[sisyphus] Сломался dhcp в GNOME3 / NetworkManager

[Igor Zubkov]

Hi,

Вот это обновление привело к отваливанию WiFi через NetworkManager в GNOME3:
$ rpm -q --lastchange dhcpcd
* Пт сен 20 2013 Mikhail Efremov <sem на altlinux.org> 1:6.1.0-alt1
- Disable 'persistent' option by default.
- Don't package 70-vendor-encap hook.
- Updated to 6.1.0.
$

Выгладит это всё примерно так:
1. Загружаем машину, входим в гном и сеть не поднимается вот так:
$ ip ad sh
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DOWN qlen 1000
    link/ether 60:eb:69:99:8d:82 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether 00:26:c7:82:51:5e brd ff:ff:ff:ff:ff:ff
    inet6 fe80::226:c7ff:fe82:515e/64 scope link
       valid_lft forever preferred_lft forever
$

Здесь должна быть двух часовая пауза во время которой я пытался понять
и починить. Единственно что я не делал, это откатить пакет dhcpcd т.к.
официальный архив с Сизифом помер.

2. Интересно. Я запускаю руками от рута dhcpcd:
# dhcpcd
dhcpcd[4828]: version 6.1.0 starting
dhcpcd[4940]: wlan0: starting wpa_supplicant
dhcpcd[4943]: wlan0: failed to start wpa_supplicant
dhcpcd[4944]: wlan0: Successfully initialized wpa_supplicant
Line 1049: unknown EAP method 'FAST'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 1049: failed to parse eap 'FAST'.
Line 1055: failed to parse network block.
Line 1060: unknown EAP method 'FAST'
You may need to add support for this EAP method during wpa_supplicant
build time configuration.
See README for more information.
Line 1060: failed to parse eap 'FAST'.
Line 1066: failed to parse network block.
Failed to read or parse configuration '/etc/wpa_supplicant.conf'.
dhcpcd[4828]: eth0: waiting for carrier
dhcpcd[4828]: wlan0: rebinding lease of 192.168.1.66
dhcpcd[4828]: wlan0: leased 192.168.1.66 for 86400 seconds
dhcpcd[4828]: wlan0: adding host route to 192.168.1.66 via 127.0.0.1
dhcpcd[4828]: wlan0: adding route to 192.168.1.0/24
dhcpcd[4828]: wlan0: adding default route via 192.168.1.1
dhcpcd[4828]: forked to background, child pid 5113
#

3. И всё заработало:
$ ip ad sh
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast
state DOWN qlen 1000
    link/ether 60:eb:69:99:8d:82 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether 00:26:c7:82:51:5e brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.66/24 brd 192.168.1.255 scope global wlan0
       valid_lft forever preferred_lft forever
    inet6 fe80::226:c7ff:fe82:515e/64 scope link
       valid_lft forever preferred_lft forever
$

И так приходится делать каждую загрузку.

-- 
Igor Zubkov
http://hi.im/ice