[#310345] [test-only] FAILED kdump-tools.git=1.8-alt1
Girar awaiter (vt)
girar-builder at altlinux.org
Sun Nov 20 19:59:10 MSK 2022
https://git.altlinux.org/tasks/310345/logs/events.1.1.log
subtask name aarch64 armh i586 ppc64le x86_64
#100 kdump-tools 30 43 18 35 18
2022-Nov-20 16:54:42 :: test-only task #310345 for sisyphus started by vt:
#100 build 1.8-alt1 from /people/vt/packages/kdump-tools.git fetched at 2022-Nov-20 16:54:40
2022-Nov-20 16:54:43 :: [aarch64] #100 kdump-tools.git 1.8-alt1: build start
2022-Nov-20 16:54:43 :: [i586] #100 kdump-tools.git 1.8-alt1: build start
2022-Nov-20 16:54:43 :: [ppc64le] #100 kdump-tools.git 1.8-alt1: build start
2022-Nov-20 16:54:43 :: [x86_64] #100 kdump-tools.git 1.8-alt1: build start
2022-Nov-20 16:54:43 :: [armh] #100 kdump-tools.git 1.8-alt1: build start
2022-Nov-20 16:55:01 :: [x86_64] #100 kdump-tools.git 1.8-alt1: build OK
2022-Nov-20 16:55:01 :: [i586] #100 kdump-tools.git 1.8-alt1: build OK
2022-Nov-20 16:55:13 :: [aarch64] #100 kdump-tools.git 1.8-alt1: build OK
2022-Nov-20 16:55:18 :: [ppc64le] #100 kdump-tools.git 1.8-alt1: build OK
2022-Nov-20 16:55:26 :: [armh] #100 kdump-tools.git 1.8-alt1: build OK
2022-Nov-20 16:55:40 :: #100: kdump-tools.git 1.8-alt1: build check OK
2022-Nov-20 16:55:42 :: build check OK
2022-Nov-20 16:55:44 :: noarch check OK
2022-Nov-20 16:55:46 :: plan: src +1 -0 =17899, aarch64 +1 -0 =30422, armh +1 -0 =28499, i586 +1 -0 =30562, noarch +1 -0 =18418, ppc64le +1 -0 =29926, x86_64 +1 -0 =31373
2022-Nov-20 16:56:31 :: patched apt indices
2022-Nov-20 16:56:44 :: created next repo
2022-Nov-20 16:56:54 :: duplicate provides check OK
2022-Nov-20 16:57:31 :: dependencies check OK
2022-Nov-20 16:57:33 :: [x86_64 i586 aarch64 ppc64le armh] ELF symbols check OK
x86_64: kdump-tools=1.8-alt1 post-install unowned files:
/etc/rc.d/init.d/kdump-tools
/var/crash
2022-Nov-20 16:57:45 :: [x86_64] #100 kdump-tools: install check OK
i586: kdump-tools=1.8-alt1 post-install unowned files:
/etc/rc.d/init.d/kdump-tools
/var/crash
2022-Nov-20 16:57:45 :: [i586] #100 kdump-tools: install check OK
aarch64: kdump-tools=1.8-alt1 post-install unowned files:
/etc/rc.d/init.d/kdump-tools
/var/crash
2022-Nov-20 16:57:54 :: [aarch64] #100 kdump-tools: install check OK
ppc64le: kdump-tools=1.8-alt1 post-install unowned files:
/etc/rc.d/init.d/kdump-tools
/var/crash
2022-Nov-20 16:57:57 :: [ppc64le] #100 kdump-tools: install check OK
armh: kdump-tools=1.8-alt1 post-install unowned files:
/etc/rc.d/init.d/kdump-tools
/var/crash
2022-Nov-20 16:58:06 :: [armh] #100 kdump-tools: install check OK
i586: kdump-tools-checkinstall=1.8-alt1 install failed:
<13>Nov 20 16:57:57 rpmi: kdump-tools-checkinstall-1.8-alt1 sisyphus+310345.100.1.1 1668963300 installed
+ cd /tmp
+ sed -i -e /#KDUMP_CMDLINE_REMOVE/s/#// -e '/^KDUMP_CMDLINE_REMOVE/s/"$/ quiet"/' -e /#KDUMP_CMDLINE_APPEND/s/#// -e '/^KDUMP_CMDLINE_APPEND/s/"$/ rw"/' /etc/sysconfig/kdump-tools
+ timeout 300 vm-run --create-rootfs=i --kvm=cond --append=crashkernel=256M '
set -xe
make-initrd
kdump-config show
kdump-config load
kdump-config test
sleep 1
echo 1 >/proc/sys/kernel/sysrq
echo c >/proc/sysrq-trigger
'
Creating regular file i
find: '/.out': Permission denied
find: '/.host': Permission denied
i: clean, 13484/70992 files, 156112/283910 blocks
+ qemu-system-i386 -enable-kvm -m 1536M -smp cores=32 -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -serial mon:stdio -kernel /boot/vmlinuz-6.0.9-un-def-alt1 -initrd /tmp/initramfs-6.0.9-un-def-alt1.img -sandbox on,spawn=deny -bios bios.bin -drive file=i,format=raw,if=virtio -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/tmp.c7UOkqhSJN crashkernel=256M NOTTY no_timer_check root=UUID=c009276d-f164-4a65-a2c3-7c3d5f0bee7f rootfstype=ext4'
[ 0.399366] mce: Unable to init MCE device (rc: -5)
++ make-initrd
[00:00:00] Config file: /etc/initrd.mk
[00:00:01] Generating module dependencies on host ...
[00:00:06] Used features: add-modules add-udev-rules cleanup compress depmod-image network qemu rdshell rootfs system-glibc
[00:00:06] Packed modules: 8139cp 8390 9pnet 9pnet_virtio af_packet ahci ata_generic ata_piix bluetooth cdrom crypto_engine e100 e1000 e1000e ecdh_generic evdev failover fuse gpio-virtio hid hid-generic i2c-virtio input-leds libahci libata mii ne2k-pci net_failover pata_acpi pcnet32 rfkill rng-core rpmsg_core rpmsg_ns scsi_common scsi_mod serio_raw snd snd-pcm snd-timer soundcore sr_mod vdpa virtio virtio-iommu virtio-rng virtio_balloon virtio_blk virtio_bt virtio_console virtio_crypto virtio_dma_buf virtio_input virtio_mmio virtio_net virtio_pci virtio_pci_legacy_dev virtio_pci_modern_dev virtio_ring virtio_rpmsg_bus virtio_scsi virtio_snd virtio_vdpa virtiofs vmw_vsock_virtio_transport vmw_vsock_virtio_transport_common vp_vdpa vsock
[00:00:06] Unpacked size: 28M
[00:00:06] Image size: 7.9M
[00:00:06] Image is saved as /boot/initrd-6.0.9-un-def-alt1.img
++ kdump-config show
DUMP_MODE: kdump
USE_KDUMP: 1
KDUMP_COREDIR: /var/crash
crashkernel addr: 0x10000000
/boot/vmlinuz-6.0.9-un-def-alt1
kdump initrd:
/boot/initrd-6.0.9-un-def-alt1.img
current state: Not ready to kdump
kexec command:
no kexec command recorded
++ kdump-config load
/usr/sbin/kdump-config: line 541: file: command not found
loaded kdump kernel [ DONE ]
kdump-config couldn't set panic trigger (sysctl binary not available) [PASSED]
++ kdump-config test
/usr/sbin/kdump-config: line 541: file: command not found
USE_KDUMP: 1
KDUMP_COREDIR: /var/crash
crashkernel addr 0x10000000
kdump kernel addr relocatable
kdump kernel:
/boot/vmlinuz-6.0.9-un-def-alt1
kdump initrd:
/boot/initrd-6.0.9-un-def-alt1.img
kexec command to be used:
/sbin/kexec -p --command-line="console=ttyS0 mitigations=off nokaslr panic=-1 SCRIPT=/tmp/tmp.c7UOkqhSJN NOTTY no_timer_check root=UUID=c009276d-f164-4a65-a2c3-7c3d5f0bee7f rootfstype=ext4 systemd.unit=kdump-tools-dump.service sysrq=yes panic=9 nokaslr irqpoll reset_devices cgroup_disable=memory udev.children-max=4 transparent_hugepage=never cma=0 hugetlb_cma=0 novmcoredd nr_cpus=1 nousb rw" --initrd=/boot/initrd-6.0.9-un-def-alt1.img /boot/vmlinuz-6.0.9-un-def-alt1
++ sleep 1
++ echo 1
++ echo c
[ 7.902309] sysrq: Trigger a crash
[ 7.902899] Kernel panic - not syncing: sysrq triggered crash
[ 7.903299] CPU: 2 PID: 191 Comm: sh Kdump: loaded Tainted: G S W 6.0.9-un-def-alt1 #1
[ 7.903940] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-alt1 04/01/2014
[ 7.904548] Call Trace:
[ 7.904728] dump_stack_lvl+0x32/0x47
[ 7.904992] dump_stack+0xd/0x12
[ 7.905230] panic+0xad/0x23f
[ 7.905449] sysrq_handle_crash+0x1c/0x20
[ 7.905742] __handle_sysrq.cold+0x4c/0x12c
[ 7.906044] ? sysrq_filter+0x4e0/0x4e0
[ 7.906323] write_sysrq_trigger+0x24/0x40
[ 7.906618] proc_reg_write+0x76/0xb0
[ 7.906883] ? proc_reg_read+0xb0/0xb0
[ 7.907154] vfs_write+0xad/0x3a0
[ 7.907398] ? syscall_exit_to_user_mode+0x1b/0x40
[ 7.907742] ksys_write+0x63/0xe0
[ 7.907982] __ia32_sys_write+0x15/0x20
[ 7.908260] do_int80_syscall_32+0x4f/0x80
[ 7.908555] ? syscall_exit_to_user_mode+0x1b/0x40
[ 7.908898] ? __ia32_sys_close+0xf/0x50
[ 7.909183] ? do_int80_syscall_32+0x59/0x80
[ 7.909491] ? syscall_exit_to_user_mode+0x1b/0x40
[ 7.909833] ? syscall_exit_to_user_mode+0x1b/0x40
[ 7.910178] ? do_int80_syscall_32+0x59/0x80
[ 7.910486] ? syscall_exit_to_user_mode+0x1b/0x40
[ 7.910829] ? do_int80_syscall_32+0x59/0x80
[ 7.911140] ? do_int80_syscall_32+0x59/0x80
[ 7.911448] ? irqentry_exit_to_user_mode+0x8/0x20
[ 7.911791] ? irqentry_exit+0x45/0x50
[ 7.912063] ? exc_page_fault+0x59/0x150
[ 7.912348] ? do_int80_syscall_32+0x59/0x80
[ 7.912656] entry_INT80_32+0xf0/0xf0
[ 7.912922] EIP: 0xb7e8e65e
[ 7.913128] Code: 2d 06 00 81 c6 05 f8 0e 00 53 83 ec 10 65 a1 0c 00 00 00 85 c0 75 25 8b 5c 24 20 8b 4c 24 24 b8 04 00 00 00 8b 54 24 28 cd 80 <3d> 00 f0 ff ff 77 4b 83 c4 10 5b 5e 5f c3 8d 74 26 00 e8 0b c5 f8
[ 7.914440] EAX: ffffffda EBX: 00000001 ECX: 01db88d0 EDX: 00000002
[ 7.914885] ESI: b7f7de3c EDI: 01db88d0 EBP: b7f7ed40 ESP: bf9de230
[ 7.915330] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246
Error: no exit code is found, failure.
