[#221224] DONE (try 11) srpm=arpage-0.3.3-alt3_25.src.rpm srpm=CGenius-1.9.9.6beta-alt2.src.rpm ...

Fri Feb 15 18:53:50 MSK 2019

http://git.altlinux.org/tasks/archive/done/_216/221224/logs/events.11.2.log

2019-Feb-15 14:38:13 :: task #221224 for sisyphus resumed by mrdrew:
#100 build arpage-0.3.3-alt3_25.src.rpm
#200 build CGenius-1.9.9.6beta-alt2.src.rpm
#300 build fbg-0.9.1-alt3_13.src.rpm
#400 build 24-alt2 from /people/mrdrew/packages/cooldown.git fetched at 2019-Feb-11 11:33:20
#500 removed
#520 build 2.1.0-alt3 from /people/mrdrew/packages/kbookocr.git fetched at 2019-Feb-14 06:38:01
#540 removed
#600 removed
#700 build 0.1.2-alt3 from /people/mrdrew/packages/libplotmm.git fetched at 2019-Feb-12 07:49:43
#740 removed
#1000 removed
#1100 build 1.11.4.1-alt8 from /people/mrdrew/packages/lprof.git fetched at 2019-Feb-12 09:11:16
#1200 build 1.0.2-alt6 from /people/mrdrew/packages/mirall.git fetched at 2019-Feb-12 09:51:12
#1300 removed
#1400 removed
#1500 build 0.9.0-alt3 from /people/mrdrew/packages/openscada.git fetched at 2019-Feb-12 14:31:31
#1600 build 0.070-alt8 from /people/mrdrew/packages/perl-JavaScript-V8.git fetched at 2019-Feb-12 14:47:18
#1700 removed
#2000 removed
#2100 removed
#2200 build 2.3.2-alt3 from /people/mrdrew/packages/qstopmotion.git fetched at 2019-Feb-13 08:30:07
#2300 build 1.0.0-alt2 from /people/mrdrew/packages/rxclient.git fetched at 2019-Feb-13 09:01:04
#2400 build 1.1-alt2 from /people/mrdrew/packages/sfxr-sdl.git fetched at 2019-Feb-13 09:12:39
#2500 removed
#2600 build 0.9.8e-alt3 from /people/mrdrew/packages/verlihub.git fetched at 2019-Feb-13 12:15:09
#2700 build 2.02r2-alt3 from /people/mrdrew/packages/xevil.git fetched at 2019-Feb-13 13:01:11
#3000 removed
#3100 removed
2019-Feb-15 14:38:31 :: created build repo
2019-Feb-15 14:38:33 :: [i586] #100 arpage-0.3.3-alt3_25.src.rpm: build start
2019-Feb-15 14:38:33 :: [aarch64] #100 arpage-0.3.3-alt3_25.src.rpm: build start
2019-Feb-15 14:38:33 :: [x86_64] #100 arpage-0.3.3-alt3_25.src.rpm: build start
2019-Feb-15 14:39:10 :: [i586] arpage-0.3.3-alt3_25.src.rpm: remote: no need to rebuild
2019-Feb-15 14:39:10 :: [i586] #100 arpage-0.3.3-alt3_25.src.rpm: build OK
2019-Feb-15 14:39:10 :: [i586] #200 CGenius-1.9.9.6beta-alt2.src.rpm: build start
2019-Feb-15 14:39:11 :: [x86_64] arpage-0.3.3-alt3_25.src.rpm: remote: no need to rebuild
2019-Feb-15 14:39:11 :: [x86_64] #100 arpage-0.3.3-alt3_25.src.rpm: build OK
2019-Feb-15 14:39:11 :: [x86_64] #200 CGenius-1.9.9.6beta-alt2.src.rpm: build start
2019-Feb-15 14:39:40 :: [i586] CGenius-1.9.9.6beta-alt2.src.rpm: remote: no need to rebuild
2019-Feb-15 14:39:40 :: [i586] #200 CGenius-1.9.9.6beta-alt2.src.rpm: build OK
2019-Feb-15 14:39:40 :: [i586] #300 fbg-0.9.1-alt3_13.src.rpm: build start
2019-Feb-15 14:39:43 :: [x86_64] CGenius-1.9.9.6beta-alt2.src.rpm: remote: no need to rebuild
2019-Feb-15 14:39:43 :: [x86_64] #200 CGenius-1.9.9.6beta-alt2.src.rpm: build OK
2019-Feb-15 14:39:43 :: [x86_64] #300 fbg-0.9.1-alt3_13.src.rpm: build start
2019-Feb-15 14:40:08 :: [i586] fbg-0.9.1-alt3_13.src.rpm: remote: no need to rebuild
2019-Feb-15 14:40:08 :: [i586] #300 fbg-0.9.1-alt3_13.src.rpm: build OK
2019-Feb-15 14:40:08 :: [i586] #400 cooldown.git 24-alt2: build start
2019-Feb-15 14:40:09 :: [aarch64] arpage-0.3.3-alt3_25.src.rpm: remote: no need to rebuild
2019-Feb-15 14:40:09 :: [aarch64] #100 arpage-0.3.3-alt3_25.src.rpm: build OK
2019-Feb-15 14:40:09 :: [aarch64] #200 CGenius-1.9.9.6beta-alt2.src.rpm: build start
2019-Feb-15 14:40:15 :: [x86_64] fbg-0.9.1-alt3_13.src.rpm: remote: no need to rebuild
2019-Feb-15 14:40:16 :: [x86_64] #300 fbg-0.9.1-alt3_13.src.rpm: build OK
2019-Feb-15 14:40:16 :: [x86_64] #400 cooldown.git 24-alt2: build start
2019-Feb-15 14:40:46 :: [i586] cooldown.git 24-alt2: remote: no need to rebuild
2019-Feb-15 14:40:46 :: [i586] #400 cooldown.git 24-alt2: build OK
2019-Feb-15 14:40:47 :: [i586] #520 kbookocr.git 2.1.0-alt3: build start
2019-Feb-15 14:40:47 :: [x86_64] cooldown.git 24-alt2: remote: no need to rebuild
2019-Feb-15 14:40:48 :: [x86_64] #400 cooldown.git 24-alt2: build OK
2019-Feb-15 14:40:48 :: [x86_64] #520 kbookocr.git 2.1.0-alt3: build start
2019-Feb-15 14:41:11 :: [i586] kbookocr.git 2.1.0-alt3: remote: no need to rebuild
2019-Feb-15 14:41:11 :: [i586] #520 kbookocr.git 2.1.0-alt3: build OK
2019-Feb-15 14:41:11 :: [i586] #700 libplotmm.git 0.1.2-alt3: build start
2019-Feb-15 14:41:18 :: [x86_64] kbookocr.git 2.1.0-alt3: remote: no need to rebuild
2019-Feb-15 14:41:18 :: [x86_64] #520 kbookocr.git 2.1.0-alt3: build OK
2019-Feb-15 14:41:18 :: [x86_64] #700 libplotmm.git 0.1.2-alt3: build start
2019-Feb-15 14:41:22 :: [aarch64] CGenius-1.9.9.6beta-alt2.src.rpm: remote: no need to rebuild
2019-Feb-15 14:41:22 :: [aarch64] #200 CGenius-1.9.9.6beta-alt2.src.rpm: build OK
2019-Feb-15 14:41:22 :: [aarch64] #300 fbg-0.9.1-alt3_13.src.rpm: build start
2019-Feb-15 14:41:42 :: [i586] libplotmm.git 0.1.2-alt3: remote: no need to rebuild
2019-Feb-15 14:41:42 :: [i586] #700 libplotmm.git 0.1.2-alt3: build OK
2019-Feb-15 14:41:42 :: [i586] #1100 lprof.git 1.11.4.1-alt8: build start
2019-Feb-15 14:41:53 :: [x86_64] libplotmm.git 0.1.2-alt3: remote: no need to rebuild
2019-Feb-15 14:41:53 :: [x86_64] #700 libplotmm.git 0.1.2-alt3: build OK
2019-Feb-15 14:41:53 :: [x86_64] #1100 lprof.git 1.11.4.1-alt8: build start
2019-Feb-15 14:42:17 :: [i586] lprof.git 1.11.4.1-alt8: remote: no need to rebuild
2019-Feb-15 14:42:17 :: [i586] #1100 lprof.git 1.11.4.1-alt8: build OK
2019-Feb-15 14:42:17 :: [i586] #1200 mirall.git 1.0.2-alt6: build start
2019-Feb-15 14:42:24 :: [x86_64] lprof.git 1.11.4.1-alt8: remote: no need to rebuild
2019-Feb-15 14:42:24 :: [x86_64] #1100 lprof.git 1.11.4.1-alt8: build OK
