kernel BUGREPORT was Re: [mdk-re] VIA Problem
Alexey Voinov
=?iso-8859-1?q?voins_=CE=C1_voins=2Eprogram=2Eru?=
Вт Апр 24 22:12:12 MSD 2001
Dmitry V. Levin wrote
> On Tue, Apr 24, 2001 at 11:40:43AM +0400, Arthur V.Sidorenko wrote:
> > Не расскажите, что в Spring изменилось с VIA-чипсетами?
> > Проблема такова: Проблема такова - время от времени исчезают
> > файлы. Проверка показывает, что бед-блоков нет, но куча проблем
> > с i-node. После исправления и доставления убитых файлов -
> > некоторое время работает (часа 2). Потом та же история.
> > Дисковую оптимизацию при установке отключил (с ней она сразу в
> > bash-е kernel-panic давала). Железо в общем неахти, но RH, 7.0
> > ну и конечно же Win работали без проблем. На винте IBM DJNA
> > SMART включен, но виндовый контроль его говорит - что все окей.
> > Чувствую что что-то она пытается оптимизировать, а зря.
> > Хотелось бы повоздействовать на процесс. Могу поприсылать
> > ошибок, если еще раз загрузиться. А так вся конфигурация
> > стандартная - 2.2.18 ядро, Мамка на VIA Apolo 133.
>
> Попробуйте ядро 2.2.19 из updates, там, помимо security fixes, обновлен
> IDE-driver, в т.ч. и для VIA. Расскажите о результатах, не забыв
> включить в письмо ту часть "lspci -v", где идет речь о Вашей плате.
Оно и видно, что IDE обновили. У меня сразу глюки со свопом начались.
dmesg.2.2.19
и
dmesg.2.2.18
в аттаче.
(было бы время занялся бы сам, а так его катастрофически не хватает)
--
Best Regards!
Alexey Voinov
voins на voins.program.ru
voins на online.ru
----------- следующая часть -----------
Linux version 2.2.18-ipl5mdk-up (ldv на basalt.office.altlinux.ru) (gcc version 2.95.3 19991030 ((Linux-Mandrake RE Spring 2001, for backwards compatibility)) #1 Sat Mar 17 21:39:18 MSK 2001
USER-provided physical RAM map:
USER: 0009f000 @ 00000000 (usable)
USER: 03f00000 @ 00100000 (usable)
Detected 399071 kHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 796.26 BogoMIPS
Memory: 62664k/65536k available (1300k kernel code, 408k reserved, 1088k data, 76k init, 0k bigmem)
Dentry hash table entries: 8192 (order 4, 64k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
Inode hash table entries: 8192 (64k), inode-max: 8192
VFS: Diskquotas version dquot_6.4.0 initialized
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
512K L2 cache (4 way)
CPU: L2 Cache: 512K
CPU: Intel Pentium II (Deschutes) stepping 01
Enabling fast FPU save and restore... done.
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch на atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xed6eb, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 65536 bhash 65536)
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
Linux IP multicast router 0.06 plus PIM-SM
Initializing RT netlink socket
Starting kswapd v 1.5
vesafb: framebuffer at 0x41000000, mapped to 0xc4809000, size 4096k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:48fc
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev a1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x20a0-0x20a7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x20a8-0x20af, BIOS settings: hdc:DMA, hdd:pio
hda: WDC AC36400L, ATA DISK drive
hdc: COMPAQ CR-587, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC AC36400L, 6149MB w/256kB Cache, CHS=833/240/63, UDMA(33)
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 891.159 MB/sec
p5_mmx : 928.878 MB/sec
8regs : 711.708 MB/sec
32regs : 384.429 MB/sec
using fastest function: p5_mmx (928.878 MB/sec)
scsi : 0 hosts.
scsi : detected total.
NET4: Frame Diverter 0.5
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2 < hda5 hda6 >
autodetecting RAID arrays
autorun ...
... autorun DONE.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 76k freed
Executing init=/sbin/init
Adding Swap: 143600k swap-space (priority -1)
EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
----------- следующая часть -----------
Linux version 2.2.19-alt2-up (ldv на altair.office.altlinux.ru) (gcc version 2.95.3 19991030 ((Linux-Mandrake RE Spring 2001, for backwards compatibility)) #1 Thu Apr 5 16:24:26 MSD 2001
USER-provided physical RAM map:
USER: 0009f000 @ 00000000 (usable)
USER: 03f00000 @ 00100000 (usable)
Detected 399066 kHz processor.
ide_setup: ide1=autotune
ide_setup: ide0=autotune
Console: colour dummy device 80x25
Calibrating delay loop... 796.26 BogoMIPS
Memory: 62656k/65536k available (1300k kernel code, 412k reserved, 1092k data, 76k init, 0k bigmem)
Dentry hash table entries: 8192 (order 4, 64k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
Inode hash table entries: 8192 (64k), inode-max: 8192
VFS: Diskquotas version dquot_6.4.0 initialized
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
512K L2 cache (4 way)
CPU: L2 Cache: 512K
CPU: Intel Pentium II (Deschutes) stepping 01
Enabling fast FPU save and restore... done.
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch на atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xed6eb, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 65536 bhash 65536)
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
Linux IP multicast router 0.06 plus PIM-SM
Initializing RT netlink socket
Starting kswapd v 1.5
vesafb: framebuffer at 0x41000000, mapped to 0xc4809000, size 4096k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:48fc
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev a1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x20a0-0x20a7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x20a8-0x20af, BIOS settings: hdc:DMA, hdd:pio
hda: WDC AC36400L, ATA DISK drive
hdc: COMPAQ CR-587, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC AC36400L, 6149MB w/256kB Cache, CHS=833/240/63, UDMA(33)
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 891.540 MB/sec
p5_mmx : 928.497 MB/sec
8regs : 712.470 MB/sec
32regs : 384.429 MB/sec
using fastest function: p5_mmx (928.497 MB/sec)
scsi : 0 hosts.
scsi : detected total.
NET4: Frame Diverter 0.5
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2 < hda5 hda6 >
autodetecting RAID arrays
autorun ...
... autorun DONE.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 76k freed
Executing init=/sbin/init
Adding Swap: 143600k swap-space (priority -1)
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: Write Cache FAILED Flushing!
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: Write Cache FAILED Flushing!
EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: Write Cache FAILED Flushing!
Подробная информация о списке рассылки community