[Comm-en] PROMISE FastTrak SX4000
Egor Grebnev
egor at altlinux.ru
Thu Mar 10 22:54:43 MSK 2005
Paul,
Hopefully, we will be able to tell you if there are any options to ship
Master to France tomorrow. Theoretically, it's simple (if you do not
mind the shipping costs), but you need someone to help you fill in the
payment forms on a Russian-language e-shop. Today I've asked them if
there is an alternative way.
Regarding your problem -- I have forwarded the message to Anton Farygin,
who konws the hardware part very well. Maybe he can help.
paul.collomb1 at libertysurf.fr wrote:
>Hello, your distribution seems to be the only one to recognize correctly the
>PROMISE FastTrak SX4000 at the installation.
>However, it seems that the configuration of the card is not complete.
>I join to this mail several system files to inform you on this problem.
>Could you help me for assistance ?
>Is it possible to install ALT Linux 2.4 Master directly on a raid0 disk ?
>Moreover, I would like to buy a complete distribution of ALT Linux 2.4 Master
>but in France it is not possible !
>Can you give me the procedure to purchase this distribution by
>correspondence. (I currently test the Iso image of the first disc).
>Best regards.
>
>Paul COLLOMB
>************************ ADSL JUSQU'A 8 MEGA + 3 MOIS DE TELEPHONE GRATUIT ************************
>L'ultra haut de'bit a` 15EUR/mois seulement ! Et vous te'le'phonez gratuitement en France vers les postes fixes,
>hors nume'ros spe'ciaux pendant 3 mois.
>Pour profiter de cette offre exceptionnelle, cliquez ici : http://register.tiscali.fr/adsl/ (voir conditions sur le site)
>
>
>------------------------------------------------------------------------
>
>Hello, your distribution seems to be the only one to recognize correctly the
>PROMISE FastTrak SX4000 at the installation.
>However, it seems that the configuration of the card is not complete.
>I join to this mail several system files to inform you on this problem.
>Could you help me for assistance ?
>Is it possible to install ALT Linux 2.4 Master directly on a raid0 disk ?
>Moreover, I would like to buy a complete distribution of ALT Linux 2.4 Master
>but in France it is not possible !
>Can you give me the procedure to purchase this distribution by
>correspondence. (I currently test the Iso image of the first disc).
>Best regards.
>
>Paul COLLOMB
>************************ ADSL JUSQU'A 8 MEGA + 3 MOIS DE TELEPHONE GRATUIT ************************
>L'ultra haut de'bit a` 15EUR/mois seulement ! Et vous te'le'phonez gratuitement en France vers les postes fixes,
>hors nume'ros spe'ciaux pendant 3 mois.
>Pour profiter de cette offre exceptionnelle, cliquez ici : http://register.tiscali.fr/adsl/ (voir conditions sur le site)
>
>
>------------------------------------------------------------------------
>
>BIOS Version: ASUS A7N8X-X ACPI BIOS Rev 1011
>BIOS Release: 08/04/2004
>System Vendor: ASUSTeK Computer INC.
>Product Name: A7N8X-X
>Version: REV 2.xx
>Serial Number: xxxxxxxxxxx
>Board Vendor: ASUSTeK Computer INC.
>Board Name: A7N8X-X
>Board Version: REV 2.xx
>ACPI: RSDP (v000 Nvidia ) @ 0x000f75c0
>ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
>ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
>ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff74c0
>ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 Pentium(tm) Pro APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
>IOAPIC[0]: Assigned apic_id 2
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>Using ACPI (MADT) for SMP configuration information
>Kernel command line: auto BOOT_IMAGE=linux-up ro root=301
>Initializing CPU#0
>Detected 1670.480 MHz processor.
>Console: colour dummy device 80x25
>Calibrating delay loop... 3335.78 BogoMIPS
>Memory: 515136k/524224k available (1235k kernel code, 8672k reserved, 508k data, 136k init, 0k highmem)
>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
>Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000
>CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000
>CPU: AMD Sempron(tm) 2400+ stepping 01
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>POSIX conformance testing by UNIFIX
>enabled ExtINT on CPU#0
>ESR value before enabling vector: 00000000
>ESR value after enabling vector: 00000000
>ENABLING IO-APIC IRQs
>init IO_APIC IRQs
> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
>..TIMER: vector=0x31 pin1=2 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ... failed.
>...trying to set up timer as Virtual Wire IRQ... failed.
