[Desktop] Fwd: [Comm] Почему мои знакомые уходят с ALT ( было: Re: Блоги и ЛивЖурналы )
Anton Farygin
=?iso-8859-1?q?rider_=CE=C1_altlinux=2Ecom?=
Пн Июн 4 11:38:42 MSD 2007
Про эти проблемы уже давным давно всё рассказано в bugzilla.
Aleksey Novodvorsky wrote:
> ---------- Forwarded message ----------
> From: Gennadiy Redko <uit1 на zaz.zp.ua>
> Date: Jun 4, 2007 10:57 AM
> Subject: Re: [Comm] Почему мои знакомые уходят с ALT ( было: Re: Блоги
> и ЛивЖурналы )
> To: ALT Linux Community <community на lists.altlinux.org>
> Cc: Хихин Руслан <hihin на yandex.ru>
>
>
> Gennadiy Redko пишет:
> <skip>
>> Версию middle протестирую на "чистом" "Десктопе 4", когда поставлю
>> на домашнем компьютере.
> Во вложении - мой аппаратный конфиг и результат установки пакетов на
> бету Десктопа от 29 мая.
>
> Что совсем неприятно - на систему с этой видеокартой Десктоп совсем
> не становится :(
> Инсталлер почему-то пытается поднять X-server NV с глубиной цвета 32
> бита.
> В результате - черный экран.
> Куда багу слать, кто подскажет?
>> Legacy - наверное кто-то другой сможет, т. к. видеокарта на домашнем
>> компе легейси-драйвером не поддерживается.
>> Результаты - сюда слать?
>> Или заведете ветку на wiki или добавите пакеты в bugzilla?
>
> rpm -ihv nvidia_glx_common-1.0.9631-alt29.2.i586.rpm
> Preparing...
> ####################################################################################################
> nvidia_glx_common
> ####################################################################################################
> nvidia: set version to 1.0.9631 because read from
> /lib/modules/2.6.18-std-smp-alt6/.versions/nvidia failed.
> nvidia: failed to unlink /etc/X11/lib_nvidia/nvidia.xinf: No such file
> or directory
> [root на localhost Nvidia]# rpm -ihv nvidia_glx_1.0.9631-1.0.9631-alt29.2.i586.rpm
> Preparing...
> ####################################################################################################
> nvidia_glx_1.0.9631
> ####################################################################################################
> nvidia: set version to 1.0.9631 because read from
> /lib/modules/2.6.18-std-smp-alt6/.versions/nvidia failed.
> Warning! /lib/modules/2.6.18-std-smp-alt6/.versions/nvidia not found
> [root на localhost Nvidia]# rpm -ihv
> kernel-modules-nvidia_middle-std-smp-1.0.9631-alt2.132626.5.i586.rpm
> error: failed dependencies:
> kernel-image-std-smp = 2.6.18-alt5 is needed by
> kernel-modules-nvidia_middle-std-smp-1.0.9631-alt2.132626.5
> kernel-image-std-smp = 2.6.18-alt5 is needed by
> kernel-modules-nvidia_middle-std-smp-1.0.9631-alt2.132626.5
> [root на localhost Nvidia]# uname -a
> Linux localhost.localdomain 2.6.18-std-smp-alt6 #1 SMP Sun Apr 29
> 00:41:18 MSD 2007 i686 GNU/Linux
> [root на localhost Nvidia]#
> 00:00.0 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
> Subsystem: Elitegroup Computer Systems Unknown device 1899
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 8
> Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
> Capabilities: [80] AGP version 3.5
> Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW- AGP3+ Rate=x4,x8
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
> FW- Rate=<none>
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:00.1 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
> Subsystem: Elitegroup Computer Systems Unknown device 1899
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 00:00.2 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
> Subsystem: Elitegroup Computer Systems Unknown device 1899
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 00:00.3 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
> Subsystem: Elitegroup Computer Systems Unknown device 1899
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 00:00.4 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
> Subsystem: Elitegroup Computer Systems Unknown device 1899
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 00:00.7 Host bridge: VIA Technologies, Inc. CN400/PM880 Host Bridge
> Subsystem: Elitegroup Computer Systems Unknown device 1899
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if
> 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> Memory behind bridge: e0000000-e1ffffff
> Prefetchable memory behind bridge: d8000000-dfffffff
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
> Capabilities: [70] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video
