[#213453] DONE (try 4) del=VTKLargeData del=vtk6.2 del=vtk-data6.2 ...
Girar Builder pender robot
girar-builder at altlinux.org
Wed Sep 26 17:09:42 MSK 2018
http://git.altlinux.org/tasks/archive/done/_208/213453/logs/events.4.2.log
2018-Sep-26 12:44:19 :: task #213453 for sisyphus resumed by root_ldv:
#100 delete VTKLargeData
#200 delete vtk6.2
#300 delete vtk-data6.2
#400 build libharu-2.3.0-alt2_3.src.rpm
#500 build 1.4.0-alt1 from /people/darktemplar/packages/gl2ps.git fetched at 2018-Sep-21 09:46:09
#600 build vtk-data8.1-8.1.1-alt1.src.rpm
#700 build 8.1.1-alt1 from /people/darktemplar/packages/vtk8.1.git fetched at 2018-Sep-21 09:49:20
#1000 build 3.3.1-alt2 from /people/darktemplar/packages/libmed.git fetched at 2018-Sep-24 13:49:31
#1100 build 0.17-alt5 from /people/darktemplar/packages/freecad.git fetched at 2018-Sep-24 13:52:54
#1200 build 6.0.0-alt1 from /people/darktemplar/packages/python-module-traitsui.git fetched at 2018-Sep-24 13:54:45
#1300 build 4.6.0-alt2 from /people/darktemplar/packages/python-module-traits.git fetched at 2018-Sep-24 13:54:53
#1400 build 6.0.0-alt1 from /people/darktemplar/packages/python-module-pyface.git fetched at 2018-Sep-24 13:55:07
#1500 build 4.6.2-alt1 from /people/darktemplar/packages/Mayavi.git fetched at 2018-Sep-24 14:05:00
2018-Sep-26 12:44:35 :: created build repo
2018-Sep-26 12:44:36 :: [x86_64] #400 libharu-2.3.0-alt2_3.src.rpm: build start
2018-Sep-26 12:44:36 :: [i586] #400 libharu-2.3.0-alt2_3.src.rpm: build start
2018-Sep-26 12:44:36 :: [aarch64] #400 libharu-2.3.0-alt2_3.src.rpm: build start
2018-Sep-26 12:45:10 :: [i586] libharu-2.3.0-alt2_3.src.rpm: remote: no need to rebuild
2018-Sep-26 12:45:10 :: [i586] #400 libharu-2.3.0-alt2_3.src.rpm: build OK
2018-Sep-26 12:45:10 :: [i586] #500 gl2ps.git 1.4.0-alt1: build start
2018-Sep-26 12:45:10 :: [x86_64] libharu-2.3.0-alt2_3.src.rpm: remote: no need to rebuild
2018-Sep-26 12:45:10 :: [x86_64] #400 libharu-2.3.0-alt2_3.src.rpm: build OK
2018-Sep-26 12:45:10 :: [x86_64] #500 gl2ps.git 1.4.0-alt1: build start
2018-Sep-26 12:45:31 :: [i586] gl2ps.git 1.4.0-alt1: remote: no need to rebuild
2018-Sep-26 12:45:31 :: [x86_64] gl2ps.git 1.4.0-alt1: remote: no need to rebuild
2018-Sep-26 12:45:31 :: [i586] #500 gl2ps.git 1.4.0-alt1: build OK
2018-Sep-26 12:45:31 :: [i586] #600 vtk-data8.1-8.1.1-alt1.src.rpm: build start
2018-Sep-26 12:45:32 :: [x86_64] #500 gl2ps.git 1.4.0-alt1: build OK
2018-Sep-26 12:45:32 :: [x86_64] #600 vtk-data8.1-8.1.1-alt1.src.rpm: build start
2018-Sep-26 12:46:02 :: [aarch64] libharu-2.3.0-alt2_3.src.rpm: remote: no need to rebuild
2018-Sep-26 12:46:02 :: [aarch64] #400 libharu-2.3.0-alt2_3.src.rpm: build OK
2018-Sep-26 12:46:02 :: [aarch64] #500 gl2ps.git 1.4.0-alt1: build start
2018-Sep-26 12:46:07 :: [i586] vtk-data8.1-8.1.1-alt1.src.rpm: remote: no need to rebuild
2018-Sep-26 12:46:07 :: [i586] #600 vtk-data8.1-8.1.1-alt1.src.rpm: build OK
2018-Sep-26 12:46:07 :: [i586] #700 vtk8.1.git 8.1.1-alt1: build start
2018-Sep-26 12:46:09 :: [x86_64] vtk-data8.1-8.1.1-alt1.src.rpm: remote: no need to rebuild
2018-Sep-26 12:46:09 :: [x86_64] #600 vtk-data8.1-8.1.1-alt1.src.rpm: build OK
2018-Sep-26 12:46:09 :: [x86_64] #700 vtk8.1.git 8.1.1-alt1: build start
2018-Sep-26 12:46:56 :: [i586] vtk8.1.git 8.1.1-alt1: remote: no need to rebuild
2018-Sep-26 12:46:56 :: [i586] #700 vtk8.1.git 8.1.1-alt1: build OK
2018-Sep-26 12:46:57 :: [i586] #1000 libmed.git 3.3.1-alt2: build start
2018-Sep-26 12:46:58 :: [x86_64] vtk8.1.git 8.1.1-alt1: remote: no need to rebuild
2018-Sep-26 12:46:58 :: [x86_64] #700 vtk8.1.git 8.1.1-alt1: build OK
2018-Sep-26 12:46:58 :: [x86_64] #1000 libmed.git 3.3.1-alt2: build start
2018-Sep-26 12:47:01 :: [aarch64] gl2ps.git 1.4.0-alt1: remote: no need to rebuild
2018-Sep-26 12:47:01 :: [aarch64] #500 gl2ps.git 1.4.0-alt1: build OK
2018-Sep-26 12:47:01 :: [aarch64] #600 vtk-data8.1-8.1.1-alt1.src.rpm: build start
2018-Sep-26 12:47:18 :: [i586] libmed.git 3.3.1-alt2: remote: no need to rebuild
2018-Sep-26 12:47:18 :: [i586] #1000 libmed.git 3.3.1-alt2: build OK
2018-Sep-26 12:47:18 :: [i586] #1100 freecad.git 0.17-alt5: build start
2018-Sep-26 12:47:20 :: [x86_64] libmed.git 3.3.1-alt2: remote: no need to rebuild
2018-Sep-26 12:47:20 :: [x86_64] #1000 libmed.git 3.3.1-alt2: build OK
2018-Sep-26 12:47:20 :: [x86_64] #1100 freecad.git 0.17-alt5: build start
2018-Sep-26 12:48:06 :: [i586] freecad.git 0.17-alt5: remote: no need to rebuild
