[#213841] FAILED (try 6) openscada.git=0.9.0-alt2
Girar Builder awaiter robot
girar-builder at altlinux.org
Fri Oct 5 17:20:15 MSK 2018
http://git.altlinux.org/tasks/213841/logs/events.6.1.log
2018-Oct-05 10:37:37 :: test-only task #213841 for sisyphus resumed by root_glebfm:
#100 build 0.9.0-alt2 from /people/antohami/packages/openscada.git fetched at 2018-Oct-01 11:08:29
2018-Oct-05 10:37:41 :: [x86_64] #100 openscada.git 0.9.0-alt2: build start
2018-Oct-05 10:37:41 :: [aarch64] #100 openscada.git 0.9.0-alt2: build start
2018-Oct-05 10:37:41 :: [i586] #100 openscada.git 0.9.0-alt2: build start
2018-Oct-05 10:38:48 :: [i586] openscada.git 0.9.0-alt2: remote: no need to rebuild
2018-Oct-05 10:38:49 :: [i586] #100 openscada.git 0.9.0-alt2: build OK
2018-Oct-05 10:38:50 :: [x86_64] openscada.git 0.9.0-alt2: remote: no need to rebuild
2018-Oct-05 10:38:58 :: [x86_64] #100 openscada.git 0.9.0-alt2: build OK
2018-Oct-05 10:39:21 :: [aarch64] openscada.git 0.9.0-alt2: remote: no need to rebuild
2018-Oct-05 10:39:22 :: [aarch64] #100 openscada.git 0.9.0-alt2: build OK
2018-Oct-05 11:14:42 :: build check OK
2018-Oct-05 11:17:29 :: noarch check OK
2018-Oct-05 11:17:31 :: plan: src +1 -1 =18661, aarch64 +88 -88 =29437, i586 +92 -92 =33773, noarch +10 -10 =19121, x86_64 +88 -88 =33844
2018-Oct-05 11:17:31 :: version check OK
2018-Oct-05 11:18:41 :: generated apt indices
2018-Oct-05 11:18:41 :: created next repo
2018-Oct-05 11:19:02 :: dependencies check OK
2018-Oct-05 11:19:32 :: ELF symbols check OK
2018-Oct-05 11:19:50 :: [i586] #100 libopenscada: no need to repeat, install check SKIPPED
2018-Oct-05 11:19:51 :: [x86_64] #100 libopenscada: no need to repeat, install check SKIPPED
2018-Oct-05 11:20:04 :: [i586] #100 libopenscada-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-05 11:20:04 :: [x86_64] #100 libopenscada-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-05 11:20:24 :: [aarch64] #100 libopenscada: no need to repeat, install check SKIPPED
2018-Oct-05 11:20:55 :: [x86_64] #100 openscada: install check OK
2018-Oct-05 11:20:58 :: [i586] #100 openscada: install check OK
2018-Oct-05 11:21:01 :: [aarch64] #100 libopenscada-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-05 11:21:57 :: [i586] #100 openscada-Archive.DBArch: install check OK
2018-Oct-05 11:21:59 :: [x86_64] #100 openscada-Archive.DBArch: install check OK
2018-Oct-05 11:22:46 :: [x86_64] #100 openscada-Archive.DBArch-debuginfo: install check OK
2018-Oct-05 11:22:48 :: [i586] #100 openscada-Archive.DBArch-debuginfo: install check OK
2018-Oct-05 11:22:57 :: [aarch64] #100 openscada: install check OK
2018-Oct-05 11:23:30 :: [x86_64] #100 openscada-Archive.FSArch: install check OK
2018-Oct-05 11:23:36 :: [i586] #100 openscada-Archive.FSArch: install check OK
2018-Oct-05 11:24:17 :: [x86_64] #100 openscada-Archive.FSArch-debuginfo: install check OK
2018-Oct-05 11:24:26 :: [i586] #100 openscada-Archive.FSArch-debuginfo: install check OK
2018-Oct-05 11:24:41 :: [aarch64] #100 openscada-Archive.DBArch: install check OK
2018-Oct-05 11:25:02 :: [x86_64] #100 openscada-DAQ.AMRDevs: install check OK
