[#213841] TESTED (try 7) openscada.git=0.9.0-alt2
Girar Builder awaiter robot
girar-builder at altlinux.org
Fri Oct 5 23:48:06 MSK 2018
http://git.altlinux.org/tasks/213841/logs/events.7.1.log
2018-Oct-05 16:57:22 :: test-only task #213841 for sisyphus resumed by root_glebfm:
#100 build 0.9.0-alt2 from /people/antohami/packages/openscada.git fetched at 2018-Oct-01 11:08:29
2018-Oct-05 16:57:22 :: waiting for a shared lock on sisyphus
2018-Oct-05 16:58:27 :: acquired a shared lock on sisyphus
2018-Oct-05 16:58:29 :: [aarch64] #100 openscada.git 0.9.0-alt2: build start
2018-Oct-05 16:58:29 :: [x86_64] #100 openscada.git 0.9.0-alt2: build start
2018-Oct-05 16:58:29 :: [i586] #100 openscada.git 0.9.0-alt2: build start
2018-Oct-05 17:24:52 :: [x86_64] #100 openscada.git 0.9.0-alt2: build OK
2018-Oct-05 17:28:19 :: [i586] #100 openscada.git 0.9.0-alt2: build OK
2018-Oct-05 17:53:12 :: [aarch64] #100 openscada.git 0.9.0-alt2: build OK
2018-Oct-05 17:55:56 :: build check OK
2018-Oct-05 17:57:22 :: noarch check OK
2018-Oct-05 17:57:24 :: plan: src +1 -1 =18661, aarch64 +88 -88 =29446, i586 +92 -92 =33777, noarch +10 -10 =19121, x86_64 +88 -88 =33848
2018-Oct-05 17:57:24 :: version check OK
2018-Oct-05 17:58:22 :: generated apt indices
2018-Oct-05 17:58:22 :: created next repo
2018-Oct-05 17:58:42 :: dependencies check OK
2018-Oct-05 17:59:14 :: ELF symbols check OK
2018-Oct-05 17:59:43 :: [x86_64] #100 libopenscada: install check OK
2018-Oct-05 17:59:43 :: [i586] #100 libopenscada: install check OK
2018-Oct-05 18:00:03 :: [x86_64] #100 libopenscada-debuginfo: install check OK
2018-Oct-05 18:00:03 :: [i586] #100 libopenscada-debuginfo: install check OK
2018-Oct-05 18:00:39 :: [aarch64] #100 libopenscada: install check OK
2018-Oct-05 18:00:48 :: [x86_64] #100 openscada: install check OK
2018-Oct-05 18:00:51 :: [i586] #100 openscada: install check OK
2018-Oct-05 18:01:30 :: [x86_64] #100 openscada-Archive.DBArch: install check OK
2018-Oct-05 18:01:34 :: [aarch64] #100 libopenscada-debuginfo: install check OK
2018-Oct-05 18:01:36 :: [i586] #100 openscada-Archive.DBArch: install check OK
2018-Oct-05 18:02:13 :: [x86_64] #100 openscada-Archive.DBArch-debuginfo: install check OK
2018-Oct-05 18:02:23 :: [i586] #100 openscada-Archive.DBArch-debuginfo: install check OK
2018-Oct-05 18:02:55 :: [x86_64] #100 openscada-Archive.FSArch: install check OK
2018-Oct-05 18:03:09 :: [i586] #100 openscada-Archive.FSArch: install check OK
2018-Oct-05 18:03:17 :: [aarch64] #100 openscada: install check OK
2018-Oct-05 18:03:39 :: [x86_64] #100 openscada-Archive.FSArch-debuginfo: install check OK
2018-Oct-05 18:03:56 :: [i586] #100 openscada-Archive.FSArch-debuginfo: install check OK
2018-Oct-05 18:04:20 :: [x86_64] #100 openscada-DAQ.AMRDevs: install check OK
2018-Oct-05 18:04:41 :: [i586] #100 openscada-DAQ.AMRDevs: install check OK
2018-Oct-05 18:04:58 :: [aarch64] #100 openscada-Archive.DBArch: install check OK
2018-Oct-05 18:05:04 :: [x86_64] #100 openscada-DAQ.AMRDevs-debuginfo: install check OK
2018-Oct-05 18:05:28 :: [i586] #100 openscada-DAQ.AMRDevs-debuginfo: install check OK
2018-Oct-05 18:05:45 :: [x86_64] #100 openscada-DAQ.BFN: install check OK
2018-Oct-05 18:06:13 :: [i586] #100 openscada-DAQ.BFN: install check OK
2018-Oct-05 18:06:28 :: [x86_64] #100 openscada-DAQ.BFN-debuginfo: install check OK
