[#402937] [test-only] p11 FAILED (try 14) qhull.git=2020.2-alt3 heatshrink.git=0.4.1-alt1 catch.git=3.11.0-alt1 ...
Girar awaiter (romenskiy)
girar-builder at altlinux.org
Fri Jan 16 19:56:50 MSK 2026
https://git.altlinux.org/tasks/402937/logs/events.14.1.log
https://packages.altlinux.org/tasks/402937
subtask name aarch64 i586 x86_64
#740 qhull 1:35 1:03 1:03
#760 heatshrink 47 31 32
#770 catch 1:10 40 44
#774 libbgcode 1:18 52 50
#776 nanosvg-fltk 42 26 26
#1240 z3 12:02 8:17 6:52
#2200 PrusaSlicer failed - failed
2026-Jan-16 16:28:02 :: test-only task #402937 for p11 resumed by romenskiy:
#100 removed
#200 removed
#300 removed
#400 removed
#500 removed
#520 removed
#540 removed
#600 removed
#700 removed
#740 build 2020.2-alt3 from /people/romenskiy/packages/qhull.git fetched at 2026-Jan-16 16:22:56
#760 build 0.4.1-alt1 from /people/romenskiy/packages/heatshrink.git fetched at 2026-Jan-16 16:23:24
#770 build 3.11.0-alt1 from /people/romenskiy/packages/catch.git fetched at 2026-Jan-16 16:23:53
#774 build 0.0-alt1 from /people/romenskiy/packages/libbgcode.git fetched at 2026-Jan-16 16:24:14
#776 build 2023.12.02-alt1 from /people/romenskiy/packages/nanosvg-fltk.git fetched at 2026-Jan-16 16:26:11
#1000 removed
#1100 removed
#1200 removed
#1240 build 4.15.4-alt1 from /gears/z/z3.git fetched at 2025-Dec-15 15:22:53
#1300 removed
#1400 removed
#1500 removed
#1600 removed
#1700 removed
#2000 removed
#2100 removed
#2200 build 2.9.4-alt1 from /people/romenskiy/packages/PrusaSlicer.git fetched at 2026-Jan-16 16:26:49
#2300 build 2.7.61.10-alt1 from /people/romenskiy/packages/SuperSlicer.git fetched at 2026-Jan-16 16:27:26
2026-Jan-16 16:28:03 :: created build repo
2026-Jan-16 16:28:05 :: [x86_64] #740 qhull.git 2020.2-alt3: build start
2026-Jan-16 16:28:05 :: [i586] #740 qhull.git 2020.2-alt3: build start
2026-Jan-16 16:28:05 :: [aarch64] #740 qhull.git 2020.2-alt3: build start
2026-Jan-16 16:29:08 :: [x86_64] #740 qhull.git 2020.2-alt3: build OK
2026-Jan-16 16:29:08 :: [i586] #740 qhull.git 2020.2-alt3: build OK
2026-Jan-16 16:29:08 :: [x86_64] #760 heatshrink.git 0.4.1-alt1: build start
2026-Jan-16 16:29:08 :: [i586] #760 heatshrink.git 0.4.1-alt1: build start
2026-Jan-16 16:29:39 :: [i586] #760 heatshrink.git 0.4.1-alt1: build OK
2026-Jan-16 16:29:40 :: [i586] #770 catch.git 3.11.0-alt1: build start
2026-Jan-16 16:29:40 :: [aarch64] #740 qhull.git 2020.2-alt3: build OK
2026-Jan-16 16:29:40 :: [x86_64] #760 heatshrink.git 0.4.1-alt1: build OK
2026-Jan-16 16:29:40 :: [aarch64] #760 heatshrink.git 0.4.1-alt1: build start
2026-Jan-16 16:29:40 :: [x86_64] #770 catch.git 3.11.0-alt1: build start
2026-Jan-16 16:30:20 :: [i586] #770 catch.git 3.11.0-alt1: build OK
2026-Jan-16 16:30:21 :: [i586] #774 libbgcode.git 0.0-alt1: build start
2026-Jan-16 16:30:24 :: [x86_64] #770 catch.git 3.11.0-alt1: build OK
2026-Jan-16 16:30:24 :: [x86_64] #774 libbgcode.git 0.0-alt1: build start
2026-Jan-16 16:30:27 :: [aarch64] #760 heatshrink.git 0.4.1-alt1: build OK
2026-Jan-16 16:30:27 :: [aarch64] #770 catch.git 3.11.0-alt1: build start
2026-Jan-16 16:31:13 :: [i586] #774 libbgcode.git 0.0-alt1: build OK
2026-Jan-16 16:31:13 :: [i586] #776 nanosvg-fltk.git 2023.12.02-alt1: build start
2026-Jan-16 16:31:14 :: [x86_64] #774 libbgcode.git 0.0-alt1: build OK
2026-Jan-16 16:31:15 :: [x86_64] #776 nanosvg-fltk.git 2023.12.02-alt1: build start
2026-Jan-16 16:31:37 :: [aarch64] #770 catch.git 3.11.0-alt1: build OK
2026-Jan-16 16:31:38 :: [aarch64] #774 libbgcode.git 0.0-alt1: build start