2018-Oct-05 11:25:14 :: [i586] #100 openscada-DAQ.AMRDevs: install check OK
2018-Oct-05 11:25:55 :: [x86_64] #100 openscada-DAQ.AMRDevs-debuginfo: install check OK
2018-Oct-05 11:26:03 :: [i586] #100 openscada-DAQ.AMRDevs-debuginfo: install check OK
2018-Oct-05 11:26:32 :: [aarch64] #100 openscada-Archive.DBArch-debuginfo: install check OK
2018-Oct-05 11:26:41 :: [x86_64] #100 openscada-DAQ.BFN: install check OK
2018-Oct-05 11:26:51 :: [i586] #100 openscada-DAQ.BFN: install check OK
2018-Oct-05 11:27:28 :: [x86_64] #100 openscada-DAQ.BFN-debuginfo: install check OK
2018-Oct-05 11:27:42 :: [i586] #100 openscada-DAQ.BFN-debuginfo: install check OK
2018-Oct-05 11:28:12 :: [x86_64] #100 openscada-DAQ.BlockCalc: install check OK
2018-Oct-05 11:28:19 :: [aarch64] #100 openscada-Archive.FSArch: install check OK
2018-Oct-05 11:28:30 :: [i586] #100 openscada-DAQ.BlockCalc: install check OK
2018-Oct-05 11:28:59 :: [x86_64] #100 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Oct-05 11:29:20 :: [i586] #100 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Oct-05 11:29:44 :: [x86_64] #100 openscada-DAQ.Comedi: install check OK
2018-Oct-05 11:30:08 :: [i586] #100 openscada-DAQ.Comedi: install check OK
2018-Oct-05 11:30:14 :: [aarch64] #100 openscada-Archive.FSArch-debuginfo: install check OK
2018-Oct-05 11:30:30 :: [x86_64] #100 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Oct-05 11:30:58 :: [i586] #100 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Oct-05 11:31:16 :: [x86_64] #100 openscada-DAQ.DAQGate: install check OK
2018-Oct-05 11:31:47 :: [i586] #100 openscada-DAQ.DAQGate: install check OK
2018-Oct-05 11:31:58 :: [aarch64] #100 openscada-DAQ.AMRDevs: install check OK
2018-Oct-05 11:32:02 :: [x86_64] #100 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Oct-05 11:32:46 :: [i586] #100 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Oct-05 11:33:09 :: [x86_64] #100 openscada-DAQ.DCON: install check OK
2018-Oct-05 11:33:39 :: [i586] #100 openscada-DAQ.DCON: install check OK
2018-Oct-05 11:33:52 :: [aarch64] #100 openscada-DAQ.AMRDevs-debuginfo: install check OK
2018-Oct-05 11:33:59 :: [x86_64] #100 openscada-DAQ.DCON-debuginfo: install check OK
2018-Oct-05 11:34:29 :: [i586] #100 openscada-DAQ.DCON-debuginfo: install check OK
2018-Oct-05 11:34:44 :: [x86_64] #100 openscada-DAQ.GPIO: install check OK
2018-Oct-05 11:35:18 :: [i586] #100 openscada-DAQ.DiamondBoards: install check OK
2018-Oct-05 11:35:30 :: [x86_64] #100 openscada-DAQ.GPIO-debuginfo: install check OK
2018-Oct-05 11:35:35 :: [aarch64] #100 openscada-DAQ.BFN: install check OK
2018-Oct-05 11:36:08 :: [i586] #100 openscada-DAQ.DiamondBoards-debuginfo: install check OK
2018-Oct-05 11:36:15 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc: install check OK
2018-Oct-05 11:36:57 :: [i586] #100 openscada-DAQ.GPIO: install check OK
2018-Oct-05 11:37:02 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Oct-05 11:37:26 :: [aarch64] #100 openscada-DAQ.BFN-debuginfo: install check OK