2018-Oct-05 18:06:35 :: [aarch64] #100 openscada-Archive.DBArch-debuginfo: install check OK
2018-Oct-05 18:07:00 :: [i586] #100 openscada-DAQ.BFN-debuginfo: install check OK
2018-Oct-05 18:07:09 :: [x86_64] #100 openscada-DAQ.BlockCalc: install check OK
2018-Oct-05 18:07:45 :: [i586] #100 openscada-DAQ.BlockCalc: install check OK
2018-Oct-05 18:07:53 :: [x86_64] #100 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Oct-05 18:08:14 :: [aarch64] #100 openscada-Archive.FSArch: install check OK
2018-Oct-05 18:08:33 :: [i586] #100 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Oct-05 18:08:35 :: [x86_64] #100 openscada-DAQ.Comedi: install check OK
2018-Oct-05 18:09:18 :: [i586] #100 openscada-DAQ.Comedi: install check OK
2018-Oct-05 18:09:19 :: [x86_64] #100 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Oct-05 18:09:55 :: [aarch64] #100 openscada-Archive.FSArch-debuginfo: install check OK
2018-Oct-05 18:10:00 :: [x86_64] #100 openscada-DAQ.DAQGate: install check OK
2018-Oct-05 18:10:06 :: [i586] #100 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Oct-05 18:10:44 :: [x86_64] #100 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Oct-05 18:10:51 :: [i586] #100 openscada-DAQ.DAQGate: install check OK
2018-Oct-05 18:11:26 :: [x86_64] #100 openscada-DAQ.DCON: install check OK
2018-Oct-05 18:11:31 :: [aarch64] #100 openscada-DAQ.AMRDevs: install check OK
2018-Oct-05 18:11:39 :: [i586] #100 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Oct-05 18:12:09 :: [x86_64] #100 openscada-DAQ.DCON-debuginfo: install check OK
2018-Oct-05 18:12:24 :: [i586] #100 openscada-DAQ.DCON: install check OK
2018-Oct-05 18:12:50 :: [x86_64] #100 openscada-DAQ.GPIO: install check OK
2018-Oct-05 18:13:11 :: [i586] #100 openscada-DAQ.DCON-debuginfo: install check OK
2018-Oct-05 18:13:12 :: [aarch64] #100 openscada-DAQ.AMRDevs-debuginfo: install check OK
2018-Oct-05 18:13:34 :: [x86_64] #100 openscada-DAQ.GPIO-debuginfo: install check OK
2018-Oct-05 18:13:57 :: [i586] #100 openscada-DAQ.DiamondBoards: install check OK
2018-Oct-05 18:14:15 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc: install check OK
2018-Oct-05 18:14:44 :: [i586] #100 openscada-DAQ.DiamondBoards-debuginfo: install check OK
2018-Oct-05 18:14:48 :: [aarch64] #100 openscada-DAQ.BFN: install check OK
2018-Oct-05 18:15:00 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Oct-05 18:15:30 :: [i586] #100 openscada-DAQ.GPIO: install check OK
2018-Oct-05 18:15:41 :: [x86_64] #100 openscada-DAQ.LogicLev: install check OK
2018-Oct-05 18:16:17 :: [i586] #100 openscada-DAQ.GPIO-debuginfo: install check OK
2018-Oct-05 18:16:25 :: [x86_64] #100 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Oct-05 18:16:34 :: [aarch64] #100 openscada-DAQ.BFN-debuginfo: install check OK
2018-Oct-05 18:17:03 :: [i586] #100 openscada-DAQ.ICP_DAS: install check OK
2018-Oct-05 18:17:07 :: [x86_64] #100 openscada-DAQ.MMS: install check OK
2018-Oct-05 18:17:56 :: [x86_64] #100 openscada-DAQ.MMS-debuginfo: install check OK
2018-Oct-05 18:17:58 :: [i586] #100 openscada-DAQ.ICP_DAS-debuginfo: install check OK
2018-Oct-05 18:18:16 :: [aarch64] #100 openscada-DAQ.BlockCalc: install check OK
2018-Oct-05 18:18:37 :: [x86_64] #100 openscada-DAQ.ModBus: install check OK
2018-Oct-05 18:18:44 :: [i586] #100 openscada-DAQ.JavaLikeCalc: install check OK