2026-Jan-16 16:31:39 :: [i586] #776 nanosvg-fltk.git 2023.12.02-alt1: build OK
2026-Jan-16 16:31:40 :: [i586] #1240 z3.git 4.15.4-alt1: build start
2026-Jan-16 16:31:41 :: [x86_64] #776 nanosvg-fltk.git 2023.12.02-alt1: build OK
2026-Jan-16 16:31:41 :: [x86_64] #1240 z3.git 4.15.4-alt1: build start
2026-Jan-16 16:32:56 :: [aarch64] #774 libbgcode.git 0.0-alt1: build OK
2026-Jan-16 16:32:57 :: [aarch64] #776 nanosvg-fltk.git 2023.12.02-alt1: build start
2026-Jan-16 16:33:39 :: [aarch64] #776 nanosvg-fltk.git 2023.12.02-alt1: build OK
2026-Jan-16 16:33:39 :: [aarch64] #1240 z3.git 4.15.4-alt1: build start
2026-Jan-16 16:38:33 :: [x86_64] #1240 z3.git 4.15.4-alt1: build OK
2026-Jan-16 16:38:33 :: [x86_64] #2200 PrusaSlicer.git 2.9.4-alt1: build start
2026-Jan-16 16:39:57 :: [i586] #1240 z3.git 4.15.4-alt1: build OK
2026-Jan-16 16:39:57 :: [i586] #2200 PrusaSlicer.git 2.9.4-alt1: build start
2026-Jan-16 16:40:12 :: [i586] #2200 PrusaSlicer.git 2.9.4-alt1: build SKIPPED
2026-Jan-16 16:40:13 :: [i586] #2300 SuperSlicer.git 2.7.61.10-alt1: build start
2026-Jan-16 16:40:28 :: [i586] #2300 SuperSlicer.git 2.7.61.10-alt1: build SKIPPED
2026-Jan-16 16:45:41 :: [aarch64] #1240 z3.git 4.15.4-alt1: build OK
2026-Jan-16 16:45:42 :: [aarch64] #2200 PrusaSlicer.git 2.9.4-alt1: build start
[x86_64] 675 | mAuxBufferPtrs.reset(new NonConstBufferType[auxBufferCount]);
[x86_64] /usr/include/c++/13/new: In member function '__ct_base .constprop':
[x86_64] /usr/include/c++/13/new:128:26: note: in a call to allocation function 'operator new []' declared here
[x86_64] 128 | _GLIBCXX_NODISCARD void* operator new[](std::size_t) _GLIBCXX_THROW (std::bad_alloc)
[x86_64] opt.so /usr/lib64/libz3.so.4.15.4.0
[x86_64] gmake[2]: Leaving directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/x86_64-alt-linux'
[x86_64] gmake[1]: Entering directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/x86_64-alt-linux'
[x86_64] [ 62%] Built target libslic3r_tests
[x86_64] gmake[1]: Leaving directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/x86_64-alt-linux'
[x86_64] gmake: *** [Makefile:146: all] Error 2
2026-Jan-16 16:46:30 :: [x86_64] PrusaSlicer.git 2.9.4-alt1: remote: build failed
2026-Jan-16 16:46:30 :: [x86_64] #2200 PrusaSlicer.git 2.9.4-alt1: build FAILED
2026-Jan-16 16:46:30 :: [x86_64] requesting cancellation of task processing
[aarch64] 675 | mAuxBufferPtrs.reset(new NonConstBufferType[auxBufferCount]);
[aarch64] /usr/include/c++/13/new: In member function '__ct_base .constprop':
[aarch64] /usr/include/c++/13/new:128:26: note: in a call to allocation function 'operator new []' declared here
[aarch64] 128 | _GLIBCXX_NODISCARD void* operator new[](std::size_t) _GLIBCXX_THROW (std::bad_alloc)
[aarch64] opt.so /usr/lib64/libz3.so.4.15.4.0
[aarch64] gmake[2]: Leaving directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/aarch64-alt-linux'
[aarch64] gmake[1]: Entering directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/aarch64-alt-linux'
[aarch64] [ 62%] Built target libslic3r_tests
[aarch64] gmake[1]: Leaving directory '/usr/src/RPM/BUILD/PrusaSlicer-2.9.4/aarch64-alt-linux'
[aarch64] gmake: *** [Makefile:146: all] Error 2
2026-Jan-16 16:56:49 :: [aarch64] PrusaSlicer.git 2.9.4-alt1: remote: build failed
2026-Jan-16 16:56:49 :: [aarch64] #2200 PrusaSlicer.git 2.9.4-alt1: build FAILED
2026-Jan-16 16:46:30 :: [x86_64] build FAILED
2026-Jan-16 16:56:50 :: [aarch64] build FAILED
2026-Jan-16 16:56:50 :: task #402937 for p11 FAILED
More information about the Sisyphus-incominger
mailing list