+ :
+ vm-run --rootfs=i --kvm=cond '
set -xe
ls -l /var/crash/*/dmesg.*
ls -l /var/crash/*/dump.*
'
+ qemu-system-i386 -enable-kvm -m 1536M -smp cores=32 -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -serial mon:stdio -kernel /boot/vmlinuz-6.0.9-un-def-alt1 -initrd /tmp/initramfs-6.0.9-un-def-alt1.img -sandbox on,spawn=deny -bios bios.bin -drive file=i,format=raw,if=virtio -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/tmp.XmD30hCajX NOTTY no_timer_check root=UUID=c009276d-f164-4a65-a2c3-7c3d5f0bee7f rootfstype=ext4'
[ 0.399525] mce: Unable to init MCE device (rc: -5)
++ ls -l '/var/crash/*/dmesg.*'
ls: cannot access '/var/crash/*/dmesg.*': No such file or directory
error: %post(kdump-tools-checkinstall-1.8-alt1.noarch) scriptlet failed, exit status 2
error: kdump-tools-checkinstall-1.8-alt1.noarch: install failed
hsh-install: Packages installation failed.
2022-Nov-20 16:58:11 :: [i586] #100 kdump-tools-checkinstall: install check FAILED
2022-Nov-20 16:58:11 :: [i586] requesting cancellation of task processing
aarch64: kdump-tools-checkinstall=1.8-alt1 install failed:
<13>Nov 20 16:58:13 rpmi: kdump-tools-checkinstall-1.8-alt1 sisyphus+310345.100.1.1 1668963300 installed
+ cd /tmp
+ sed -i -e /#KDUMP_CMDLINE_REMOVE/s/#// -e '/^KDUMP_CMDLINE_REMOVE/s/"$/ quiet"/' -e /#KDUMP_CMDLINE_APPEND/s/#// -e '/^KDUMP_CMDLINE_APPEND/s/"$/ rw"/' /etc/sysconfig/kdump-tools
+ timeout 300 vm-run --create-rootfs=i --kvm=cond --append=crashkernel=256M '
set -xe
make-initrd
kdump-config show
kdump-config load
kdump-config test
sleep 1
echo 1 >/proc/sys/kernel/sysrq
echo c >/proc/sysrq-trigger
'
Creating regular file i
find: '/.out': Permission denied
find: '/.host': Permission denied
i: clean, 14185/89936 files, 146940/359148 blocks
+ qemu-system-aarch64 -enable-kvm -m 4096M -smp cores=8 -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -serial mon:stdio -kernel /boot/vmlinuz-6.0.9-un-def-alt1 -initrd /tmp/initramfs-6.0.9-un-def-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -drive file=i,format=raw,if=virtio -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/tmp.LoCHIGx2kV crashkernel=256M NOTTY root=UUID=0f19b9ec-a9a7-45f3-9b16-0750fc730c5d rootfstype=ext4'
++ make-initrd
[00:00:00] Config file: /etc/initrd.mk
[00:00:01] Generating module dependencies on host ...
[00:00:09] Used features: add-modules add-udev-rules cleanup compress depmod-image network qemu rdshell rootfs system-glibc
[00:00:09] Packed modules: 8139cp 8390 9pnet 9pnet_virtio af_packet ahci ata_generic ata_piix bluetooth cdrom crypto_engine e100 e1000 e1000e ecdh_generic failover fuse gpio-virtio hid hid-generic i2c-virtio libahci libata libnvdimm mii nd_virtio ne2k-pci net_failover pata_acpi pcnet32 rfkill rng-core rpmsg_core rpmsg_ns scsi_common scsi_mod snd snd-pcm snd-timer soundcore sr_mod uio uio_pdrv_genirq vdpa virtio virtio-iommu virtio-rng virtio_balloon virtio_blk virtio_bt virtio_console virtio_crypto virtio_dma_buf virtio_input virtio_mem virtio_mmio virtio_net virtio_pci virtio_pci_legacy_dev virtio_pci_modern_dev virtio_pmem virtio_ring virtio_rpmsg_bus virtio_scsi virtio_snd virtio_vdpa virtiofs vmw_vsock_virtio_transport vmw_vsock_virtio_transport_common vp_vdpa vsock
[00:00:09] Unpacked size: 26M
[00:00:09] Image size: 7.0M
[00:00:09] Image is saved as /boot/initrd-6.0.9-un-def-alt1.img
++ kdump-config show
DUMP_MODE: kdump
USE_KDUMP: 1
KDUMP_COREDIR: /var/crash
crashkernel addr: 0xe0000000
/boot/vmlinuz-6.0.9-un-def-alt1
kdump initrd:
/boot/initrd-6.0.9-un-def-alt1.img
current state: Not ready to kdump
kexec command:
no kexec command recorded
++ kdump-config load
/usr/sbin/kdump-config: line 541: file: command not found
kexec: setup_2nd_dtb failed.
kexec: load failed.
Cannot load /boot/vmlinuz-6.0.9-un-def-alt1
failed to load kdump kernel [FAILED]
+ :
+ vm-run --rootfs=i --kvm=cond '
set -xe
ls -l /var/crash/*/dmesg.*
ls -l /var/crash/*/dump.*
'
+ qemu-system-aarch64 -enable-kvm -m 4096M -smp cores=8 -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -serial mon:stdio -kernel /boot/vmlinuz-6.0.9-un-def-alt1 -initrd /tmp/initramfs-6.0.9-un-def-alt1.img -sandbox on,spawn=deny -M virt,gic-version=3 -cpu max -drive file=i,format=raw,if=virtio -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/tmp.i5YlruuGVe NOTTY root=UUID=0f19b9ec-a9a7-45f3-9b16-0750fc730c5d rootfstype=ext4'
++ ls -l '/var/crash/*/dmesg.*'
ls: cannot access '/var/crash/*/dmesg.*': No such file or directory
error: %post(kdump-tools-checkinstall-1.8-alt1.noarch) scriptlet failed, exit status 2
error: kdump-tools-checkinstall-1.8-alt1.noarch: install failed
hsh-install: Packages installation failed.