2018-Oct-05 18:19:21 :: [x86_64] #100 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Oct-05 18:19:32 :: [i586] #100 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Oct-05 18:20:02 :: [aarch64] #100 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Oct-05 18:20:03 :: [x86_64] #100 openscada-DAQ.OPC_UA: install check OK
2018-Oct-05 18:20:17 :: [i586] #100 openscada-DAQ.LogicLev: install check OK
2018-Oct-05 18:20:47 :: [x86_64] #100 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Oct-05 18:21:05 :: [i586] #100 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Oct-05 18:21:30 :: [x86_64] #100 openscada-DAQ.SNMP: install check OK
2018-Oct-05 18:21:50 :: [i586] #100 openscada-DAQ.MMS: install check OK
2018-Oct-05 18:21:59 :: [aarch64] #100 openscada-DAQ.Comedi: install check OK
2018-Oct-05 18:22:16 :: [x86_64] #100 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Oct-05 18:22:38 :: [i586] #100 openscada-DAQ.MMS-debuginfo: install check OK
2018-Oct-05 18:22:59 :: [x86_64] #100 openscada-DAQ.Siemens: install check OK
2018-Oct-05 18:23:24 :: [i586] #100 openscada-DAQ.ModBus: install check OK
2018-Oct-05 18:23:40 :: [aarch64] #100 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Oct-05 18:23:43 :: [x86_64] #100 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Oct-05 18:24:12 :: [i586] #100 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Oct-05 18:24:25 :: [x86_64] #100 openscada-DAQ.SoundCard: install check OK
2018-Oct-05 18:24:57 :: [i586] #100 openscada-DAQ.OPC_UA: install check OK
2018-Oct-05 18:25:10 :: [x86_64] #100 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Oct-05 18:25:19 :: [aarch64] #100 openscada-DAQ.DAQGate: install check OK
2018-Oct-05 18:25:45 :: [i586] #100 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Oct-05 18:25:51 :: [x86_64] #100 openscada-DAQ.System: install check OK
2018-Oct-05 18:26:30 :: [i586] #100 openscada-DAQ.SNMP: install check OK
2018-Oct-05 18:26:35 :: [x86_64] #100 openscada-DAQ.System-debuginfo: install check OK
2018-Oct-05 18:27:04 :: [aarch64] #100 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Oct-05 18:27:17 :: [x86_64] #100 openscada-DB.DBF: install check OK
2018-Oct-05 18:27:20 :: [i586] #100 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Oct-05 18:28:02 :: [x86_64] #100 openscada-DB.DBF-debuginfo: install check OK
2018-Oct-05 18:28:05 :: [i586] #100 openscada-DAQ.Siemens: install check OK
2018-Oct-05 18:28:45 :: [aarch64] #100 openscada-DAQ.DCON: install check OK
2018-Oct-05 18:28:45 :: [x86_64] #100 openscada-DB.FireBird: install check OK
2018-Oct-05 18:28:53 :: [i586] #100 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Oct-05 18:29:30 :: [x86_64] #100 openscada-DB.FireBird-debuginfo: install check OK
2018-Oct-05 18:29:39 :: [i586] #100 openscada-DAQ.SoundCard: install check OK
2018-Oct-05 18:30:12 :: [x86_64] #100 openscada-DB.MySQL: install check OK
2018-Oct-05 18:30:28 :: [i586] #100 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Oct-05 18:30:34 :: [aarch64] #100 openscada-DAQ.DCON-debuginfo: install check OK
2018-Oct-05 18:30:58 :: [x86_64] #100 openscada-DB.MySQL-debuginfo: install check OK
2018-Oct-05 18:31:13 :: [i586] #100 openscada-DAQ.System: install check OK
2018-Oct-05 18:31:39 :: [x86_64] #100 openscada-DB.PostgreSQL: install check OK
