[sisyphus] kernel 2.6.39-pure-emerald-alt3 oops....

[Maks Re]

На Thu, 9 Jun 2011 15:41:35 +0400
Sergei Epiphanov <serpiph на nikiet.ru> писал:

> В сообщении от 9 июня 2011 14:58:05 автор Maks Re написал:
> > [11091.142094] usb 7-2: reset high speed USB device number 2 using
> > ehci_hcd [11091.256062] usb 7-2: device descriptor read/64, error
> > -71 [11091.471055] usb 7-2: device descriptor read/64, error -71
> 
> Несколько лет назад я сталкивался с такой ошибкой, вылечил заменой
> устройства на другое (от другой фирмы). Банально несоответствие
> железок.
> 
> > [11093.155345] BUG: unable to handle kernel paging request at
> > 35408000 [11093.155389] IP: [<c02e892c>]
> > __percpu_counter_add+0x2c/0xe0 [11093.155426] *pde = 00000000 
> > [11093.155448] Oops: 0000 [#1] PREEMPT SMP 
> 
> А это в явной форме ошибка в ядре.
> 

а вот поведение на ядре 2.6.38-std-def-alt7.2

Т.О. я полагаю что контролер это...
и к тому же для переносных винчестеров не стоит видимо использовать xfs



[ 2274.963643] wlan0: associated
[ 2447.708051] usb 7-2: new high speed USB device using ehci_hcd and address 7
[ 2447.842032] usb 7-2: New USB device found, idVendor=152d, idProduct=2338
[ 2447.842036] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 2447.842040] usb 7-2: Product: USB to ATA/ATAPI Bridge
[ 2447.842042] usb 7-2: Manufacturer: JMicron
[ 2447.842044] usb 7-2: SerialNumber: 2222562412BC
[ 2447.843277] scsi6 : usb-storage 7-2:1.0
[ 2448.841074] scsi 6:0:0:0: Direct-Access     ST932042 3AS              SDM1 PQ: 0 ANSI: 2 CCS
[ 2448.841396] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2448.842298] sd 6:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2448.843559] sd 6:0:0:0: [sdb] Write Protect is off
[ 2448.843563] sd 6:0:0:0: [sdb] Mode Sense: 00 38 00 00
[ 2448.843566] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2448.845051] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2448.898994]  sdb: sdb1 sdb2 sdb3
[ 2448.902308] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 2448.902311] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 2468.813605] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 2468.814119] SGI XFS Quota Management subsystem
[ 2469.067569] XFS mounting filesystem sdb3
[ 2469.599463] Ending clean XFS mount for filesystem: sdb3
[ 4259.987676] fuse init (API version 7.16)
[ 4259.993565] EXT2-fs (sdb2): warning: mounting unchecked fs, running e2fsck is recommended
[ 5420.112077] usb 7-2: reset high speed USB device using ehci_hcd and address 7
[ 5420.236073] usb 7-2: device descriptor read/64, error -71
[ 5420.464083] usb 7-2: device descriptor read/64, error -71
[ 5420.680100] usb 7-2: reset high speed USB device using ehci_hcd and address 7
[ 5420.804072] usb 7-2: device descriptor read/64, error -71
[ 5421.032053] usb 7-2: device descriptor read/64, error -71
[ 5421.248050] usb 7-2: reset high speed USB device using ehci_hcd and address 7
[ 5421.664048] usb 7-2: device not accepting address 7, error -71
[ 5421.776101] usb 7-2: reset high speed USB device using ehci_hcd and address 7
