[sisyphus] Quake3 1.32 -- мышь сдохла :-(
Dmitry Gerasimov
=?iso-8859-1?q?dima_=CE=C1_polarcup=2Eru?=
Пн Дек 1 11:58:42 MSK 2003
Canis Cerberus wrote:
>Првет всем !!!
>
>Logitech USB Optical, после очередного обновления перестала работать в Quake3
>1.32
>Симптомы: после запуска кваки курсор висит в левом верхнем углу и не двигается
>*-(
>Подскажите, пжалуйста, что делать! Вот как квака работает с мышью я совсем не
>представляю :-|
>Может проблема в конфигурации ИКСов (см. конфиг во вложенном файле);
>наверняка ведь кто-нибудь сталкивался с этой проблемой; откликнитесь что-ли !
>
>
обновить кваку до самого последнего патча. версия, по моему 1.32b
>С уважением
>
>
>------------------------------------------------------------------------
>
>
># File generated by XFdrake.
>
># **********************************************************************
># Refer to the XF86Config(4/5) man page for details about the format of
># this file.
># **********************************************************************
>
>Section "Files"
>
> RgbPath "/usr/X11R6/lib/X11/rgb"
>
># Multiple FontPath entries are allowed (they are concatenated together)
># By default, Mandrake 6.0 and later now use a font server independent of
># the X server to render fonts.
>
> FontPath "unix/:-1"
>
>EndSection
>
># **********************************************************************
># Server flags section.
># **********************************************************************
>
>Section "ServerFlags"
>
> # Uncomment this to cause a core dump at the spot where a signal is
> # received. This may leave the console in an unusable state, but may
> # provide a better stack trace in the core dump to aid in debugging
> #NoTrapSignals
>
> # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
> # This allows clients to receive this key event.
> #DontZap
>
> # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
> # sequences. This allows clients to receive these key events.
> #DontZoom
>
> # This allows the server to start up even if the
> # mouse device can't be opened/initialised.
> AllowMouseOpenFail
>
>EndSection
>
># **********************************************************************
># Input devices
># **********************************************************************
>
># **********************************************************************
># Keyboard section
># **********************************************************************
>
>Section "InputDevice"
>
> Identifier "Keyboard1"
> Driver "Keyboard"
> Option "AutoRepeat" "250 30"
>
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc105"
> Option "XkbVariant" ",winkeys"
> Option "XkbLayout" "us,ru"
># Option "XkbOptions" "grp:caps_toggle"
> Option "XkbOptions" "grp:caps_toggle,grp:rwin_switch,grp_led:scroll"
>
>EndSection
>
># **********************************************************************
># Pointer section
># **********************************************************************
>
>Section "InputDevice"
>
> Identifier "Mouse1"
> Driver "mouse"
> Option "Protocol" "IMPS/2"
> Option "Device" "/dev/mouse"
> Option "ZAxisMapping" "4 5"
>
># ChordMiddle is an option for some 3-button Logitech mice
>
># Option "ChordMiddle"
>
>EndSection
>
>
>#Section "InputDevice"
>#
># Identifier "Mouse2"
># Driver "mouse"
># Option "Protocol" "PS/2"
># Option "Device" "/dev/psaux"
># Option "Emulate3Buttons"
># Option "Emulate3Timeout" "50"
>
># ChordMiddle is an option for some 3-button Logitech mice
>
># Option "ChordMiddle"
>
>#EndSection
>
>
>
>Section "Module"
>
># This loads the DBE extension module.
>
> Load "dbe"
>
># This loads the Video for Linux module.
> Load "v4l"
>
> Load "glx"
> Load "dri"
>
>
># This loads the miscellaneous extensions module, and disables
># initialisation of the XFree86-DGA extension within that module.