2018-Oct-05 11:37:47 :: [i586] #100 openscada-DAQ.GPIO-debuginfo: install check OK
2018-Oct-05 11:37:47 :: [x86_64] #100 openscada-DAQ.LogicLev: install check OK
2018-Oct-05 11:38:49 :: [x86_64] #100 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Oct-05 11:38:53 :: [i586] #100 openscada-DAQ.ICP_DAS: install check OK
2018-Oct-05 11:39:24 :: [aarch64] #100 openscada-DAQ.BlockCalc: install check OK
2018-Oct-05 11:39:38 :: [x86_64] #100 openscada-DAQ.MMS: install check OK
2018-Oct-05 11:39:44 :: [i586] #100 openscada-DAQ.ICP_DAS-debuginfo: install check OK
2018-Oct-05 11:40:25 :: [x86_64] #100 openscada-DAQ.MMS-debuginfo: install check OK
2018-Oct-05 11:40:33 :: [i586] #100 openscada-DAQ.JavaLikeCalc: install check OK
2018-Oct-05 11:41:09 :: [x86_64] #100 openscada-DAQ.ModBus: install check OK
2018-Oct-05 11:41:22 :: [i586] #100 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Oct-05 11:41:22 :: [aarch64] #100 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Oct-05 11:41:56 :: [x86_64] #100 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Oct-05 11:42:11 :: [i586] #100 openscada-DAQ.LogicLev: install check OK
2018-Oct-05 11:42:53 :: [x86_64] #100 openscada-DAQ.OPC_UA: install check OK
2018-Oct-05 11:43:16 :: [i586] #100 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Oct-05 11:43:18 :: [aarch64] #100 openscada-DAQ.Comedi: install check OK
2018-Oct-05 11:43:42 :: [x86_64] #100 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Oct-05 11:44:04 :: [i586] #100 openscada-DAQ.MMS: install check OK
2018-Oct-05 11:44:27 :: [x86_64] #100 openscada-DAQ.SNMP: install check OK
2018-Oct-05 11:44:54 :: [i586] #100 openscada-DAQ.MMS-debuginfo: install check OK
2018-Oct-05 11:45:15 :: [x86_64] #100 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Oct-05 11:45:42 :: [i586] #100 openscada-DAQ.ModBus: install check OK
2018-Oct-05 11:45:48 :: [aarch64] #100 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Oct-05 11:45:59 :: [x86_64] #100 openscada-DAQ.Siemens: install check OK
2018-Oct-05 11:46:33 :: [i586] #100 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Oct-05 11:46:45 :: [x86_64] #100 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Oct-05 11:47:20 :: [i586] #100 openscada-DAQ.OPC_UA: install check OK
2018-Oct-05 11:47:29 :: [x86_64] #100 openscada-DAQ.SoundCard: install check OK
2018-Oct-05 11:47:35 :: [aarch64] #100 openscada-DAQ.DAQGate: install check OK
2018-Oct-05 11:48:10 :: [i586] #100 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Oct-05 11:48:17 :: [x86_64] #100 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Oct-05 11:48:58 :: [i586] #100 openscada-DAQ.SNMP: install check OK
2018-Oct-05 11:49:01 :: [x86_64] #100 openscada-DAQ.System: install check OK
2018-Oct-05 11:49:35 :: [aarch64] #100 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Oct-05 11:49:46 :: [x86_64] #100 openscada-DAQ.System-debuginfo: install check OK
2018-Oct-05 11:49:50 :: [i586] #100 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Oct-05 11:50:31 :: [x86_64] #100 openscada-DB.DBF: install check OK