2019-Feb-15 14:42:24 :: [x86_64] #1200 mirall.git 1.0.2-alt6: build start
2019-Feb-15 14:42:35 :: [aarch64] fbg-0.9.1-alt3_13.src.rpm: remote: no need to rebuild
2019-Feb-15 14:42:36 :: [aarch64] #300 fbg-0.9.1-alt3_13.src.rpm: build OK
2019-Feb-15 14:42:36 :: [aarch64] #400 cooldown.git 24-alt2: build start
2019-Feb-15 14:42:47 :: [i586] mirall.git 1.0.2-alt6: remote: no need to rebuild
2019-Feb-15 14:42:47 :: [i586] #1200 mirall.git 1.0.2-alt6: build OK
2019-Feb-15 14:42:47 :: [i586] #1500 openscada.git 0.9.0-alt3: build start
2019-Feb-15 14:42:55 :: [x86_64] mirall.git 1.0.2-alt6: remote: no need to rebuild
2019-Feb-15 14:42:55 :: [x86_64] #1200 mirall.git 1.0.2-alt6: build OK
2019-Feb-15 14:42:56 :: [x86_64] #1500 openscada.git 0.9.0-alt3: build start
2019-Feb-15 14:43:30 :: [i586] openscada.git 0.9.0-alt3: remote: no need to rebuild
2019-Feb-15 14:43:30 :: [i586] #1500 openscada.git 0.9.0-alt3: build OK
2019-Feb-15 14:43:30 :: [i586] #1600 perl-JavaScript-V8.git 0.070-alt8: build start
2019-Feb-15 14:43:31 :: [x86_64] openscada.git 0.9.0-alt3: remote: no need to rebuild
2019-Feb-15 14:43:31 :: [x86_64] #1500 openscada.git 0.9.0-alt3: build OK
2019-Feb-15 14:43:31 :: [x86_64] #1600 perl-JavaScript-V8.git 0.070-alt8: build start
2019-Feb-15 14:43:52 :: [i586] perl-JavaScript-V8.git 0.070-alt8: remote: no need to rebuild
2019-Feb-15 14:43:52 :: [i586] #1600 perl-JavaScript-V8.git 0.070-alt8: build OK
2019-Feb-15 14:43:52 :: [i586] #2200 qstopmotion.git 2.3.2-alt3: build start
2019-Feb-15 14:43:53 :: [x86_64] perl-JavaScript-V8.git 0.070-alt8: remote: no need to rebuild
2019-Feb-15 14:43:53 :: [x86_64] #1600 perl-JavaScript-V8.git 0.070-alt8: build OK
2019-Feb-15 14:43:53 :: [x86_64] #2200 qstopmotion.git 2.3.2-alt3: build start
2019-Feb-15 14:43:53 :: [aarch64] cooldown.git 24-alt2: remote: no need to rebuild
2019-Feb-15 14:43:54 :: [aarch64] #400 cooldown.git 24-alt2: build OK
2019-Feb-15 14:43:54 :: [aarch64] #520 kbookocr.git 2.1.0-alt3: build start
2019-Feb-15 14:44:15 :: [i586] qstopmotion.git 2.3.2-alt3: remote: no need to rebuild
2019-Feb-15 14:44:15 :: [i586] #2200 qstopmotion.git 2.3.2-alt3: build OK
2019-Feb-15 14:44:15 :: [i586] #2300 rxclient.git 1.0.0-alt2: build start
2019-Feb-15 14:44:16 :: [x86_64] qstopmotion.git 2.3.2-alt3: remote: no need to rebuild
2019-Feb-15 14:44:16 :: [x86_64] #2200 qstopmotion.git 2.3.2-alt3: build OK
2019-Feb-15 14:44:16 :: [x86_64] #2300 rxclient.git 1.0.0-alt2: build start
2019-Feb-15 14:44:38 :: [i586] rxclient.git 1.0.0-alt2: remote: no need to rebuild
2019-Feb-15 14:44:38 :: [i586] #2300 rxclient.git 1.0.0-alt2: build OK
2019-Feb-15 14:44:38 :: [i586] #2400 sfxr-sdl.git 1.1-alt2: build start
2019-Feb-15 14:44:40 :: [x86_64] rxclient.git 1.0.0-alt2: remote: no need to rebuild
2019-Feb-15 14:44:40 :: [x86_64] #2300 rxclient.git 1.0.0-alt2: build OK
2019-Feb-15 14:44:40 :: [x86_64] #2400 sfxr-sdl.git 1.1-alt2: build start
2019-Feb-15 14:44:59 :: [i586] sfxr-sdl.git 1.1-alt2: remote: no need to rebuild
2019-Feb-15 14:44:59 :: [i586] #2400 sfxr-sdl.git 1.1-alt2: build OK
2019-Feb-15 14:44:59 :: [i586] #2600 verlihub.git 0.9.8e-alt3: build start
2019-Feb-15 14:45:02 :: [x86_64] sfxr-sdl.git 1.1-alt2: remote: no need to rebuild
2019-Feb-15 14:45:02 :: [x86_64] #2400 sfxr-sdl.git 1.1-alt2: build OK
2019-Feb-15 14:45:02 :: [x86_64] #2600 verlihub.git 0.9.8e-alt3: build start
2019-Feb-15 14:45:21 :: [i586] verlihub.git 0.9.8e-alt3: remote: no need to rebuild
2019-Feb-15 14:45:21 :: [i586] #2600 verlihub.git 0.9.8e-alt3: build OK
2019-Feb-15 14:45:21 :: [i586] #2700 xevil.git 2.02r2-alt3: build start
2019-Feb-15 14:45:23 :: [x86_64] verlihub.git 0.9.8e-alt3: remote: no need to rebuild
2019-Feb-15 14:45:24 :: [x86_64] #2600 verlihub.git 0.9.8e-alt3: build OK
2019-Feb-15 14:45:24 :: [x86_64] #2700 xevil.git 2.02r2-alt3: build start
2019-Feb-15 14:45:25 :: [aarch64] kbookocr.git 2.1.0-alt3: remote: no need to rebuild
2019-Feb-15 14:45:25 :: [aarch64] #520 kbookocr.git 2.1.0-alt3: build OK
2019-Feb-15 14:45:25 :: [aarch64] #700 libplotmm.git 0.1.2-alt3: build start
2019-Feb-15 14:45:43 :: [i586] xevil.git 2.02r2-alt3: remote: no need to rebuild
2019-Feb-15 14:45:43 :: [i586] #2700 xevil.git 2.02r2-alt3: build OK
2019-Feb-15 14:45:46 :: [x86_64] xevil.git 2.02r2-alt3: remote: no need to rebuild
2019-Feb-15 14:45:46 :: [x86_64] #2700 xevil.git 2.02r2-alt3: build OK
2019-Feb-15 14:46:59 :: [aarch64] libplotmm.git 0.1.2-alt3: remote: no need to rebuild
2019-Feb-15 14:46:59 :: [aarch64] #700 libplotmm.git 0.1.2-alt3: build OK
2019-Feb-15 14:46:59 :: [aarch64] #1100 lprof.git 1.11.4.1-alt8: build start
2019-Feb-15 14:48:08 :: [aarch64] lprof.git 1.11.4.1-alt8: remote: no need to rebuild
2019-Feb-15 14:48:08 :: [aarch64] #1100 lprof.git 1.11.4.1-alt8: build OK
2019-Feb-15 14:48:08 :: [aarch64] #1200 mirall.git 1.0.2-alt6: build start
2019-Feb-15 14:49:05 :: [aarch64] mirall.git 1.0.2-alt6: remote: no need to rebuild
2019-Feb-15 14:49:05 :: [aarch64] #1200 mirall.git 1.0.2-alt6: build OK
2019-Feb-15 14:49:05 :: [aarch64] #1500 openscada.git 0.9.0-alt3: build start
2019-Feb-15 14:50:16 :: [aarch64] openscada.git 0.9.0-alt3: remote: no need to rebuild
2019-Feb-15 14:50:16 :: [aarch64] #1500 openscada.git 0.9.0-alt3: build OK
2019-Feb-15 14:50:16 :: [aarch64] #1600 perl-JavaScript-V8.git 0.070-alt8: build start
2019-Feb-15 14:51:11 :: [aarch64] #1600 perl-JavaScript-V8.git 0.070-alt8: build SKIPPED
2019-Feb-15 14:51:12 :: [aarch64] #2200 qstopmotion.git 2.3.2-alt3: build start
2019-Feb-15 14:52:14 :: [aarch64] qstopmotion.git 2.3.2-alt3: remote: no need to rebuild
2019-Feb-15 14:52:14 :: [aarch64] #2200 qstopmotion.git 2.3.2-alt3: build OK
2019-Feb-15 14:52:14 :: [aarch64] #2300 rxclient.git 1.0.0-alt2: build start