2018-Oct-05 18:32:00 :: [i586] #100 openscada-DAQ.System-debuginfo: install check OK
2018-Oct-05 18:32:23 :: [aarch64] #100 openscada-DAQ.GPIO: install check OK
2018-Oct-05 18:32:25 :: [x86_64] #100 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Oct-05 18:32:46 :: [i586] #100 openscada-DB.DBF: install check OK
2018-Oct-05 18:33:07 :: [x86_64] #100 openscada-DB.SQLite: install check OK
2018-Oct-05 18:33:33 :: [i586] #100 openscada-DB.DBF-debuginfo: install check OK
2018-Oct-05 18:33:51 :: [x86_64] #100 openscada-DB.SQLite-debuginfo: install check OK
2018-Oct-05 18:34:10 :: [aarch64] #100 openscada-DAQ.GPIO-debuginfo: install check OK
2018-Oct-05 18:34:18 :: [i586] #100 openscada-DB.FireBird: install check OK
2018-Oct-05 18:34:33 :: [x86_64] #100 openscada-LibDB.Main: install check OK
2018-Oct-05 18:35:06 :: [i586] #100 openscada-DB.FireBird-debuginfo: install check OK
2018-Oct-05 18:35:15 :: [x86_64] #100 openscada-LibDB.VCA: install check OK
2018-Oct-05 18:35:48 :: [aarch64] #100 openscada-DAQ.JavaLikeCalc: install check OK
2018-Oct-05 18:35:51 :: [i586] #100 openscada-DB.MySQL: install check OK
2018-Oct-05 18:35:57 :: [x86_64] #100 openscada-Model.AGLKS: install check OK
2018-Oct-05 18:36:39 :: [x86_64] #100 openscada-Model.Boiler: install check OK
2018-Oct-05 18:36:40 :: [i586] #100 openscada-DB.MySQL-debuginfo: install check OK
2018-Oct-05 18:37:21 :: [x86_64] #100 openscada-Protocol.HTTP: install check OK
2018-Oct-05 18:37:26 :: [i586] #100 openscada-DB.PostgreSQL: install check OK
2018-Oct-05 18:37:35 :: [aarch64] #100 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Oct-05 18:38:04 :: [x86_64] #100 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Oct-05 18:38:16 :: [i586] #100 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Oct-05 18:38:46 :: [x86_64] #100 openscada-Protocol.SelfSystem: install check OK
2018-Oct-05 18:39:01 :: [i586] #100 openscada-DB.SQLite: install check OK
2018-Oct-05 18:39:17 :: [aarch64] #100 openscada-DAQ.LogicLev: install check OK
2018-Oct-05 18:39:31 :: [x86_64] #100 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Oct-05 18:39:48 :: [i586] #100 openscada-DB.SQLite-debuginfo: install check OK
2018-Oct-05 18:40:13 :: [x86_64] #100 openscada-Protocol.UserProtocol: install check OK
2018-Oct-05 18:40:35 :: [i586] #100 openscada-LibDB.Main: install check OK
2018-Oct-05 18:40:57 :: [x86_64] #100 openscada-Protocol.UserProtocol-debuginfo: install check OK
2018-Oct-05 18:41:06 :: [aarch64] #100 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Oct-05 18:41:21 :: [i586] #100 openscada-LibDB.VCA: install check OK
2018-Oct-05 18:41:39 :: [x86_64] #100 openscada-Special.FLibComplex1: install check OK
2018-Oct-05 18:42:07 :: [i586] #100 openscada-Model.AGLKS: install check OK
2018-Oct-05 18:42:23 :: [x86_64] #100 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Oct-05 18:42:50 :: [aarch64] #100 openscada-DAQ.MMS: install check OK
2018-Oct-05 18:42:54 :: [i586] #100 openscada-Model.Boiler: install check OK
2018-Oct-05 18:43:06 :: [x86_64] #100 openscada-Special.FLibMath: install check OK
2018-Oct-05 18:43:38 :: [i586] #100 openscada-Protocol.HTTP: install check OK
2018-Oct-05 18:43:49 :: [x86_64] #100 openscada-Special.FLibMath-debuginfo: install check OK
