[Comm] Индикатор раскладки
Dmitry Ivanov
=?iso-8859-1?q?dimss_=CE=C1_bigiron=2Esolutions=2Elv?=
Пн Июл 14 23:06:56 MSD 2003
On Mon, Jul 14, 2003 at 09:28:14AM +0400, Alexej Kryukov wrote:
> On Monday 14 July 2003 01:12, Dmitry Ivanov wrote:
> > >
> > > Оно может не работать, только если оконный менеджер сбрасывает
> > > настройки xkb. Вы случаем не в KDE работаете?
> >
> > fvwm. Вообще я разные применяю, но ни
> > с одним не работало. Может быть, дело
> > в моей раскладке? Она нестандартная.
> > Могу выслать на экспертизу.
>
> Ну, сначала надо бы посмотреть на соответствующую
> секцию конфига иксов на предмет конфликтующих
> вхождений.
Высылаю.
>
> Кстати, а что нестандартного в раскладке? Не с тремя
> ли она группами, включая латышскую? Если так, то
Именно так.
> существование подобных раскладок с новыми иксами
> (версии 4.3) потеряло смысл. Так что
Почему?
> непременно обновитесь до этой версии, если у Вас
> непросизифленный ALM/ALJ.
Делаю регулярный dist-upgrade :)
--
D.I.M.S.S.: Digital Intelligent Machine Skilled in Sabotage
----------- следующая часть -----------
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
#Option "XkbLayout" "ru"
Option "XKbLayout" "rulv(basic)"
#Option "XkbOptions" "grp:ctrl_toggle"
Option "XkbOptions" "grp:cat_tsd,,grp_led:scroll"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe"
# This loads the Video for Linux module.
Load "v4l"
Load "glx"
Load "dri"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
Section "DRI"
Mode 0666
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "monitor1"
VendorName "Unknown"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-85
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
ModeLine "1160x870" 119.42 1160 1208 1448 1544 870 872 884 910 #85Hz
ModeLine "1144x858" 109.77 1144 1192 1432 1528 858 860 872 898 #80Hz
ModeLine "1080x810" 99.55 1080 1128 1368 1464 810 812 824 850 #80Hz
ModeLine "1024x768" 98.97 1024 1072 1312 1408 768 770 782 808 #87Hz
DisplaySize 319 237
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "ATI Radeon"
VendorName "Unknown"
BoardName "Unknown"
Driver "radeon"
# VideoRam 65536
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "AGPMode" "1"
Option "DPMS" "off"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "screen1"
Device "ATI Radeon"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 24
#Modes "1160x870"
#Modes "1144x858"
Modes "1080x810"
#Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Подробная информация о списке рассылки community