2018-Sep-26 12:48:06 :: [i586] #1100 freecad.git 0.17-alt5: build OK
2018-Sep-26 12:48:06 :: [i586] #1200 python-module-traitsui.git 6.0.0-alt1: build start
2018-Sep-26 12:48:08 :: [x86_64] freecad.git 0.17-alt5: remote: no need to rebuild
2018-Sep-26 12:48:08 :: [x86_64] #1100 freecad.git 0.17-alt5: build OK
2018-Sep-26 12:48:08 :: [x86_64] #1200 python-module-traitsui.git 6.0.0-alt1: build start
2018-Sep-26 12:48:12 :: [aarch64] vtk-data8.1-8.1.1-alt1.src.rpm: remote: no need to rebuild
2018-Sep-26 12:48:12 :: [aarch64] #600 vtk-data8.1-8.1.1-alt1.src.rpm: build OK
2018-Sep-26 12:48:12 :: [aarch64] #700 vtk8.1.git 8.1.1-alt1: build start
2018-Sep-26 12:48:46 :: [i586] python-module-traitsui.git 6.0.0-alt1: remote: no need to rebuild
2018-Sep-26 12:48:46 :: [i586] #1200 python-module-traitsui.git 6.0.0-alt1: build OK
2018-Sep-26 12:48:46 :: [i586] #1300 python-module-traits.git 4.6.0-alt2: build start
2018-Sep-26 12:48:47 :: [x86_64] python-module-traitsui.git 6.0.0-alt1: remote: no need to rebuild
2018-Sep-26 12:48:47 :: [x86_64] #1200 python-module-traitsui.git 6.0.0-alt1: build OK
2018-Sep-26 12:48:47 :: [x86_64] #1300 python-module-traits.git 4.6.0-alt2: build start
2018-Sep-26 12:49:29 :: [x86_64] python-module-traits.git 4.6.0-alt2: remote: no need to rebuild
2018-Sep-26 12:49:29 :: [x86_64] #1300 python-module-traits.git 4.6.0-alt2: build OK
2018-Sep-26 12:49:29 :: [x86_64] #1400 python-module-pyface.git 6.0.0-alt1: build start
2018-Sep-26 12:49:29 :: [i586] python-module-traits.git 4.6.0-alt2: remote: no need to rebuild
2018-Sep-26 12:49:29 :: [i586] #1300 python-module-traits.git 4.6.0-alt2: build OK
2018-Sep-26 12:49:29 :: [i586] #1400 python-module-pyface.git 6.0.0-alt1: build start
2018-Sep-26 12:49:46 :: [aarch64] vtk8.1.git 8.1.1-alt1: remote: no need to rebuild
2018-Sep-26 12:49:46 :: [aarch64] #700 vtk8.1.git 8.1.1-alt1: build OK
2018-Sep-26 12:49:46 :: [aarch64] #1000 libmed.git 3.3.1-alt2: build start
2018-Sep-26 12:49:51 :: [i586] python-module-pyface.git 6.0.0-alt1: remote: no need to rebuild
2018-Sep-26 12:49:51 :: [x86_64] python-module-pyface.git 6.0.0-alt1: remote: no need to rebuild
2018-Sep-26 12:49:51 :: [i586] #1400 python-module-pyface.git 6.0.0-alt1: build OK
2018-Sep-26 12:49:51 :: [i586] #1500 Mayavi.git 4.6.2-alt1: build start
2018-Sep-26 12:49:51 :: [x86_64] #1400 python-module-pyface.git 6.0.0-alt1: build OK
2018-Sep-26 12:49:51 :: [x86_64] #1500 Mayavi.git 4.6.2-alt1: build start
2018-Sep-26 12:50:13 :: [x86_64] Mayavi.git 4.6.2-alt1: remote: no need to rebuild
2018-Sep-26 12:50:14 :: [i586] Mayavi.git 4.6.2-alt1: remote: no need to rebuild
2018-Sep-26 12:50:14 :: [x86_64] #1500 Mayavi.git 4.6.2-alt1: build OK
2018-Sep-26 12:50:14 :: [i586] #1500 Mayavi.git 4.6.2-alt1: build OK
2018-Sep-26 12:50:43 :: [aarch64] libmed.git 3.3.1-alt2: remote: no need to rebuild
2018-Sep-26 12:50:44 :: [aarch64] #1000 libmed.git 3.3.1-alt2: build OK
2018-Sep-26 12:50:44 :: [aarch64] #1100 freecad.git 0.17-alt5: build start
2018-Sep-26 12:52:07 :: [aarch64] freecad.git 0.17-alt5: remote: no need to rebuild
2018-Sep-26 12:52:07 :: [aarch64] #1100 freecad.git 0.17-alt5: build OK
2018-Sep-26 12:52:07 :: [aarch64] #1200 python-module-traitsui.git 6.0.0-alt1: build start
2018-Sep-26 12:53:49 :: [aarch64] python-module-traitsui.git 6.0.0-alt1: remote: no need to rebuild
2018-Sep-26 12:53:49 :: [aarch64] #1200 python-module-traitsui.git 6.0.0-alt1: build OK
2018-Sep-26 12:53:49 :: [aarch64] #1300 python-module-traits.git 4.6.0-alt2: build start
2018-Sep-26 12:55:39 :: [aarch64] python-module-traits.git 4.6.0-alt2: remote: no need to rebuild
2018-Sep-26 12:55:39 :: [aarch64] #1300 python-module-traits.git 4.6.0-alt2: build OK
2018-Sep-26 12:55:39 :: [aarch64] #1400 python-module-pyface.git 6.0.0-alt1: build start
2018-Sep-26 12:56:39 :: [aarch64] python-module-pyface.git 6.0.0-alt1: remote: no need to rebuild
2018-Sep-26 12:56:39 :: [aarch64] #1400 python-module-pyface.git 6.0.0-alt1: build OK
2018-Sep-26 12:56:39 :: [aarch64] #1500 Mayavi.git 4.6.2-alt1: build start
2018-Sep-26 12:57:41 :: [aarch64] Mayavi.git 4.6.2-alt1: remote: no need to rebuild
2018-Sep-26 12:57:41 :: [aarch64] #1500 Mayavi.git 4.6.2-alt1: build OK
2018-Sep-26 13:01:30 :: build check OK
2018-Sep-26 13:14:46 :: noarch check OK
2018-Sep-26 13:14:48 :: plan: src +10 -11 =18671, aarch64 +48 -30 =29484, i586 +48 -44 =33947, noarch +12 -14 =19118, x86_64 +48 -44 =34016
2018-Sep-26 13:14:48 :: version check OK
