[sisyphus] Не могу запустить сеть прошу помочь.

[engsi]

> А то же самое с ethtool ?
провод подключен к eth1
лампочки на сетевой карте и свиче показывают 1000 мегабит/с
[root на p01 ~]# /usr/sbin/ethtool eth0
Settings for eth0:
        Supported ports: [ MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised auto-negotiation: Yes
        Speed: Unknown! (65535)
        Duplex: Unknown! (255)
        Port: MII
        PHYAD: 1
        Transceiver: external
        Auto-negotiation: on
        Supports Wake-on: g
        Wake-on: d
        Link detected: no
[root на p01 ~]# /usr/sbin/ethtool eth1
Settings for eth1:
        Supported ports: [ MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 1000Mb/s
        Duplex: Full
        Port: MII
        PHYAD: 1
        Transceiver: external
        Auto-negotiation: on
        Supports Wake-on: g
        Wake-on: d
        Link detected: yes
[root на p01 ~]# /usr/sbin/ethtool eth2
Settings for eth2:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 100Mb/s
        Duplex: Half
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: pumbg
        Wake-on: g
        Current message level: 0x00000033 (51)
        Link detected: no


запустил
[root на p01 default]# /usr/sbin/ethtool -s eth1 duplex full speed 100 autoneg off
теперь индикатор на сетевой карточке и свиче, показывают 100мб/с.
на всякий случай проверим.
[root на p01 default]# ping 192.168.178.1
connect: Network is unreachable


теперь скорость стала не известной, а лампочки на сетевой карте и свиче
показывает 100 мегабит/с



[root на p01 default]# /usr/sbin/ethtool eth1
Settings for eth1:
        Supported ports: [ MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  Not reported
        Advertised auto-negotiation: No
        Speed: Unknown! (65535)
        Duplex: Unknown! (255)
        Port: MII
        PHYAD: 1
        Transceiver: external
        Auto-negotiation: off
        Supports Wake-on: g
        Wake-on: d
        Link detected: no
-- 
С уважением,
 engsi                          mailto:engsi на web.de