>
> SubSection "extmod"
> #Option "omit xfree86-dga"
>
> EndSubSection
>
># This loads the Type1 and FreeType font modules
>
> Load "type1"
> Load "freetype"
>EndSection
>
>
>Section "DRI"
> Mode 0666
>EndSection
>
>
># **********************************************************************
># Monitor section
># **********************************************************************
>
># Any number of monitor sections may be present
>
>Section "Monitor"
> Identifier "CTX|CTX PR711F series"
> VendorName "CTX"
> ModelName "Unknown"
>
>
># HorizSync is in kHz unless units are specified.
># HorizSync may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
> HorizSync 30.0-95.0
>
>
># VertRefresh is in Hz unless units are specified.
># VertRefresh may be a comma separated list of discrete values, or a
># comma separated list of ranges of values.
># NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
># USER MANUAL FOR THE CORRECT NUMBERS.
> VertRefresh 50.0-160.0
>
>
># This is a set of extended mode timings typically used for laptop,
># TV fullscreen mode or DVD fullscreen output.
># These are available along with standard mode timings.
>
># Sony Vaio C1(X,XS,VE,VN)?
># 1024x480 @ 85.6 Hz, 48 kHz hsync
>ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
>
># 768x576 @ 79 Hz, 50 kHz hsync
>ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
># 768x576 @ 100 Hz, 61.6 kHz hsync
>ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
>
>
>EndSection
>
>
>Section "Monitor"
> Identifier "monitor2"
> VendorName "CTX"
> ModelName "Unknown"
>
> HorizSync 30.0-95.0
> VertRefresh 50.0-160.0
>EndSection
>
>
>
># **********************************************************************
># Graphics device section
># **********************************************************************
>
>Section "Device"
> Identifier "Generic VGA"
> Driver "vga"
>EndSection
>
>Section "Device"
> Identifier "Matrox Millennium G450 DualHead 1"
> VendorName ""
> BoardName ""
> Driver "mga"
> # Clock lines
>
>
> # Uncomment following option if you see a big white block
> # instead of the cursor!
> # Option "sw_cursor"
>
> Option "AGPMode" "1"
> Option "DPMS" "on"
> Screen 0
> BusID "PCI:1:0:0"
>EndSection
>
>
>Section "Device"
> Identifier "Matrox Millennium G450 DualHead 2"
> VendorName ""
> BoardName ""
> Driver "mga"
> # Clock lines
>
>
> # Uncomment following option if you see a big white block
> # instead of the cursor!
> # Option "sw_cursor"
>
> Option "AGPMode" "1"
> Option "DPMS" "on"
> Screen 1
> BusID "PCI:1:0:0"
>EndSection
>
>
>
># **********************************************************************
># Screen sections
># **********************************************************************
>
>
>Section "Screen"
> Identifier "screen1"
> Device "Matrox Millennium G450 DualHead 1"
> Monitor "CTX|CTX PR711F series"
> DefaultFbBpp 32
> DefaultColorDepth 24
> Subsection "Display"
> Depth 8
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 15
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 16
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 24
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 32
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
>EndSection
>
>Section "Screen"
> Identifier "screen2"
> Device "Matrox Millennium G450 DualHead 2"
> Monitor "monitor2"
> DefaultFbBpp 32
> DefaultColorDepth 24
> Subsection "Display"
> Depth 8
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 15
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 16
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 24
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
> Subsection "Display"
> Depth 32
> Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
> ViewPort 0 0
> EndSubsection
>EndSection
>
>
>Section "ServerLayout"
> Identifier "layout1"
> Screen "screen1"
> Screen "screen2" RightOf "screen1"
># Option "Xinerama" "on"
>
> InputDevice "Mouse1" "CorePointer"
>
># InputDevice "Mouse2" "SendCoreEvents"
>
> InputDevice "Keyboard1" "CoreKeyboard"
>EndSection
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Sisyphus mailing list
>Sisyphus на altlinux.ru
>http://altlinux.ru/mailman/listinfo/sisyphus
>
>
Подробная информация о списке рассылки Sisyphus