2022-Nov-20 16:58:30 :: [aarch64] #100 kdump-tools-checkinstall: install check FAILED
x86_64: kdump-tools-checkinstall=1.8-alt1 install failed:
<13>Nov 20 16:57:57 rpmi: kdump-tools-checkinstall-1.8-alt1 sisyphus+310345.100.1.1 1668963300 installed
+ cd /tmp
+ sed -i -e /#KDUMP_CMDLINE_REMOVE/s/#// -e '/^KDUMP_CMDLINE_REMOVE/s/"$/ quiet"/' -e /#KDUMP_CMDLINE_APPEND/s/#// -e '/^KDUMP_CMDLINE_APPEND/s/"$/ rw"/' /etc/sysconfig/kdump-tools
+ timeout 300 vm-run --create-rootfs=i --kvm=cond --append=crashkernel=256M '
set -xe
make-initrd
kdump-config show
kdump-config load
kdump-config test
sleep 1
echo 1 >/proc/sys/kernel/sysrq
echo c >/proc/sysrq-trigger
'
Creating regular file i
find: '/.out': Permission denied
find: '/.host': Permission denied
i: clean, 13660/88880 files, 191380/355426 blocks
+ qemu-system-x86_64 -enable-kvm -m 452581M -smp cores=32 -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -serial mon:stdio -kernel /boot/vmlinuz-6.0.9-un-def-alt1 -initrd /tmp/initramfs-6.0.9-un-def-alt1.img -sandbox on,spawn=deny -bios bios.bin -drive file=i,format=raw,if=virtio -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/tmp.BNihuJ8w1Z crashkernel=256M NOTTY no_timer_check root=UUID=f8e489ac-dc18-48fc-9b39-6b6fdd8406c7 rootfstype=ext4'
++ make-initrd
[00:00:00] Config file: /etc/initrd.mk
[00:00:01] Generating module dependencies on host ...
[00:00:09] Used features: add-modules add-udev-rules cleanup compress depmod-image network qemu rdshell rootfs system-glibc
[00:00:09] Packed modules: 8139cp 8390 9pnet 9pnet_virtio af_packet ahci ata_generic ata_piix bluetooth cdrom crypto_engine e100 e1000 e1000e ecdh_generic evdev failover fuse gpio-virtio hid hid-generic i2c-virtio input-leds libahci libata libnvdimm mii nd_virtio ne2k-pci net_failover pata_acpi pcnet32 rfkill rng-core rpmsg_core rpmsg_ns scsi_common scsi_mod serio_raw snd snd-pcm snd-timer soundcore sr_mod vdpa virtio virtio-iommu virtio-rng virtio_balloon virtio_blk virtio_bt virtio_console virtio_crypto virtio_dma_buf virtio_input virtio_mem virtio_mmio virtio_net virtio_pci virtio_pci_legacy_dev virtio_pci_modern_dev virtio_pmem virtio_ring virtio_rpmsg_bus virtio_scsi virtio_snd virtio_vdpa virtiofs vmw_vsock_virtio_transport vmw_vsock_virtio_transport_common vp_vdpa vsock
[00:00:09] Unpacked size: 32M
[00:00:09] Image size: 8.4M
[00:00:09] Image is saved as /boot/initrd-6.0.9-un-def-alt1.img
++ kdump-config show
DUMP_MODE: kdump
USE_KDUMP: 1
KDUMP_COREDIR: /var/crash
crashkernel addr: 0xaf000000
/boot/vmlinuz-6.0.9-un-def-alt1
kdump initrd:
/boot/initrd-6.0.9-un-def-alt1.img
current state: Not ready to kdump
kexec command:
no kexec command recorded
++ kdump-config load
/usr/sbin/kdump-config: line 541: file: command not found
loaded kdump kernel [ DONE ]
kdump-config couldn't set panic trigger (sysctl binary not available) [PASSED]
++ kdump-config test
/usr/sbin/kdump-config: line 541: file: command not found
USE_KDUMP: 1
KDUMP_COREDIR: /var/crash
crashkernel addr 0xaf000000
kdump kernel addr relocatable
kdump kernel:
/boot/vmlinuz-6.0.9-un-def-alt1
kdump initrd:
/boot/initrd-6.0.9-un-def-alt1.img
kexec command to be used:
/sbin/kexec -p --command-line="console=ttyS0 mitigations=off nokaslr panic=-1 SCRIPT=/tmp/tmp.BNihuJ8w1Z NOTTY no_timer_check root=UUID=f8e489ac-dc18-48fc-9b39-6b6fdd8406c7 rootfstype=ext4 systemd.unit=kdump-tools-dump.service sysrq=yes panic=9 nokaslr irqpoll reset_devices cgroup_disable=memory udev.children-max=4 transparent_hugepage=never cma=0 hugetlb_cma=0 novmcoredd nr_cpus=1 mce=off numa=off acpi_no_memhotplug nokaslr hest_disable rw" --initrd=/boot/initrd-6.0.9-un-def-alt1.img /boot/vmlinuz-6.0.9-un-def-alt1
++ sleep 1
++ echo 1
++ echo c
[ 11.893786] sysrq: Trigger a crash
[ 11.894247] Kernel panic - not syncing: sysrq triggered crash
[ 11.894623] CPU: 7 PID: 333 Comm: sh Kdump: loaded Not tainted 6.0.9-un-def-alt1 #1
[ 11.895076] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-alt1 04/01/2014
[ 11.895599] Call Trace:
[ 11.895758] <TASK>
[ 11.895894] dump_stack_lvl+0x6d/0x9a
[ 11.896122] panic+0x117/0x2d9
[ 11.896313] ? _printk+0x58/0x81
[ 11.896518] sysrq_handle_crash+0x16/0x20
[ 11.896766] __handle_sysrq.cold+0x41/0x126
[ 11.897021] write_sysrq_trigger+0x24/0x50
[ 11.897269] proc_reg_write+0x52/0xa0
[ 11.897502] vfs_write+0xc2/0x3c0
[ 11.897716] ? kmem_cache_free+0x153/0x300
[ 11.897964] ? kvm_sched_clock_read+0x14/0x40
[ 11.898229] ? get_vtime_delta+0x54/0xc0
[ 11.898477] ? ct_kernel_exit.constprop.0+0x71/0x90
[ 11.898781] ksys_write+0x63/0xf0
[ 11.898985] do_syscall_64+0x58/0x90
[ 11.899206] ? kvm_sched_clock_read+0x14/0x40
[ 11.899475] ? get_vtime_delta+0x54/0xc0
[ 11.899719] ? ct_kernel_exit.constprop.0+0x71/0x90
[ 11.900010] ? __ct_user_enter+0x5a/0xd0
[ 11.900247] ? syscall_exit_to_user_mode+0x46/0x50
[ 11.900540] ? do_syscall_64+0x67/0x90
[ 11.900770] ? do_syscall_64+0x67/0x90
[ 11.900998] ? syscall_exit_to_user_mode+0x46/0x50
[ 11.901286] ? do_syscall_64+0x67/0x90
[ 11.901520] ? __ct_user_enter+0x5a/0xd0
[ 11.901765] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 11.902068] RIP: 0033:0x7ffa8b904e13
[ 11.902287] Code: 8b 15 19 50 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 64 8b 04 25 18 00 00 00 85 c0 75 14 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 55 c3 0f 1f 40 00 48 83 ec 28 48 89 54 24 18
[ 11.903388] RSP: 002b:00007ffc8931e5c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 11.903843] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007ffa8b904e13
[ 11.904265] RDX: 0000000000000002 RSI: 0000561b5e1b7100 RDI: 0000000000000001
[ 11.904697] RBP: 0000561b5e1b7100 R08: 0000000000000007 R09: 0000000000000073
[ 11.905119] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
[ 11.905547] R13: 00007ffa8b9fb5a0 R14: 0000000000000002 R15: 00007ffa8b9fb7a0
[ 11.905976] </TASK>
[ 0.000000] Linux version 6.0.9-un-def-alt1 (builder at localhost.localdomain) (gcc-12 (GCC) 12.1.1 20220518 (ALT Sisyphus 12.1.1-alt2), GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT_DYNAMIC Wed Nov 16 14:03:28 UTC 2022
[ 0.000000] Command line: console=ttyS0 mitigations=off nokaslr panic=-1 SCRIPT=/tmp/tmp.BNihuJ8w1Z NOTTY no_timer_check root=UUID=f8e489ac-dc18-48fc-9b39-6b6fdd8406c7 rootfstype=ext4 systemd.unit=kdump-tools-dump.service sysrq=yes panic=9 nokaslr irqpoll reset_devices cgroup_disable=memory udev.children-max=4 transparent_hugepage=never cma=0 hugetlb_cma=0 novmcoredd nr_cpus=1 mce=off numa=off acpi_no_memhotplug nokaslr hest_disable rw acpi_rsdp=0xf0910 elfcorehdr=3128692K
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] signal: max sigframe size: 1440
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000af000000-0x00000000bef5cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000befffc00-0x00000000beffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffdc000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000001000-0x000000000009fbff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000af000000-0x00000000af00000f] usable
[ 0.000000] reserve setup_data: [mem 0x00000000af000010-0x00000000bef5cfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000befffc00-0x00000000beffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000bffdc000-0x00000000bfffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-alt1 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 13929953849 cycles
[ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000003] tsc: Detected 2799.998 MHz processor
[ 0.029238] AGP: No AGP bridge found
[ 0.029496] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[ 0.029536] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.029544] x2apic: enabled by BIOS, switching to x2apic ops
[ 0.029800] found SMP MP-table at [mem 0x000f0950-0x000f095f]
[ 0.029960] RAMDISK: [mem 0xbe6fa000-0xbef4efff]
[ 0.029961] ACPI: Early table checksum verification disabled
[ 0.029963] ACPI: RSDP 0x00000000000F0910 000014 (v00 BOCHS )
[ 0.029966] ACPI: RSDT 0x00000000BFFE1C82 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.029970] ACPI: FACP 0x00000000BFFE1A3E 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.029973] ACPI: DSDT 0x00000000BFFDF8C0 00217E (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.029975] ACPI: FACS 0x00000000BFFDF880 000040
[ 0.029976] ACPI: APIC 0x00000000BFFE1AB2 000170 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.029978] ACPI: HPET 0x00000000BFFE1C22 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.029980] ACPI: WAET 0x00000000BFFE1C5A 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)
[ 0.029982] ACPI: Reserving FACP table memory at [mem 0xbffe1a3e-0xbffe1ab1]
[ 0.029983] ACPI: Reserving DSDT table memory at [mem 0xbffdf8c0-0xbffe1a3d]
[ 0.029983] ACPI: Reserving FACS table memory at [mem 0xbffdf880-0xbffdf8bf]
[ 0.029984] ACPI: Reserving APIC table memory at [mem 0xbffe1ab2-0xbffe1c21]
[ 0.029984] ACPI: Reserving HPET table memory at [mem 0xbffe1c22-0xbffe1c59]
[ 0.029985] ACPI: Reserving WAET table memory at [mem 0xbffe1c5a-0xbffe1c81]
[ 0.029997] Setting APIC routing to cluster x2apic.
