[sisyphus] Matrox Parhelia

[Victor (Stalker) Skurihin]

Привет, народ!

Есть видюха Matrox Parhelia 512.
Поставил ALTLinux Master 2.2. Ядро 2.4.20:
[root на sh13 root]# cat /proc/version
Linux version 2.4.20-alt5-up (gcc version 2.96 20000731 (ALT Linux,
build 2.96-alt3)) #1 Sat May 3 14:48:29 MSD 2003

скачал дрова под неё 
ftp://ftp.matrox.com/pub/mga/archive/linux/2002/mtxdrivers_0.2.1.tgz

поставил:
[root на sh13 mtxdrivers]# sh install.sh

Всё встало нормалько. Кернельный модуль скомпилился и подгрузился:
[root на sh13 root]# lsmod
Module                  Size  Used by    Tainted: P
autofs4                 8084   1  (autoclean)
{...CUT...}
i2c-core               15176   0  [i2c-isa via686a i2c-viapro i2c-dev 
mtx                    22812   0  (unused)
usb-uhci               21516   0  (unused)
usbmouse                1784   0  (unused)
hid                    17956   0  (unused)
usbcore                57972   1  [usb-uhci usbmouse hid]
mousedev                3892   1
keybdev                 1728   0  (unused)
input                   3328   0  [usbmouse hid mousedev keybdev]
agpgart                29352   2
rtc                     6012   0  (autoclean)
[root на sh13 root]# cat /var/log/message
{...CUT...}
May  5 12:25:31 sh13 kernel: agpgart: Maximum main memory to use for agp
memory: 94M
May  5 12:25:31 sh13 kernel: agpgart: Detected Via Apollo Pro chipset
May  5 12:25:31 sh13 kernel: agpgart: AGP aperture is 64M @ 0xd8000000
May  5 12:25:31 sh13 kernel: mice: PS/2 mouse device common for all mice
May  5 12:25:31 sh13 kernel: usb.c: registered new driver usbdevfs
{...CUT...}
May  5 12:25:31 sh13 kernel: hub.c: new USB device 00:07.2-1, assigned
address 2
May  5 12:25:31 sh13 kernel: [mtx] MTX Driver version 0.2.0
May  5 12:25:31 sh13 kernel: [mtx] AGP driver v0.99 on VIA Apollo Pro
May  5 12:25:31 sh13 kernel: [mtx] 0x0527(sub:0xffffffff) board found at
01:00.0
{...CUT...}

поправил XF86Config:
{...CUT...}
Section "Device"
        Identifier  "MGA CARD 1"
        Driver      "mtx"
        BusID       "PCI:1:0:0"
EndSection

Section "Module"
        Load  "dbe"
        SubSection "extmod"
                Option "omit xfree86-dga"
        EndSubSection
        Load  "type1"
        Load  "freetype"

        Load    "GLcore"
        Load    "dri"
        Load    "glx"
EndSection

Section "DRI"
        Mode    0666
EndSection                                                                     
Зпрустил X-ы.
Проблема в том что не заработало аппаратное ускорение:
[root на sh13 root]# cat /var/log/XFree86.0.log
{...CUT...}
(II) MTX: driver for Matrox chipsets: Parhelia 512, Parhelia
(II) Primary Device is: PCI 01:00:0
(--) Chipset Parhelia 512 found
{...CUT...}
(II) Loading sub module "parhl"
(II) LoadModule: "parhl"
(II) Loading /usr/X11R6/lib/modules/linux/libparhl.so
(II) Module Parhelia device driver: vendor="Matrox"
        compiled for 4.2.1, module version = 0.2.1
        Module class: XFree86 Video Driver
        ABI class: XFree86 Video Driver, version 0.5
(II) MTX(0): Using Parhelia library v.0.2.1 for graphics acceleration.
(II) do I need RAC?  No, I don't.
{...CUT...}
(WW) MTX(0): Cannot use Parhelia module for acceleration, device failed
to open.

[root на sh13 root]# lsmod
Module                  Size  Used by    Tainted: P
{...CUT...}
mtx                    22812   0  (unused)
{...CUT...}
agpgart                29352   2
{...CUT...}

и отрисовка идёт (: относительно ;) медленно.
Подроные логи XFree86.0.log в аттаче.
Ставил ли кто нибудь Subj?
Как включить аппаратное ускорение?

-- 
Victor (Stalker) Skurihin <stalker на nc.ru>
D&K

----------- следующая часть -----------
Было удалено вложение не в текстовом формате...
Имя     : XFree86.0.log.gz
Тип     : application/x-gzip
Размер  : 4756 байтов
Описание: =?iso-8859-1?q?=CF=D4=D3=D5=D4=D3=D4=D7=D5=C5=D4?=
Url     : <http://lists.altlinux.org/pipermail/sisyphus/attachments/20030506/fb0d426e/attachment-0002.bin>