[sisyphus] KDE-зависание через некоторое время после запуска хранителя экрана
Yuri Anikin
=?iso-8859-1?q?Y=2EAnikin_=CE=C1_mec=2Etgl=2Eru?=
Чт Сен 18 11:11:04 MSD 2003
Здравствуйте!
После обновления до ядра 2.4.22-std-up-alt2 имею зависание, которое прерывается только по Alt-SysRq-B...
#cat /boot/grub/menu.lst
...
kernel (hd0,0)/boot/vmlinuz-2.4.22-std-up-alt2 ide0=ata66 acpi=off root=/dev/hda1
#dmesg
Linux version 2.4.22-std-up-alt2 (builder на mash.office.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux, build 2.96-alt3)) #1 Tue Sep 9 16:10:40 MSD 2003
...
ACPI: have wakeup address 0xc0001000
found SMP MP-table at 000fb9e0
hm, page 000fb000 reserved twice.
hm, page 000fc000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Это еще почему?
...
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: GIGABYTE Product ID: 7VRX APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 2 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Kernel command line: ide0=ata66 acpi=off root=/dev/hda1
ide_setup: ide0=ata66
Initializing CPU#0
Detected 1400.090 MHz processor.
Console: colour VGA+ 80x25
...
ACPI: Subsystem revision 20030813
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3147] at 00:11.0
PCI->APIC IRQ transform: (B0,I13,P0) -> 17
PCI->APIC IRQ transform: (B0,I17,P0) -> 16
PCI->APIC IRQ transform: (B0,I17,P3) -> 21
PCI->APIC IRQ transform: (B0,I17,P3) -> 21
PCI->APIC IRQ transform: (B0,I17,P2) -> 22
PCI->APIC IRQ transform: (B0,I20,P0) -> 16
PCI->APIC IRQ transform: (B0,I20,P1) -> 17
PCI->APIC IRQ transform: (B0,I20,P2) -> 18
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI: Via IRQ fixup for 00:11.2, from 10 to 5
PCI: Via IRQ fixup for 00:11.3, from 10 to 5
PCI: Via IRQ fixup for 00:14.0, from 11 to 0
PCI: Via IRQ fixup for 00:14.1, from 10 to 1
...
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: IC35L060AVER07-0, ATA DISK drive
blk: queue c02edb80, I/O limit 4095Mb (mask 0xffffffff)
hdc: _NEC CD-RW NR-9300A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 120103200 sectors (61493 MB) w/1916KiB Cache, CHS=7476/255/63, UDMA(100)
...
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
От этого как избавиться?
...
[drm] AGP 0.99 aperture @ 0xe0000000 128MB
[drm] Initialized r128 2.3.0 20021029 on minor 0
#cat /etc/X11/XF86Config-4
...
Section "Module"
# This loads the DBE extension module.
Load "dbe"
Load "glx"
Load "dri"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Monitor"
Identifier "Samsung|Samsung SyncMaster 700IFT (CSH780B*)"
VendorName "Samsung"
ModelName "SyncMaster 7001FT"
HorizSync 30-96
VertRefresh 50-160
Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "ATI Rage 128"
VendorName "Unknown"
BoardName "Unknown"
Driver "r128"
VideoRam 32768
# Clock lines
Option "UseCCEFor2D" "false"
Option "DPMS" "on"
Option "AGPMode" "4"
EndSection
Section "Screen"
Identifier "screen1"
Device "ATI Rage 128"
Monitor "Samsung|Samsung SyncMaster 700IFT (CSH780B*)"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1024x768" "800x600" "640x400"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
#less /var/log/XFree86.0.log
XFree86 Version 4.3.0 (ALT Linux build: 4.3.0-alt1)
Release Date: 27 February 2003
...
Module Loader present
OS Kernel: Linux version 2.4.22-std-up-alt2 (builder на mash.office.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux, build 2.96-alt3)) #1 (==) Log file: "/var/log/XFree86.0.log", Time: Thu Sep 18 10:47:13 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) | |-->Monitor "Samsung|Samsung SyncMaster 700IFT (CSH780B*)"
(**) | |-->Device "ATI Rage 128"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
...
(**) FontPath set to "unix/:-1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
...