2018-Sep-26 13:15:50 :: generated apt indices
2018-Sep-26 13:15:50 :: created next repo
aarch64: old unmet dependencies resolved:
python-module-Enable#4.6.1-alt1 python2.7(tvtk)
python-module-modepy-pickles#2013.3-alt1.git20140704.1.2 python2.7(mayavi)
2018-Sep-26 13:16:14 :: dependencies check OK
2018-Sep-26 13:16:53 :: ELF symbols check OK
2018-Sep-26 13:17:29 :: [i586] #1500 Mayavi: no need to repeat, install check SKIPPED
2018-Sep-26 13:17:29 :: [x86_64] #1500 Mayavi: no need to repeat, install check SKIPPED
2018-Sep-26 13:17:41 :: [i586] #1500 Mayavi-doc: no need to repeat, install check SKIPPED
2018-Sep-26 13:17:42 :: [x86_64] #1500 Mayavi-doc: no need to repeat, install check SKIPPED
i586: freecad=1:0.17-alt5 post-install unowned files:
/usr/share/icons/hicolor/scalable
/usr/share/icons/hicolor/scalable/apps
2018-Sep-26 13:17:55 :: [i586] #1100 freecad: no need to repeat, install check SKIPPED
x86_64: freecad=1:0.17-alt5 post-install unowned files:
/usr/share/icons/hicolor/scalable
/usr/share/icons/hicolor/scalable/apps
2018-Sep-26 13:17:56 :: [x86_64] #1100 freecad: no need to repeat, install check SKIPPED
2018-Sep-26 13:18:03 :: [aarch64] #1500 Mayavi: no need to repeat, install check SKIPPED
2018-Sep-26 13:18:11 :: [i586] #1100 freecad-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:18:11 :: [x86_64] #1100 freecad-debuginfo: no need to repeat, install check SKIPPED
i586: freecad-docs=1:0.17-alt5 post-install unowned files:
/usr/lib/freecad
2018-Sep-26 13:18:24 :: [i586] #1100 freecad-docs: no need to repeat, install check SKIPPED
x86_64: freecad-docs=1:0.17-alt5 post-install unowned files:
/usr/lib64/freecad
2018-Sep-26 13:18:25 :: [x86_64] #1100 freecad-docs: no need to repeat, install check SKIPPED
2018-Sep-26 13:18:38 :: [i586] #500 libgl2ps: no need to repeat, install check SKIPPED
2018-Sep-26 13:18:39 :: [aarch64] #1500 Mayavi-doc: no need to repeat, install check SKIPPED
2018-Sep-26 13:18:39 :: [x86_64] #500 libgl2ps: no need to repeat, install check SKIPPED
2018-Sep-26 13:18:53 :: [i586] #500 libgl2ps-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:18:53 :: [x86_64] #500 libgl2ps-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:19:07 :: [i586] #500 libgl2ps-devel: no need to repeat, install check SKIPPED
2018-Sep-26 13:19:07 :: [x86_64] #500 libgl2ps-devel: no need to repeat, install check SKIPPED
2018-Sep-26 13:19:20 :: [i586] #500 libgl2ps-devel-doc: no need to repeat, install check SKIPPED
2018-Sep-26 13:19:21 :: [x86_64] #500 libgl2ps-devel-doc: no need to repeat, install check SKIPPED
aarch64: freecad=1:0.17-alt5 post-install unowned files:
/usr/share/icons/hicolor/scalable
/usr/share/icons/hicolor/scalable/apps
2018-Sep-26 13:19:22 :: [aarch64] #1100 freecad: no need to repeat, install check SKIPPED
2018-Sep-26 13:19:34 :: [x86_64] #400 libharu: no need to repeat, install check SKIPPED
2018-Sep-26 13:19:34 :: [i586] #400 libharu: no need to repeat, install check SKIPPED
2018-Sep-26 13:19:47 :: [i586] #400 libharu-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:19:48 :: [x86_64] #400 libharu-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:20:00 :: [i586] #400 libharu-devel: no need to repeat, install check SKIPPED
2018-Sep-26 13:20:02 :: [x86_64] #400 libharu-devel: no need to repeat, install check SKIPPED
2018-Sep-26 13:20:06 :: [aarch64] #1100 freecad-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:20:13 :: [i586] #1000 libmed: no need to repeat, install check SKIPPED
2018-Sep-26 13:20:15 :: [x86_64] #1000 libmed: no need to repeat, install check SKIPPED
2018-Sep-26 13:20:26 :: [i586] #1000 libmed-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:20:28 :: [x86_64] #1000 libmed-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:20:39 :: [i586] #1000 libmed-devel: no need to repeat, install check SKIPPED
2018-Sep-26 13:20:42 :: [x86_64] #1000 libmed-devel: no need to repeat, install check SKIPPED
aarch64: freecad-docs=1:0.17-alt5 post-install unowned files:
/usr/lib64/freecad
2018-Sep-26 13:20:47 :: [aarch64] #1100 freecad-docs: no need to repeat, install check SKIPPED
2018-Sep-26 13:20:52 :: [i586] #1000 libmed-tools: no need to repeat, install check SKIPPED
2018-Sep-26 13:20:55 :: [x86_64] #1000 libmed-tools: no need to repeat, install check SKIPPED
2018-Sep-26 13:21:05 :: [i586] #1000 libmed-tools-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:21:09 :: [x86_64] #1000 libmed-tools-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:21:18 :: [i586] #700 libvtk8.1: no need to repeat, install check SKIPPED