2018-Oct-05 11:50:37 :: [i586] #100 openscada-DAQ.Siemens: install check OK
2018-Oct-05 11:51:17 :: [x86_64] #100 openscada-DB.DBF-debuginfo: install check OK
2018-Oct-05 11:51:26 :: [i586] #100 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Oct-05 11:51:30 :: [aarch64] #100 openscada-DAQ.DCON: install check OK
2018-Oct-05 11:52:01 :: [x86_64] #100 openscada-DB.FireBird: install check OK
2018-Oct-05 11:52:15 :: [i586] #100 openscada-DAQ.SoundCard: install check OK
2018-Oct-05 11:52:48 :: [x86_64] #100 openscada-DB.FireBird-debuginfo: install check OK
2018-Oct-05 11:53:05 :: [i586] #100 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Oct-05 11:53:29 :: [aarch64] #100 openscada-DAQ.DCON-debuginfo: install check OK
2018-Oct-05 11:53:33 :: [x86_64] #100 openscada-DB.MySQL: install check OK
2018-Oct-05 11:53:53 :: [i586] #100 openscada-DAQ.System: install check OK
2018-Oct-05 11:54:20 :: [x86_64] #100 openscada-DB.MySQL-debuginfo: install check OK
2018-Oct-05 11:54:44 :: [i586] #100 openscada-DAQ.System-debuginfo: install check OK
2018-Oct-05 11:55:06 :: [x86_64] #100 openscada-DB.PostgreSQL: install check OK
2018-Oct-05 11:55:31 :: [i586] #100 openscada-DB.DBF: install check OK
2018-Oct-05 11:55:40 :: [aarch64] #100 openscada-DAQ.GPIO: install check OK
2018-Oct-05 11:55:54 :: [x86_64] #100 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Oct-05 11:56:21 :: [i586] #100 openscada-DB.DBF-debuginfo: install check OK
2018-Oct-05 11:56:39 :: [x86_64] #100 openscada-DB.SQLite: install check OK
2018-Oct-05 11:57:24 :: [i586] #100 openscada-DB.FireBird: install check OK
2018-Oct-05 11:57:44 :: [aarch64] #100 openscada-DAQ.GPIO-debuginfo: install check OK
2018-Oct-05 11:57:50 :: [x86_64] #100 openscada-DB.SQLite-debuginfo: install check OK
2018-Oct-05 11:58:32 :: [i586] #100 openscada-DB.FireBird-debuginfo: install check OK
2018-Oct-05 11:58:37 :: [x86_64] #100 openscada-LibDB.Main: install check OK
2018-Oct-05 11:59:31 :: [x86_64] #100 openscada-LibDB.VCA: install check OK
2018-Oct-05 11:59:35 :: [aarch64] #100 openscada-DAQ.JavaLikeCalc: install check OK
2018-Oct-05 11:59:36 :: [i586] #100 openscada-DB.MySQL: install check OK
2018-Oct-05 12:00:16 :: [x86_64] #100 openscada-Model.AGLKS: install check OK
2018-Oct-05 12:00:28 :: [i586] #100 openscada-DB.MySQL-debuginfo: install check OK
2018-Oct-05 12:01:00 :: [x86_64] #100 openscada-Model.Boiler: install check OK
2018-Oct-05 12:01:16 :: [i586] #100 openscada-DB.PostgreSQL: install check OK
2018-Oct-05 12:01:24 :: [aarch64] #100 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Oct-05 12:01:44 :: [x86_64] #100 openscada-Protocol.HTTP: install check OK
2018-Oct-05 12:02:08 :: [i586] #100 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Oct-05 12:02:30 :: [x86_64] #100 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Oct-05 12:02:56 :: [i586] #100 openscada-DB.SQLite: install check OK
2018-Oct-05 12:03:07 :: [aarch64] #100 openscada-DAQ.LogicLev: install check OK
2018-Oct-05 12:03:15 :: [x86_64] #100 openscada-Protocol.SelfSystem: install check OK
2018-Oct-05 12:03:47 :: [i586] #100 openscada-DB.SQLite-debuginfo: install check OK
