[Sysadmins] NAT + Cisco CP-6921 ( Skinny Client Control Protocol )
Viacheslav Dubrovskyi
dubrsl на gmail.com
Чт Фев 28 12:09:06 MSK 2013
28.02.2013 10:07, Viacheslav Dubrovskyi пишет:
> 28.02.2013 09:54, Павел Иванов пишет:
>>
>>
>> четверг, 28 февраля 2013 г. пользователь Павел Иванов писал:
>>
>> *ip a*
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
>> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>> inet 127.0.0.1/8 <http://127.0.0.1/8> scope host lo
>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>> pfifo_fast state UP qlen 1000
>> link/ether 00:17:31:d3:7a:40 brd ff:ff:ff:ff:ff:ff
>> inet 172.27.149.252/24 <http://172.27.149.252/24> brd
>> 172.27.149.255 scope global eth0
>> 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
>> pfifo_fast state UP qlen 1000
>> link/ether 1c:7e:e5:cc:d6:d3 brd ff:ff:ff:ff:ff:ff
>> inet 192.168.1.170/24 <http://192.168.1.170/24> brd
>> 192.168.1.255 scope global eth1
>> 4: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc
>> pfifo_fast state DOWN qlen 1000
>> link/ether 34:08:04:29:d1:91 brd ff:ff:ff:ff:ff:ff
>>
>> *iptables -L -n -v*
>> Chain INPUT (policy ACCEPT 136 packets, 14443 bytes)
>> pkts bytes target prot opt in out source
>> destination
>>
>> Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
>> pkts bytes target prot opt in out source
>> destination
>> 0 0 ACCEPT all -- * * 0.0.0.0/0
>> <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0> state
>> RELATED,ESTABLISHED
>> 0 0 ACCEPT all -- * * 0.0.0.0/0
>> <http://0.0.0.0/0> 172.27.149.5
>> 22 1128 ACCEPT all -- * * 192.168.1.130 0.0.0.0/0
>> <http://0.0.0.0/0>
>> 2 120 ACCEPT all -- * * 0.0.0.0/0
>> <http://0.0.0.0/0> 192.168.1.130
>>
>> *iptables -t nat -L -n -v*
>> Chain INPUT (policy ACCEPT 136 packets, 14443 bytes)
>> pkts bytes target prot opt in out source
>> destination
>>
>> Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
>> pkts bytes target prot opt in out source
>> destination
>> 0 0 ACCEPT all -- * * 0.0.0.0/0
>> <http://0.0.0.0/0> 0.0.0.0/0 <http://0.0.0.0/0> state
>> RELATED,ESTABLISHED
>> 0 0 ACCEPT all -- * * 0.0.0.0/0
>> <http://0.0.0.0/0> 172.27.149.5
>> 22 1128 ACCEPT all -- * * 192.168.1.130 0.0.0.0/0
>> <http://0.0.0.0/0>
>> 2 120 ACCEPT all -- * * 0.0.0.0/0
>> <http://0.0.0.0/0> 192.168.1.130
>>
>> Chain OUTPUT (policy ACCEPT 57 packets, 6444 bytes)
>> pkts bytes target prot opt in out source
>> destination
>> [root на host-1 sysconfig]# iptables -t nat -L -n -v
>> Chain PREROUTING (policy ACCEPT 43 packets, 5776 bytes)
>> pkts bytes target prot opt in out source
>> destination
>> 1 60 DNAT all -- * * 0.0.0.0/0
>> <http://0.0.0.0/0> 172.27.149.5 to:192.168.1.130
>>
>> Chain POSTROUTING (policy ACCEPT 17 packets, 892 bytes)
>> pkts bytes target prot opt in out source
>> destination
>> 6 360 SNAT all -- * * 192.168.1.130
>> !192.168.1.0/24 <http://192.168.1.0/24> to:172.27.149.5
>>
>> Chain OUTPUT (policy ACCEPT 16 packets, 832 bytes)
>> pkts bytes target prot opt in out source
>> destination
>>
>
> Вы даже скопипастить не можете правильно :(. В таблице nat нет цепочки
> INPUT, FORWARD и т.д.
> И куда потеряли PREROUTING ?
Сорри, недосмотрел внимательно. Нашел :)
Жирный шрифт сбил.
--
WBR,
Viacheslav Dubrovskyi
----------- следующая часть -----------
Вложение в формате HTML было удалено...
URL: <http://lists.altlinux.org/pipermail/sysadmins/attachments/20130228/676b7676/attachment-0001.html>
Подробная информация о списке рассылки Sysadmins