2018-Oct-05 18:44:26 :: [i586] #100 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Oct-05 18:44:31 :: [x86_64] #100 openscada-Special.FLibSYS: install check OK
2018-Oct-05 18:44:34 :: [aarch64] #100 openscada-DAQ.MMS-debuginfo: install check OK
2018-Oct-05 18:45:11 :: [i586] #100 openscada-Protocol.SelfSystem: install check OK
2018-Oct-05 18:45:17 :: [x86_64] #100 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Oct-05 18:45:59 :: [x86_64] #100 openscada-Special.SystemTests: install check OK
2018-Oct-05 18:45:59 :: [i586] #100 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Oct-05 18:46:23 :: [aarch64] #100 openscada-DAQ.ModBus: install check OK
2018-Oct-05 18:46:42 :: [x86_64] #100 openscada-Special.SystemTests-debuginfo: install check OK
2018-Oct-05 18:46:45 :: [i586] #100 openscada-Protocol.UserProtocol: install check OK
2018-Oct-05 18:47:24 :: [x86_64] #100 openscada-Transport.SSL: install check OK
2018-Oct-05 18:47:32 :: [i586] #100 openscada-Protocol.UserProtocol-debuginfo: install check OK
2018-Oct-05 18:48:09 :: [x86_64] #100 openscada-Transport.SSL-debuginfo: install check OK
2018-Oct-05 18:48:10 :: [aarch64] #100 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Oct-05 18:48:17 :: [i586] #100 openscada-Special.FLibComplex1: install check OK
2018-Oct-05 18:48:50 :: [x86_64] #100 openscada-Transport.Serial: install check OK
2018-Oct-05 18:49:04 :: [i586] #100 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Oct-05 18:49:34 :: [x86_64] #100 openscada-Transport.Serial-debuginfo: install check OK
2018-Oct-05 18:49:49 :: [i586] #100 openscada-Special.FLibMath: install check OK
2018-Oct-05 18:49:52 :: [aarch64] #100 openscada-DAQ.OPC_UA: install check OK
2018-Oct-05 18:50:15 :: [x86_64] #100 openscada-Transport.Sockets: install check OK
2018-Oct-05 18:50:37 :: [i586] #100 openscada-Special.FLibMath-debuginfo: install check OK
2018-Oct-05 18:50:59 :: [x86_64] #100 openscada-Transport.Sockets-debuginfo: install check OK
2018-Oct-05 18:51:23 :: [i586] #100 openscada-Special.FLibSYS: install check OK
2018-Oct-05 18:51:31 :: [aarch64] #100 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Oct-05 18:51:41 :: [x86_64] #100 openscada-UI.QTCfg: install check OK
2018-Oct-05 18:52:12 :: [i586] #100 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Oct-05 18:52:33 :: [x86_64] #100 openscada-UI.QTCfg-debuginfo: install check OK
2018-Oct-05 18:52:57 :: [i586] #100 openscada-Special.SystemTests: install check OK
2018-Oct-05 18:53:07 :: [aarch64] #100 openscada-DAQ.SNMP: install check OK
2018-Oct-05 18:53:14 :: [x86_64] #100 openscada-UI.QTStarter: install check OK
2018-Oct-05 18:53:45 :: [i586] #100 openscada-Special.SystemTests-debuginfo: install check OK
2018-Oct-05 18:54:24 :: [x86_64] #100 openscada-UI.QTStarter-debuginfo: install check OK
2018-Oct-05 18:54:31 :: [i586] #100 openscada-Transport.SSL: install check OK
2018-Oct-05 18:54:53 :: [aarch64] #100 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Oct-05 18:55:06 :: [x86_64] #100 openscada-UI.VCAEngine: install check OK
2018-Oct-05 18:55:19 :: [i586] #100 openscada-Transport.SSL-debuginfo: install check OK
2018-Oct-05 18:55:50 :: [x86_64] #100 openscada-UI.VCAEngine-debuginfo: install check OK
2018-Oct-05 18:56:05 :: [i586] #100 openscada-Transport.Serial: install check OK
2018-Oct-05 18:56:31 :: [x86_64] #100 openscada-UI.Vision: install check OK
