[sisyphus] Напомните про монтирование флэшек

[Alexei V. Mezin]

08.12.2010 11:58, Michael A. Kangin пишет:

> Странно. последняя пара версий должна бы работать с ntfs-3g.
> Можно посмотреть выхлоп из /var/log/messages и вывод hal-device?
>


Может у меня что-то сломано? Например, системная локаль ср1251.


Dec  8 23:21:23 threebears kernel: usb 1-6.2: new high speed USB device 
using ehci_hcd and address 31
Dec  8 23:21:23 threebears kernel: usb 1-6.2: New USB device found, 
idVendor=8564, idProduct=1000
Dec  8 23:21:23 threebears kernel: usb 1-6.2: New USB device strings: 
Mfr=1, Product=2, SerialNumber=3
Dec  8 23:21:23 threebears kernel: usb 1-6.2: Product: Mass Storage Device
Dec  8 23:21:23 threebears kernel: usb 1-6.2: Manufacturer: JetFlash
Dec  8 23:21:23 threebears kernel: usb 1-6.2: SerialNumber: EYODEL3J
Dec  8 23:21:23 threebears kernel: usb 1-6.2: configuration #1 chosen 
from 1 choice
Dec  8 23:21:23 threebears kernel: scsi10 : SCSI emulation for USB Mass 
Storage devices
Dec  8 23:21:28 threebears kernel: scsi 10:0:0:0: Direct-Access 
JetFlash Transcend 16GB   8.07 PQ: 0 ANSI: 2
Dec  8 23:21:28 threebears kernel: sd 10:0:0:0: Attached scsi generic 
sg9 type 0
Dec  8 23:21:28 threebears kernel: sd 10:0:0:0: [sdi] 31391744 512-byte 
logical blocks: (16.0 GB/14.9 GiB)
Dec  8 23:21:28 threebears kernel: sd 10:0:0:0: [sdi] Write Protect is off
Dec  8 23:21:28 threebears kernel: sd 10:0:0:0: [sdi] Assuming drive 
cache: write through
Dec  8 23:21:28 threebears kernel: sd 10:0:0:0: [sdi] Assuming drive 
cache: write through
Dec  8 23:21:28 threebears kernel:  sdi: sdi1
Dec  8 23:21:28 threebears kernel: sd 10:0:0:0: [sdi] Assuming drive 
cache: write through
Dec  8 23:21:28 threebears kernel: sd 10:0:0:0: [sdi] Attached SCSI 
removable disk


0: udi = '/org/freedesktop/Hal/devices/volume_uuid_6084FD0284FCDB8A'
   info.category = 'volume'  (string)
   info.interfaces = { 'org.freedesktop.Hal.Device.Volume' } (string list)
   linux.hotplug_type = 3  (0x3)  (int)
   block.storage_device = 
'/org/freedesktop/Hal/devices/storage_serial_JetFlash_Transcend_16GB_EYODEL3J_0_0' 
  (string)
   info.capabilities = { 'volume', 'block' } (string list)
   volume.fstype = 'ntfs'  (string)
   volume.fsusage = 'filesystem'  (string)
   volume.fsversion = ''  (string)
   volume.uuid = '6084FD0284FCDB8A'  (string)
   volume.label = 'Transcend'  (string)
   volume.mount_point = ''  (string)
   volume.is_mounted = false  (bool)
   volume.is_mounted_read_only = false  (bool)
   volume.linux.is_device_mapper = false  (bool)
   volume.is_disc = false  (bool)
   info.udi = 
'/org/freedesktop/Hal/devices/volume_uuid_6084FD0284FCDB8A'  (string)
   volume.is_partition = true  (bool)
   volume.partition.number = 1  (0x1)  (int)
   volume.num_blocks = 31391488  (0x1deff00)  (uint64)
   volume.size = 16072441856  (0x3bdfe0000)  (uint64)
   info.product = 'Transcend'  (string)
   block.device = '/dev/sdi1'  (string)
   block.minor = 129  (0x81)  (int)
   volume.block_size = 512  (0x200)  (int)
   block.is_volume = true  (bool)
   volume.policy.should_mount = false  (bool)
   volume.partition.start = 131072  (0x20000)  (uint64)
   block.major = 8  (0x8)  (int)
   volume.partition.media_size = 16072572928  (0x3be000000)  (uint64)
   volume.ignore = true  (bool)
   org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 
'Unmount', 'Eject' } (string list)
   org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 
'as' } (string list)
   org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point 
fstype extra_options', 'extra_options', 'extra_options' } (string list)
   org.freedesktop.Hal.Device.Volume.method_execpaths = { 
'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' } 
(string list)
   volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 
'nodiratime', 'relatime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 
'gid=', 'u
mask=', 'utf8' } (string list)
   volume.unmount.valid_options = { 'lazy' } (string list)
   volume.policy.mount_filesystem = 'ntfs'  (string)
   volume.policy.corwin = true  (bool)
   volume.policy.desired_mount_point = 'Transcend 16GB'  (string)
   linux.sysfs_path = 
'/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-6/1-6.2/1-6.2:1.0/host10/target10:0:0/10:0:0:0/block/sdi/sdi1' 
  (string)
   info.parent = 
'/org/freedesktop/Hal/devices/storage_serial_JetFlash_Transcend_16GB_EYODEL3J_0_0' 
  (string)