2018-Sep-26 13:21:23 :: [aarch64] #500 libgl2ps: no need to repeat, install check SKIPPED
2018-Sep-26 13:21:23 :: [x86_64] #700 libvtk8.1: no need to repeat, install check SKIPPED
2018-Sep-26 13:21:31 :: [i586] #700 libvtk8.1-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:21:37 :: [x86_64] #700 libvtk8.1-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:21:45 :: [i586] #700 libvtk8.1-devel: no need to repeat, install check SKIPPED
2018-Sep-26 13:21:51 :: [x86_64] #700 libvtk8.1-devel: no need to repeat, install check SKIPPED
2018-Sep-26 13:21:58 :: [aarch64] #500 libgl2ps-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:21:58 :: [i586] #700 libvtk8.1-python: no need to repeat, install check SKIPPED
2018-Sep-26 13:22:05 :: [x86_64] #700 libvtk8.1-python: no need to repeat, install check SKIPPED
2018-Sep-26 13:22:12 :: [i586] #700 libvtk8.1-python-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:22:20 :: [x86_64] #700 libvtk8.1-python-debuginfo: no need to repeat, install check SKIPPED
i586: libvtk8.1-python-devel=8.1.1-alt1 post-install unowned files:
/usr/include/vtk-8.1
/usr/lib/cmake
/usr/lib/cmake/vtk-8.1
2018-Sep-26 13:22:26 :: [i586] #700 libvtk8.1-python-devel: no need to repeat, install check SKIPPED
x86_64: libvtk8.1-python-devel=8.1.1-alt1 post-install unowned files:
/usr/include/vtk-8.1
/usr/lib64/cmake
/usr/lib64/cmake/vtk-8.1
2018-Sep-26 13:22:34 :: [x86_64] #700 libvtk8.1-python-devel: no need to repeat, install check SKIPPED
2018-Sep-26 13:22:35 :: [aarch64] #500 libgl2ps-devel: no need to repeat, install check SKIPPED
2018-Sep-26 13:22:41 :: [i586] #700 libvtk8.1-tcl: no need to repeat, install check SKIPPED
2018-Sep-26 13:22:47 :: [x86_64] #700 libvtk8.1-tcl: no need to repeat, install check SKIPPED
2018-Sep-26 13:22:55 :: [i586] #700 libvtk8.1-tcl-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:23:02 :: [x86_64] #700 libvtk8.1-tcl-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:23:08 :: [i586] #700 libvtk8.1-tcl-devel: no need to repeat, install check SKIPPED
2018-Sep-26 13:23:13 :: [aarch64] #500 libgl2ps-devel-doc: no need to repeat, install check SKIPPED
2018-Sep-26 13:23:16 :: [x86_64] #700 libvtk8.1-tcl-devel: no need to repeat, install check SKIPPED
2018-Sep-26 13:23:22 :: [i586] #1500 python-module-mayavi: no need to repeat, install check SKIPPED
2018-Sep-26 13:23:31 :: [x86_64] #1500 python-module-mayavi: no need to repeat, install check SKIPPED
2018-Sep-26 13:23:36 :: [i586] #1500 python-module-mayavi.tests: no need to repeat, install check SKIPPED
2018-Sep-26 13:23:45 :: [x86_64] #1500 python-module-mayavi.tests: no need to repeat, install check SKIPPED
warning [i586]: python-module-pyface=6.0.0-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-traits=4.6.0-alt2 python-module-traitsui=6.0.0-alt1 python-module-tvtk=4.6.2-alt1
i586: python-module-pyface=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-26 13:23:51 :: [i586] #1400 python-module-pyface: no need to repeat, install check SKIPPED
2018-Sep-26 13:23:52 :: [aarch64] #400 libharu: no need to repeat, install check SKIPPED
warning [x86_64]: python-module-pyface=6.0.0-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-traits=4.6.0-alt2 python-module-traitsui=6.0.0-alt1 python-module-tvtk=4.6.2-alt1
x86_64: python-module-pyface=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-26 13:24:00 :: [x86_64] #1400 python-module-pyface: no need to repeat, install check SKIPPED
2018-Sep-26 13:24:03 :: [i586] #1400 python-module-pyface-docs: no need to repeat, install check SKIPPED
2018-Sep-26 13:24:14 :: [x86_64] #1400 python-module-pyface-docs: no need to repeat, install check SKIPPED
i586: python-module-pyface-pickles=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/pyface
2018-Sep-26 13:24:17 :: [i586] #1400 python-module-pyface-pickles: no need to repeat, install check SKIPPED
x86_64: python-module-pyface-pickles=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/pyface
2018-Sep-26 13:24:29 :: [x86_64] #1400 python-module-pyface-pickles: no need to repeat, install check SKIPPED
2018-Sep-26 13:24:30 :: [aarch64] #400 libharu-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:24:31 :: [i586] #1400 python-module-pyface-tests: no need to repeat, install check SKIPPED
2018-Sep-26 13:24:43 :: [x86_64] #1400 python-module-pyface-tests: no need to repeat, install check SKIPPED