[ 0.030006] NUMA turned off
[ 0.030007] Faking a node at [mem 0x0000000000000000-0x00000000beffffff]
[ 0.030012] NODE_DATA(0) allocated [mem 0xbe6d8000-0xbe6f9fff]
[ 0.030033] Zone ranges:
[ 0.030033] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.030035] DMA32 [mem 0x0000000001000000-0x00000000beffffff]
[ 0.030036] Normal empty
[ 0.030036] Movable zone start for each node
[ 0.030039] Early memory node ranges
[ 0.030039] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.030040] node 0: [mem 0x00000000af000000-0x00000000bef5cfff]
[ 0.030041] Initmem setup node 0 [mem 0x0000000000001000-0x00000000bef5cfff]
[ 0.030044] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.030900] On node 0, zone DMA32: 61281 pages in unavailable ranges
[ 0.030931] On node 0, zone DMA32: 4259 pages in unavailable ranges
[ 0.031121] ACPI: PM-Timer IO Port: 0x608
[ 0.031125] APIC: NR_CPUS/possible_cpus limit of 1 almost reached. Keeping one slot for boot cpu. Processor 0/0x0 ignored.
[ 0.031126] APIC: NR_CPUS/possible_cpus limit of 1 almost reached. Keeping one slot for boot cpu. Processor 1/0x1 ignored.
[ 0.031127] APIC: NR_CPUS/possible_cpus limit of 1 almost reached. Keeping one slot for boot cpu. Processor 2/0x2 ignored.
[ 0.031127] APIC: NR_CPUS/possible_cpus limit of 1 almost reached. Keeping one slot for boot cpu. Processor 3/0x3 ignored.
[ 0.031128] APIC: NR_CPUS/possible_cpus limit of 1 almost reached. Keeping one slot for boot cpu. Processor 4/0x4 ignored.
[ 0.031129] APIC: NR_CPUS/possible_cpus limit of 1 almost reached. Keeping one slot for boot cpu. Processor 5/0x5 ignored.
[ 0.031129] APIC: NR_CPUS/possible_cpus limit of 1 almost reached. Keeping one slot for boot cpu. Processor 6/0x6 ignored.
[ 0.031130] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 8/0x8 ignored.
[ 0.031131] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 9/0x9 ignored.
[ 0.031131] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 10/0xa ignored.
[ 0.031132] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 11/0xb ignored.
[ 0.031132] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 12/0xc ignored.
[ 0.031133] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 13/0xd ignored.
[ 0.031134] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 14/0xe ignored.
[ 0.031134] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 15/0xf ignored.
[ 0.031135] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 16/0x10 ignored.
[ 0.031135] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 17/0x11 ignored.
[ 0.031136] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 18/0x12 ignored.
[ 0.031136] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 19/0x13 ignored.
[ 0.031137] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 20/0x14 ignored.
[ 0.031137] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 21/0x15 ignored.
[ 0.031138] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 22/0x16 ignored.
[ 0.031139] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 23/0x17 ignored.
[ 0.031139] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 24/0x18 ignored.
[ 0.031140] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 25/0x19 ignored.
[ 0.031140] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 26/0x1a ignored.
[ 0.031141] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 27/0x1b ignored.
[ 0.031141] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 28/0x1c ignored.
[ 0.031142] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 29/0x1d ignored.
[ 0.031142] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 30/0x1e ignored.
[ 0.031143] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 31/0x1f ignored.
[ 0.031145] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.031180] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.031182] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.031183] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.031184] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.031184] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.031185] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.031188] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.031188] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.031191] smpboot: 32 Processors exceeds NR_CPUS limit of 1
[ 0.031192] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.031205] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.031207] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.031207] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.031208] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.031208] PM: hibernation: Registered nosave memory: [mem 0x00100000-0xaeffffff]
[ 0.031209] PM: hibernation: Registered nosave memory: [mem 0xaf000000-0xaf000fff]
[ 0.031210] PM: hibernation: Registered nosave memory: [mem 0xbef5d000-0xbeffffff]
[ 0.031211] [mem 0x00100000-0xaeffffff] available for PCI devices
[ 0.031212] Booting paravirtualized kernel on KVM
[ 0.031213] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.034723] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
[ 0.034795] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u2097152
[ 0.034821] kvm-guest: PV spinlocks disabled, no host support
[ 0.034822] Fallback order for Node 0: 0
[ 0.034824] Built 1 zonelists, mobility grouping on. Total pages: 64506
[ 0.034825] Policy zone: DMA32
[ 0.034826] Kernel command line: console=ttyS0 mitigations=off nokaslr panic=-1 SCRIPT=/tmp/tmp.BNihuJ8w1Z NOTTY no_timer_check root=UUID=f8e489ac-dc18-48fc-9b39-6b6fdd8406c7 rootfstype=ext4 systemd.unit=kdump-tools-dump.service sysrq=yes panic=9 nokaslr irqpoll reset_devices cgroup_disable=memory udev.children-max=4 transparent_hugepage=never cma=0 hugetlb_cma=0 novmcoredd nr_cpus=1 mce=off numa=off acpi_no_memhotplug nokaslr hest_disable rw acpi_rsdp=0xf0910 elfcorehdr=3128692K
[ 0.034919] Misrouted IRQ fixup and polling support enabled
[ 0.034920] This may significantly impact system performance
[ 0.034971] cgroup: Disabling memory control group subsystem
[ 0.035082] Unknown kernel command line parameters "nokaslr NOTTY nokaslr novmcoredd nokaslr SCRIPT=/tmp/tmp.BNihuJ8w1Z sysrq=yes", will be passed to user space.
[ 0.035099] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.035109] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.035122] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.035123] AGP: Checking aperture...
[ 0.066000] AGP: No AGP bridge found
[ 0.066687] Memory: 202664K/262124K available (14343K kernel code, 2407K rwdata, 9412K rodata, 2988K init, 4536K bss, 59204K reserved, 0K cma-reserved)
[ 0.066746] ftrace: allocating 44066 entries in 173 pages
[ 0.073659] ftrace: allocated 173 pages with 5 groups
[ 0.074082] Dynamic Preempt: voluntary
[ 0.074240] rcu: Preemptible hierarchical RCU implementation.
[ 0.074241] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=1.
[ 0.074242] Trampoline variant of Tasks RCU enabled.
[ 0.074242] Rude variant of Tasks RCU enabled.
[ 0.074243] Tracing variant of Tasks RCU enabled.
[ 0.074243] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.074244] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.077325] NR_IRQS: 524544, nr_irqs: 256, preallocated irqs: 16
[ 0.077493] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.077513] Spurious LAPIC timer interrupt on cpu 0
[ 0.078070] Console: colour *CGA 80x25
[ 0.171561] printk: console [ttyS0] enabled
[ 0.171919] ACPI: Core revision 20220331
[ 0.172348] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.173187] APIC: Switch to symmetric I/O mode setup
[ 0.173833] Switched APIC routing to physical x2apic.
[ 0.174983] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.175535] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c3ee517e, max_idle_ns: 440795257231 ns
[ 0.176451] Calibrating delay loop (skipped) preset value.. 5599.99 BogoMIPS (lpj=2799998)
[ 0.177149] pid_max: default: 32768 minimum: 301
[ 0.177482] LSM: Security Framework initializing
[ 0.177883] landlock: Up and running.
[ 0.178452] Yama: becoming mindful.
[ 0.178756] LSM support for eBPF active
[ 0.179089] AltHa disabled.