[ 5422.192076] usb 7-2: device not accepting address 7, error -71
[ 5422.192132] usb 7-2: USB disconnect, address 7
[ 5422.192136] sd 6:0:0:0: Device offlined - not ready after error recovery
[ 5422.192146] sd 6:0:0:0: [sdb] Unhandled error code
[ 5422.192149] sd 6:0:0:0: [sdb]  Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK
[ 5422.192154] sd 6:0:0:0: [sdb] CDB: Write(10): 2a 00 04 3f cf b0 00 00 01 00
[ 5422.192163] end_request: I/O error, dev sdb, sector 71290800
[ 5422.192203] xfs_force_shutdown(sdb3,0x1) called from line 1111 of file fs/xfs/linux-2.6/xfs_buf.c.  Return address = 0xf99fb5e2
[ 5422.192213] Filesystem sdb3: I/O Error Detected.  Shutting down filesystem: sdb3
[ 5422.192215] Please umount the filesystem, and rectify the problem(s)
[ 5422.372028] Filesystem sdb3: xfs_log_force: error 5 returned.
[ 5422.449285] Filesystem sdb3: xfs_log_force: error 5 returned.
[ 5422.449299] Filesystem sdb3: xfs_log_force: error 5 returned.
[ 5422.449707] EXT2-fs (sdb2): previous I/O error to superblock detected
[ 5422.449709] 
[ 5422.498044] EXT2-fs (sdb2): previous I/O error to superblock detected
[ 5422.498047] 
[ 5422.498072] BUG: unable to handle kernel paging request at 34074000
[ 5422.498124] IP: [<c11e7564>] __percpu_counter_add+0x14/0xb0
[ 5422.498163] *pde = 00000000 
[ 5422.498190] Oops: 0000 [#1] SMP 
[ 5422.498216] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb7/speed
[ 5422.498257] Modules linked in: fuse ext2 xfs exportfs usb_storage uas usb_libusual cryptd aes_i586 aes_generic autofs4 af_packet rfcomm sco bnep l2cap dm_multipath scsi_dh dm_mod usbhid hid uinput btusb bluetooth sr_mod cdrom snd_hda_codec_analog joydev pata_acpi thinkpad_acpi snd_hda_intel arc4 snd_hda_codec snd_hwdep snd_pcm hwmon snd_timer pcmcia ecb iwl3945 iwlcore ata_generic mac80211 firewire_ohci yenta_socket ehci_hcd snd pcmcia_rsrc cfg80211 psmouse uhci_hcd e1000e usbcore pcmcia_core snd_page_alloc firewire_core rfkill serio_raw soundcore ata_piix nls_base crc_itu_t pcspkr i2c_i801 evdev nvram ac battery sg rtc_cmos rtc_core wmi rtc_lib thermal processor ext4 mbcache jbd2 crc16 sd_mod i915 crc_t10dif drm_kms_helper drm i2c_algo_bit ahci libahci libata button i2c_core scsi_mod intel_agp intel_gtt agpgart video
[ 5422.498952] 
[ 5422.498964] Pid: 10216, comm: umount Not tainted 2.6.38-std-def-alt7.2 #1 LENOVO 7659W8R/7659W8R
[ 5422.499031] EIP: 0060:[<c11e7564>] EFLAGS: 00010096 CPU: 1
[ 5422.499065] EIP is at __percpu_counter_add+0x14/0xb0
[ 5422.499099] EAX: 00000000 EBX: f41c29d0 ECX: 00000000 EDX: 00000001
[ 5422.499134] ESI: f5c9fda0 EDI: f3eb7258 EBP: f0413e74 ESP: f0413e5c
[ 5422.499174]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 5422.499204] Process umount (pid: 10216, ti=f0412000 task=f19f0fc0 task.ti=f0412000)
[ 5422.499245] Stack:
[ 5422.499264]  c135c87f f3eb7248 f5c9fda0 f19f0fc0 f5c9fda0 f3eb7258 f0413e88 c10cf873
[ 5422.499330]  00000010 f5c9fda0 f3eb7248 f0413ea0 c1132227 00000000 ef3d0e80 dc0ed400
[ 5422.499404]  00000000 f0413eac c11322f5 f1baec00 f0413ed0 f979c03e f1baec00 f97a08e9