warning [i586]: python-module-traits=4.6.0-alt2: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traitsui=6.0.0-alt1 python-module-tvtk=4.6.2-alt1
i586: python-module-traits=4.6.0-alt2 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-26 13:24:45 :: [i586] #1300 python-module-traits: no need to repeat, install check SKIPPED
warning [x86_64]: python-module-traits=4.6.0-alt2: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traitsui=6.0.0-alt1 python-module-tvtk=4.6.2-alt1
x86_64: python-module-traits=4.6.0-alt2 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-26 13:24:58 :: [x86_64] #1300 python-module-traits: no need to repeat, install check SKIPPED
2018-Sep-26 13:24:58 :: [i586] #1300 python-module-traits-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:25:11 :: [i586] #1300 python-module-traits-doc: no need to repeat, install check SKIPPED
2018-Sep-26 13:25:12 :: [aarch64] #400 libharu-devel: no need to repeat, install check SKIPPED
2018-Sep-26 13:25:13 :: [x86_64] #1300 python-module-traits-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:25:26 :: [i586] #1300 python-module-traits-pickles: no need to repeat, install check SKIPPED
2018-Sep-26 13:25:26 :: [x86_64] #1300 python-module-traits-doc: no need to repeat, install check SKIPPED
2018-Sep-26 13:25:39 :: [i586] #1300 python-module-traits-tests: no need to repeat, install check SKIPPED
2018-Sep-26 13:25:40 :: [x86_64] #1300 python-module-traits-pickles: no need to repeat, install check SKIPPED
2018-Sep-26 13:25:49 :: [aarch64] #1000 libmed: no need to repeat, install check SKIPPED
warning [i586]: python-module-traitsui=6.0.0-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traits=4.6.0-alt2 python-module-tvtk=4.6.2-alt1
i586: python-module-traitsui=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-26 13:25:54 :: [i586] #1200 python-module-traitsui: no need to repeat, install check SKIPPED
2018-Sep-26 13:25:54 :: [x86_64] #1300 python-module-traits-tests: no need to repeat, install check SKIPPED
2018-Sep-26 13:26:08 :: [i586] #1200 python-module-traitsui-tests: no need to repeat, install check SKIPPED
warning [x86_64]: python-module-traitsui=6.0.0-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traits=4.6.0-alt2 python-module-tvtk=4.6.2-alt1
x86_64: python-module-traitsui=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-26 13:26:09 :: [x86_64] #1200 python-module-traitsui: no need to repeat, install check SKIPPED
warning [i586]: python-module-tvtk=4.6.2-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traits=4.6.0-alt2 python-module-traitsui=6.0.0-alt1
i586: python-module-tvtk=4.6.2-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-26 13:26:22 :: [i586] #1500 python-module-tvtk: no need to repeat, install check SKIPPED
2018-Sep-26 13:26:24 :: [x86_64] #1200 python-module-traitsui-tests: no need to repeat, install check SKIPPED
2018-Sep-26 13:26:28 :: [aarch64] #1000 libmed-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:26:36 :: [i586] #1500 python-module-tvtk-debuginfo: no need to repeat, install check SKIPPED
warning [x86_64]: python-module-tvtk=4.6.2-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traits=4.6.0-alt2 python-module-traitsui=6.0.0-alt1
x86_64: python-module-tvtk=4.6.2-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-26 13:26:38 :: [x86_64] #1500 python-module-tvtk: no need to repeat, install check SKIPPED
2018-Sep-26 13:26:50 :: [i586] #1500 python-module-tvtk.tests: no need to repeat, install check SKIPPED
2018-Sep-26 13:26:53 :: [x86_64] #1500 python-module-tvtk-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:27:03 :: [i586] #700 python-module-vtk8.1: no need to repeat, install check SKIPPED
2018-Sep-26 13:27:07 :: [aarch64] #1000 libmed-devel: no need to repeat, install check SKIPPED
2018-Sep-26 13:27:07 :: [x86_64] #1500 python-module-tvtk.tests: no need to repeat, install check SKIPPED
2018-Sep-26 13:27:18 :: [i586] #700 python-module-vtk8.1-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:27:24 :: [x86_64] #700 python-module-vtk8.1: no need to repeat, install check SKIPPED
2018-Sep-26 13:27:32 :: [i586] #700 python-module-vtk8.1-tests: no need to repeat, install check SKIPPED
2018-Sep-26 13:27:42 :: [x86_64] #700 python-module-vtk8.1-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:27:45 :: [i586] #600 vtk-data8.1: no need to repeat, install check SKIPPED