2018-Oct-05 18:56:32 :: [aarch64] #100 openscada-DAQ.Siemens: install check OK
2018-Oct-05 18:56:53 :: [i586] #100 openscada-Transport.Serial-debuginfo: install check OK
2018-Oct-05 18:57:38 :: [i586] #100 openscada-Transport.Sockets: install check OK
2018-Oct-05 18:57:47 :: [x86_64] #100 openscada-UI.Vision-debuginfo: install check OK
2018-Oct-05 18:58:17 :: [aarch64] #100 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Oct-05 18:58:26 :: [i586] #100 openscada-Transport.Sockets-debuginfo: install check OK
2018-Oct-05 18:58:29 :: [x86_64] #100 openscada-UI.WebCfg: install check OK
2018-Oct-05 18:59:11 :: [i586] #100 openscada-UI.QTCfg: install check OK
2018-Oct-05 18:59:14 :: [x86_64] #100 openscada-UI.WebCfg-debuginfo: install check OK
2018-Oct-05 18:59:56 :: [x86_64] #100 openscada-UI.WebCfgD: install check OK
2018-Oct-05 19:00:08 :: [i586] #100 openscada-UI.QTCfg-debuginfo: install check OK
2018-Oct-05 19:00:09 :: [aarch64] #100 openscada-DAQ.SoundCard: install check OK
2018-Oct-05 19:00:40 :: [x86_64] #100 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Oct-05 19:00:54 :: [i586] #100 openscada-UI.QTStarter: install check OK
2018-Oct-05 19:01:22 :: [x86_64] #100 openscada-UI.WebUser: install check OK
2018-Oct-05 19:02:01 :: [aarch64] #100 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Oct-05 19:02:07 :: [x86_64] #100 openscada-UI.WebUser-debuginfo: install check OK
2018-Oct-05 19:02:09 :: [i586] #100 openscada-UI.QTStarter-debuginfo: install check OK
2018-Oct-05 19:02:49 :: [x86_64] #100 openscada-UI.WebVision: install check OK
2018-Oct-05 19:02:55 :: [i586] #100 openscada-UI.VCAEngine: install check OK
2018-Oct-05 19:03:37 :: [x86_64] #100 openscada-UI.WebVision-debuginfo: install check OK
2018-Oct-05 19:03:43 :: [i586] #100 openscada-UI.VCAEngine-debuginfo: install check OK
2018-Oct-05 19:03:45 :: [aarch64] #100 openscada-DAQ.System: install check OK
x86_64: openscada-core=0.9.0-alt2 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Oct-05 19:04:18 :: [x86_64] #100 openscada-core: install check OK
2018-Oct-05 19:04:29 :: [i586] #100 openscada-UI.Vision: install check OK
2018-Oct-05 19:05:02 :: [x86_64] #100 openscada-core-debuginfo: install check OK
2018-Oct-05 19:05:20 :: [x86_64] #100 openscada-devel: install check OK
2018-Oct-05 19:05:28 :: [aarch64] #100 openscada-DAQ.System-debuginfo: install check OK
2018-Oct-05 19:05:41 :: [x86_64] #100 openscada-docEN: install check OK
2018-Oct-05 19:05:51 :: [i586] #100 openscada-UI.Vision-debuginfo: install check OK
2018-Oct-05 19:06:01 :: [x86_64] #100 openscada-docRU: install check OK
2018-Oct-05 19:06:21 :: [x86_64] #100 openscada-docUK: install check OK
2018-Oct-05 19:06:37 :: [i586] #100 openscada-UI.WebCfg: install check OK
2018-Oct-05 19:07:03 :: [x86_64] #100 openscada-plc: install check OK
2018-Oct-05 19:07:07 :: [aarch64] #100 openscada-DB.DBF: install check OK
2018-Oct-05 19:07:24 :: [i586] #100 openscada-UI.WebCfg-debuginfo: install check OK
2018-Oct-05 19:07:46 :: [x86_64] #100 openscada-server: install check OK
2018-Oct-05 19:08:09 :: [i586] #100 openscada-UI.WebCfgD: install check OK
2018-Oct-05 19:08:29 :: [x86_64] #100 openscada-visStation: install check OK
2018-Oct-05 19:08:55 :: [aarch64] #100 openscada-DB.DBF-debuginfo: install check OK