>...trying to set up timer as ExtINT IRQ... works.
>Using local APIC timer interrupts.
>calibrating APIC timer ...
>..... CPU clock speed is 1670.5079 MHz.
>..... host bus clock speed is 334.1016 MHz.
>cpu: 0, clocks: 3341016, slice: 1670508
>CPU0<T0:3341008,T1:1670496,D:4,S:1670508,C:3341016>
>mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
>mtrr: detected mtrr type: Intel
>ACPI: Subsystem revision 20040326
>PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
>PCI: Using configuration type 1
>Looking for DSDT in initrd ... not found!
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: System [ACPI] (supports S0 S1 S4bios S4 S5)
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: nForce2 C1 Halt Disconnect fixup
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs *16)
>ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs *19)
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs *23)
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
>PCI: Probing PCI hardware
>ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
>00:00:01[A] -> 2-23 -> IRQ 23 level high
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>00:00:02[A] -> 2-22 -> IRQ 22 level high
>ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
>00:00:02[B] -> 2-21 -> IRQ 21 level high
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
>00:00:02[C] -> 2-20 -> IRQ 20 level high
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
>ACPI: PCI Interrupt Link [APCI] enabled at IRQ 21
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
>ACPI: PCI Interrupt Link [APCK] enabled at IRQ 22
>ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
>ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 20
>ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 22
>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
>00:01:06[A] -> 2-16 -> IRQ 16 level high
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>00:01:06[B] -> 2-17 -> IRQ 17 level high
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>00:01:06[C] -> 2-18 -> IRQ 18 level high
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>00:01:06[D] -> 2-19 -> IRQ 19 level high
>number of MP IRQ sources: 15.
>number of IO-APIC #2 registers: 24.
>testing the IO APIC.......................
>
>IO APIC #2......
>.... register #00: 02000000
>....... : physical APIC id: 02
>....... : Delivery Type: 0
>....... : LTS : 0
>.... register #01: 00170011
>....... : max redirection entries: 0017
>....... : PRQ implemented: 0
>....... : IO APIC version: 0011
>.... register #02: 00000000
>....... : arbitration: 00
>.... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> 00 000 00 1 0 0 0 0 0 0 00
> 01 001 01 0 0 0 0 0 1 1 39
> 02 000 00 1 0 0 0 0 0 0 00
> 03 001 01 0 0 0 0 0 1 1 41
> 04 001 01 0 0 0 0 0 1 1 49
> 05 001 01 0 0 0 0 0 1 1 51
> 06 001 01 0 0 0 0 0 1 1 59
> 07 001 01 1 0 0 0 0 1 1 61
> 08 001 01 0 0 0 0 0 1 1 69
> 09 001 01 0 1 0 0 0 1 1 71
> 0a 001 01 0 0 0 0 0 1 1 79
> 0b 001 01 0 0 0 0 0 1 1 81
> 0c 001 01 0 0 0 0 0 1 1 89
> 0d 001 01 0 0 0 0 0 1 1 91
> 0e 001 01 0 0 0 0 0 1 1 99
> 0f 001 01 0 0 0 0 0 1 1 A1
> 10 001 01 1 1 0 0 0 1 1 C9
> 11 001 01 1 1 0 0 0 1 1 D1
> 12 001 01 1 1 0 0 0 1 1 D9
> 13 001 01 1 1 0 0 0 1 1 E1
> 14 001 01 1 1 0 0 0 1 1 C1
> 15 001 01 1 1 0 0 0 1 1 B9
> 16 001 01 1 1 0 0 0 1 1 B1
> 17 001 01 1 1 0 0 0 1 1 A9
>IRQ to pin mappings:
>IRQ0 -> 0:2
>IRQ1 -> 0:1
>IRQ3 -> 0:3
>IRQ4 -> 0:4
>IRQ5 -> 0:5
>IRQ6 -> 0:6
>IRQ7 -> 0:7
>IRQ8 -> 0:8
>IRQ9 -> 0:9
>IRQ10 -> 0:10
>IRQ11 -> 0:11
>IRQ12 -> 0:12
>IRQ13 -> 0:13
>IRQ14 -> 0:14
>IRQ15 -> 0:15
>IRQ16 -> 0:16
>IRQ17 -> 0:17
>IRQ18 -> 0:18
>IRQ19 -> 0:19
>IRQ20 -> 0:20
>IRQ21 -> 0:21
>IRQ22 -> 0:22
>IRQ23 -> 0:23
>.................................... done.
