[sisyphus] Clocksource tsc unstable
Alexey Sidorov
=?iso-8859-1?q?alex_=CE=C1_reutman=2Eru?=
Вт Дек 9 10:33:00 MSK 2008
Michail Yakushin пишет:
> Можно примерно описать железо? интересует процессор и мат. плата.
Celeron 1700, http://www.epox.ru/products/mb/ep-4gem800i/
> Можете попробовать обновиться до 2.6.27
Ок, сегодня поставлю. Результаты завтра :)
> И dmesg с начала? там может быть что то интересное, можно поискать по
> ключевому слову hpet
alex:www ~$ dmesg
[ 0.000000] Linux version 2.6.26-wks-smp-alt5 (builder на yalt64.vps) (gcc version 4.1.2
20070626 (ALT Linux, build 4.1.2-alt3)) #1 SMP PREEMPT Fri Oct 17 15:10:17 UTC 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
[ 0.000000] BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 767MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00f5a70] 000f5a70
[ 0.000000] Entering add_active_range(0, 0, 196592) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 196592
[ 0.000000] HighMem 196592 -> 196592
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 196592
[ 0.000000] On node 0 totalpages: 196592
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1504 pages used for memmap
[ 0.000000] Normal zone: 190992 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP 000F7610, 0014 (r0 IntelR)
[ 0.000000] ACPI: RSDT 2FFF3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 2FFF3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 2FFF30C0, 3E7C (r1 INTELR AWRDACPI 1000 MSFT 100000D)
[ 0.000000] ACPI: FACS 2FFF0000, 0040
[ 0.000000] ACPI: APIC 2FFF6F40, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PERCPU: Allocating 40452 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195056
[ 0.000000] Kernel command line: auto BOOT_IMAGE=2626-wks-smp-5 ro root=301
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] CPU 0 irqstacks, hard=c0409000 soft=c0401000
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1716.938 MHz processor.
[ 0.000999] Console: colour dummy device 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000999] Memory: 774608k/786368k available (1797k kernel code, 11296k reserved, 1006k data,
240k init, 0k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000999] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
[ 0.000999] .init : 0xc03c2000 - 0xc03fe000 ( 240 kB)
[ 0.000999] .data : 0xc02c1775 - 0xc03bd240 (1006 kB)
[ 0.000999] .text : 0xc0100000 - 0xc02c1775 (1797 kB)
[ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000999] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.000999] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.060995] Calibrating delay using timer specific routine.. 3436.63 BogoMIPS (lpj=1718316)
[ 0.061054] Security Framework initialized
[ 0.061076] Capability LSM initialized
[ 0.061105] Mount-cache hash table entries: 512
[ 0.061439] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.061469] CPU: L2 cache: 128K
[ 0.061482] CPU: Hyper-Threading is disabled
[ 0.061500] Intel machine check architecture supported.
[ 0.061525] Intel machine check reporting enabled on CPU#0.
[ 0.061543] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[ 0.061563] CPU0: Thermal monitoring enabled
[ 0.061594] Checking 'hlt' instruction... OK.
[ 0.065382] ACPI: Core revision 20080321
[ 0.078987] ENABLING IO-APIC IRQs
[ 0.078987] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088986] CPU0: Intel(R) Celeron(R) CPU 1.70GHz stepping 03
[ 0.088986] Brought up 1 CPUs
[ 0.088986] Total of 1 processors activated (3436.63 BogoMIPS).