> Capture (rev 11)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (4000ns min, 10000ns max)
> Interrupt: pin A routed to IRQ 201
> Region 0: Memory at e2000000 (32-bit, prefetchable) [size=4K]
> Capabilities: [44] Vital Product Data
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio
> Capture (rev 11)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (1000ns min, 63750ns max)
> Interrupt: pin A routed to IRQ 201
> Region 0: Memory at e2001000 (32-bit, prefetchable) [size=4K]
> Capabilities: [44] Vital Product Data
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID
> Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
> Subsystem: Elitegroup Computer Systems Unknown device 1899
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32
> Interrupt: pin B routed to IRQ 177
> Region 0: I/O ports at 9000 [size=8]
> Region 1: I/O ports at 9400 [size=4]
> Region 2: I/O ports at 9800 [size=8]
> Region 3: I/O ports at 9c00 [size=4]
> Region 4: I/O ports at a000 [size=16]
> Region 5: I/O ports at a400 [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:0f.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> (prog-if 8a [Master SecP PriP])
> Subsystem: Elitegroup Computer Systems Unknown device 1899
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32
> Interrupt: pin A routed to IRQ 177
> Region 4: I/O ports at a800 [size=16]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81) (prog-if 00 [UHCI])
> Subsystem: Elitegroup Computer Systems Unknown device 1899
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 169
> Region 4: I/O ports at ac00 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81) (prog-if 00 [UHCI])
> Subsystem: Elitegroup Computer Systems Unknown device 1899
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 169
> Region 4: I/O ports at b000 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81) (prog-if 00 [UHCI])
> Subsystem: Elitegroup Computer Systems Unknown device 1899
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 169
> Region 4: I/O ports at b400 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81) (prog-if 00 [UHCI])
> Subsystem: Elitegroup Computer Systems Unknown device 1899
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 169
> Region 4: I/O ports at b800 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
> (prog-if 20 [EHCI])
> Subsystem: Elitegroup Computer Systems Unknown device 1899
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32, Cache Line Size: 128 bytes
> Interrupt: pin C routed to IRQ 169
> Region 0: Memory at e2002000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
> [KT600/K8T800/K8T890 South]
> Subsystem: Elitegroup Computer Systems Unknown device 1899
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping+ SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:11.5 Multimedia audio controller: VIA Technologies, Inc.
> VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
> Subsystem: Elitegroup Computer Systems Unknown device 1899
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin C routed to IRQ 193
> Region 0: I/O ports at bc00 [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
> Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded
> Ethernet Controller on VT8235
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 185
> Region 0: I/O ports at c000 [size=256]
> Region 1: Memory at e2003000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4
> MX 440 AGP 8x] (rev a4) (prog-if 00 [VGA])
> Subsystem: CardExpert Technology Unknown device 0427
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>> TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (1250ns min, 250ns max)
> Interrupt: pin A routed to IRQ 10
> Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
> [virtual] Expansion ROM at e1000000 [disabled] [size=128K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [44] AGP version 3.0
> Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64-
> HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
> FW- Rate=<none>
>
>
> _______________________________________________
> Community mailing list
> Community на lists.altlinux.org
> https://lists.altlinux.org/mailman/listinfo/community
> _______________________________________________
> Desktop mailing list
> Desktop на lists.altlinux.org
> https://lists.altlinux.org/mailman/listinfo/desktop
Подробная информация о списке рассылки Desktop