[Comm-en] Xfree86 Hardware Acceleration
Jordan Patterson
jordanp at jyxent.com
Tue Sep 9 07:04:27 MSD 2003
Hi. I recently installed Alt Linux Junior and did a dist-upgrade to the Sisyphus
repository. The sound failed to work afterwords, but I got that fixed by reading
through the mailing list and finding the fix. When XFree86 updated however, 3d
acceration stopped working my 3d games(Gltron and tuxracer). I tried to boot up with
knoppix and add any useful changes to XFree86Config-4, but I have so far been
unable to fix anything. Does anybody know what could be wrong? My
XFree86Config-4 file is pasted below. Thanks to anyone that helps out.
Jordan
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "250 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/mouse"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "InputDevice"
Identifier "Mouse2"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe"
Load "glx"
Load "dri"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
Section "DRI"
Mode 0666
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Generic|Flat Panel 1400x1050"
VendorName "Generic"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR
MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5-90
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR
MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 59-75
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync
-vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 #60Hz
Modeline "800x600" 40.12 800 848 968 1056 600 601 605 628 #60Hz
Modeline "1024x768" 85 1024 1056 1152 1360 768 784 787 823
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -Hsync
-Vsync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -Hsync
-Vsync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +Hsync
+Vsync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -Hsync
-Vsync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "ATI Radeon"
Driver "radeon"
VendorName "All"
BoardName "All"
# VideoRam 32768
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
Option "sw_cursor"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "screen1"
Device "ATI Radeon"
Monitor "Generic|Flat Panel 1400x1050"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600"
"640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600"
"640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600"
"640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600"
"640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600"
"640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Mouse2" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
More information about the community-en
mailing list