2019-Feb-15 14:53:13 :: [aarch64] rxclient.git 1.0.0-alt2: remote: no need to rebuild
2019-Feb-15 14:53:13 :: [aarch64] #2300 rxclient.git 1.0.0-alt2: build OK
2019-Feb-15 14:53:13 :: [aarch64] #2400 sfxr-sdl.git 1.1-alt2: build start
2019-Feb-15 14:54:12 :: [aarch64] sfxr-sdl.git 1.1-alt2: remote: no need to rebuild
2019-Feb-15 14:54:12 :: [aarch64] #2400 sfxr-sdl.git 1.1-alt2: build OK
2019-Feb-15 14:54:12 :: [aarch64] #2600 verlihub.git 0.9.8e-alt3: build start
2019-Feb-15 14:55:12 :: [aarch64] verlihub.git 0.9.8e-alt3: remote: no need to rebuild
2019-Feb-15 14:55:12 :: [aarch64] #2600 verlihub.git 0.9.8e-alt3: build OK
2019-Feb-15 14:55:12 :: [aarch64] #2700 xevil.git 2.02r2-alt3: build start
2019-Feb-15 14:56:11 :: [aarch64] xevil.git 2.02r2-alt3: remote: no need to rebuild
2019-Feb-15 14:56:11 :: [aarch64] #2700 xevil.git 2.02r2-alt3: build OK
2019-Feb-15 15:00:55 :: build check OK
warning (#400): cooldown-data-24-alt2.x86_64.rpm should be .noarch.rpm
warning (#400): cooldown-font-24-alt2.x86_64.rpm should be .noarch.rpm
2019-Feb-15 15:04:03 :: noarch check OK
2019-Feb-15 15:04:04 :: plan: src +15 -15 =18494, aarch64 +121 -117 =29363, i586 +127 -127 =32566, noarch +11 -11 =19117, x86_64 +123 -123 =32722
2019-Feb-15 15:04:05 :: version check OK
2019-Feb-15 15:04:55 :: generated apt indices
2019-Feb-15 15:04:56 :: created next repo
2019-Feb-15 15:05:14 :: dependencies check OK
2019-Feb-15 15:05:42 :: ELF symbols check OK
	i586: CGenius=1.9.9.6beta-alt2 post-install unowned files:
/usr/share/icons/hicolor/512x512
/usr/share/icons/hicolor/512x512/apps
2019-Feb-15 15:06:11 :: [i586] #200 CGenius: no need to repeat, install check SKIPPED
	x86_64: CGenius=1.9.9.6beta-alt2 post-install unowned files:
/usr/share/icons/hicolor/512x512
/usr/share/icons/hicolor/512x512/apps
2019-Feb-15 15:06:13 :: [x86_64] #200 CGenius: no need to repeat, install check SKIPPED
2019-Feb-15 15:06:31 :: [i586] #200 CGenius-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:06:33 :: [x86_64] #200 CGenius-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:06:50 :: [i586] #200 CGenius-hqp: no need to repeat, install check SKIPPED
2019-Feb-15 15:06:53 :: [x86_64] #200 CGenius-hqp: no need to repeat, install check SKIPPED
	i586: arpage=0.3.3-alt3_25 post-install unowned files:
/usr/share/arpage
2019-Feb-15 15:07:08 :: [i586] #100 arpage: no need to repeat, install check SKIPPED
	x86_64: arpage=0.3.3-alt3_25 post-install unowned files:
/usr/share/arpage
2019-Feb-15 15:07:12 :: [x86_64] #100 arpage: no need to repeat, install check SKIPPED
2019-Feb-15 15:07:28 :: [i586] #100 arpage-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:07:31 :: [x86_64] #100 arpage-debuginfo: no need to repeat, install check SKIPPED
	i586: cooldown=24-alt2 post-install unowned files:
/usr/share/icons/hicolor/128x128
/usr/share/icons/hicolor/128x128/apps
/usr/share/icons/hicolor/24x24
/usr/share/icons/hicolor/24x24/apps
/usr/share/icons/hicolor/64x64
/usr/share/icons/hicolor/64x64/apps
2019-Feb-15 15:07:47 :: [i586] #400 cooldown: no need to repeat, install check SKIPPED
	x86_64: cooldown=24-alt2 post-install unowned files:
/usr/share/icons/hicolor/128x128
/usr/share/icons/hicolor/128x128/apps
/usr/share/icons/hicolor/24x24
/usr/share/icons/hicolor/24x24/apps
/usr/share/icons/hicolor/64x64
/usr/share/icons/hicolor/64x64/apps
2019-Feb-15 15:07:51 :: [x86_64] #400 cooldown: no need to repeat, install check SKIPPED
	i586: cooldown-data=24-alt2 post-install unowned files:
/usr/share/games/cooldown
2019-Feb-15 15:08:05 :: [i586] #400 cooldown-data: no need to repeat, install check SKIPPED
	x86_64: cooldown-data=24-alt2 post-install unowned files:
/usr/share/games/cooldown
2019-Feb-15 15:08:11 :: [x86_64] #400 cooldown-data: no need to repeat, install check SKIPPED
2019-Feb-15 15:08:23 :: [i586] #400 cooldown-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:08:34 :: [x86_64] #400 cooldown-debuginfo: no need to repeat, install check SKIPPED
	i586: cooldown-font=24-alt2 post-install unowned files:
/usr/share/games/cooldown
2019-Feb-15 15:08:42 :: [i586] #400 cooldown-font: no need to repeat, install check SKIPPED
	x86_64: cooldown-font=24-alt2 post-install unowned files:
/usr/share/games/cooldown
2019-Feb-15 15:08:53 :: [x86_64] #400 cooldown-font: no need to repeat, install check SKIPPED
2019-Feb-15 15:09:00 :: [i586] #300 fbg: no need to repeat, install check SKIPPED
2019-Feb-15 15:09:14 :: [x86_64] #300 fbg: no need to repeat, install check SKIPPED
2019-Feb-15 15:09:14 :: [i586] #300 fbg-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:09:30 :: [i586] #520 kbookocr: no need to repeat, install check SKIPPED
2019-Feb-15 15:09:32 :: [x86_64] #300 fbg-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:09:47 :: [x86_64] #520 kbookocr: no need to repeat, install check SKIPPED
2019-Feb-15 15:09:50 :: [i586] #520 kbookocr-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:10:04 :: [x86_64] #520 kbookocr-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:10:07 :: [i586] #1500 libopenscada: no need to repeat, install check SKIPPED
2019-Feb-15 15:10:23 :: [x86_64] #1500 libopenscada: no need to repeat, install check SKIPPED
2019-Feb-15 15:10:25 :: [i586] #1500 libopenscada-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:10:41 :: [i586] #700 libplotmm: no need to repeat, install check SKIPPED
2019-Feb-15 15:10:42 :: [x86_64] #1500 libopenscada-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:10:55 :: [i586] #700 libplotmm-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:11:01 :: [x86_64] #700 libplotmm: no need to repeat, install check SKIPPED
2019-Feb-15 15:11:08 :: [i586] #700 libplotmm-devel: no need to repeat, install check SKIPPED