[ 0.088986] CPU0 attaching sched-domain:
[ 0.088986] domain 0: span 0
[ 0.088986] groups: 0
[ 0.088986] net_namespace: 500 bytes
[ 0.089445] NET: Registered protocol family 16
[ 0.090250] ACPI: bus type pci registered
[ 0.116004] PCI: PCI BIOS revision 2.10 entry at 0xfb310, last bus=2
[ 0.116033] PCI: Using configuration type 1 for base access
[ 0.116058] Setting up standard PCI resources
[ 0.136197] ACPI: EC: Look up EC in DSDT
[ 0.146207] ACPI: Interpreter enabled
[ 0.146232] ACPI: (supports S0 S1 S4 S5)
[ 0.146281] ACPI: Using IOAPIC for interrupt routing
[ 0.161551] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.162347] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.162351] * this clock source is slow. If you are sure your timer does not have
[ 0.162354] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.162476] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[ 0.162503] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
[ 0.163268] PCI: Transparent bridge - 0000:00:1e.0
[ 0.163337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.163829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.201339] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.201624] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.201899] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.202234] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.202512] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.202793] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.203108] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.203388] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.203995] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.204161] pnp: PnP ACPI init
[ 0.204196] ACPI: bus type pnp registered
[ 0.214893] pnp: PnP ACPI: found 16 devices
[ 0.214919] ACPI: ACPI bus type pnp unregistered
[ 0.214939] PnPBIOS: Disabled by ACPI PNP
[ 0.216225] PCI: Using ACPI for IRQ routing
[ 0.229031] system 00:03: ioport range 0x400-0x4bf could not be reserved
[ 0.229072] system 00:04: ioport range 0xb78-0xb7b has been reserved
[ 0.229095] system 00:04: ioport range 0xf78-0xf7b has been reserved
[ 0.229117] system 00:04: ioport range 0xa78-0xa7b has been reserved
[ 0.229137] system 00:04: ioport range 0xe78-0xe7b has been reserved
[ 0.229158] system 00:04: ioport range 0xbbc-0xbbf has been reserved
[ 0.229178] system 00:04: ioport range 0xfbc-0xfbf has been reserved
[ 0.229198] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.229228] system 00:04: ioport range 0x294-0x297 has been reserved
[ 0.229248] system 00:04: ioport range 0x4e0-0x4e7 has been reserved
[ 0.261090] PCI: Bridge: 0000:00:01.0
[ 0.261111] IO window: disabled.
[ 0.261129] MEM window: 0xe6000000-0xe7ffffff
[ 0.261148] PREFETCH window: 0x00000000e4000000-0x00000000e5ffffff
[ 0.261177] PCI: Bridge: 0000:00:1e.0
[ 0.261192] IO window: c000-cfff
[ 0.261209] MEM window: 0xe8000000-0xe9ffffff
[ 0.261227] PREFETCH window: 0x0000000040000000-0x00000000400fffff
[ 0.261270] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.261298] NET: Registered protocol family 2
[ 0.279076] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.279730] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.281462] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.282366] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.282407] TCP reno registered
[ 0.288137] NET: Registered protocol family 1
[ 0.288383] checking if image is initramfs... it is
[ 0.376492] Freeing initrd memory: 582k freed
[ 0.378463] audit: initializing netlink socket (disabled)
[ 0.378510] type=2000 audit(1228732552.377:1): initialized
[ 0.381655] Total HugeTLB memory allocated, 0
[ 0.388603] VFS: Disk quotas dquot_6.5.1
[ 0.388917] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.389457] msgmni has been set to 1514
[ 0.390224] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.390259] io scheduler noop registered
[ 0.390272] io scheduler anticipatory registered
[ 0.390288] io scheduler deadline registered
[ 0.390341] io scheduler cfq registered (default)
[ 0.390491] pci 0000:01:00.0: Boot video device
[ 0.392173] vesafb: framebuffer at 0xe4000000, mapped to 0xf0880000, using 4096k, total 4096k
[ 0.392208] vesafb: mode is 1280x1024x16, linelength=2560, pages=0
[ 0.392229] vesafb: protected mode interface info at c000:02e5
[ 0.392250] vesafb: pmi: set display start = c00c031e, set palette = c00c0394
[ 0.392272] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1
3d2 3d3 3d4 3d5 3da
[ 0.392345] vesafb: scrolling: redraw
[ 0.392360] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.466457] Console: switching to colour frame buffer device 160x64
[ 0.535109] fb0: VESA VGA frame buffer device
[ 0.535786] isapnp: Scanning for PnP cards...