2018-Oct-05 12:04:03 :: [x86_64] #100 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Oct-05 12:04:41 :: [i586] #100 openscada-LibDB.Main: install check OK
2018-Oct-05 12:04:56 :: [aarch64] #100 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Oct-05 12:05:00 :: [x86_64] #100 openscada-Protocol.UserProtocol: install check OK
2018-Oct-05 12:05:42 :: [i586] #100 openscada-LibDB.VCA: install check OK
2018-Oct-05 12:05:54 :: [x86_64] #100 openscada-Protocol.UserProtocol-debuginfo: install check OK
2018-Oct-05 12:06:34 :: [i586] #100 openscada-Model.AGLKS: install check OK
2018-Oct-05 12:06:43 :: [aarch64] #100 openscada-DAQ.MMS: install check OK
2018-Oct-05 12:06:47 :: [x86_64] #100 openscada-Special.FLibComplex1: install check OK
2018-Oct-05 12:07:30 :: [i586] #100 openscada-Model.Boiler: install check OK
2018-Oct-05 12:07:45 :: [x86_64] #100 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Oct-05 12:08:27 :: [i586] #100 openscada-Protocol.HTTP: install check OK
2018-Oct-05 12:08:32 :: [aarch64] #100 openscada-DAQ.MMS-debuginfo: install check OK
2018-Oct-05 12:08:36 :: [x86_64] #100 openscada-Special.FLibMath: install check OK
2018-Oct-05 12:09:24 :: [i586] #100 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Oct-05 12:09:31 :: [x86_64] #100 openscada-Special.FLibMath-debuginfo: install check OK
2018-Oct-05 12:10:18 :: [x86_64] #100 openscada-Special.FLibSYS: install check OK
2018-Oct-05 12:10:18 :: [aarch64] #100 openscada-DAQ.ModBus: install check OK
2018-Oct-05 12:10:19 :: [i586] #100 openscada-Protocol.SelfSystem: install check OK
2018-Oct-05 12:11:12 :: [i586] #100 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Oct-05 12:11:26 :: [x86_64] #100 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Oct-05 12:12:07 :: [aarch64] #100 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Oct-05 12:12:20 :: [x86_64] #100 openscada-Special.SystemTests: install check OK
2018-Oct-05 12:12:21 :: [i586] #100 openscada-Protocol.UserProtocol: install check OK
2018-Oct-05 12:13:06 :: [x86_64] #100 openscada-Special.SystemTests-debuginfo: install check OK
2018-Oct-05 12:13:20 :: [i586] #100 openscada-Protocol.UserProtocol-debuginfo: install check OK
2018-Oct-05 12:13:50 :: [x86_64] #100 openscada-Transport.SSL: install check OK
2018-Oct-05 12:13:52 :: [aarch64] #100 openscada-DAQ.OPC_UA: install check OK
2018-Oct-05 12:14:08 :: [i586] #100 openscada-Special.FLibComplex1: install check OK
2018-Oct-05 12:14:44 :: [x86_64] #100 openscada-Transport.SSL-debuginfo: install check OK
2018-Oct-05 12:15:02 :: [i586] #100 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Oct-05 12:15:28 :: [x86_64] #100 openscada-Transport.Serial: install check OK
2018-Oct-05 12:15:41 :: [aarch64] #100 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Oct-05 12:15:49 :: [i586] #100 openscada-Special.FLibMath: install check OK
2018-Oct-05 12:16:15 :: [x86_64] #100 openscada-Transport.Serial-debuginfo: install check OK
2018-Oct-05 12:16:38 :: [i586] #100 openscada-Special.FLibMath-debuginfo: install check OK