2019-Feb-15 15:11:16 :: [x86_64] #700 libplotmm-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:11:22 :: [i586] #700 libplotmm-devel-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:11:29 :: [x86_64] #700 libplotmm-devel: no need to repeat, install check SKIPPED
2019-Feb-15 15:11:35 :: [i586] #2600 libverlihub: no need to repeat, install check SKIPPED
2019-Feb-15 15:11:42 :: [x86_64] #700 libplotmm-devel-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:11:48 :: [i586] #2600 libverlihub-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:11:56 :: [x86_64] #2600 libverlihub: no need to repeat, install check SKIPPED
2019-Feb-15 15:12:01 :: [i586] #2600 libverlihub-devel: no need to repeat, install check SKIPPED
2019-Feb-15 15:12:10 :: [x86_64] #2600 libverlihub-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:12:14 :: [i586] #1100 lprof: no need to repeat, install check SKIPPED
2019-Feb-15 15:12:23 :: [x86_64] #2600 libverlihub-devel: no need to repeat, install check SKIPPED
2019-Feb-15 15:12:27 :: [i586] #1100 lprof-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:12:37 :: [x86_64] #1100 lprof: no need to repeat, install check SKIPPED
2019-Feb-15 15:12:40 :: [i586] #1200 mirall: no need to repeat, install check SKIPPED
2019-Feb-15 15:12:51 :: [x86_64] #1100 lprof-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:12:54 :: [i586] #1200 mirall-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:13:04 :: [x86_64] #1200 mirall: no need to repeat, install check SKIPPED
2019-Feb-15 15:13:08 :: [i586] #1500 openscada: no need to repeat, install check SKIPPED
2019-Feb-15 15:13:18 :: [x86_64] #1200 mirall-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:13:22 :: [i586] #1500 openscada-Archive.DBArch: no need to repeat, install check SKIPPED
2019-Feb-15 15:13:31 :: [x86_64] #1500 openscada: no need to repeat, install check SKIPPED
2019-Feb-15 15:13:35 :: [i586] #1500 openscada-Archive.DBArch-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:13:46 :: [x86_64] #1500 openscada-Archive.DBArch: no need to repeat, install check SKIPPED
2019-Feb-15 15:13:49 :: [i586] #1500 openscada-Archive.FSArch: no need to repeat, install check SKIPPED
2019-Feb-15 15:14:00 :: [x86_64] #1500 openscada-Archive.DBArch-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:14:02 :: [i586] #1500 openscada-Archive.FSArch-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:14:14 :: [x86_64] #1500 openscada-Archive.FSArch: no need to repeat, install check SKIPPED
2019-Feb-15 15:14:15 :: [i586] #1500 openscada-DAQ.AMRDevs: no need to repeat, install check SKIPPED
2019-Feb-15 15:14:28 :: [x86_64] #1500 openscada-Archive.FSArch-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:14:29 :: [i586] #1500 openscada-DAQ.AMRDevs-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:14:42 :: [x86_64] #1500 openscada-DAQ.AMRDevs: no need to repeat, install check SKIPPED
2019-Feb-15 15:14:42 :: [i586] #1500 openscada-DAQ.BFN: no need to repeat, install check SKIPPED
2019-Feb-15 15:14:55 :: [x86_64] #1500 openscada-DAQ.AMRDevs-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:14:55 :: [i586] #1500 openscada-DAQ.BFN-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:15:08 :: [i586] #1500 openscada-DAQ.BlockCalc: no need to repeat, install check SKIPPED
2019-Feb-15 15:15:08 :: [x86_64] #1500 openscada-DAQ.BFN: no need to repeat, install check SKIPPED
2019-Feb-15 15:15:21 :: [i586] #1500 openscada-DAQ.BlockCalc-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:15:21 :: [x86_64] #1500 openscada-DAQ.BFN-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:15:35 :: [i586] #1500 openscada-DAQ.Comedi: no need to repeat, install check SKIPPED
2019-Feb-15 15:15:35 :: [x86_64] #1500 openscada-DAQ.BlockCalc: no need to repeat, install check SKIPPED
2019-Feb-15 15:15:48 :: [x86_64] #1500 openscada-DAQ.BlockCalc-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:15:48 :: [i586] #1500 openscada-DAQ.Comedi-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:16:02 :: [x86_64] #1500 openscada-DAQ.Comedi: no need to repeat, install check SKIPPED
2019-Feb-15 15:16:03 :: [i586] #1500 openscada-DAQ.DAQGate: no need to repeat, install check SKIPPED
2019-Feb-15 15:16:16 :: [x86_64] #1500 openscada-DAQ.Comedi-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:16:16 :: [i586] #1500 openscada-DAQ.DAQGate-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:16:30 :: [i586] #1500 openscada-DAQ.DCON: no need to repeat, install check SKIPPED
2019-Feb-15 15:16:30 :: [x86_64] #1500 openscada-DAQ.DAQGate: no need to repeat, install check SKIPPED
2019-Feb-15 15:16:44 :: [i586] #1500 openscada-DAQ.DCON-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:16:44 :: [x86_64] #1500 openscada-DAQ.DAQGate-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:16:57 :: [i586] #1500 openscada-DAQ.DiamondBoards: no need to repeat, install check SKIPPED
2019-Feb-15 15:16:58 :: [x86_64] #1500 openscada-DAQ.DCON: no need to repeat, install check SKIPPED
2019-Feb-15 15:17:10 :: [i586] #1500 openscada-DAQ.DiamondBoards-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:17:11 :: [x86_64] #1500 openscada-DAQ.DCON-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:17:24 :: [i586] #1500 openscada-DAQ.GPIO: no need to repeat, install check SKIPPED
2019-Feb-15 15:17:25 :: [x86_64] #1500 openscada-DAQ.GPIO: no need to repeat, install check SKIPPED
2019-Feb-15 15:17:37 :: [i586] #1500 openscada-DAQ.GPIO-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:17:39 :: [x86_64] #1500 openscada-DAQ.GPIO-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:17:50 :: [i586] #1500 openscada-DAQ.ICP_DAS: no need to repeat, install check SKIPPED
2019-Feb-15 15:17:52 :: [x86_64] #1500 openscada-DAQ.JavaLikeCalc: no need to repeat, install check SKIPPED