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS rev 0, Mem @ 0xd8000000/26, 0xdfefc000/14, I/O @ 0xa800/8, BIOS @ 0xdfec0000/17
...
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
...
(II) LoadModule: "r128"
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 6.4.18
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
...
(II) ATI: ATI driver (version 6.4.18) for chipsets: ati, ativga
...
(--) Chipset ATI Rage 128 Pro GL PF (AGP) found
(II) Loading sub module "r128"
(II) LoadModule: "r128"
(II) Reloading /usr/X11R6/lib/modules/drivers/r128_drv.o
...
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) R128(0): PCI bus 1 card 0 func 0
(**) R128(0): Depth 24, (--) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(**) R128(0): Option "AGPMode" "4"
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) R128(0): initializing int10
(II) R128(0): Primary V_BIOS segment is: 0xc000
(--) R128(0): Chipset: "ATI Rage 128 Pro GL PF (AGP)" (ChipID = 0x5046)
(--) R128(0): Linear framebuffer at 0xd8000000
(--) R128(0): MMIO registers at 0xdfefc000
(--) R128(0): BIOS at 0xdfec0000
(II) R128(0): Video RAM override, using 32768 kB instead of 32768 kB
(**) R128(0): VideoRAM: 32768 kByte (64-bit SDR SGRAM 1:1)
(**) R128(0): Using external CRT for display
(WW) R128(0): Can't determine panel dimensions, and none specified. Disabling programming of FP registers.
(II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=40000; xclk=12000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE Version 2.0
(II) R128(0): VESA VBE Total Mem: 32768 kB
(II) R128(0): VESA VBE OEM: ATI RAGE128
(II) R128(0): VESA VBE OEM Software Rev: 1.0
(II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) R128(0): VESA VBE OEM Product: R128
(II) R128(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) R128(0): VESA VBE DDC supported
(II) R128(0): VESA VBE DDC Level 2
(II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
(II) R128(0): VESA VBE DDC read successfully
(II) R128(0): Manufacturer: SAM Model: 4ee9 Serial#: 1346842935
(II) R128(0): Year: 2001 Week: 2
(II) R128(0): EDID Version: 1.2
(II) R128(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) R128(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen
(II) R128(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) R128(0): Gamma: 2.26
(II) R128(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) R128(0): First detailed timing is preferred mode
(II) R128(0): GTF timings supported
(II) R128(0): redX: 0.639 redY: 0.323 greenX: 0.275 greenY: 0.597
(II) R128(0): blueX: 0.143 blueY: 0.062 whiteX: 0.283 whiteY: 0.298
(II) R128(0): Supported VESA Video Modes:
(II) R128(0): 720x400 на 70Hz
(II) R128(0): 720x400 на 88Hz
(II) R128(0): 640x480 на 60Hz
(II) R128(0): 640x480 на 67Hz
(II) R128(0): 640x480 на 72Hz
(II) R128(0): 640x480 на 75Hz
(II) R128(0): 800x600 на 56Hz
(II) R128(0): 800x600 на 60Hz
(II) R128(0): 800x600 на 72Hz
(II) R128(0): 800x600 на 75Hz
(II) R128(0): 832x624 на 75Hz
(II) R128(0): 1024x768 на 87Hz (interlaced)
(II) R128(0): 1024x768 на 60Hz
(II) R128(0): 1024x768 на 70Hz
(II) R128(0): 1024x768 на 75Hz
(II) R128(0): 1280x1024 на 75Hz
(II) R128(0): 1152x870 на 75Hz
(II) R128(0): Manufacturer's mask: 0
(II) R128(0): Supported Future Video Modes:
(II) R128(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) R128(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) R128(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) R128(0): #3: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) R128(0): #4: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) R128(0): #5: hsize: 1024 vsize 768 refresh: 100 vid: 26721
(II) R128(0): #6: hsize: 2048 vsize 1536 refresh: 60 vid: 16609
(II) R128(0): Supported additional Video Mode:
(II) R128(0): clock: 157.5 MHz Image Size: 312 x 234 mm
(II) R128(0): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728 h_border: 0
(II) R128(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0
(II) R128(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 96 kHz, PixClock max 210 MHz
(II) R128(0): Monitor name: S/M 700IFT
(II) R128(0): Serial No: H3LR104508
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(==) R128(0): Write-combining range (0xd8000000,0x2000000)
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(II) R128(0): I2C bus "DDC" initialized.