[ 0.761866] Switched to high resolution mode on CPU 0
[ 0.849618] isapnp: No Plug & Play device found
[ 0.860711] Real Time Clock Driver v1.12ac
[ 0.861486] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.862606] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.863442] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.865191] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.866273] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.873056] brd: module loaded
[ 0.873564] input: Macintosh mouse button emulation as /class/input/input0
[ 0.874651] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.877865] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.878331] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.884579] mice: PS/2 mouse device common for all mice
[ 0.885004] cpuidle: using governor ladder
[ 0.885387] cpuidle: using governor menu
[ 0.887482] TCP bic registered
[ 0.887759] Using IPI No-Shortcut mode
[ 0.888320] registered taskstats version 1
[ 0.889384] Freeing unused kernel memory: 240k freed
[ 0.889888] Write protecting the kernel text: 1800k
[ 0.890337] Write protecting the kernel read-only data: 832k
[ 0.910506] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.138253] Uniform Multi-Platform E-IDE driver
[ 1.138658] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.145622] ICH4: IDE controller (0x8086:0x24cb rev 0x02) at PCI slot 0000:00:1f.1
[ 1.146328] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 1.146991] ICH4: not 100% native mode: will probe irqs later
[ 1.147508] ide0: BM-DMA at 0xf000-0xf007
[ 1.169451] ide1: BM-DMA at 0xf008-0xf00f
[ 1.189999] Probing IDE interface ide0...
[ 1.453187] hda: Maxtor 6Y060L0, ATA DISK drive
[ 2.086077] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.086218] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
[ 2.107516] hda: UDMA/33 mode selected
[ 2.128447] Probing IDE interface ide1...
[ 2.800187] hdc: MATSHITA CR-594, ATAPI CD/DVD-ROM drive
[ 3.127992] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.128318] hdc: UDMA/33 mode selected
[ 3.149759] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.187033] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.217711] hda: max request size: 128KiB
[ 3.242017] hda: 120103200 sectors (61492 MB) w/2048KiB Cache, CHS=65535/16/63
[ 3.272436] hda: cache flushes supported
[ 3.294017] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA
IDE ports
[ 3.316200] hda:<3>ide_generic: I/O resource 0x1F0-0x1F7 not free.
[ 3.338643] hda1 hda2 hda3
[ 3.361006] ide_generic: I/O resource 0x170-0x177 not free.
[ 3.418517] SCSI subsystem initialized
[ 3.450573] Driver 'sd' needs updating - please use bus_type methods
[ 3.485660] No dock devices found.
[ 3.542813] libata version 3.00 loaded.
[ 4.161503] kjournald starting. Commit interval 5 seconds
[ 4.182414] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.479926] 8139too Fast Ethernet driver 0.9.28
[ 6.480004] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 6.480899] eth0: RealTek RTL8139 at 0xf0854000, 00:80:48:18:1e:31, IRQ 17
[ 6.480907] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 6.480961] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 6.481867] eth1: RealTek RTL8139 at 0xf0856000, 00:50:22:b4:db:19, IRQ 18
[ 6.481874] eth1: Identified 8139 chip type 'RTL-8139C'
[ 6.481922] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 6.482834] eth2: RealTek RTL8139 at 0xf0858000, 00:50:22:b4:da:84, IRQ 19
[ 6.482841] eth2: Identified 8139 chip type 'RTL-8139C'
[ 8.752224] Linux agpgart interface v0.103
[ 8.772439] ACPI: ACPI0007:00 is registered as cooling_device0
[ 8.783831] input: Power Button (FF) as /class/input/input2
[ 8.805510] agpgart: Detected an Intel 830M Chipset.