2019-Feb-15 15:18:05 :: [i586] #1500 openscada-DAQ.ICP_DAS-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:18:05 :: [x86_64] #1500 openscada-DAQ.JavaLikeCalc-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:18:18 :: [i586] #1500 openscada-DAQ.JavaLikeCalc: no need to repeat, install check SKIPPED
2019-Feb-15 15:18:19 :: [x86_64] #1500 openscada-DAQ.LogicLev: no need to repeat, install check SKIPPED
2019-Feb-15 15:18:31 :: [i586] #1500 openscada-DAQ.JavaLikeCalc-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:18:33 :: [x86_64] #1500 openscada-DAQ.LogicLev-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:18:46 :: [i586] #1500 openscada-DAQ.LogicLev: no need to repeat, install check SKIPPED
2019-Feb-15 15:18:46 :: [x86_64] #1500 openscada-DAQ.MMS: no need to repeat, install check SKIPPED
2019-Feb-15 15:18:59 :: [i586] #1500 openscada-DAQ.LogicLev-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:19:00 :: [x86_64] #1500 openscada-DAQ.MMS-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:19:12 :: [i586] #1500 openscada-DAQ.MMS: no need to repeat, install check SKIPPED
2019-Feb-15 15:19:14 :: [x86_64] #1500 openscada-DAQ.ModBus: no need to repeat, install check SKIPPED
2019-Feb-15 15:19:26 :: [i586] #1500 openscada-DAQ.MMS-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:19:27 :: [x86_64] #1500 openscada-DAQ.ModBus-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:19:39 :: [i586] #1500 openscada-DAQ.ModBus: no need to repeat, install check SKIPPED
2019-Feb-15 15:19:43 :: [x86_64] #1500 openscada-DAQ.OPC_UA: no need to repeat, install check SKIPPED
2019-Feb-15 15:19:54 :: [i586] #1500 openscada-DAQ.ModBus-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:19:56 :: [x86_64] #1500 openscada-DAQ.OPC_UA-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:20:11 :: [i586] #1500 openscada-DAQ.OPC_UA: no need to repeat, install check SKIPPED
2019-Feb-15 15:20:11 :: [x86_64] #1500 openscada-DAQ.SNMP: no need to repeat, install check SKIPPED
2019-Feb-15 15:20:24 :: [i586] #1500 openscada-DAQ.OPC_UA-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:20:26 :: [x86_64] #1500 openscada-DAQ.SNMP-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:20:39 :: [i586] #1500 openscada-DAQ.SNMP: no need to repeat, install check SKIPPED
2019-Feb-15 15:20:39 :: [x86_64] #1500 openscada-DAQ.Siemens: no need to repeat, install check SKIPPED
2019-Feb-15 15:20:53 :: [x86_64] #1500 openscada-DAQ.Siemens-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:20:54 :: [i586] #1500 openscada-DAQ.SNMP-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:21:07 :: [i586] #1500 openscada-DAQ.Siemens: no need to repeat, install check SKIPPED
2019-Feb-15 15:21:08 :: [x86_64] #1500 openscada-DAQ.SoundCard: no need to repeat, install check SKIPPED
2019-Feb-15 15:21:22 :: [i586] #1500 openscada-DAQ.Siemens-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:21:22 :: [x86_64] #1500 openscada-DAQ.SoundCard-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:21:35 :: [i586] #1500 openscada-DAQ.SoundCard: no need to repeat, install check SKIPPED
2019-Feb-15 15:21:36 :: [x86_64] #1500 openscada-DAQ.System: no need to repeat, install check SKIPPED
2019-Feb-15 15:21:48 :: [i586] #1500 openscada-DAQ.SoundCard-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:21:49 :: [x86_64] #1500 openscada-DAQ.System-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:22:03 :: [x86_64] #1500 openscada-DB.DBF: no need to repeat, install check SKIPPED
2019-Feb-15 15:22:03 :: [i586] #1500 openscada-DAQ.System: no need to repeat, install check SKIPPED
2019-Feb-15 15:22:17 :: [i586] #1500 openscada-DAQ.System-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:22:17 :: [x86_64] #1500 openscada-DB.DBF-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:22:31 :: [i586] #1500 openscada-DB.DBF: no need to repeat, install check SKIPPED
2019-Feb-15 15:22:32 :: [x86_64] #1500 openscada-DB.FireBird: no need to repeat, install check SKIPPED
2019-Feb-15 15:22:45 :: [i586] #1500 openscada-DB.DBF-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:22:46 :: [x86_64] #1500 openscada-DB.FireBird-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:22:58 :: [i586] #1500 openscada-DB.FireBird: no need to repeat, install check SKIPPED
2019-Feb-15 15:22:59 :: [x86_64] #1500 openscada-DB.MySQL: no need to repeat, install check SKIPPED
2019-Feb-15 15:23:12 :: [i586] #1500 openscada-DB.FireBird-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:23:12 :: [x86_64] #1500 openscada-DB.MySQL-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:23:24 :: [i586] #1500 openscada-DB.MySQL: no need to repeat, install check SKIPPED
2019-Feb-15 15:23:25 :: [x86_64] #1500 openscada-DB.PostgreSQL: no need to repeat, install check SKIPPED
2019-Feb-15 15:23:37 :: [i586] #1500 openscada-DB.MySQL-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:23:38 :: [x86_64] #1500 openscada-DB.PostgreSQL-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:23:50 :: [i586] #1500 openscada-DB.PostgreSQL: no need to repeat, install check SKIPPED
2019-Feb-15 15:23:51 :: [x86_64] #1500 openscada-DB.SQLite: no need to repeat, install check SKIPPED
2019-Feb-15 15:24:03 :: [i586] #1500 openscada-DB.PostgreSQL-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:24:04 :: [x86_64] #1500 openscada-DB.SQLite-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:24:17 :: [x86_64] #1500 openscada-LibDB.Main: no need to repeat, install check SKIPPED
2019-Feb-15 15:24:17 :: [i586] #1500 openscada-DB.SQLite: no need to repeat, install check SKIPPED
2019-Feb-15 15:24:30 :: [i586] #1500 openscada-DB.SQLite-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:24:30 :: [x86_64] #1500 openscada-LibDB.VCA: no need to repeat, install check SKIPPED
