[Sysadmins] Несколько сетевых плат

[Kharitonov A. Dmitriy]

>> Поделитесь опытом, как настроить два сетевых адаптера realtek?
> Какой из сетевых адаптеров realtek вы хотите настроить?
Две сетевухи Realtek 8029AS
Как не кручу - в ifconfige видны обе, прерывания и базовый адрес
разные, ip прописываются как надо, одна карточка работает хорошо,
другая не работает.

[user на server ~]$ [user на server ~]$ sudo ifconfig -a
Password:
lan       Link encap:Ethernet  HWaddr 00:00:01:01:37:BC
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:12 Base address:0xe800

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:18 errors:0 dropped:0 overruns:0 frame:0
          TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1404 (1.3 KiB)  TX bytes:1404 (1.3 KiB)

venet0    Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
-bash: [user на server: command not found
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

wan       Link encap:Ethernet  HWaddr 00:E0:7D:99:A8:B3
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:140 errors:0 dropped:0 overruns:0 frame:0
          TX packets:133 errors:0 dropped:0 overruns:0 carrier:0
[user на server ~]$ sudo ethtool -i lan
driver: ne2k-pci
version: 1.03
firmware-version:
bus-info: 0000:00:0a.0
[user на server ~]$ sudo ethtool -i wan
driver: ne2k-pci
version: 1.03
firmware-version:
bus-info: 0000:00:09.0
[user на server ~]$ cat /etc/iftab
wan     businfo 0000:00:09.0
lan     businfo 0000:00:0a.0
[user на server ~]$ cat /etc/net/iftab
wan     businfo 0000:00:09.0
lan     businfo 0000:00:0a.0
[user на server ~]$ sudo service network restart
Computing interface groups: ..ERROR: /etc/init.d/network: unknown interface group for iface 'venet0' of type 'venet'
. 3 interfaces found
Processing /etc/net/vlantab: empty.
Stopping group 1/realphys (2 interfaces)
        Stopping eth1: OK
        Stopping wan: ...OK
Stopping group 0/virtual (1 interfaces)
        Stopping lo: .OK
error: "net.ipv4.ip.dynaddr" is an unknown key
error: "net.ipv4.conf.eth0.send_redirects" is an unknown key
Computing interface groups: ..ERROR: /etc/init.d/network: unknown interface group for iface 'venet0' of type 'venet'
. 3 interfaces found
Starting group 0/virtual (1 interfaces)
        Starting lo: .....OK
Starting group 1/realphys (2 interfaces)
        Starting eth1: SIOCGIFFLAGS: No such device
!FAILED
        Starting wan: ........OK
Processing /etc/net/vlantab: empty.