1: udi = 
'/org/freedesktop/Hal/devices/storage_serial_JetFlash_Transcend_16GB_EYODEL3J_0_0'
   info.category = 'storage'  (string)
   info.vendor = 'JetFlash'  (string)
   info.interfaces = { 'org.freedesktop.Hal.Device.Storage.Removable' } 
(string list)
   linux.hotplug_type = 3  (0x3)  (int)
   block.storage_device = 
'/org/freedesktop/Hal/devices/storage_serial_JetFlash_Transcend_16GB_EYODEL3J_0_0' 
  (string)
   storage.policy.should_mount = true  (bool)
   storage.policy.mount_options = 'nodev,nosuid,noexec,noatime'  (string)
   info.capabilities = { 'storage', 'block' } (string list)
   info.addons = { 'hald-addon-storage' } (string list)
   info.product = 'Transcend 16GB'  (string)
   info.udi = 
'/org/freedesktop/Hal/devices/storage_serial_JetFlash_Transcend_16GB_EYODEL3J_0_0' 
  (string)
   block.device = '/dev/sdi'  (string)
   block.major = 8  (0x8)  (int)
   block.minor = 128  (0x80)  (int)
   block.is_volume = false  (bool)
   storage.bus = 'usb'  (string)
   storage.no_partitions_hint = false  (bool)
   storage.media_check_enabled = true  (bool)
   storage.automount_enabled_hint = true  (bool)
   storage.drive_type = 'disk'  (string)
   storage.model = 'Transcend 16GB'  (string)
   storage.vendor = 'JetFlash'  (string)
   storage.serial = 'JetFlash_Transcend_16GB_EYODEL3J-0:0'  (string)
   storage.firmware_version = '8.07'  (string)
   storage.lun = 0  (0x0)  (int)
   storage.originating_device = 
'/org/freedesktop/Hal/devices/usb_device_8564_1000_EYODEL3J_if0'  (string)
   storage.removable.media_available = true  (bool)
   storage.removable = true  (bool)
   storage.size = 0  (0x0)  (uint64)
   storage.removable.support_async_notification = false  (bool)
   storage.hotpluggable = true  (bool)
   storage.requires_eject = false  (bool)
   storage.partitioning_scheme = 'mbr'  (string)
   storage.removable.media_size = 16072572928  (0x3be000000)  (uint64)
   linux.sysfs_path = 
'/sys/devices/pci0000:00/0000:00:0b.1/usb1/1-6/1-6.2/1-6.2:1.0/host10/target10:0:0/10:0:0:0/block/sdi' 
  (string)
   info.parent = 
'/org/freedesktop/Hal/devices/usb_device_8564_1000_EYODEL3J_if0_scsi_host_0_scsi_device_lun0' 
  (string)