сконфигурировать Lilo. Место него у меня
> > выводятся одни 0 и 1.
>
> В man lilo:
>
>               01  invalid disk command
>
> В README.bz2 из пакета lilo написано, что эта ошибка может возникать при
> попытке доступа к диску, не поддерживаемому BIOS (например, с неверным
> номером диска).
>
> > В чем тут проблема??? А запускаюся я как раз с загрузочной дискеты.
>
> Какой диск, какая конфигурация разделов (вывод fdisk -l, содержимое
> /etc/fstab)?  Что выводит ядро (dmesg) по поводу дисков (можете послать
> весь вывод, только предварительно сожмите его bzip2 или gzip)?
>
> Какие ещё операционные системы установлены (и в какие разделы)?
>
> Что записано в /etc/lilo.conf?
>
> Используются ли какие-либо нестандартные способы загрузки (например,
> выбор в BIOS загрузки не с первого диска)?
> _______________________________________________
> Community mailing list
> Community на altlinux.ru
> http://www.altlinux.ru/mailman/listinfo/community
В fstab написано:
 /dev/hdd2 / ext2 defaults 1 1
/dev/hdd1 /boot ext2 defaults 1 2
none /dev/pts devpts mode=0620 0 0
/dev/cdrom /mnt/cdrom auto user,noauto,nosuid,exec,nodev,ro 0 0
/dev/fd0 /mnt/floppy auto 
sync,user,noauto,nosuid,nodev,exec,codepage=866,iocharset=koi8-r 0 0
/dev/hda1 /mnt/windows vfat user,noexec,umask=0,codepage=866,iocharset=koi8-r 
0 0
none /proc proc defaults 0 0
/dev/hdd3 swap swap defaults 0 0


dmesg выводит:
Linux version 2.4.10-alt1-up (goldhead на goldhead.office.altlinux.ru) (gcc 
version 2.96 20000731 (ALT Linux, build 2.96-ipl14mdk)) #1 Mon Oct 8 14:22:30 
MSD 2001
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linux root=1642 nobiospnp
Initializing CPU#0
Detected 233.868 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 465.30 BogoMIPS
Memory: 126668k/131072k available (851k kernel code, 4016k reserved, 227k 
data, 316k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0080a135 00000000 00000000, vendor = 1
CPU: After vendor init, caps: 0080a135 00000000 00000000 00000004
CPU:     After generic, caps: 0080a135 00000000 00000000 00000004
CPU:             Common caps: 0080a135 00000000 00000000 00000004
CPU: Cyrix M II 3.5x Core/Bus Clock stepping 03
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch на atnf.csiro.au)
mtrr: detected mtrr type: Cyrix ARR
PCI: PCI BIOS revision 2.10 entry at 0xfda01, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Cannot allocate resource region 0 of device 00:0a.0
Activating ISA DMA hang workarounds.
PnPBIOS: driver disabled.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 256 Unix98 ptys configured
block: queued sectors max/low 84093kB/28031kB, 256 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1
    ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:pio, hdd:DMA
hda: Maxtor 6E030L0, ATA DISK drive
hdb: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive
hdd: FUJITSU MPD3043AT, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=3738/255/63, UDMA(33)
hdd: 8448300 sectors (4326 MB) w/512KiB Cache, CHS=8940/15/63, UDMA(33)
Partition check:
 hda: hda1
 hdd: [PTBL] [525/255/63] hdd1 hdd2 hdd3
NET4: Frame Diverter 0.46
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 316k freed
Executing init=/sbin/init
Real Time Clock Driver v1.10e
Adding Swap: 257032k swap-space (priority -1)
apm: BIOS not found.
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
isapnp: Scanning for PnP cards...
isapnp: Card 'ESS ES1868 Plug and Play AudioDrive'
isapnp: 1 Plug & Play card detected total
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI 
ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
inserting floppy driver for 2.4.10-alt1-up
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: ESS ES1868 Plug and Play AudioDrive detected
sb: ISAPnP reports 'ESS ES1868 Plug and Play AudioDrive' at i/o 0x220, irq 5, 
dma 1, 3
SB 3.01 detected OK (220)
ESS chip ES1868 detected
<ESS ES1868 AudioDrive (rev 11) (3.01)> at 0x220 irq 5 dma 1,3
sb: ESS ES1868 Plug and Play AudioDrive detected
sb: Failed to initialize ESS ES1868 Plug and Play AudioDrive
sb: 1 Soundblaster PnP card(s) found.
apm: BIOS not found.
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
lp0: console ready
EXT2-fs: Unrecognized mount option umask
FAT: bogus logical sector size 5376
VFS: Can't find a valid FAT filesystem on dev 02:00.
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
EXT2-fs: Unrecognized mount option umask
floppy0: disk absent or changed during operation
end_request: I/O error, dev 02:00 (floppy), sector 19
floppy0: disk absent or changed during operation
end_request: I/O error, dev 02:00 (floppy), sector 8
floppy0: disk absent or changed during operation
end_request: I/O error, dev 02:00 (floppy), sector 9
floppy0: disk absent or changed during operation
end_request: I/O error, dev 02:00 (floppy), sector 17
floppy0: disk absent or changed during operation
end_request: I/O error, dev 02:00 (floppy), sector 18
floppy0: data CRC error: track 4, head 1, sector 10, size 2
floppy0: data CRC error: track 4, head 1, sector 10, size 2
end_request: I/O error, dev 02:00 (floppy), sector 171
floppy0: data CRC error: track 7, head 1, sector 10, size 2
floppy0: data CRC error: track 7, head 1, sector 11, size 2
floppy0: data CRC error: track 8, head 1, sector 12, size 2
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.1
divert: not allocating divert_blk for non-ethernet device ppp0
PPP BSD Compression module registered
PPP Deflate Compression module registered
divert: no divert_blk to free, ppp0 not ethernet

Кроме Linux на hda1 установлена Windows 2000 и все. Когда ставил Mandrake все 
было хорошо, но с Red Hat и Alt - нет.

В lilo.conf прописано:
boot = /dev/hda
map = /boot/map
delay = 100
timeout = 50
compact
linear
prompt
  message = /boot/message
  default = linux-up
  vga = 788
  read-only
install=/boot/boot.b
keytable=/boot/ru_ct_sh-KOI8-R.klt
menu-scheme=wb:bw:wb:bw
image = /boot/vmlinuz-up
  label = linux-up
  root = /dev/hdd2
image = /boot/vmlinuz-up
  label = failsafe
  append = " failsafe"
  root = /dev/hdd2
other = /dev/hda1
  label = windows
  table=/dev/hda
other = /dev/fd0
  label = floppy
  unsafe