[ 0.179453] Kiosk: Netlink family registered.
[ 0.179840] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.180453] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.181503] process: using AMD E400 aware idle routine
[ 0.181941] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127
[ 0.182452] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0
[ 0.198656] Freeing SMP alternatives memory: 40K
[ 0.301130] smpboot: CPU0: AMD QEMU Virtual CPU version 2.5+ (family: 0xf, model: 0x6b, stepping: 0x1)
[ 0.301450] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.301450] cblist_init_generic: Setting shift to 0 and lim to 1.
[ 0.302464] cblist_init_generic: Setting shift to 0 and lim to 1.
[ 0.302984] cblist_init_generic: Setting shift to 0 and lim to 1.
[ 0.303460] Performance Events: AMD PMU driver.
[ 0.303851] ... version: 0
[ 0.304189] ... bit width: 48
[ 0.304450] ... generic registers: 4
[ 0.304789] ... value mask: 0000ffffffffffff
[ 0.305237] ... max period: 00007fffffffffff
[ 0.305450] ... fixed-purpose events: 0
[ 0.305788] ... event mask: 000000000000000f
[ 0.306497] rcu: Hierarchical SRCU implementation.
[ 0.306901] rcu: Max phase no-delay instances is 400.
[ 0.307737] smp: Bringing up secondary CPUs ...
[ 0.308124] smp: Brought up 1 node, 1 CPU
[ 0.308451] smpboot: Max logical packages: 32
[ 0.308818] ----------------
[ 0.309061] | NMI testsuite:
[ 0.309306] --------------------
[ 0.309450] remote IPI: ok |
[ 0.309724] local IPI: ok |
[ 0.310001] --------------------
[ 0.310450] Good, all 2 testcases passed! |
[ 0.310815] ---------------------------------
[ 0.311180] smpboot: Total of 1 processors activated (5599.99 BogoMIPS)
[ 0.311554] devtmpfs: initialized
[ 0.311872] x86/mm: Memory block size: 128MB
[ 0.312748] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.313452] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[ 0.314045] pinctrl core: initialized pinctrl subsystem
[ 0.314922] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.315574] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.316173] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.316462] audit: initializing netlink subsys (disabled)
[ 0.317531] thermal_sys: Registered thermal governor 'fair_share'
[ 0.317532] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.318046] thermal_sys: Registered thermal governor 'step_wise'
[ 0.318451] thermal_sys: Registered thermal governor 'user_space'
[ 0.318953] cpuidle: using governor ladder
[ 0.319794] cpuidle: using governor menu
[ 0.320482] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.321092] PCI: Using configuration type 1 for base access
[ 0.321540] audit: type=2000 audit(1668963493.983:1): state=initialized audit_enabled=0 res=1
[ 0.323116] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.342929] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.343450] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.344361] ACPI: Added _OSI(Module Device)
[ 0.344451] ACPI: Added _OSI(Processor Device)
[ 0.344824] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.345450] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.345928] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.346301] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.346451] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.348003] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.348766] ACPI: Interpreter enabled
[ 0.349084] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.349451] ACPI: Using IOAPIC for interrupt routing
[ 0.349874] HEST: Table parsing disabled.
[ 0.350219] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.350450] PCI: Using E820 reservations for host bridge windows
[ 0.351522] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.354249] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.354453] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.355451] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.356265] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.356622] acpiphp: Slot [2] registered
[ 0.357461] acpiphp: Slot [3] registered
[ 0.357801] acpiphp: Slot [4] registered
[ 0.358141] acpiphp: Slot [5] registered
[ 0.358459] acpiphp: Slot [6] registered
[ 0.358797] acpiphp: Slot [7] registered
[ 0.359462] acpiphp: Slot [8] registered
[ 0.359801] acpiphp: Slot [9] registered
[ 0.360139] acpiphp: Slot [10] registered
[ 0.360460] acpiphp: Slot [11] registered
[ 0.360804] acpiphp: Slot [12] registered
[ 0.361149] acpiphp: Slot [13] registered
[ 0.361460] acpiphp: Slot [14] registered
[ 0.361804] acpiphp: Slot [15] registered
[ 0.362149] acpiphp: Slot [16] registered
[ 0.362459] acpiphp: Slot [17] registered
[ 0.362802] acpiphp: Slot [18] registered
[ 0.363156] acpiphp: Slot [19] registered
[ 0.363459] acpiphp: Slot [20] registered
[ 0.363805] acpiphp: Slot [21] registered
[ 0.364158] acpiphp: Slot [22] registered
[ 0.364459] acpiphp: Slot [23] registered
[ 0.364804] acpiphp: Slot [24] registered
[ 0.365156] acpiphp: Slot [25] registered
[ 0.365459] acpiphp: Slot [26] registered
[ 0.365805] acpiphp: Slot [27] registered
[ 0.366455] acpiphp: Slot [28] registered
[ 0.366801] acpiphp: Slot [29] registered
[ 0.367147] acpiphp: Slot [30] registered
[ 0.367459] acpiphp: Slot [31] registered
[ 0.367802] PCI host bridge to bus 0000:00
[ 0.368146] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.368450] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.369021] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.369450] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.370450] pci_bus 0000:00: root bus resource [mem 0x6ec0000000-0x6f3fffffff window]
[ 0.371103] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.371478] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.372730] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.373562] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.375416] pci 0000:00:01.1: reg 0x20: [io 0xc0e0-0xc0ef]
[ 0.375938] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.376451] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.377450] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.378039] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.378531] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.379523] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.380129] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.380611] pci 0000:00:02.0: [1af4:1009] type 00 class 0x000200
[ 0.381864] pci 0000:00:02.0: reg 0x10: [io 0xc080-0xc0bf]
[ 0.383165] pci 0000:00:02.0: reg 0x14: [mem 0xfebfe000-0xfebfefff]
[ 0.385987] pci 0000:00:02.0: reg 0x20: [mem 0xfebf0000-0xfebf3fff 64bit pref]
[ 0.387768] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00
[ 0.388632] pci 0000:00:03.0: reg 0x10: [io 0xc0c0-0xc0df]
[ 0.390688] pci 0000:00:03.0: reg 0x20: [mem 0xfebf4000-0xfebf7fff 64bit pref]
[ 0.392244] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.394451] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f]
[ 0.396451] pci 0000:00:04.0: reg 0x14: [mem 0xfebff000-0xfebfffff]
[ 0.401451] pci 0000:00:04.0: reg 0x20: [mem 0xfebf8000-0xfebfbfff 64bit pref]
[ 0.409000] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.409451] ACPI: PCI: Interrupt link LNKA disabled
[ 0.409923] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.410513] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.411064] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.411486] ACPI: PCI: Interrupt link LNKS configured for IRQ 9
[ 0.412020] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 32/0x0 ignored.
[ 0.412451] ACPI: Unable to map lapic to logical cpu number
[ 0.412957] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 33/0x1 ignored.
[ 0.413452] ACPI: Unable to map lapic to logical cpu number
[ 0.414486] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 34/0x2 ignored.
[ 0.415128] ACPI: Unable to map lapic to logical cpu number
[ 0.415491] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 35/0x3 ignored.
[ 0.416167] ACPI: Unable to map lapic to logical cpu number
[ 0.416498] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 36/0x4 ignored.
[ 0.417451] ACPI: Unable to map lapic to logical cpu number
[ 0.417951] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 37/0x5 ignored.
[ 0.418451] ACPI: Unable to map lapic to logical cpu number
[ 0.418947] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 38/0x6 ignored.
[ 0.419451] ACPI: Unable to map lapic to logical cpu number
[ 0.419976] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 39/0x8 ignored.
[ 0.420451] ACPI: Unable to map lapic to logical cpu number
[ 0.421473] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 40/0x9 ignored.
[ 0.422116] ACPI: Unable to map lapic to logical cpu number
[ 0.422493] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 41/0xa ignored.
[ 0.423134] ACPI: Unable to map lapic to logical cpu number
[ 0.423493] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 42/0xb ignored.
[ 0.424136] ACPI: Unable to map lapic to logical cpu number
[ 0.424490] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 43/0xc ignored.
[ 0.425451] ACPI: Unable to map lapic to logical cpu number
[ 0.425953] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 44/0xd ignored.
[ 0.426451] ACPI: Unable to map lapic to logical cpu number
[ 0.426951] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 45/0xe ignored.
[ 0.427451] ACPI: Unable to map lapic to logical cpu number
[ 0.427954] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 46/0xf ignored.
[ 0.428451] ACPI: Unable to map lapic to logical cpu number
[ 0.429493] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 47/0x10 ignored.
[ 0.430140] ACPI: Unable to map lapic to logical cpu number
[ 0.430493] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 48/0x11 ignored.
[ 0.431146] ACPI: Unable to map lapic to logical cpu number
[ 0.431490] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 49/0x12 ignored.
[ 0.432451] ACPI: Unable to map lapic to logical cpu number
[ 0.432950] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 50/0x13 ignored.
[ 0.433451] ACPI: Unable to map lapic to logical cpu number
[ 0.433951] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 51/0x14 ignored.
