[#274506] p9 FAILED (try 3) mesaflash.git=3.4.0-alt1.20210527 rastercarve.git=1.0.8-alt1
Girar awaiter (antohami)
girar-builder at altlinux.org
Mon Jun 14 17:29:56 MSK 2021
http://git.altlinux.org/tasks/274506/logs/events.3.1.log
subtask name aarch64 armh i586 ppc64le x86_64
#200 rastercarve failed - failed failed failed
2021-Jun-14 14:29:00 :: task #274506 for p9 resumed by antohami:
2021-Jun-14 14:29:00 :: message: for_linuxcnc
#100 build 3.4.0-alt1.20210527 from /gears/m/mesaflash.git fetched at 2021-Jun-13 14:52:11
#200 build 1.0.8-alt1 from /gears/r/rastercarve.git fetched at 2021-Jun-14 14:28:37
2021-Jun-14 14:29:01 :: created build repo
2021-Jun-14 14:29:01 :: [armh] #100 mesaflash.git 3.4.0-alt1.20210527: build start
2021-Jun-14 14:29:01 :: [i586] #100 mesaflash.git 3.4.0-alt1.20210527: build start
2021-Jun-14 14:29:01 :: [x86_64] #100 mesaflash.git 3.4.0-alt1.20210527: build start
2021-Jun-14 14:29:01 :: [ppc64le] #100 mesaflash.git 3.4.0-alt1.20210527: build start
2021-Jun-14 14:29:01 :: [aarch64] #100 mesaflash.git 3.4.0-alt1.20210527: build start
2021-Jun-14 14:29:19 :: [i586] #100 mesaflash.git 3.4.0-alt1.20210527: build OK (cached)
2021-Jun-14 14:29:19 :: [i586] #200 rastercarve.git 1.0.8-alt1: build start
2021-Jun-14 14:29:20 :: [x86_64] #100 mesaflash.git 3.4.0-alt1.20210527: build OK (cached)
2021-Jun-14 14:29:20 :: [x86_64] #200 rastercarve.git 1.0.8-alt1: build start
2021-Jun-14 14:29:23 :: [aarch64] #100 mesaflash.git 3.4.0-alt1.20210527: build OK (cached)
2021-Jun-14 14:29:23 :: [aarch64] #200 rastercarve.git 1.0.8-alt1: build start
2021-Jun-14 14:29:27 :: [ppc64le] #100 mesaflash.git 3.4.0-alt1.20210527: build SKIPPED
2021-Jun-14 14:29:27 :: [ppc64le] #200 rastercarve.git 1.0.8-alt1: build start
2021-Jun-14 14:29:30 :: [armh] #100 mesaflash.git 3.4.0-alt1.20210527: build SKIPPED
2021-Jun-14 14:29:30 :: [armh] #200 rastercarve.git 1.0.8-alt1: build start
[i586] <13>Jun 14 14:29:32 rpmi: libgdbm-1.8.3-alt10 1454943334 installed
[i586] <13>Jun 14 14:29:32 rpmi: libexpat-2.2.10-alt1 p9+261554.100.1.1 1605103337 installed
[i586] <13>Jun 14 14:29:32 rpmi: libp11-kit-0.23.15-alt2 p9+254920.2400.19.1 1601385903 installed
[i586] <13>Jun 14 14:29:32 rpmi: libtasn1-4.14-alt1 p9+235792.100.2.1 1565425233 installed
[i586] <13>Jun 14 14:29:32 rpmi: rpm-macros-alternatives-0.5.1-alt1 sisyphus+226946.100.1.1 1554830426 installed
[i586] <13>Jun 14 14:29:32 rpmi: alternatives-0.5.1-alt1 sisyphus+226946.100.1.1 1554830426 installed
[i586] <13>Jun 14 14:29:32 rpmi: ca-certificates-2020.06.29-alt1 p9+258899.100.3.1 1601998604 installed
[i586] <13>Jun 14 14:29:32 rpmi: ca-trust-0.1.2-alt1 p9+233349.100.1.1 1561655062 installed
[i586] <13>Jun 14 14:29:32 rpmi: p11-kit-trust-0.23.15-alt2 p9+254920.2400.19.1 1601385903 installed
[i586] <13>Jun 14 14:29:32 rpmi: libcrypto1.1-1.1.1k-alt1 p9+268376.100.3.1 1616721011 installed
[i586] <13>Jun 14 14:29:32 rpmi: libssl1.1-1.1.1k-alt1 p9+268376.100.3.1 1616721011 installed
[i586] <13>Jun 14 14:29:32 rpmi: python3-3.7.4-alt3 p9+249932.100.2.1 1587127349 installed
[i586] <13>Jun 14 14:29:33 rpmi: libpython3-3.7.4-alt3 p9+249932.100.2.1 1587127349 installed
[i586] <13>Jun 14 14:29:33 rpmi: python3-base-3.7.4-alt3 p9+249932.100.2.1 1587127349 installed
[i586] <13>Jun 14 14:29:33 rpmi: tests-for-installed-python3-pkgs-0.1.13.1-alt2 1535450458 installed
[i586] <13>Jun 14 14:29:33 rpmi: rpm-build-python3-0.1.13.1-alt2 1535450458 installed
[i586] Reading Package Lists...