2019-Feb-15 15:24:43 :: [x86_64] #1500 openscada-Model.AGLKS: no need to repeat, install check SKIPPED
2019-Feb-15 15:24:43 :: [i586] #1500 openscada-LibDB.Main: no need to repeat, install check SKIPPED
2019-Feb-15 15:24:56 :: [i586] #1500 openscada-LibDB.VCA: no need to repeat, install check SKIPPED
2019-Feb-15 15:24:57 :: [x86_64] #1500 openscada-Model.Boiler: no need to repeat, install check SKIPPED
2019-Feb-15 15:25:09 :: [i586] #1500 openscada-Model.AGLKS: no need to repeat, install check SKIPPED
2019-Feb-15 15:25:11 :: [x86_64] #1500 openscada-Protocol.HTTP: no need to repeat, install check SKIPPED
2019-Feb-15 15:25:22 :: [i586] #1500 openscada-Model.Boiler: no need to repeat, install check SKIPPED
2019-Feb-15 15:25:24 :: [x86_64] #1500 openscada-Protocol.HTTP-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:25:36 :: [i586] #1500 openscada-Protocol.HTTP: no need to repeat, install check SKIPPED
2019-Feb-15 15:25:38 :: [x86_64] #1500 openscada-Protocol.SelfSystem: no need to repeat, install check SKIPPED
2019-Feb-15 15:25:48 :: [i586] #1500 openscada-Protocol.HTTP-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:25:51 :: [x86_64] #1500 openscada-Protocol.SelfSystem-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:26:01 :: [i586] #1500 openscada-Protocol.SelfSystem: no need to repeat, install check SKIPPED
2019-Feb-15 15:26:04 :: [x86_64] #1500 openscada-Protocol.UserProtocol: no need to repeat, install check SKIPPED
2019-Feb-15 15:26:14 :: [i586] #1500 openscada-Protocol.SelfSystem-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:26:17 :: [x86_64] #1500 openscada-Protocol.UserProtocol-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:26:29 :: [i586] #1500 openscada-Protocol.UserProtocol: no need to repeat, install check SKIPPED
2019-Feb-15 15:26:31 :: [x86_64] #1500 openscada-Special.FLibComplex1: no need to repeat, install check SKIPPED
2019-Feb-15 15:26:42 :: [i586] #1500 openscada-Protocol.UserProtocol-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:26:44 :: [x86_64] #1500 openscada-Special.FLibComplex1-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:26:55 :: [i586] #1500 openscada-Special.FLibComplex1: no need to repeat, install check SKIPPED
2019-Feb-15 15:26:57 :: [x86_64] #1500 openscada-Special.FLibMath: no need to repeat, install check SKIPPED
2019-Feb-15 15:27:08 :: [i586] #1500 openscada-Special.FLibComplex1-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:27:13 :: [x86_64] #1500 openscada-Special.FLibMath-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:27:20 :: [i586] #1500 openscada-Special.FLibMath: no need to repeat, install check SKIPPED
2019-Feb-15 15:27:26 :: [x86_64] #1500 openscada-Special.FLibSYS: no need to repeat, install check SKIPPED
2019-Feb-15 15:27:34 :: [i586] #1500 openscada-Special.FLibMath-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:27:47 :: [i586] #1500 openscada-Special.FLibSYS: no need to repeat, install check SKIPPED
2019-Feb-15 15:27:47 :: [x86_64] #1500 openscada-Special.FLibSYS-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:28:01 :: [i586] #1500 openscada-Special.FLibSYS-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:28:04 :: [x86_64] #1500 openscada-Special.SystemTests: no need to repeat, install check SKIPPED
2019-Feb-15 15:28:20 :: [i586] #1500 openscada-Special.SystemTests: no need to repeat, install check SKIPPED
2019-Feb-15 15:28:22 :: [x86_64] #1500 openscada-Special.SystemTests-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:28:40 :: [i586] #1500 openscada-Special.SystemTests-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:28:44 :: [x86_64] #1500 openscada-Transport.SSL: no need to repeat, install check SKIPPED
2019-Feb-15 15:29:00 :: [i586] #1500 openscada-Transport.SSL: no need to repeat, install check SKIPPED
2019-Feb-15 15:29:05 :: [x86_64] #1500 openscada-Transport.SSL-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:29:20 :: [i586] #1500 openscada-Transport.SSL-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:29:26 :: [x86_64] #1500 openscada-Transport.Serial: no need to repeat, install check SKIPPED
2019-Feb-15 15:29:41 :: [i586] #1500 openscada-Transport.Serial: no need to repeat, install check SKIPPED
2019-Feb-15 15:29:46 :: [x86_64] #1500 openscada-Transport.Serial-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:30:02 :: [i586] #1500 openscada-Transport.Serial-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:30:07 :: [x86_64] #1500 openscada-Transport.Sockets: no need to repeat, install check SKIPPED
2019-Feb-15 15:30:17 :: [i586] #1500 openscada-Transport.Sockets: no need to repeat, install check SKIPPED
2019-Feb-15 15:30:28 :: [x86_64] #1500 openscada-Transport.Sockets-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:30:34 :: [i586] #1500 openscada-Transport.Sockets-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:30:49 :: [x86_64] #1500 openscada-UI.QTCfg: no need to repeat, install check SKIPPED
2019-Feb-15 15:30:56 :: [i586] #1500 openscada-UI.QTCfg: no need to repeat, install check SKIPPED
2019-Feb-15 15:31:09 :: [x86_64] #1500 openscada-UI.QTCfg-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:31:17 :: [i586] #1500 openscada-UI.QTCfg-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:31:30 :: [x86_64] #1500 openscada-UI.QTStarter: no need to repeat, install check SKIPPED
2019-Feb-15 15:31:37 :: [i586] #1500 openscada-UI.QTStarter: no need to repeat, install check SKIPPED
2019-Feb-15 15:31:52 :: [x86_64] #1500 openscada-UI.QTStarter-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:31:59 :: [i586] #1500 openscada-UI.QTStarter-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:32:12 :: [x86_64] #1500 openscada-UI.VCAEngine: no need to repeat, install check SKIPPED