[ 0.434451] ACPI: Unable to map lapic to logical cpu number
[ 0.434954] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 52/0x15 ignored.
[ 0.435451] ACPI: Unable to map lapic to logical cpu number
[ 0.436470] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 53/0x16 ignored.
[ 0.437120] ACPI: Unable to map lapic to logical cpu number
[ 0.437490] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 54/0x17 ignored.
[ 0.438139] ACPI: Unable to map lapic to logical cpu number
[ 0.438493] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 55/0x18 ignored.
[ 0.439146] ACPI: Unable to map lapic to logical cpu number
[ 0.439494] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 56/0x19 ignored.
[ 0.440451] ACPI: Unable to map lapic to logical cpu number
[ 0.440949] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 57/0x1a ignored.
[ 0.441451] ACPI: Unable to map lapic to logical cpu number
[ 0.441952] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 58/0x1b ignored.
[ 0.442451] ACPI: Unable to map lapic to logical cpu number
[ 0.442955] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 59/0x1c ignored.
[ 0.443450] ACPI: Unable to map lapic to logical cpu number
[ 0.444492] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 60/0x1d ignored.
[ 0.445139] ACPI: Unable to map lapic to logical cpu number
[ 0.445494] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 61/0x1e ignored.
[ 0.446149] ACPI: Unable to map lapic to logical cpu number
[ 0.446493] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 62/0x1f ignored.
[ 0.447451] ACPI: Unable to map lapic to logical cpu number
[ 0.447986] iommu: Default domain type: Translated
[ 0.448451] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.448988] ACPI: bus type USB registered
[ 0.449335] usbcore: registered new interface driver usbfs
[ 0.449458] usbcore: registered new interface driver hub
[ 0.449906] usbcore: registered new device driver usb
[ 0.450462] pps_core: LinuxPPS API ver. 1 registered
[ 0.450870] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 0.451452] PTP clock support registered
[ 0.451930] NetLabel: Initializing
[ 0.452451] NetLabel: domain hash size = 128
[ 0.452811] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.453461] NetLabel: unlabeled traffic allowed by default
[ 0.453919] PCI: Using ACPI for IRQ routing
[ 0.454354] vgaarb: loaded
[ 0.454557] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.455036] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.455450] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.458463] clocksource: Switched to clocksource kvm-clock
[ 0.463158] VFS: Disk quotas dquot_6.6.0
[ 0.463696] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.464352] pnp: PnP ACPI init
[ 0.464841] pnp: PnP ACPI: found 5 devices
[ 0.470408] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.471186] NET: Registered PF_INET protocol family
[ 0.471620] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.472340] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.473038] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.473677] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.474311] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.475052] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.475607] MPTCP token hash table entries: 256 (order: 0, 6144 bytes, linear)
[ 0.476204] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.476753] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.477347] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.477829] NET: Registered PF_XDP protocol family
[ 0.478224] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.478739] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.479243] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.479809] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 0.480368] pci_bus 0000:00: resource 8 [mem 0x6ec0000000-0x6f3fffffff window]
[ 0.480981] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.481500] PCI: CLS 0 bytes, default 64
[ 0.481848] Trying to unpack rootfs image as initramfs...
[ 0.485720] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c3ee517e, max_idle_ns: 440795257231 ns
[ 0.488652] Initialise system trusted keyrings
[ 0.489617] workingset: timestamp_bits=36 max_order=16 bucket_order=0
[ 0.490157] zbud: loaded
[ 0.507523] Key type asymmetric registered
[ 0.507876] Asymmetric key parser 'x509' registered
[ 0.508289] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.511514] io scheduler mq-deadline registered
[ 0.511906] io scheduler bfq registered
[ 0.513751] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.514176] crc32: self tests passed, processed 225944 bytes in 112580 nsec
[ 0.514872] crc32c: CRC_LE_BITS = 64
[ 0.515169] crc32c: self tests passed, processed 112972 bytes in 56380 nsec
[ 0.531029] crc32_combine: 8373 self tests passed
[ 0.549736] crc32c_combine: 8373 self tests passed
[ 0.555488] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.578390] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.600759] Linux agpgart interface v0.103
[ 0.601135] ACPI: bus type drm_connector registered
[ 0.604753] brd: module loaded
[ 0.607509] loop: module loaded
[ 0.611566] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.612699] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.613119] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.613610] mousedev: PS/2 mouse device common for all mice
[ 0.614219] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.615081] rtc_cmos 00:04: RTC can wake from S4
[ 0.615762] rtc_cmos 00:04: registered as rtc0
[ 0.616172] rtc_cmos 00:04: setting system clock to 2022-11-20T16:58:13 UTC (1668963493)
[ 0.616870] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 0.619489] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.635745] NET: Registered PF_INET6 protocol family
[ 0.639627] Segment Routing with IPv6
[ 0.639946] RPL Segment Routing with IPv6
[ 0.640288] In-situ OAM (IOAM) with IPv6
[ 0.644506] mce: Unable to init MCE device (rc: -5)
[ 0.645014] IPI shorthand broadcast: enabled
[ 0.645388] sched_clock: Marking stable (548501518, 95951481)->(645562181, -1109182)
[ 0.646093] registered taskstats version 1
[ 0.646443] Loading compiled-in X.509 certificates
[ 0.650003] Loaded X.509 cert 'Build time autogenerated kernel key: f9407c903947d2182e75f02ae0cc069def0b3a86'
[ 0.652634] Freeing initrd memory: 8532K
[ 0.653091] zswap: loaded using pool zstd/zbud
[ 0.653547] Key type .fscrypt registered
[ 0.653886] Key type fscrypt-provisioning registered
[ 0.655688] Key type encrypted registered
[ 0.656044] ima: No TPM chip found, activating TPM-bypass!
[ 0.656515] ima: Allocated hash algorithm: sha512
[ 0.656924] ima: No architecture policies found
[ 0.657313] evm: Initialising EVM extended attributes:
[ 0.657751] evm: security.selinux
[ 0.658031] evm: security.SMACK64
[ 0.658310] evm: security.SMACK64EXEC
[ 0.658622] evm: security.SMACK64TRANSMUTE
[ 0.658965] evm: security.SMACK64MMAP
[ 0.659272] evm: security.apparmor
[ 0.659560] evm: security.ima
[ 0.659814] evm: security.capability
[ 0.660115] evm: HMAC attrs: 0x1
[ 0.662227] Freeing unused decrypted memory: 2036K
[ 0.662878] Freeing unused kernel image (initmem) memory: 2988K
[ 0.664498] Write protecting the kernel read-only data: 26624k
[ 0.665159] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 0.665808] Freeing unused kernel image (rodata/data gap) memory: 828K
[ 0.666197] rodata_test: all tests were successful
[ 0.666493] Run /init as init process
[ 0.696026] INITRAMFS: version 2.32.0
[ 0.702198] INIT: Entering runlevel: 3
[ 0.709181] Parsing cmdline arguments: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 0.870178] Creating /etc/fstab: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 0.888913] Mounting filesystem [/dev]: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 0.903497] Mounting filesystem [/sys]: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 0.928528] Mounting filesystem [/run]: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 0.963290] Setting kernel runtime parameters: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 0.982809] Loading modules: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 1.002156] Starting ueventd service: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 1.043399] Starting udevd service: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 1.121872] Starting polld service: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 1.710564] Network up (lo): [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 1.845766] INIT: Entering runlevel: 2
[ 1.854032] Stopping polld service: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 2.984599] Stopping udevd service: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 3.109830] Stopping ueventd service: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 3.234744] Moving filesystem [/dev]: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 3.260358] Moving filesystem [/run]: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 3.290966] Unmounting filesystem [/sys]: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 3.326897] Asking all remaining processes to terminate: [72G[ [1m[32mDONE[39;49m[0;10m ]
[ 3.349585] INIT: Running init (/sbin/init)
Welcome to [1;33mALT Sisyphus Sisyphus[0m!
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/modprobe[0m.
[[0;32m OK [0m] Started [0;1;39mDispatch Password …ts to Console Directory Watch[0m.
[[0;32m OK [0m] Set up automount [0;1;39mArbitrary…s File System Automount Point[0m.
[[0;32m OK [0m] Reached target [0;1;39mLocal Encrypted Volumes[0m.
[[0;32m OK [0m] Reached target [0;1;39mLocal Integrity Protected Volumes[0m.
[[0;32m OK [0m] Reached target [0;1;39mNetwork is Online[0m.
[[0;32m OK [0m] Reached target [0;1;39mSwaps[0m.
[[0;32m OK [0m] Reached target [0;1;39mLocal Verity Protected Volumes[0m.
[[0;32m OK [0m] Listening on [0;1;39mJournal Audit Socket[0m.
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m.
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m.
[[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m.
[[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m.
Mounting [0;1;39mHuge Pages File System[0m...
Mounting [0;1;39mPOSIX Message Queue File System[0m...
Mounting [0;1;39mKernel Debug File System[0m...
Mounting [0;1;39mKernel Trace File System[0m...
Starting [0;1;39mCreate List of Static Device Nodes[0m...
Starting [0;1;39mLoad Kernel Module configfs[0m...