2018-Oct-05 19:08:56 :: [i586] #100 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Oct-05 19:09:42 :: [i586] #100 openscada-UI.WebUser: install check OK
2018-Oct-05 19:10:29 :: [i586] #100 openscada-UI.WebUser-debuginfo: install check OK
2018-Oct-05 19:10:35 :: [aarch64] #100 openscada-DB.FireBird: install check OK
2018-Oct-05 19:11:15 :: [i586] #100 openscada-UI.WebVision: install check OK
2018-Oct-05 19:12:06 :: [i586] #100 openscada-UI.WebVision-debuginfo: install check OK
2018-Oct-05 19:12:20 :: [aarch64] #100 openscada-DB.FireBird-debuginfo: install check OK
i586: openscada-core=0.9.0-alt2 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Oct-05 19:12:52 :: [i586] #100 openscada-core: install check OK
2018-Oct-05 19:13:40 :: [i586] #100 openscada-core-debuginfo: install check OK
2018-Oct-05 19:13:58 :: [i586] #100 openscada-devel: install check OK
2018-Oct-05 19:14:00 :: [aarch64] #100 openscada-DB.MySQL: install check OK
2018-Oct-05 19:14:18 :: [i586] #100 openscada-docEN: install check OK
2018-Oct-05 19:14:38 :: [i586] #100 openscada-docRU: install check OK
2018-Oct-05 19:14:58 :: [i586] #100 openscada-docUK: install check OK
2018-Oct-05 19:15:43 :: [i586] #100 openscada-plc: install check OK
2018-Oct-05 19:15:45 :: [aarch64] #100 openscada-DB.MySQL-debuginfo: install check OK
2018-Oct-05 19:16:30 :: [i586] #100 openscada-server: install check OK
2018-Oct-05 19:17:16 :: [i586] #100 openscada-visStation: install check OK
2018-Oct-05 19:17:28 :: [aarch64] #100 openscada-DB.PostgreSQL: install check OK
2018-Oct-05 19:19:18 :: [aarch64] #100 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Oct-05 19:20:57 :: [aarch64] #100 openscada-DB.SQLite: install check OK
2018-Oct-05 19:22:43 :: [aarch64] #100 openscada-DB.SQLite-debuginfo: install check OK
2018-Oct-05 19:24:23 :: [aarch64] #100 openscada-LibDB.Main: install check OK
2018-Oct-05 19:26:06 :: [aarch64] #100 openscada-LibDB.VCA: install check OK
2018-Oct-05 19:27:51 :: [aarch64] #100 openscada-Model.AGLKS: install check OK
2018-Oct-05 19:29:34 :: [aarch64] #100 openscada-Model.Boiler: install check OK
2018-Oct-05 19:31:22 :: [aarch64] #100 openscada-Protocol.HTTP: install check OK
2018-Oct-05 19:33:06 :: [aarch64] #100 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Oct-05 19:34:47 :: [aarch64] #100 openscada-Protocol.SelfSystem: install check OK
2018-Oct-05 19:36:35 :: [aarch64] #100 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Oct-05 19:38:18 :: [aarch64] #100 openscada-Protocol.UserProtocol: install check OK
2018-Oct-05 19:40:03 :: [aarch64] #100 openscada-Protocol.UserProtocol-debuginfo: install check OK
2018-Oct-05 19:41:43 :: [aarch64] #100 openscada-Special.FLibComplex1: install check OK
2018-Oct-05 19:43:30 :: [aarch64] #100 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Oct-05 19:45:12 :: [aarch64] #100 openscada-Special.FLibMath: install check OK
2018-Oct-05 19:46:53 :: [aarch64] #100 openscada-Special.FLibMath-debuginfo: install check OK
2018-Oct-05 19:48:34 :: [aarch64] #100 openscada-Special.FLibSYS: install check OK
2018-Oct-05 19:50:19 :: [aarch64] #100 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Oct-05 19:51:59 :: [aarch64] #100 openscada-Special.SystemTests: install check OK
2018-Oct-05 19:53:45 :: [aarch64] #100 openscada-Special.SystemTests-debuginfo: install check OK
2018-Oct-05 19:55:24 :: [aarch64] #100 openscada-Transport.SSL: install check OK