2018-Sep-26 13:27:45 :: [aarch64] #1000 libmed-tools: no need to repeat, install check SKIPPED
2018-Sep-26 13:27:56 :: [x86_64] #700 python-module-vtk8.1-tests: no need to repeat, install check SKIPPED
2018-Sep-26 13:27:58 :: [i586] #700 vtk8.1: no need to repeat, install check SKIPPED
2018-Sep-26 13:28:10 :: [x86_64] #600 vtk-data8.1: no need to repeat, install check SKIPPED
2018-Sep-26 13:28:12 :: [i586] #700 vtk8.1-data: no need to repeat, install check SKIPPED
2018-Sep-26 13:28:23 :: [aarch64] #1000 libmed-tools-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:28:24 :: [x86_64] #700 vtk8.1: no need to repeat, install check SKIPPED
2018-Sep-26 13:28:26 :: [i586] #700 vtk8.1-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:28:39 :: [x86_64] #700 vtk8.1-data: no need to repeat, install check SKIPPED
2018-Sep-26 13:28:39 :: [i586] #700 vtk8.1-doc: no need to repeat, install check SKIPPED
2018-Sep-26 13:28:53 :: [x86_64] #700 vtk8.1-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:28:53 :: [i586] #700 vtk8.1-examples: no need to repeat, install check SKIPPED
2018-Sep-26 13:28:59 :: [aarch64] #700 libvtk8.1: no need to repeat, install check SKIPPED
2018-Sep-26 13:29:07 :: [x86_64] #700 vtk8.1-doc: no need to repeat, install check SKIPPED
2018-Sep-26 13:29:07 :: [i586] #700 vtk8.1-examples-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:29:21 :: [x86_64] #700 vtk8.1-examples: no need to repeat, install check SKIPPED
2018-Sep-26 13:29:22 :: [i586] #700 vtk8.1-python: no need to repeat, install check SKIPPED
2018-Sep-26 13:29:35 :: [x86_64] #700 vtk8.1-examples-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:29:36 :: [i586] #700 vtk8.1-python-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:29:39 :: [aarch64] #700 libvtk8.1-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:29:49 :: [i586] #700 vtk8.1-qt5-designer-plugin: no need to repeat, install check SKIPPED
2018-Sep-26 13:29:50 :: [x86_64] #700 vtk8.1-python: no need to repeat, install check SKIPPED
2018-Sep-26 13:30:04 :: [i586] #700 vtk8.1-qt5-designer-plugin-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:30:04 :: [x86_64] #700 vtk8.1-python-debuginfo: no need to repeat, install check SKIPPED
i586: vtk8.1-tcl=8.1.1-alt1 post-install unowned files:
/usr/lib/tcltk
2018-Sep-26 13:30:17 :: [i586] #700 vtk8.1-tcl: no need to repeat, install check SKIPPED
2018-Sep-26 13:30:17 :: [aarch64] #700 libvtk8.1-devel: no need to repeat, install check SKIPPED
2018-Sep-26 13:30:19 :: [x86_64] #700 vtk8.1-qt5-designer-plugin: no need to repeat, install check SKIPPED
2018-Sep-26 13:30:32 :: [i586] #700 vtk8.1-tcl-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:30:32 :: [x86_64] #700 vtk8.1-qt5-designer-plugin-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:30:45 :: [i586] #700 vtk8.1-tests: no need to repeat, install check SKIPPED
x86_64: vtk8.1-tcl=8.1.1-alt1 post-install unowned files:
/usr/lib/tcltk
2018-Sep-26 13:30:46 :: [x86_64] #700 vtk8.1-tcl: no need to repeat, install check SKIPPED
2018-Sep-26 13:30:56 :: [aarch64] #700 libvtk8.1-python: no need to repeat, install check SKIPPED
2018-Sep-26 13:30:59 :: [i586] #700 vtk8.1-tests-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:31:01 :: [x86_64] #700 vtk8.1-tcl-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:31:14 :: [x86_64] #700 vtk8.1-tests: no need to repeat, install check SKIPPED
2018-Sep-26 13:31:29 :: [x86_64] #700 vtk8.1-tests-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:31:34 :: [aarch64] #700 libvtk8.1-python-debuginfo: no need to repeat, install check SKIPPED
aarch64: libvtk8.1-python-devel=8.1.1-alt1 post-install unowned files:
/usr/include/vtk-8.1
/usr/lib64/cmake
/usr/lib64/cmake/vtk-8.1
2018-Sep-26 13:32:11 :: [aarch64] #700 libvtk8.1-python-devel: no need to repeat, install check SKIPPED
2018-Sep-26 13:32:47 :: [aarch64] #700 libvtk8.1-tcl: no need to repeat, install check SKIPPED
2018-Sep-26 13:33:26 :: [aarch64] #700 libvtk8.1-tcl-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:34:06 :: [aarch64] #700 libvtk8.1-tcl-devel: no need to repeat, install check SKIPPED
2018-Sep-26 13:34:46 :: [aarch64] #1500 python-module-mayavi: no need to repeat, install check SKIPPED
2018-Sep-26 13:35:25 :: [aarch64] #1500 python-module-mayavi.tests: no need to repeat, install check SKIPPED
warning [aarch64]: python-module-pyface=6.0.0-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-traits=4.6.0-alt2 python-module-traitsui=6.0.0-alt1 python-module-tvtk=4.6.2-alt1