2019-Feb-15 15:32:19 :: [i586] #1500 openscada-UI.VCAEngine: no need to repeat, install check SKIPPED
2019-Feb-15 15:32:32 :: [x86_64] #1500 openscada-UI.VCAEngine-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:32:40 :: [i586] #1500 openscada-UI.VCAEngine-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:32:53 :: [x86_64] #1500 openscada-UI.Vision: no need to repeat, install check SKIPPED
2019-Feb-15 15:33:00 :: [i586] #1500 openscada-UI.Vision: no need to repeat, install check SKIPPED
2019-Feb-15 15:33:15 :: [x86_64] #1500 openscada-UI.Vision-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:33:20 :: [i586] #1500 openscada-UI.Vision-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:33:36 :: [x86_64] #1500 openscada-UI.WebCfg: no need to repeat, install check SKIPPED
2019-Feb-15 15:33:40 :: [i586] #1500 openscada-UI.WebCfg: no need to repeat, install check SKIPPED
2019-Feb-15 15:33:57 :: [x86_64] #1500 openscada-UI.WebCfg-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:34:00 :: [i586] #1500 openscada-UI.WebCfg-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:34:18 :: [x86_64] #1500 openscada-UI.WebCfgD: no need to repeat, install check SKIPPED
2019-Feb-15 15:34:22 :: [i586] #1500 openscada-UI.WebCfgD: no need to repeat, install check SKIPPED
2019-Feb-15 15:34:37 :: [x86_64] #1500 openscada-UI.WebCfgD-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:34:44 :: [i586] #1500 openscada-UI.WebCfgD-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:34:56 :: [x86_64] #1500 openscada-UI.WebUser: no need to repeat, install check SKIPPED
2019-Feb-15 15:35:05 :: [i586] #1500 openscada-UI.WebUser: no need to repeat, install check SKIPPED
2019-Feb-15 15:35:15 :: [x86_64] #1500 openscada-UI.WebUser-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:35:23 :: [i586] #1500 openscada-UI.WebUser-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:35:35 :: [x86_64] #1500 openscada-UI.WebVision: no need to repeat, install check SKIPPED
2019-Feb-15 15:35:43 :: [i586] #1500 openscada-UI.WebVision: no need to repeat, install check SKIPPED
2019-Feb-15 15:35:55 :: [x86_64] #1500 openscada-UI.WebVision-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:36:05 :: [i586] #1500 openscada-UI.WebVision-debuginfo: no need to repeat, install check SKIPPED
	x86_64: openscada-core=0.9.0-alt3 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2019-Feb-15 15:36:14 :: [x86_64] #1500 openscada-core: no need to repeat, install check SKIPPED
	i586: openscada-core=0.9.0-alt3 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2019-Feb-15 15:36:25 :: [i586] #1500 openscada-core: no need to repeat, install check SKIPPED
2019-Feb-15 15:36:35 :: [x86_64] #1500 openscada-core-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:36:45 :: [i586] #1500 openscada-core-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:36:53 :: [x86_64] #1500 openscada-devel: no need to repeat, install check SKIPPED
2019-Feb-15 15:37:05 :: [i586] #1500 openscada-devel: no need to repeat, install check SKIPPED
2019-Feb-15 15:37:13 :: [x86_64] #1500 openscada-docEN: no need to repeat, install check SKIPPED
2019-Feb-15 15:37:23 :: [i586] #1500 openscada-docEN: no need to repeat, install check SKIPPED
2019-Feb-15 15:37:32 :: [x86_64] #1500 openscada-docRU: no need to repeat, install check SKIPPED
2019-Feb-15 15:37:41 :: [i586] #1500 openscada-docRU: no need to repeat, install check SKIPPED
2019-Feb-15 15:37:51 :: [x86_64] #1500 openscada-docUK: no need to repeat, install check SKIPPED
2019-Feb-15 15:37:59 :: [i586] #1500 openscada-docUK: no need to repeat, install check SKIPPED
2019-Feb-15 15:38:11 :: [x86_64] #1500 openscada-plc: no need to repeat, install check SKIPPED
2019-Feb-15 15:38:18 :: [i586] #1500 openscada-plc: no need to repeat, install check SKIPPED
2019-Feb-15 15:38:30 :: [x86_64] #1500 openscada-server: no need to repeat, install check SKIPPED
2019-Feb-15 15:38:36 :: [i586] #1500 openscada-server: no need to repeat, install check SKIPPED
2019-Feb-15 15:38:51 :: [x86_64] #1500 openscada-visStation: no need to repeat, install check SKIPPED
2019-Feb-15 15:38:56 :: [i586] #1500 openscada-visStation: no need to repeat, install check SKIPPED
	x86_64: perl-JavaScript-V8=0.070-alt8 post-install unowned files:
/usr/lib64/perl5/JavaScript
/usr/lib64/perl5/auto/JavaScript
2019-Feb-15 15:39:10 :: [x86_64] #1600 perl-JavaScript-V8: no need to repeat, install check SKIPPED
	i586: perl-JavaScript-V8=0.070-alt8 post-install unowned files:
/usr/lib/perl5/JavaScript
/usr/lib/perl5/auto/JavaScript
2019-Feb-15 15:39:14 :: [i586] #1600 perl-JavaScript-V8: no need to repeat, install check SKIPPED
2019-Feb-15 15:39:28 :: [x86_64] #1600 perl-JavaScript-V8-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:39:33 :: [i586] #1600 perl-JavaScript-V8-debuginfo: no need to repeat, install check SKIPPED
	x86_64: qstopmotion=2.3.2-alt3 post-install unowned files:
/usr/share/icons/hicolor/128x128
/usr/share/icons/hicolor/128x128/apps
/usr/share/icons/hicolor/256x256
/usr/share/icons/hicolor/256x256/apps
/usr/share/icons/hicolor/scalable
/usr/share/icons/hicolor/scalable/apps
/usr/share/qstopmotion
2019-Feb-15 15:39:49 :: [x86_64] #2200 qstopmotion: no need to repeat, install check SKIPPED
	i586: qstopmotion=2.3.2-alt3 post-install unowned files:
/usr/share/icons/hicolor/128x128
/usr/share/icons/hicolor/128x128/apps
/usr/share/icons/hicolor/256x256
/usr/share/icons/hicolor/256x256/apps
/usr/share/icons/hicolor/scalable
/usr/share/icons/hicolor/scalable/apps
/usr/share/qstopmotion
2019-Feb-15 15:39:51 :: [i586] #2200 qstopmotion: no need to repeat, install check SKIPPED