Starting [0;1;39mLoad Kernel Module efi_pstore[0m...
Starting [0;1;39mLoad Kernel Module fuse[0m...
Starting [0;1;39mJournal Service[0m...
Starting [0;1;39mLoad Kernel Modules[0m...
Starting [0;1;39mRemount Root and Kernel File Systems[0m...
Starting [0;1;39mColdplug All udev Devices[0m...
[[0;32m OK [0m] Mounted [0;1;39mHuge Pages File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mKernel Trace File System[0m.
[[0;32m OK [0m] Finished [0;1;39mCreate List of Static Device Nodes[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module efi_pstore[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Modules[0m.
[[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m.
[[0;32m OK [0m] Started [0;1;39mJournal Service[0m.
Mounting [0;1;39mFUSE Control File System[0m...
Mounting [0;1;39mKernel Configuration File System[0m...
Starting [0;1;39mRebuild Hardware Database[0m...
Starting [0;1;39mFlush Journal to Persistent Storage[0m...
Starting [0;1;39mLoad/Save Random Seed[0m...
Starting [0;1;39mApply Kernel Variables[0m...
Starting [0;1;39mCreate Static Device Nodes in /dev[0m...
[[0;32m OK [0m] Mounted [0;1;39mFUSE Control File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m.
[[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m.
[[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m.
[[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m.
[[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m.
[[0;32m OK [0m] Reached target [0;1;39mPreparation for Local File Systems[0m.
Mounting [0;1;39m/tmp[0m...
Mounting [0;1;39mLock Directory[0m...
Mounting [0;1;39mRuntime Directory[0m...
[[0;32m OK [0m] Mounted [0;1;39m/tmp[0m.
[[0;32m OK [0m] Mounted [0;1;39mLock Directory[0m.
[[0;32m OK [0m] Mounted [0;1;39mRuntime Directory[0m.
[[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m.
Starting [0;1;39mRebuild Dynamic Linker Cache[0m...
Starting [0;1;39mAutomatic Boot Loader Update[0m...
Starting [0;1;39mCreate Volatile Files and Directories[0m...
[[0;32m OK [0m] Finished [0;1;39mAutomatic Boot Loader Update[0m.
[[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m.
Starting [0;1;39mRebuild Journal Catalog[0m...
Starting [0;1;39mRecord System Boot/Shutdown in UTMP[0m...
[[0;32m OK [0m] Finished [0;1;39mRebuild Dynamic Linker Cache[0m.
[[0;32m OK [0m] Finished [0;1;39mRecord System Boot/Shutdown in UTMP[0m.
[[0;32m OK [0m] Finished [0;1;39mRebuild Journal Catalog[0m.
[[0;32m OK [0m] Finished [0;1;39mRebuild Hardware Database[0m.
Starting [0;1;39mRule-based Manage…for Device Events and Files[0m...
Starting [0;1;39mUpdate is Completed[0m...
[[0;32m OK [0m] Finished [0;1;39mUpdate is Completed[0m.
[[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m.
[[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m.
Starting [0;1;39mLinux kdump vmcore capture service[0m...
[ 3.873387] kdump-config[961]: running makedumpfile --dump-dmesg /proc/vmcore /var/crash/202211201658/dmesg.202211201658.
[ 3.881869] kdump-config[977]: The kernel version is not supported.
[ 3.882483] kdump-config[977]: The makedumpfile operation may be incomplete.
[ 3.883157] kdump-config[977]: The dmesg log is saved to /var/crash/202211201658/dmesg.202211201658.
[ 3.884347] kdump-config[977]: makedumpfile Completed.
[ 3.890751] kdump-config[978]: kdump-config: saved dmesg content in /var/crash/202211201658 [ DONE ]
[ 3.894611] kdump-config[961]: running makedumpfile -F -c -d 31 /proc/vmcore | compress > /var/crash/202211201658/dump-incomplete.
[ 3.899737] kdump-config[983]: The kernel version is not supported.
[ 3.900388] kdump-config[983]: The makedumpfile operation may be incomplete.
[ 35.180367] kdump-config[983]:
Checking for memory holes : [ 0.0 %] /
Checking for memory holes : [100.0 %] |
Excluding unnecessary pages : [ 4.8 %] \
Excluding unnecessary pages : [100.0 %] -
Checking for memory holes : [100.0 %] /
Excluding unnecessary pages : [100.0 %] |
Checking for memory holes : [100.0 %] \
Excluding unnecessary pages : [ 76.7 %] -
Excluding unnecessary pages : [100.0 %] /
Checking for memory holes : [100.0 %] |
Excluding unnecessary pages : [100.0 %] \
Checking for memory holes : [100.0 %] -
Checking for memory holes : [100.0 %] /
Checking for memory holes : [100.0 %] |
Checking for memory holes : [100.0 %] \
Checking for memory holes : [100.0 %] -
Excluding unnecessary pages : [100.0 %] /
Copying data : [ 0.1 %] | eta: 5m23s
Copying data : [ 2.1 %] \ eta: 61s
Copying data : [ 4.4 %] - eta: 50s
Copying data : [ 5.3 %] / eta: 59s
Checking for memory holes : [100.0 %] |
Excluding unnecessary pages : [ 53.2 %] \
Excluding unnecessary pages : [100.0 %] -
Checking for memory holes : [100.0 %] /
Excluding unnecessary pages : [100.0 %] |
Checking for memory holes : [100.0 %] \
Excluding unnecessary pages : [100.0 %] -
Copying data : [ 8.5 %] / eta: 3s
Copying data : [ 10.8 %] | eta: 10s
Copying data : [ 13.1 %] \ eta: 15s
Copying data : [ 15.5 %] - eta: 18s
Copying data : [ 17.8 %] / eta: 20s
Copying data : [ 20.2 %] | eta: 21s
Copying data : [ 22.5 %] \ eta: 21s
Copying data : [ 24.9 %] - eta: 22s
Copying data : [ 27.2 %] / eta: 22s
Copying data : [ 29.6 %] | eta: 22s
Copying data : [ 31.9 %] \ eta: 22s
Copying data : [ 34.3 %] - eta: 21s
Copying data : [ 36.6 %] / eta: 21s
Copying data : [ 39.0 %] | eta: 21s
Copying data : [ 41.3 %] \ eta: 20s
Copying data : [ 43.7 %] - eta: 19s
Copying data : [ 46.0 %] / eta: 19s
Copying data : [ 48.3 %] | eta: 18s
Copying data : [ 50.7 %] \ eta: 18s
Copying data : [ 53.0 %] - eta: 17s
Copying data : [ 55.4 %] / eta: 16s
Copying data : [ 57.7 %] | eta: 15s
Copying data : [ 60.1 %] \ eta: 15s
Copying data : [ 62.4 %] - eta: 14s
Copying data : [ 64.8 %] / eta: 13s
[ 35.214530] kdump-config[985]: cat: write error: No space left on device
[ 35.215201] kdump-config[983]: Can't write the dump file(STDOUT). Broken pipe
[ 35.216199] kdump-config[983]: Can't write the dump file(STDOUT). Broken pipe
[ 35.217151] kdump-config[983]: makedumpfile Failed.
[ 35.217893] kdump-config[998]: kdump-config: makedumpfile failed, falling back to 'cp' [FAILED]
[ 35.220756] kdump-config[1002]: cp: error writing '/var/crash/202211201658/vmcore-incomplete': No space left on device
[ 35.223702] kdump-config[1003]: kdump-config: failed to save vmcore in /var/crash/202211201658 [FAILED]
[[0;1;31mFAILED[0m] Failed to start [0;1;39mLinux kdump vmcore capture service[0m.
See 'systemctl status kdump-tools-dump.service' for details.
[ 35.359215] reboot: Restarting system
Error: no exit code is found, failure.
+ :
+ vm-run --rootfs=i --kvm=cond '
set -xe
ls -l /var/crash/*/dmesg.*
ls -l /var/crash/*/dump.*
'
+ qemu-system-x86_64 -enable-kvm -m 451302M -smp cores=32 -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -serial mon:stdio -kernel /boot/vmlinuz-6.0.9-un-def-alt1 -initrd /tmp/initramfs-6.0.9-un-def-alt1.img -sandbox on,spawn=deny -bios bios.bin -drive file=i,format=raw,if=virtio -append 'console=ttyS0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/tmp.fM097RXr2y NOTTY no_timer_check root=UUID=f8e489ac-dc18-48fc-9b39-6b6fdd8406c7 rootfstype=ext4'
++ ls -l /var/crash/202211201658/dmesg.202211201658
-rw------- 1 root root 29324 Nov 20 16:58 /var/crash/202211201658/dmesg.202211201658
++ ls -l '/var/crash/*/dump.*'
ls: cannot access '/var/crash/*/dump.*': No such file or directory
error: %post(kdump-tools-checkinstall-1.8-alt1.noarch) scriptlet failed, exit status 2
error: kdump-tools-checkinstall-1.8-alt1.noarch: install failed
hsh-install: Packages installation failed.