>PCI: Using ACPI for IRQ routing
>Linux NET4.0 for Linux 2.4
>Based upon Swansea University Computer Society NET3.039
>Initializing RT netlink socket
>Starting kswapd
>kinoded started
>VFS: Disk quotas vdquot_6.5.1
>vesafb: framebuffer at 0xd0000000, mapped to 0xe0808000, size 1875k
>vesafb: mode is 800x600x16, linelength=1600, pages=67
>vesafb: protected mode interface info at c000:5282
>vesafb: scrolling: redraw
>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
>Looking for splash picture.... found (800x600, 42776 bytes, v2).
>Console: switching to colour frame buffer device 82x26
>fb0: VESA VGA frame buffer device
>pty: 256 Unix98 ptys configured
>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
>NET4: Frame Diverter 0.46
>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE2: IDE controller at PCI slot 00:09.0
>NFORCE2: chipset revision 162
>NFORCE2: not 100% native mode: will probe irqs later
>NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE2: 00:09.0 (rev a2) UDMA133 controller
> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
>hda: Maxtor 2B020H1, ATA DISK drive
>blk: queue c03039e0, I/O limit 4095Mb (mask 0xffffffff)
>hdc: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
>hdd: GoldStar CD-RW CED-8080B, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: attached ide-disk driver.
>hda: host protected area => 1
>hda: 40020624 sectors (20491 MB) w/2048KiB Cache, CHS=2491/255/63, UDMA(100)
>Partition check:
> hda: hda1 hda2 < hda5 hda6 >
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>NET4: Linux TCP/IP 1.0 for NET4.0
>IP Protocols: ICMP, UDP, TCP, IGMP
>IP: routing cache hash table of 4096 buckets, 32Kbytes
>TCP: Hash tables configured (established 32768 bind 65536)
>Linux IP multicast router 0.06 plus PIM-SM
>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>RAMDISK: Compressed image found at block 0
>Freeing initrd memory: 314k freed
>VFS: Mounted root (romfs filesystem) readonly.
>SCSI subsystem driver Revision: 1.00
>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
>Promise FastTrak SX4000 Linux Driver Version 1.01.0.12 (27.NOV.2002)
>FastTrak: Installed FastTrak SX4000 Local DIMM - 128MB
>scsi0 : FastTrak SX4000
>Journalled Block Device driver loaded
>kjournald starting. Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly.
>Trying to move old root to /initrd ... failed
>Unmounting old root
>Trying to free ramdisk memory ... okay
>Freeing unused kernel memory: 136k freed
>Executing init=/sbin/init
>Adding Swap: 248968k swap-space (priority -1)
>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
>Real Time Clock Driver v1.10f
>ide-scsi: ignoring drive hdc
>hdd: attached ide-scsi driver.
>scsi1 : SCSI host adapter emulation for IDE ATAPI devices
> Vendor: GoldStar Model: CD-RW CED-8080B Rev: 1.00
> Type: CD-ROM ANSI SCSI revision: 02
>ACPI: Power Button (FF) [PWRF]
>ACPI: Processor [CPU0] (supports C1)
>kjournald starting. Commit interval 5 seconds
>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>subfs: subfs-2.4 version 0.9.
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>parport0: irq 7 detected
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>inserting floppy driver for 2.4.26-std-up-alt6
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.12
>Intel 810 + AC97 Audio, version 0.24, 21:57:24 Aug 3 2004
>PCI: Setting latency timer of device 00:06.0 to 64
>i810: NVIDIA nForce Audio found at IO 0xe000 and 0xe800, MEM 0x0000 and 0x0000, IRQ 20
>i810_audio: Audio Controller supports 6 channels.
>i810_audio: Defaulting to base 2 channel mode.
>i810_audio: Resetting connection 0
>ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
>i810_audio: AC'97 codec 0, new EID value = 0x05c7
>i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
>usb.c: registered new driver usbdevfs
>usb.c: registered new driver hub
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>parport0: irq 7 detected
>lp0: using parport0 (polling).
>Looking for splash picture.... found (800x600, 11408 bytes, v2).
>Splash status on console 0 changed to on
>Looking for splash picture.... found (800x600, 11408 bytes, v2).
>Splash status on console 1 changed to on
>Looking for splash picture.... found (800x600, 11408 bytes, v2).