aarch64: python-module-pyface=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-26 13:36:05 :: [aarch64] #1400 python-module-pyface: no need to repeat, install check SKIPPED
2018-Sep-26 13:36:43 :: [aarch64] #1400 python-module-pyface-docs: no need to repeat, install check SKIPPED
aarch64: python-module-pyface-pickles=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/pyface
2018-Sep-26 13:37:22 :: [aarch64] #1400 python-module-pyface-pickles: no need to repeat, install check SKIPPED
2018-Sep-26 13:38:01 :: [aarch64] #1400 python-module-pyface-tests: no need to repeat, install check SKIPPED
warning [aarch64]: python-module-traits=4.6.0-alt2: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traitsui=6.0.0-alt1 python-module-tvtk=4.6.2-alt1
aarch64: python-module-traits=4.6.0-alt2 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-26 13:38:40 :: [aarch64] #1300 python-module-traits: no need to repeat, install check SKIPPED
2018-Sep-26 13:39:19 :: [aarch64] #1300 python-module-traits-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:39:56 :: [aarch64] #1300 python-module-traits-doc: no need to repeat, install check SKIPPED
2018-Sep-26 13:40:35 :: [aarch64] #1300 python-module-traits-pickles: no need to repeat, install check SKIPPED
2018-Sep-26 13:41:14 :: [aarch64] #1300 python-module-traits-tests: no need to repeat, install check SKIPPED
warning [aarch64]: python-module-traitsui=6.0.0-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traits=4.6.0-alt2 python-module-tvtk=4.6.2-alt1
aarch64: python-module-traitsui=6.0.0-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-26 13:41:54 :: [aarch64] #1200 python-module-traitsui: no need to repeat, install check SKIPPED
2018-Sep-26 13:42:34 :: [aarch64] #1200 python-module-traitsui-tests: no need to repeat, install check SKIPPED
warning [aarch64]: python-module-tvtk=4.6.2-alt1: circular dependencies on python-module-BlockCanvas=4.0.3-alt3.git20130328 python-module-Chaco=4.6.0-alt1.dev.git20150427 python-module-CodeTools=4.3.0-alt1.git20150105 python-module-ETSDevTools=4.0.2-alt1.git20130328 python-module-Enable=4.6.1-alt1 python-module-SciMath=4.1.2-alt2.git20141125 python-module-apptools-tests=4.4.0-alt2 python-module-apptools=4.4.0-alt2 python-module-envisage=4.5.0-alt1.git20150428 python-module-pyface=6.0.0-alt1 python-module-traits=4.6.0-alt2 python-module-traitsui=6.0.0-alt1
aarch64: python-module-tvtk=4.6.2-alt1 post-install unowned files:
/usr/lib/python2.7/site-packages/etsdevtools
/usr/lib/python2.7/site-packages/etsdevtools-4.0.2-py2.7.egg-info
2018-Sep-26 13:43:13 :: [aarch64] #1500 python-module-tvtk: no need to repeat, install check SKIPPED
2018-Sep-26 13:43:53 :: [aarch64] #1500 python-module-tvtk-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:44:35 :: [aarch64] #1500 python-module-tvtk.tests: no need to repeat, install check SKIPPED
2018-Sep-26 13:45:14 :: [aarch64] #700 python-module-vtk8.1: no need to repeat, install check SKIPPED
2018-Sep-26 13:45:54 :: [aarch64] #700 python-module-vtk8.1-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:46:34 :: [aarch64] #700 python-module-vtk8.1-tests: no need to repeat, install check SKIPPED
2018-Sep-26 13:47:17 :: [aarch64] #600 vtk-data8.1: no need to repeat, install check SKIPPED
2018-Sep-26 13:48:00 :: [aarch64] #700 vtk8.1: no need to repeat, install check SKIPPED
2018-Sep-26 13:48:39 :: [aarch64] #700 vtk8.1-data: no need to repeat, install check SKIPPED
2018-Sep-26 13:49:21 :: [aarch64] #700 vtk8.1-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:50:02 :: [aarch64] #700 vtk8.1-doc: no need to repeat, install check SKIPPED
2018-Sep-26 13:50:40 :: [aarch64] #700 vtk8.1-examples: no need to repeat, install check SKIPPED
2018-Sep-26 13:51:17 :: [aarch64] #700 vtk8.1-examples-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:51:59 :: [aarch64] #700 vtk8.1-python: no need to repeat, install check SKIPPED
2018-Sep-26 13:52:39 :: [aarch64] #700 vtk8.1-python-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:53:20 :: [aarch64] #700 vtk8.1-qt5-designer-plugin: no need to repeat, install check SKIPPED
2018-Sep-26 13:54:02 :: [aarch64] #700 vtk8.1-qt5-designer-plugin-debuginfo: no need to repeat, install check SKIPPED
aarch64: vtk8.1-tcl=8.1.1-alt1 post-install unowned files:
/usr/lib/tcltk
2018-Sep-26 13:54:39 :: [aarch64] #700 vtk8.1-tcl: no need to repeat, install check SKIPPED