2018-Oct-05 19:57:08 :: [aarch64] #100 openscada-Transport.SSL-debuginfo: install check OK
2018-Oct-05 19:58:44 :: [aarch64] #100 openscada-Transport.Serial: install check OK
2018-Oct-05 20:00:29 :: [aarch64] #100 openscada-Transport.Serial-debuginfo: install check OK
2018-Oct-05 20:02:13 :: [aarch64] #100 openscada-Transport.Sockets: install check OK
2018-Oct-05 20:03:55 :: [aarch64] #100 openscada-Transport.Sockets-debuginfo: install check OK
2018-Oct-05 20:05:34 :: [aarch64] #100 openscada-UI.QTCfg: install check OK
2018-Oct-05 20:07:33 :: [aarch64] #100 openscada-UI.QTCfg-debuginfo: install check OK
2018-Oct-05 20:09:14 :: [aarch64] #100 openscada-UI.QTStarter: install check OK
2018-Oct-05 20:11:25 :: [aarch64] #100 openscada-UI.QTStarter-debuginfo: install check OK
2018-Oct-05 20:13:05 :: [aarch64] #100 openscada-UI.VCAEngine: install check OK
2018-Oct-05 20:14:44 :: [aarch64] #100 openscada-UI.VCAEngine-debuginfo: install check OK
2018-Oct-05 20:16:23 :: [aarch64] #100 openscada-UI.Vision: install check OK
2018-Oct-05 20:18:34 :: [aarch64] #100 openscada-UI.Vision-debuginfo: install check OK
2018-Oct-05 20:20:14 :: [aarch64] #100 openscada-UI.WebCfg: install check OK
2018-Oct-05 20:21:54 :: [aarch64] #100 openscada-UI.WebCfg-debuginfo: install check OK
2018-Oct-05 20:23:33 :: [aarch64] #100 openscada-UI.WebCfgD: install check OK
2018-Oct-05 20:25:17 :: [aarch64] #100 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Oct-05 20:26:52 :: [aarch64] #100 openscada-UI.WebUser: install check OK
2018-Oct-05 20:28:35 :: [aarch64] #100 openscada-UI.WebUser-debuginfo: install check OK
2018-Oct-05 20:30:12 :: [aarch64] #100 openscada-UI.WebVision: install check OK
2018-Oct-05 20:31:56 :: [aarch64] #100 openscada-UI.WebVision-debuginfo: install check OK
aarch64: openscada-core=0.9.0-alt2 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Oct-05 20:33:36 :: [aarch64] #100 openscada-core: install check OK
2018-Oct-05 20:35:18 :: [aarch64] #100 openscada-core-debuginfo: install check OK
2018-Oct-05 20:36:13 :: [aarch64] #100 openscada-devel: install check OK
2018-Oct-05 20:37:02 :: [aarch64] #100 openscada-docEN: install check OK
2018-Oct-05 20:37:51 :: [aarch64] #100 openscada-docRU: install check OK
2018-Oct-05 20:38:44 :: [aarch64] #100 openscada-docUK: install check OK
2018-Oct-05 20:40:27 :: [aarch64] #100 openscada-plc: install check OK
2018-Oct-05 20:42:08 :: [aarch64] #100 openscada-server: install check OK
2018-Oct-05 20:43:51 :: [aarch64] #100 openscada-visStation: install check OK
2018-Oct-05 20:44:05 :: [x86_64-i586] plan: #45 +45 -45 =11288
2018-Oct-05 20:46:32 :: [x86_64-i586] arepo build OK
2018-Oct-05 20:46:52 :: [x86_64-i586] generated apt indices
2018-Oct-05 20:46:52 :: [x86_64-i586] created next repo
2018-Oct-05 20:47:00 :: [x86_64-i586] dependencies check OK
2018-Oct-05 20:47:01 :: gears inheritance check OK
2018-Oct-05 20:47:01 :: srpm inheritance check OK
girar-check-perms: access to openscada ALLOWED for antohami: project leader
2018-Oct-05 20:47:01 :: acl check OK
2018-Oct-05 20:47:49 :: created contents_index files
2018-Oct-05 20:48:04 :: created hash files: aarch64 i586 noarch src x86_64-i586 x86_64
2018-Oct-05 20:48:06 :: task #213841 for sisyphus TESTED
More information about the Sisyphus-incominger
mailing list