[i586] Building Dependency Tree...
[i586] MI2a: mark python3-dev
[i586] MI2a: target libncurses-devel
[i586] MI2a: mark libncurses-devel
[i586] MI2a: target libtinfo-devel
[i586] MI2a: mark libtinfo-devel
[i586] MI2a: mark python3-module-setuptools
[i586] MI2a: target python3-module-pkg_resources
[i586] MI2a: mark python3-module-pkg_resources
[i586] rpm-build-python3 is already the newest version.
[i586] E: Couldn't find package python3-module-opencv
[i586] hsh-install: Failed to calculate package file list.
[i586] hsh-install: Failed to generate package file list.
2021-Jun-14 14:29:34 :: [i586] rastercarve.git 1.0.8-alt1: remote: cannot build src.rpm
2021-Jun-14 14:29:34 :: [i586] #200 rastercarve.git 1.0.8-alt1: build FAILED
2021-Jun-14 14:29:35 :: [i586] requesting cancellation of task processing
[x86_64] <13>Jun 14 14:29:34 rpmi: libgdbm-1.8.3-alt10 1454943313 installed
[x86_64] <13>Jun 14 14:29:34 rpmi: libexpat-2.2.10-alt1 p9+261554.100.1.1 1605103332 installed
[x86_64] <13>Jun 14 14:29:34 rpmi: libp11-kit-0.23.15-alt2 p9+254920.2400.19.1 1601385869 installed
[x86_64] <13>Jun 14 14:29:34 rpmi: libtasn1-4.14-alt1 p9+235792.100.2.1 1565425233 installed
[x86_64] <13>Jun 14 14:29:34 rpmi: rpm-macros-alternatives-0.5.1-alt1 sisyphus+226946.100.1.1 1554830426 installed
[x86_64] <13>Jun 14 14:29:34 rpmi: alternatives-0.5.1-alt1 sisyphus+226946.100.1.1 1554830426 installed
[x86_64] <13>Jun 14 14:29:34 rpmi: ca-certificates-2020.06.29-alt1 p9+258899.100.3.1 1601998604 installed
[x86_64] <13>Jun 14 14:29:34 rpmi: ca-trust-0.1.2-alt1 p9+233349.100.1.1 1561655062 installed
[x86_64] <13>Jun 14 14:29:34 rpmi: p11-kit-trust-0.23.15-alt2 p9+254920.2400.19.1 1601385869 installed
[x86_64] <13>Jun 14 14:29:34 rpmi: libcrypto1.1-1.1.1k-alt1 p9+268376.100.3.1 1616720932 installed
[x86_64] <13>Jun 14 14:29:34 rpmi: libssl1.1-1.1.1k-alt1 p9+268376.100.3.1 1616720932 installed
[x86_64] <13>Jun 14 14:29:34 rpmi: python3-3.7.4-alt3 p9+249932.100.2.1 1587126956 installed
[x86_64] <13>Jun 14 14:29:34 rpmi: libpython3-3.7.4-alt3 p9+249932.100.2.1 1587126956 installed
[x86_64] <13>Jun 14 14:29:34 rpmi: python3-base-3.7.4-alt3 p9+249932.100.2.1 1587126956 installed
[x86_64] <13>Jun 14 14:29:34 rpmi: tests-for-installed-python3-pkgs-0.1.13.1-alt2 1535450458 installed
[x86_64] <13>Jun 14 14:29:34 rpmi: rpm-build-python3-0.1.13.1-alt2 1535450458 installed
[x86_64] Reading Package Lists...