[ 5422.499478] Call Trace:
[ 5422.499498]  [<c135c87f>] ? wait_for_common+0xef/0x130
[ 5422.499532]  [<c10cf873>] account_page_dirtied+0x63/0x90
[ 5422.499566]  [<c1132227>] __set_page_dirty+0x37/0xb0
[ 5422.499603]  [<c11322f5>] mark_buffer_dirty+0x55/0x80
[ 5422.499636]  [<f979c03e>] ext2_sync_super+0x6e/0xd0 [ext2]
[ 5422.499676]  [<f979c0f1>] ext2_sync_fs+0x51/0x60 [ext2]
[ 5422.499708]  [<c114c670>] ? dquot_quota_sync+0x0/0x2d0
[ 5422.499744]  [<c1130767>] __sync_filesystem+0x57/0x90
[ 5422.499775]  [<c11307e1>] sync_filesystem+0x21/0x50
[ 5422.499805]  [<c110e089>] generic_shutdown_super+0x29/0xd0
[ 5422.499840]  [<c10e0290>] ? pcpu_free_area+0x140/0x180
[ 5422.499872]  [<c110e155>] kill_block_super+0x25/0x70
[ 5422.499903]  [<c110e535>] deactivate_locked_super+0x35/0x60
[ 5422.499935]  [<c110f143>] deactivate_super+0x43/0x60
[ 5422.499965]  [<c11257eb>] mntput_no_expire+0x8b/0xd0
[ 5422.499995]  [<c11260a0>] sys_umount+0x60/0x330
[ 5422.500012]  [<c1055769>] ? sigprocmask+0x79/0x100
[ 5422.500012]  [<c105787c>] ? sys_rt_sigprocmask+0xdc/0x100
[ 5422.500012]  [<c135f499>] syscall_call+0x7/0xb
[ 5422.500012] Code: 10 04 36 4f c1 e8 4d 66 17 00 31 d2 89 d0 5b 5e 5d c3 90 8d 74 26 00 55 89 e5 83 ec 18 89 5d f4 89 c3 89 7d fc 89 75 f8 8b 40 14 <64> 8b 30 89 f7 c1 ff 1f 01 d6 8b 55 08 11 cf 89 d1 c1 f9 1f 39 
[ 5422.500012] EIP: [<c11e7564>] __percpu_counter_add+0x14/0xb0 SS:ESP 0068:f0413e5c
[ 5422.500012] CR2: 0000000034074000
[ 5422.513496] ---[ end trace 161b40d7437c9766 ]---
[ 5422.572077] usb 7-2: new high speed USB device using ehci_hcd and address 8
[ 5422.700117] usb 7-2: device descriptor read/64, error -71
[ 5422.928083] usb 7-2: device descriptor read/64, error -71
[ 5423.144056] usb 7-2: new high speed USB device using ehci_hcd and address 9
[ 5423.268054] usb 7-2: device descriptor read/64, error -71
[ 5423.496080] usb 7-2: device descriptor read/64, error -71
[ 5423.712079] usb 7-2: new high speed USB device using ehci_hcd and address 10
[ 5424.128100] usb 7-2: device not accepting address 10, error -71
[ 5424.240106] usb 7-2: new high speed USB device using ehci_hcd and address 11
[ 5424.656088] usb 7-2: device not accepting address 11, error -71
[ 5424.656111] hub 7-0:1.0: unable to enumerate USB device on port 2
[ 5424.980058] usb 3-2: new full speed USB device using uhci_hcd and address 6
[ 5425.100055] usb 3-2: device descriptor read/64, error -71
[ 5425.324060] usb 3-2: device descriptor read/64, error -71
[ 5425.540048] usb 3-2: new full speed USB device using uhci_hcd and address 7
[ 5425.660083] usb 3-2: device descriptor read/64, error -71
[ 5425.940083] usb 3-2: device descriptor read/64, error -71
[ 5426.156058] usb 3-2: new full speed USB device using uhci_hcd and address 8
[ 5426.566300] usb 3-2: device not accepting address 8, error -71
[ 5426.676073] usb 3-2: new full speed USB device using uhci_hcd and address 9
[ 5427.088048] usb 3-2: device not accepting address 9, error -71
[ 5427.088068] hub 3-0:1.0: unable to enumerate USB device on port 2