2018-Sep-26 13:55:23 :: [aarch64] #700 vtk8.1-tcl-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:56:05 :: [aarch64] #700 vtk8.1-tests: no need to repeat, install check SKIPPED
2018-Sep-26 13:56:43 :: [aarch64] #700 vtk8.1-tests-debuginfo: no need to repeat, install check SKIPPED
2018-Sep-26 13:56:57 :: [x86_64-i586] plan: #17 +17 -17 =11370
2018-Sep-26 13:59:17 :: [x86_64-i586] arepo build OK
2018-Sep-26 13:59:39 :: [x86_64-i586] generated apt indices
2018-Sep-26 13:59:39 :: [x86_64-i586] created next repo
2018-Sep-26 13:59:48 :: [x86_64-i586] dependencies check OK
2018-Sep-26 13:59:53 :: gears inheritance check OK
2018-Sep-26 13:59:53 :: srpm inheritance check OK
girar-check-perms: access to VTKLargeData ALLOWED for darktemplar: project is orphaned
girar-check-perms: access to vtk6.2 ALLOWED for darktemplar: project leader
girar-check-perms: access to vtk-data6.2 ALLOWED for darktemplar: project is orphaned
girar-check-perms: access to libharu ALLOWED for darktemplar: project leader welcomes random builders
girar-check-perms: access to gl2ps ALLOWED for darktemplar: project leader welcomes random builders
girar-check-perms: access to vtk-data8.1 ALLOWED for darktemplar: project `vtk-data8.1' is not listed in acl file for repository `sisyphus'
girar-check-perms: access to vtk8.1 ALLOWED for darktemplar: project `vtk8.1' is not listed in acl file for repository `sisyphus'
girar-check-perms: access to libmed ALLOWED for darktemplar: project leader welcomes random builders
girar-check-perms: access to freecad ALLOWED for darktemplar: project leader welcomes random builders
girar-check-perms: access to python-module-traitsui ALLOWED for darktemplar: project leader welcomes random builders
girar-check-perms: access to python-module-traits ALLOWED for darktemplar: project leader welcomes random builders
girar-check-perms: access to python-module-pyface ALLOWED for darktemplar: project leader welcomes random builders
girar-check-perms: access to Mayavi ALLOWED for darktemplar: project is orphaned
2018-Sep-26 13:59:54 :: acl check OK
2018-Sep-26 14:00:24 :: created contents_index files
2018-Sep-26 14:00:40 :: created hash files: aarch64 i586 noarch src x86_64-i586 x86_64
2018-Sep-26 14:00:42 :: task #213453 for sisyphus TESTED
2018-Sep-26 14:00:42 :: task is ready for commit
2018-Sep-26 14:01:19 :: repo clone OK
2018-Sep-26 14:02:25 :: packages update OK
2018-Sep-26 14:03:16 :: [x86_64 i586 aarch64 noarch] update OK
2018-Sep-26 14:03:39 :: [x86_64-i586] update OK
2018-Sep-26 14:03:39 :: repo update OK
2018-Sep-26 14:05:15 :: repo save OK
2018-Sep-26 14:05:16 :: updated /gears/M/Mayavi.git branch `sisyphus'
2018-Sep-26 14:05:21 :: updated /gears/f/freecad.git branch `sisyphus'
2018-Sep-26 14:05:41 :: updated /gears/g/gl2ps.git branch `sisyphus'
2018-Sep-26 14:05:43 :: updated /srpms/l/libharu.git branch `sisyphus'
2018-Sep-26 14:05:43 :: updated /gears/l/libmed.git branch `sisyphus'
2018-Sep-26 14:05:46 :: created /gears/p/python-module-pyface.git branch `sisyphus'
2018-Sep-26 14:05:47 :: updated /gears/p/python-module-traits.git branch `sisyphus'
2018-Sep-26 14:05:50 :: updated /gears/p/python-module-traitsui.git branch `sisyphus'
2018-Sep-26 14:07:41 :: created /srpms/v/vtk-data8.1.git branch `sisyphus'
2018-Sep-26 14:08:20 :: created /gears/v/vtk8.1.git branch `sisyphus'
2018-Sep-26 14:08:32 :: saved /gears/V/VTKLargeData.git branch `sisyphus' as `old/sisyphus-task213453'
2018-Sep-26 14:08:32 :: removed /gears/V/VTKLargeData.git branch `sisyphus'
2018-Sep-26 14:08:32 :: saved /gears/v/vtk-data6.2.git branch `sisyphus' as `old/sisyphus-task213453'
2018-Sep-26 14:08:32 :: removed /gears/v/vtk-data6.2.git branch `sisyphus'
2018-Sep-26 14:08:32 :: saved /gears/v/vtk6.2.git branch `sisyphus' as `old/sisyphus-task213453'
2018-Sep-26 14:08:32 :: removed /gears/v/vtk6.2.git branch `sisyphus'
2018-Sep-26 14:09:36 :: gears update OK
2018-Sep-26 14:09:36 :: ACL for orphaned project `Mayavi' assigned to user `darktemplar'
2018-Sep-26 14:09:37 :: ACL for new project `vtk-data8.1' assigned to user `darktemplar'
2018-Sep-26 14:09:38 :: ACL for new project `vtk8.1' assigned to user `darktemplar'
2018-Sep-26 14:09:39 :: ACL for old project `VTKLargeData' removed
2018-Sep-26 14:09:40 :: ACL for old project `vtk-data6.2' removed
2018-Sep-26 14:09:40 :: ACL for old project `vtk6.2' removed
2018-Sep-26 14:09:40 :: task #213453 for sisyphus DONE
More information about the Sisyphus-incominger
mailing list