>Splash status on console 2 changed to on
>slmdm: version 2.7.10 Feb 4 2003 15:18:20 (Smart Link Ltd.).
>slmdm: country set is 0xb5 (USA).
>Looking for splash picture.... found (800x600, 11408 bytes, v2).
>Splash status on console 3 changed to on
>Smart Link AMRMO modem.
>Looking for splash picture.... found (800x600, 11408 bytes, v2).
>Splash status on console 4 changed to on
>Looking for splash picture.... found (800x600, 11408 bytes, v2).
>Splash status on console 5 changed to on
>Looking for splash picture.... found (800x600, 11408 bytes, v2).
>Splash status on console 6 changed to on
>Looking for splash picture.... found (800x600, 11408 bytes, v2).
>Splash status on console 7 changed to on
>Looking for splash picture.... found (800x600, 11408 bytes, v2).
>Splash status on console 8 changed to on
>Looking for splash picture.... found (800x600, 11408 bytes, v2).
>Splash status on console 9 changed to on
>Looking for splash picture.... found (800x600, 11408 bytes, v2).
>Splash status on console 10 changed to on
>Looking for splash picture.... found (800x600, 11408 bytes, v2).
>Splash status on console 11 changed to on
>Linux agpgart interface v0.99 (c) Jeff Hartmann
>agpgart: Maximum main memory to use for agp memory: 439M
>agpgart: Detected NVIDIA nForce2 chipset
>agpgart: AGP aperture is 64M @ 0xd8000000
>[drm] Initialized radeon 1.10.0 20020828 on minor 0: ATI Radeon QY RV100 7000/VE
>
>
>------------------------------------------------------------------------
>
>Module Size Used by Tainted: P
>udf 84512 0 (autoclean)
>isofs 26132 0 (autoclean)
>zlib_inflate 19748 0 (autoclean) [isofs]
>nls_koi8-r 3836 0 (autoclean)
>nls_cp437 4348 0 (autoclean)
>vfat 9644 0 (autoclean)
>fat 31032 0 (autoclean) [vfat]
>ide-cd 29408 0 (autoclean)
>radeon 113920 1
>agpgart 45604 3
>parport_pc 25608 1 (autoclean)
>lp 6496 0 (autoclean)
>parport 23040 1 (autoclean) [parport_pc lp]
>autofs4 8212 0 (autoclean)
>usbcore 58464 1
>i810_audio 22744 0
>ac97_codec 11880 0 [i810_audio]
>soundcore 3652 2 [i810_audio]
>sg 30588 0 (autoclean)
>sr_mod 15024 0 (autoclean)
>cdrom 27744 0 (autoclean) [ide-cd sr_mod]
>floppy 48568 0 (autoclean)
>subfs 4296 6 (autoclean)
>processor 8952 0
>button 2796 0
>ac 1792 0
>battery 5968 0
>ide-scsi 9264 0
>rtc 6236 0 (autoclean)
>ext3 62288 2
>jbd 37852 2 [ext3]
>FastTrak-sx4000 284672 0
>sd_mod 11836 0 (unused)
>scsi_mod 95064 5 [sg sr_mod ide-scsi FastTrak-sx4000 sd_mod]
>
>
>------------------------------------------------------------------------
>
>00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
>00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 0 (rev c1)
>00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
>00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
>00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
>00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
>00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
>00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
>00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
>00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
>00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
>00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
>01:06.0 RAID bus controller: Promise Technology, Inc. PDC20621 [SX4000] 4 Channel IDE RAID Controller (rev 01)
>02:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
>
>
>------------------------------------------------------------------------
>
>Promise FastTrak SX4000 Linux Driver Version 1.01.0.12 (27.NOV.2002)
>Adapter1 - FastTrak SX4000
>Array Drive -
> 1 : Maxtor IDE1/Master 78167MB IRQ(16) UDMA5 - (FREE)
> 5 : Maxtor IDE3/Master 78167MB IRQ(16) UDMA5 - (FREE)
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Community-en mailing list
>Community-en at altlinux.org
>https://lists.altlinux.org/mailman/listinfo/community-en
>
>
--
-----------------*-
Егор Гребнев
менеджер проектов
компания ALT Linux
(095) 2039698
http://www.altlinux.ru
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.altlinux.org/pipermail/community-en/attachments/20050310/6ca37bab/attachment-0003.html>
More information about the community-en
mailing list