[#242910] FAILED linuxcnc.git=2.7.14-alt3
Girar Builder awaiter robot
girar-builder at altlinux.org
Sat Dec 14 00:30:44 MSK 2019
http://git.altlinux.org/tasks/242910/logs/events.1.1.log
2019-Dec-13 21:16:26 :: task #242910 for sisyphus started by darktemplar:
#100 build 2.7.14-alt3 from /gears/l/linuxcnc.git fetched at 2019-Dec-13 11:33:01
2019-Dec-13 21:16:27 :: [i586] #100 linuxcnc.git 2.7.14-alt3: build start
2019-Dec-13 21:16:27 :: [ppc64le] #100 linuxcnc.git 2.7.14-alt3: build start
2019-Dec-13 21:16:27 :: [x86_64] #100 linuxcnc.git 2.7.14-alt3: build start
2019-Dec-13 21:16:27 :: [aarch64] #100 linuxcnc.git 2.7.14-alt3: build start
2019-Dec-13 21:16:42 :: [ppc64le] #100 linuxcnc.git 2.7.14-alt3: build SKIPPED
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags
130 | #error HAL needs RTAPI/ULAPI, check makefile and flags
cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed, trying c++ mode
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/canon.hh:17:10: fatal error: vector: No such file or directory
17 | #include <vector>
--
from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
--
from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags
130 | #error HAL needs RTAPI/ULAPI, check makefile and flags
--
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h:19:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
--
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h:41:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
2019-Dec-13 21:19:54 :: [x86_64] linuxcnc.git 2.7.14-alt3: remote: build failed
2019-Dec-13 21:19:54 :: [x86_64] #100 linuxcnc.git 2.7.14-alt3: build FAILED
2019-Dec-13 21:19:54 :: [x86_64] requesting cancellation of task processing
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:126:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags
130 | #error HAL needs RTAPI/ULAPI, check makefile and flags
cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h: cpp failed
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
cpp.req: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed, trying c++ mode
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/canon.hh:17:10: fatal error: vector: No such file or directory
17 | #include <vector>
--
from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
--
from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags
130 | #error HAL needs RTAPI/ULAPI, check makefile and flags
--
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h:19:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
--
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h:41:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
2019-Dec-13 21:20:11 :: [i586] linuxcnc.git 2.7.14-alt3: remote: build failed
2019-Dec-13 21:20:11 :: [i586] #100 linuxcnc.git 2.7.14-alt3: build FAILED
cpp.req: WARNING: /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h: cpp failed
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/canon.hh:17:10: fatal error: vector: No such file or directory
17 | #include <vector>
--
from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/gomath.h:23:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
--
from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/inihal.hh:22:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags
130 | #error HAL needs RTAPI/ULAPI, check makefile and flags
--
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h:19:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_io.h:24:10: fatal error: sys/io.h: No such file or directory
24 | #include <sys/io.h>
--
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_pci.h:41:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
--
from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:36:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/genserkins.h:37:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/hal.h:130:2: error: #error HAL needs RTAPI/ULAPI, check makefile and flags
130 | #error HAL needs RTAPI/ULAPI, check makefile and flags
--
In file included from /usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi_list.h:35:
/usr/src/tmp/linuxcnc-buildroot/usr/include/linuxcnc/rtapi.h:63:2: error: #error "Please define either RTAPI or ULAPI!"
63 | #error "Please define either RTAPI or ULAPI!"
2019-Dec-13 21:30:44 :: [aarch64] linuxcnc.git 2.7.14-alt3: remote: build failed
2019-Dec-13 21:30:44 :: [aarch64] #100 linuxcnc.git 2.7.14-alt3: build FAILED
2019-Dec-13 21:19:54 :: [x86_64] build FAILED
2019-Dec-13 21:20:11 :: [i586] build FAILED
2019-Dec-13 21:30:44 :: [aarch64] build FAILED
2019-Dec-13 21:30:44 :: task #242910 for sisyphus FAILED
More information about the Sisyphus-incominger
mailing list