[x86_64] Building Dependency Tree...
[x86_64] MI2a: mark python3-dev
[x86_64] MI2a: target libncurses-devel
[x86_64] MI2a: mark libncurses-devel
[x86_64] MI2a: target libtinfo-devel
[x86_64] MI2a: mark libtinfo-devel
[x86_64] MI2a: mark python3-module-setuptools
[x86_64] MI2a: target python3-module-pkg_resources
[x86_64] MI2a: mark python3-module-pkg_resources
[x86_64] rpm-build-python3 is already the newest version.
[x86_64] E: Couldn't find package python3-module-opencv
[x86_64] hsh-install: Failed to calculate package file list.
[x86_64] hsh-install: Failed to generate package file list.
2021-Jun-14 14:29:36 :: [x86_64] rastercarve.git 1.0.8-alt1: remote: cannot build src.rpm
2021-Jun-14 14:29:36 :: [x86_64] #200 rastercarve.git 1.0.8-alt1: build FAILED
[aarch64] <13>Jun 14 14:29:38 rpmi: libgdbm-1.8.3-alt10 1455054876 installed
[aarch64] <13>Jun 14 14:29:38 rpmi: libexpat-2.2.10-alt1 p9+261554.100.1.1 1605103338 installed
[aarch64] <13>Jun 14 14:29:38 rpmi: libp11-kit-0.23.15-alt2 p9+254920.2400.19.1 1601385860 installed
[aarch64] <13>Jun 14 14:29:38 rpmi: libtasn1-4.14-alt1 p9+235792.100.2.1 1565425374 installed
[aarch64] <13>Jun 14 14:29:38 rpmi: rpm-macros-alternatives-0.5.1-alt1 sisyphus+226946.100.1.1 1554830426 installed
[aarch64] <13>Jun 14 14:29:38 rpmi: alternatives-0.5.1-alt1 sisyphus+226946.100.1.1 1554830426 installed
[aarch64] <13>Jun 14 14:29:38 rpmi: ca-certificates-2020.06.29-alt1 p9+258899.100.3.1 1601998604 installed
[aarch64] <13>Jun 14 14:29:38 rpmi: ca-trust-0.1.2-alt1 p9+233349.100.1.1 1561655062 installed
[aarch64] <13>Jun 14 14:29:38 rpmi: p11-kit-trust-0.23.15-alt2 p9+254920.2400.19.1 1601385860 installed
[aarch64] <13>Jun 14 14:29:38 rpmi: libcrypto1.1-1.1.1k-alt1 p9+268376.100.3.1 1616720977 installed
[aarch64] <13>Jun 14 14:29:38 rpmi: libssl1.1-1.1.1k-alt1 p9+268376.100.3.1 1616720977 installed
[aarch64] <13>Jun 14 14:29:38 rpmi: python3-3.7.4-alt3 p9+249932.100.2.1 1587127010 installed
[aarch64] <13>Jun 14 14:29:38 rpmi: libpython3-3.7.4-alt3 p9+249932.100.2.1 1587127010 installed
[aarch64] <13>Jun 14 14:29:39 rpmi: python3-base-3.7.4-alt3 p9+249932.100.2.1 1587127010 installed
[aarch64] <13>Jun 14 14:29:39 rpmi: tests-for-installed-python3-pkgs-0.1.13.1-alt2 1535450458 installed
[aarch64] <13>Jun 14 14:29:39 rpmi: rpm-build-python3-0.1.13.1-alt2 1535450458 installed
[aarch64] Reading Package Lists...
[aarch64] Building Dependency Tree...