[ 8.807150] ACPI: Power Button (FF) [PWRF]
[ 8.807369] input: Power Button (CM) as /class/input/input3
[ 8.809950] agpgart: AGP aperture is 64M @ 0xe0000000
[ 8.830163] ACPI: Power Button (CM) [PWRB]
[ 8.832150] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 8.832711] ACPI: Thermal Zone [THRM] (37 C)
[ 8.920378] ACPI: PNP0C0B:00 is registered as cooling_device1
[ 8.920396] ACPI: Fan [FAN] (on)
[ 8.994355] usbcore: registered new interface driver usbfs
[ 8.994427] usbcore: registered new interface driver hub
[ 8.999128] usbcore: registered new device driver usb
[ 9.010267] USB Universal Host Controller Interface driver v3.0
[ 9.010368] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 9.010390] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 9.010397] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 9.010738] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 9.010791] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
[ 9.010989] usb usb1: configuration #1 chosen from 1 choice
[ 9.011108] hub 1-0:1.0: USB hub found
[ 9.011132] hub 1-0:1.0: 2 ports detected
[ 9.112363] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.112372] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.112378] usb usb1: Product: UHCI Host Controller
[ 9.112383] usb usb1: Manufacturer: Linux 2.6.26-wks-smp-alt5 uhci_hcd
[ 9.112388] usb usb1: SerialNumber: 0000:00:1d.0
[ 9.112495] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
[ 9.112529] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 9.112536] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 9.112616] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 9.116560] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 9.116589] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xea000000
[ 9.126065] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 9.126260] usb usb2: configuration #1 chosen from 1 choice
[ 9.126331] hub 2-0:1.0: USB hub found
[ 9.126353] hub 2-0:1.0: 6 ports detected
[ 9.140352] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 9.140364] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 9.220619] input: PC Speaker as /class/input/input4
[ 9.227333] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.227341] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.227347] usb usb2: Product: EHCI Host Controller
[ 9.227351] usb usb2: Manufacturer: Linux 2.6.26-wks-smp-alt5 ehci_hcd
[ 9.227356] usb usb2: SerialNumber: 0000:00:1d.7
[ 9.227418] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 9.227439] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 9.227447] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 9.227518] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 9.227565] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[ 9.227778] usb usb3: configuration #1 chosen from 1 choice
[ 9.227869] hub 3-0:1.0: USB hub found
[ 9.227895] hub 3-0:1.0: 2 ports detected
[ 9.229805] hdc: ATAPI 48X CD-ROM drive, 128kB Cache
[ 9.229819] Uniform CD-ROM driver Revision: 3.20
[ 9.328314] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.328322] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.328328] usb usb3: Product: UHCI Host Controller
[ 9.328332] usb usb3: Manufacturer: Linux 2.6.26-wks-smp-alt5 uhci_hcd
[ 9.328337] usb usb3: SerialNumber: 0000:00:1d.1
[ 9.329517] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 9.329689] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 9.336008] eth3: VIA Rhine III at 0xe9003000, 00:04:61:50:5d:cf, IRQ 22.
[ 9.336487] eth3: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 9.338169] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 9.338193] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 9.338201] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 9.338289] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 9.338337] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[ 9.338534] usb usb4: configuration #1 chosen from 1 choice
[ 9.338624] hub 4-0:1.0: USB hub found
[ 9.338649] hub 4-0:1.0: 2 ports detected
[ 9.439319] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.439327] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.439333] usb usb4: Product: UHCI Host Controller
[ 9.439337] usb usb4: Manufacturer: Linux 2.6.26-wks-smp-alt5 uhci_hcd
[ 9.439342] usb usb4: SerialNumber: 0000:00:1d.2
[ 10.105715] input: ImPS/2 Generic Wheel Mouse as /class/input/input5
[ 10.452829] Adding 1052248k swap on /dev/hda2. Priority:-1 extents:1 across:1052248k
[ 10.491541] Adding 1044216k swap on /dev/hda3. Priority:-2 extents:1 across:1044216k
[ 10.859636] EXT3 FS on hda1, internal journal
[ 15.312052] device-mapper: uevent: version 1.0.3
[ 15.315835] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel на redhat.com
[ 26.408936] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 26.475740] nf_conntrack version 0.5.0 (12288 buckets, 49152 max)
[ 30.409395] dima: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 30.958057] reutman: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 31.514975] rosnet: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 34.203523] RPC: Registered udp transport module.
[ 34.203532] RPC: Registered tcp transport module.
[ 35.621697] w83627hf: Found W83627HF chip at 0x290
[ 48.677364] Installing knfsd (copyright (C) 1996 okir на monad.swb.de).
[ 48.763413] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 48.881441] NFSD: starting 90-second grace period
[ 50.020764] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[ 239.102643] loop: module loaded
[39372.516140] Clocksource tsc unstable (delta = 4686732243 ns)
--
Alexey Sidorov
mailto:alex на reutman.ru
JID: alex на reutman.ru
ICQ: 5052225
Подробная информация о списке рассылки Sisyphus