(II) R128(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) R128(0): I2C device "DDC:ddc2" removed.
(EE) R128(0): No DFP detected
(II) R128(0): Samsung|Samsung SyncMaster 700IFT (CSH780B*): Using hsync range of 30.00-96.00 kHz
(II) R128(0): Samsung|Samsung SyncMaster 700IFT (CSH780B*): Using vrefresh range of 50.00-160.00 Hz
(II) R128(0): Clock range: 12.50 to 400.00 MHz
...
(--) R128(0): Virtual size is 1024x768 (pitch 1024)
...
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) R128(0): Using AGP 4x mode
(!!) R128(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
...
(==) R128(0): Write-combining range (0xd8000000,0x2000000)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) R128(0): [drm] loaded kernel module for "r128" driver
(II) R128(0): [drm] created "r128" driver at busid "PCI:1:0:0"
(II) R128(0): [drm] added 8192 byte SAREA at 0xd0b2f000
(II) R128(0): [drm] mapped SAREA 0xd0b2f000 to 0x40016000
(II) R128(0): [drm] framebuffer handle = 0xd8000000
(II) R128(0): [drm] added 1 reserved context for kernel
(II) R128(0): [agp] Mode 0x1f000217 [AGP 0x1106/0x3099; Card 0x1002/0x5046]
(II) R128(0): [agp] 8192 kB allocated with handle 0xd2b33000
(II) R128(0): [agp] ring handle = 0xe0000000
(II) R128(0): [agp] Ring mapped at 0x421e4000
(II) R128(0): [agp] ring read ptr handle = 0xe0101000
(II) R128(0): [agp] Ring read ptr mapped at 0x40018000
(II) R128(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) R128(0): [agp] Vertex/indirect buffers mapped at 0x422e5000
(II) R128(0): [agp] AGP texture map handle = 0xe0302000
(II) R128(0): [agp] AGP Texture map mapped at 0x424e5000
(II) R128(0): [drm] register handle = 0xdfefc000
(II) R128(0): [dri] Visual configs initialized
(II) R128(0): CCE in BM mode
(II) R128(0): Using 8 MB AGP aperture
(II) R128(0): Using 1 MB for the ring buffer
(II) R128(0): Using 2 MB for vertex/indirect buffers
(II) R128(0): Using 5 MB for AGP textures
(II) R128(0): Memory manager initialized to (0,0) (1024,3840)
(II) R128(0): Reserved area from (0,768) to (1024,770)
(II) R128(0): Largest offscreen area available: 1024 x 3070
(II) R128(0): Reserved back buffer from (0,770) to (1024,1538)
(II) R128(0): Reserved depth buffer from (0,1538) to (1024,2307)
(II) R128(0): Reserved depth span from (0,2306) offset 0x902000
(II) R128(0): Reserved 17408 kb for textures at offset 0xf00000
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
14 256x256 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using hardware cursor (scanline 9228)
(II) R128(0): Largest offscreen area available: 1024 x 1531
(**) Option "dpms" "on"
(**) R128(0): DPMS enabled
(WW) R128(0): Option "UseCCEFor2D" is not used
(II) R128(0): X context handle = 0x00000001
(II) R128(0): [drm] installed DRM signal handler
(II) R128(0): [DRI] installation complete
(II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers
(II) R128(0): [drm] Mapped 128 vertex/indirect buffers
(II) R128(0): [drm] dma control initialized, using IRQ 16
(II) R128(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
GetModeLine - scrn: 0 clock: 94500
GetModeLine - hdsp: 1024 hbeg: 1072 hend: 1168 httl: 1376
vdsp: 768 vbeg: 769 vend: 772 vttl: 808 flags: 5
(II) 3rd Button detected: disabling emulate3Button
И, наконец, выдержка из /var/log/messages:
Sep 18 10:17:14 mec1 -- MARK --
Sep 18 10:33:37 mec1 kernel: [drm:r128_freelist_get] *ERROR* returning NULL!
Sep 18 10:33:57 mec1 last message repeated 16 times
Sep 18 09:45:40 mec1 syslogd 1.4.1: restart.
Что поправить?
--
С уважением,
Юрий Аникин
Подробная информация о списке рассылки Sisyphus