[aarch64] MI2a: mark python3-dev
[aarch64] MI2a: target libncurses-devel
[aarch64] MI2a: mark libncurses-devel
[aarch64] MI2a: target libtinfo-devel
[aarch64] MI2a: mark libtinfo-devel
[aarch64] MI2a: mark python3-module-setuptools
[aarch64] MI2a: target python3-module-pkg_resources
[aarch64] MI2a: mark python3-module-pkg_resources
[aarch64] rpm-build-python3 is already the newest version.
[aarch64] E: Couldn't find package python3-module-opencv
[aarch64] hsh-install: Failed to calculate package file list.
[aarch64] hsh-install: Failed to generate package file list.
2021-Jun-14 14:29:40 :: [aarch64] rastercarve.git 1.0.8-alt1: remote: cannot build src.rpm
2021-Jun-14 14:29:40 :: [aarch64] #200 rastercarve.git 1.0.8-alt1: build FAILED
[ppc64le] <13>Jun 14 14:29:43 rpmi: libgdbm-1.8.3-alt10 1557879368 installed
[ppc64le] <13>Jun 14 14:29:43 rpmi: libexpat-2.2.10-alt1 p9+261554.100.1.1 1605103354 installed
[ppc64le] <13>Jun 14 14:29:43 rpmi: libp11-kit-0.23.15-alt2 p9+254920.2400.19.1 1601385920 installed
[ppc64le] <13>Jun 14 14:29:43 rpmi: libtasn1-4.14-alt1 p9+235792.100.2.1 1565425238 installed
[ppc64le] <13>Jun 14 14:29:43 rpmi: rpm-macros-alternatives-0.5.1-alt1 sisyphus+226946.100.1.1 1554830426 installed
[ppc64le] <13>Jun 14 14:29:43 rpmi: alternatives-0.5.1-alt1 sisyphus+226946.100.1.1 1554830426 installed
[ppc64le] <13>Jun 14 14:29:43 rpmi: ca-certificates-2020.06.29-alt1 p9+258899.100.3.1 1601998604 installed
[ppc64le] <13>Jun 14 14:29:43 rpmi: ca-trust-0.1.2-alt1 p9+233349.100.1.1 1561655062 installed
[ppc64le] <13>Jun 14 14:29:43 rpmi: p11-kit-trust-0.23.15-alt2 p9+254920.2400.19.1 1601385920 installed
[ppc64le] <13>Jun 14 14:29:43 rpmi: libcrypto1.1-1.1.1k-alt1 p9+268376.100.3.1 1616721079 installed
[ppc64le] <13>Jun 14 14:29:43 rpmi: libssl1.1-1.1.1k-alt1 p9+268376.100.3.1 1616721079 installed
[ppc64le] <13>Jun 14 14:29:43 rpmi: python3-3.7.4-alt3 p9+249932.100.2.1 1587127897 installed
[ppc64le] <13>Jun 14 14:29:43 rpmi: libpython3-3.7.4-alt3 p9+249932.100.2.1 1587127897 installed
[ppc64le] <13>Jun 14 14:29:44 rpmi: python3-base-3.7.4-alt3 p9+249932.100.2.1 1587127897 installed
[ppc64le] <13>Jun 14 14:29:44 rpmi: tests-for-installed-python3-pkgs-0.1.13.1-alt2 1535450458 installed
[ppc64le] <13>Jun 14 14:29:44 rpmi: rpm-build-python3-0.1.13.1-alt2 1535450458 installed
[ppc64le] Reading Package Lists...
[ppc64le] Building Dependency Tree...
[ppc64le] MI2a: mark python3-dev
[ppc64le] MI2a: target libncurses-devel
[ppc64le] MI2a: mark libncurses-devel
[ppc64le] MI2a: target libtinfo-devel
[ppc64le] MI2a: mark libtinfo-devel
[ppc64le] MI2a: mark python3-module-setuptools
[ppc64le] MI2a: target python3-module-pkg_resources
[ppc64le] MI2a: mark python3-module-pkg_resources
[ppc64le] rpm-build-python3 is already the newest version.
[ppc64le] E: Couldn't find package python3-module-opencv
[ppc64le] hsh-install: Failed to calculate package file list.