2022-Nov-20 16:58:52 :: [x86_64] #100 kdump-tools-checkinstall: install check FAILED
ppc64le: kdump-tools-checkinstall=1.8-alt1 post-install unowned files:
/run/blkid
/run/blkid/blkid.tab
/run/blkid/blkid.tab.old
/tmp/i
/tmp/initramfs-6.0.9-un-def-alt1.img
/tmp/tmp.J1SfzMWNyA
/tmp/tmp.J1SfzMWNyA.ret
/tmp/tmp.dBHVeLvdZz
2022-Nov-20 16:59:05 :: [ppc64le] #100 kdump-tools-checkinstall: install check OK
armh: kdump-tools-checkinstall=1.8-alt1 install failed:
<13>Nov 20 16:58:38 rpmi: kdump-tools-checkinstall-1.8-alt1 sisyphus+310345.100.1.1 1668963300 installed
+ cd /tmp
+ sed -i -e /#KDUMP_CMDLINE_REMOVE/s/#// -e '/^KDUMP_CMDLINE_REMOVE/s/"$/ quiet"/' -e /#KDUMP_CMDLINE_APPEND/s/#// -e '/^KDUMP_CMDLINE_APPEND/s/"$/ rw"/' /etc/sysconfig/kdump-tools
+ timeout 300 vm-run --create-rootfs=i --kvm=cond --append=crashkernel=256M '
set -xe
make-initrd
kdump-config show
kdump-config load
kdump-config test
sleep 1
echo 1 >/proc/sys/kernel/sysrq
echo c >/proc/sysrq-trigger
'
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
Creating regular file i
find: '/.out': Permission denied
find: '/.host': Permission denied
i: clean, 14443/100464 files, 168799/401266 blocks
+ qemu-system-aarch64-bundle -enable-kvm -m 3072M -smp cores=6 -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -serial mon:stdio -kernel /boot/vmlinuz-6.0.9-un-def-alt1 -initrd /tmp/initramfs-6.0.9-un-def-alt1.img -sandbox on,spawn=deny -M virt,highmem=off -cpu host,aarch64=off -drive file=i,format=raw,if=virtio -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/tmp.zLvroKZrv7 crashkernel=256M NOTTY watchdog_thresh=60 root=UUID=61bc54f3-6b78-4685-9080-d4bcd03df071 rootfstype=ext4'
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
++ make-initrd
[00:00:00] Config file: /etc/initrd.mk
[00:00:01] Generating module dependencies on host ...
[00:00:14] Used features: add-modules add-udev-rules cleanup compress depmod-image network qemu rdshell rootfs system-glibc
[00:00:14] Packed modules: 8139cp 8390 9pnet 9pnet_virtio af_packet ahci ata_generic ata_piix bluetooth cdrom crypto_engine e100 e1000 e1000e ecdh_generic failover fuse gpio-virtio hid hid-generic i2c-virtio libahci libata mii ne2k-pci net_failover pcnet32 rfkill rng-core rpmsg_core rpmsg_ns scsi_common scsi_mod snd snd-pcm snd-timer soundcore sr_mod uio uio_pdrv_genirq vdpa virtio virtio-rng virtio_balloon virtio_blk virtio_bt virtio_console virtio_crypto virtio_dma_buf virtio_input virtio_mmio virtio_net virtio_pci virtio_pci_legacy_dev virtio_pci_modern_dev virtio_ring virtio_rpmsg_bus virtio_scsi virtio_snd virtio_vdpa virtiofs vmw_vsock_virtio_transport vmw_vsock_virtio_transport_common vp_vdpa vsock
[00:00:14] Unpacked size: 22M
[00:00:14] Image size: 6.6M
[00:00:14] Image is saved as /boot/initrd-6.0.9-un-def-alt1.img
++ kdump-config show
DUMP_MODE: kdump
USE_KDUMP: 1
KDUMP_COREDIR: /var/crash
crashkernel addr: 0x58000000
kdump initrd:
current state: Not ready to kdump
kexec command:
no kexec command recorded
++ kdump-config load
/usr/sbin/kdump-config: line 541: file: command not found
No kernel specified
kexec-tools 2.0.25
Usage: kexec [OPTION]... [kernel]
Directly reboot into a new kernel
-h, --help Print this help.
-v, --version Print the version of kexec.
-f, --force Force an immediate kexec,
don't call shutdown.
-i, --no-checks Fast reboot, no memory integrity checks.
-x, --no-ifdown Don't bring down network interfaces.
-y, --no-sync Don't sync filesystems before kexec.
-l, --load Load the new kernel into the
current kernel.
-p, --load-panic Load the new kernel for use on panic.
-u, --unload Unload the current kexec target kernel.
If capture kernel is being unloaded
specify -p with -u.
-e, --exec Execute a currently loaded kernel.
--exec-live-update Execute a currently loaded xen image after
storing the state required to live update.
-t, --type=TYPE Specify the new kernel is of this type.
--mem-min=<addr> Specify the lowest memory address to
load code into.
--mem-max=<addr> Specify the highest memory address to
load code into.
--reuseinitrd Reuse initrd from first boot.
--print-ckr-size Print crash kernel region size.
--load-preserve-context Load the new kernel and preserve
context of current kernel during kexec.
--load-jump-back-helper Load a helper image to jump back
to original kernel.
--load-live-update Load the new kernel to overwrite the
running kernel.
--entry=<addr> Specify jump back address.
(0 means it's not jump back or
preserve context)
to original kernel.
-s, --kexec-file-syscall Use file based syscall for kexec operation
-c, --kexec-syscall Use the kexec_load syscall for for compatibility
with systems that don't support -s (default)
-a, --kexec-syscall-auto Use file based syscall for kexec and fall
back to the compatibility syscall when file based
syscall is not supported or the kernel did not
understand the image
-d, --debug Enable debugging to help spot a failure.
-S, --status Return 1 if the type (by default crash) is loaded,
0 if not.
Supported kernel file types and options:
uImage
--command-line=STRING Set the kernel command line to STRING.
--append=STRING Set the kernel command line to STRING.
--initrd=FILE Use FILE as the kernel's initial ramdisk.
--ramdisk=FILE Use FILE as the kernel's initial ramdisk.
--dtb=FILE Use FILE as the fdt blob.
--atags Use ATAGs instead of device-tree.
--page-offset=PAGE_OFFSET
Set PAGE_OFFSET of crash dump vmcore
zImage
--command-line=STRING Set the kernel command line to STRING.
--append=STRING Set the kernel command line to STRING.
--initrd=FILE Use FILE as the kernel's initial ramdisk.
--ramdisk=FILE Use FILE as the kernel's initial ramdisk.
--dtb=FILE Use FILE as the fdt blob.
--atags Use ATAGs instead of device-tree.
--page-offset=PAGE_OFFSET
Set PAGE_OFFSET of crash dump vmcore
Architecture options:
--image-size=<size>
Specify the assumed total image size of
the kernel that is about to be loaded,
including the .bss section, as reported
by 'arm-linux-size vmlinux'. If not
specified, this value is implicitly set
to the compressed images size * 4.
--dt-no-old-root
do not reuse old kernel root= param.
while creating flatten device tree.
failed to load kdump kernel [FAILED]
+ :
+ vm-run --rootfs=i --kvm=cond '
set -xe
ls -l /var/crash/*/dmesg.*
ls -l /var/crash/*/dump.*
'
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
+ qemu-system-aarch64-bundle -enable-kvm -m 3072M -smp cores=6 -nodefaults -nographic -no-reboot -fsdev local,id=root,path=/,security_model=none,multidevs=remap -device virtio-9p-pci,fsdev=root,mount_tag=virtio-9p:/ -device virtio-rng-pci -serial mon:stdio -kernel /boot/vmlinuz-6.0.9-un-def-alt1 -initrd /tmp/initramfs-6.0.9-un-def-alt1.img -sandbox on,spawn=deny -M virt,highmem=off -cpu host,aarch64=off -drive file=i,format=raw,if=virtio -append 'console=ttyAMA0 mitigations=off nokaslr quiet panic=-1 SCRIPT=/tmp/tmp.ZUMJS1w9WJ NOTTY watchdog_thresh=60 root=UUID=61bc54f3-6b78-4685-9080-d4bcd03df071 rootfstype=ext4'
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored.
++ ls -l '/var/crash/*/dmesg.*'
ls: cannot access '/var/crash/*/dmesg.*': No such file or directory
error: %post(kdump-tools-checkinstall-1.8-alt1.noarch) scriptlet failed, exit status 2
error: kdump-tools-checkinstall-1.8-alt1.noarch: install failed
hsh-install: Packages installation failed.
2022-Nov-20 16:59:09 :: [armh] #100 kdump-tools-checkinstall: install check FAILED
2022-Nov-20 16:58:11 :: [i586] install check FAILED
2022-Nov-20 16:58:30 :: [aarch64] install check FAILED
2022-Nov-20 16:58:53 :: [x86_64] install check FAILED
2022-Nov-20 16:59:10 :: [armh] install check FAILED
2022-Nov-20 16:59:10 :: task #310345 for sisyphus FAILED
More information about the Sisyphus-incominger
mailing list