2019-Feb-15 15:40:10 :: [x86_64] #2200 qstopmotion-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:40:11 :: [i586] #2200 qstopmotion-debuginfo: no need to repeat, install check SKIPPED
	i586: rxclient=1.0.0-alt2 post-install unowned files:
/usr/share/icons/hicolor/512x512
/usr/share/icons/hicolor/512x512/apps
/usr/share/icons/hicolor/512x512/mimetypes
2019-Feb-15 15:40:30 :: [i586] #2300 rxclient: no need to repeat, install check SKIPPED
	x86_64: rxclient=1.0.0-alt2 post-install unowned files:
/usr/share/icons/hicolor/512x512
/usr/share/icons/hicolor/512x512/apps
/usr/share/icons/hicolor/512x512/mimetypes
2019-Feb-15 15:40:31 :: [x86_64] #2300 rxclient: no need to repeat, install check SKIPPED
2019-Feb-15 15:40:49 :: [i586] #2300 rxclient-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:40:50 :: [x86_64] #2300 rxclient-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:41:08 :: [i586] #2400 sfxr-sdl: no need to repeat, install check SKIPPED
2019-Feb-15 15:41:11 :: [x86_64] #2400 sfxr-sdl: no need to repeat, install check SKIPPED
2019-Feb-15 15:41:28 :: [x86_64] #2400 sfxr-sdl-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:41:28 :: [i586] #2400 sfxr-sdl-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:41:42 :: [x86_64] #2600 verlihub: no need to repeat, install check SKIPPED
2019-Feb-15 15:41:48 :: [i586] #2600 verlihub: no need to repeat, install check SKIPPED
2019-Feb-15 15:41:58 :: [x86_64] #2600 verlihub-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:42:04 :: [i586] #2600 verlihub-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:42:17 :: [x86_64] #2700 xevil: no need to repeat, install check SKIPPED
2019-Feb-15 15:42:17 :: [i586] #2700 xevil: no need to repeat, install check SKIPPED
2019-Feb-15 15:42:34 :: [i586] #2700 xevil-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:42:37 :: [x86_64] #2700 xevil-debuginfo: no need to repeat, install check SKIPPED
2019-Feb-15 15:42:40 :: [x86_64-i586] plan: #51 +51 -51 =10810
2019-Feb-15 15:45:19 :: [x86_64-i586] arepo build OK
2019-Feb-15 15:45:37 :: [x86_64-i586] generated apt indices
2019-Feb-15 15:45:37 :: [x86_64-i586] created next repo
2019-Feb-15 15:45:45 :: [x86_64-i586] dependencies check OK
2019-Feb-15 15:45:52 :: gears inheritance check OK
2019-Feb-15 15:45:52 :: srpm inheritance check OK
girar-check-perms: access to arpage ALLOWED for mrdrew: project leader welcomes random builders
girar-check-perms: access to CGenius ALLOWED for mrdrew: project leader welcomes random builders
girar-check-perms: access to fbg ALLOWED for mrdrew: project leader welcomes random builders
girar-check-perms: access to cooldown ALLOWED for mrdrew: project leader welcomes random builders
girar-check-perms: access to kbookocr ALLOWED for mrdrew: project leader welcomes random builders
girar-check-perms: access to libplotmm ALLOWED for mrdrew: project is orphaned
girar-check-perms: access to lprof ALLOWED for mrdrew: project is orphaned
girar-check-perms: access to mirall ALLOWED for mrdrew: project leader welcomes random builders
girar-check-perms: access to openscada ALLOWED for mrdrew: project leader welcomes random builders
girar-check-perms: access to perl-JavaScript-V8 ALLOWED for mrdrew: project leader welcomes random builders
girar-check-perms: access to qstopmotion ALLOWED for mrdrew: project leader welcomes random builders
girar-check-perms: access to rxclient ALLOWED for mrdrew: project leader welcomes random builders
girar-check-perms: access to sfxr-sdl ALLOWED for mrdrew: project leader welcomes random builders
girar-check-perms: access to verlihub ALLOWED for mrdrew: project leader welcomes random builders
girar-check-perms: access to xevil ALLOWED for mrdrew: project leader welcomes random builders
2019-Feb-15 15:45:53 :: acl check OK
2019-Feb-15 15:46:23 :: created contents_index files
2019-Feb-15 15:46:33 :: created hash files: aarch64 i586 noarch src x86_64-i586 x86_64
2019-Feb-15 15:46:35 :: task #221224 for sisyphus TESTED
2019-Feb-15 15:46:35 :: task is ready for commit
2019-Feb-15 15:47:36 :: repo clone OK
2019-Feb-15 15:48:50 :: packages update OK
2019-Feb-15 15:49:37 :: [x86_64 i586 aarch64 noarch] update OK
2019-Feb-15 15:49:47 :: [x86_64-i586] update OK
2019-Feb-15 15:49:48 :: repo update OK
2019-Feb-15 15:51:34 :: repo save OK
2019-Feb-15 15:51:49 :: updated /srpms/C/CGenius.git branch `sisyphus'
2019-Feb-15 15:51:53 :: updated /srpms/a/arpage.git branch `sisyphus'
2019-Feb-15 15:51:54 :: updated /gears/c/cooldown.git branch `sisyphus'
2019-Feb-15 15:51:57 :: updated /srpms/f/fbg.git branch `sisyphus'
2019-Feb-15 15:51:58 :: updated /gears/k/kbookocr.git branch `sisyphus'
2019-Feb-15 15:51:58 :: updated /gears/l/libplotmm.git branch `sisyphus'
2019-Feb-15 15:51:58 :: updated /gears/l/lprof.git branch `sisyphus'
2019-Feb-15 15:51:59 :: updated /gears/m/mirall.git branch `sisyphus'
2019-Feb-15 15:52:00 :: updated /gears/o/openscada.git branch `sisyphus'
2019-Feb-15 15:52:31 :: updated /gears/p/perl-JavaScript-V8.git branch `sisyphus'
2019-Feb-15 15:52:32 :: updated /gears/q/qstopmotion.git branch `sisyphus'
2019-Feb-15 15:52:33 :: updated /gears/r/rxclient.git branch `sisyphus'
2019-Feb-15 15:52:34 :: updated /gears/s/sfxr-sdl.git branch `sisyphus'
2019-Feb-15 15:52:34 :: updated /gears/v/verlihub.git branch `sisyphus'
2019-Feb-15 15:52:36 :: updated /gears/x/xevil.git branch `sisyphus'
2019-Feb-15 15:53:48 :: gears update OK
2019-Feb-15 15:53:49 :: ACL for orphaned project `libplotmm' assigned to user `mrdrew'
2019-Feb-15 15:53:49 :: ACL for orphaned project `lprof' assigned to user `mrdrew'
girar-check-orphaned: acl file for repository `sisyphus' not available
girar-check-orphaned: acl file for repository `sisyphus' not available
2019-Feb-15 15:53:49 :: task #221224 for sisyphus DONE