[ppc64le] hsh-install: Failed to generate package file list.
2021-Jun-14 14:29:46 :: [ppc64le] rastercarve.git 1.0.8-alt1: remote: cannot build src.rpm
2021-Jun-14 14:29:46 :: [ppc64le] #200 rastercarve.git 1.0.8-alt1: build FAILED
[armh] <13>Jun 14 14:29:53 rpmi: libgdbm-1.8.3-alt10 1455027420 installed
[armh] <13>Jun 14 14:29:53 rpmi: libexpat-2.2.10-alt1 p9+261554.100.1.1 1605103361 installed
[armh] <13>Jun 14 14:29:53 rpmi: libp11-kit-0.23.15-alt2 p9+254920.2400.19.1 1601385997 installed
[armh] <13>Jun 14 14:29:53 rpmi: libtasn1-4.14-alt1 p9+235792.100.2.1 1591858283 installed
[armh] <13>Jun 14 14:29:53 rpmi: rpm-macros-alternatives-0.5.1-alt1 sisyphus+226946.100.1.1 1554830426 installed
[armh] <13>Jun 14 14:29:53 rpmi: alternatives-0.5.1-alt1 sisyphus+226946.100.1.1 1554830426 installed
[armh] <13>Jun 14 14:29:53 rpmi: ca-certificates-2020.06.29-alt1 p9+258899.100.3.1 1601998604 installed
[armh] <13>Jun 14 14:29:53 rpmi: ca-trust-0.1.2-alt1 p9+233349.100.1.1 1561655062 installed
[armh] <13>Jun 14 14:29:53 rpmi: p11-kit-trust-0.23.15-alt2 p9+254920.2400.19.1 1601385997 installed
[armh] <13>Jun 14 14:29:53 rpmi: libcrypto1.1-1.1.1k-alt1 p9+268376.100.3.1 1616721353 installed
[armh] <13>Jun 14 14:29:53 rpmi: libssl1.1-1.1.1k-alt1 p9+268376.100.3.1 1616721353 installed
[armh] <13>Jun 14 14:29:53 rpmi: python3-3.7.4-alt3 p9+249932.100.2.1 1592028713 installed
[armh] <13>Jun 14 14:29:53 rpmi: libpython3-3.7.4-alt3 p9+249932.100.2.1 1592028713 installed
[armh] <13>Jun 14 14:29:54 rpmi: python3-base-3.7.4-alt3 p9+249932.100.2.1 1592028713 installed
[armh] <13>Jun 14 14:29:54 rpmi: tests-for-installed-python3-pkgs-0.1.13.1-alt2 1535450458 installed
[armh] <13>Jun 14 14:29:54 rpmi: rpm-build-python3-0.1.13.1-alt2 1535450458 installed
[armh] Reading Package Lists...
[armh] Building Dependency Tree...
[armh] MI2a: mark python3-dev
[armh] MI2a: target libncurses-devel
[armh] MI2a: mark libncurses-devel
[armh] MI2a: target libtinfo-devel
[armh] MI2a: mark libtinfo-devel
[armh] MI2a: mark python3-module-setuptools
[armh] MI2a: target python3-module-pkg_resources
[armh] MI2a: mark python3-module-pkg_resources
[armh] rpm-build-python3 is already the newest version.
[armh] E: Couldn't find package python3-module-opencv
[armh] hsh-install: Failed to calculate package file list.
[armh] hsh-install: Failed to generate package file list.
2021-Jun-14 14:29:56 :: [armh] rastercarve.git 1.0.8-alt1: remote: cannot build src.rpm, but we don't care
2021-Jun-14 14:29:56 :: [armh] #200 rastercarve.git 1.0.8-alt1: build SKIPPED
2021-Jun-14 14:29:35 :: [i586] build FAILED
2021-Jun-14 14:29:36 :: [x86_64] build FAILED
2021-Jun-14 14:29:40 :: [aarch64] build FAILED
2021-Jun-14 14:29:46 :: [ppc64le] build FAILED
2021-Jun-14 14:29:56 :: task #274506 for p9 FAILED
More information about the Sisyphus-incominger
mailing list