2018-Oct-05 12:16:59 :: [x86_64] #100 openscada-Transport.Sockets: install check OK
2018-Oct-05 12:17:27 :: [i586] #100 openscada-Special.FLibSYS: install check OK
2018-Oct-05 12:17:28 :: [aarch64] #100 openscada-DAQ.SNMP: install check OK
2018-Oct-05 12:17:50 :: [x86_64] #100 openscada-Transport.Sockets-debuginfo: install check OK
2018-Oct-05 12:18:36 :: [i586] #100 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Oct-05 12:18:59 :: [x86_64] #100 openscada-UI.QTCfg: install check OK
2018-Oct-05 12:19:28 :: [aarch64] #100 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Oct-05 12:19:48 :: [i586] #100 openscada-Special.SystemTests: install check OK
2018-Oct-05 12:20:22 :: [x86_64] #100 openscada-UI.QTCfg-debuginfo: install check OK
2018-Oct-05 12:20:58 :: [i586] #100 openscada-Special.SystemTests-debuginfo: install check OK
2018-Oct-05 12:21:16 :: [x86_64] #100 openscada-UI.QTStarter: install check OK
2018-Oct-05 12:21:20 :: [aarch64] #100 openscada-DAQ.Siemens: install check OK
2018-Oct-05 12:21:46 :: [i586] #100 openscada-Transport.SSL: install check OK
2018-Oct-05 12:22:30 :: [x86_64] #100 openscada-UI.QTStarter-debuginfo: install check OK
2018-Oct-05 12:22:38 :: [i586] #100 openscada-Transport.SSL-debuginfo: install check OK
2018-Oct-05 12:23:18 :: [x86_64] #100 openscada-UI.VCAEngine: install check OK
2018-Oct-05 12:23:31 :: [i586] #100 openscada-Transport.Serial: install check OK
2018-Oct-05 12:24:06 :: [x86_64] #100 openscada-UI.VCAEngine-debuginfo: install check OK
2018-Oct-05 12:24:10 :: [aarch64] #100 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Oct-05 12:24:21 :: [i586] #100 openscada-Transport.Serial-debuginfo: install check OK
2018-Oct-05 12:24:52 :: [x86_64] #100 openscada-UI.Vision: install check OK
2018-Oct-05 12:25:10 :: [i586] #100 openscada-Transport.Sockets: install check OK
2018-Oct-05 12:26:01 :: [i586] #100 openscada-Transport.Sockets-debuginfo: install check OK
2018-Oct-05 12:26:11 :: [x86_64] #100 openscada-UI.Vision-debuginfo: install check OK
2018-Oct-05 12:26:21 :: [aarch64] #100 openscada-DAQ.SoundCard: install check OK
2018-Oct-05 12:26:49 :: [i586] #100 openscada-UI.QTCfg: install check OK
2018-Oct-05 12:26:56 :: [x86_64] #100 openscada-UI.WebCfg: install check OK
2018-Oct-05 12:27:44 :: [x86_64] #100 openscada-UI.WebCfg-debuginfo: install check OK
2018-Oct-05 12:27:51 :: [i586] #100 openscada-UI.QTCfg-debuginfo: install check OK
2018-Oct-05 12:28:23 :: [aarch64] #100 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Oct-05 12:28:30 :: [x86_64] #100 openscada-UI.WebCfgD: install check OK
2018-Oct-05 12:28:40 :: [i586] #100 openscada-UI.QTStarter: install check OK
2018-Oct-05 12:29:26 :: [x86_64] #100 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Oct-05 12:30:13 :: [x86_64] #100 openscada-UI.WebUser: install check OK
2018-Oct-05 12:30:19 :: [i586] #100 openscada-UI.QTStarter-debuginfo: install check OK
2018-Oct-05 12:30:31 :: [aarch64] #100 openscada-DAQ.System: install check OK
2018-Oct-05 12:31:00 :: [x86_64] #100 openscada-UI.WebUser-debuginfo: install check OK
2018-Oct-05 12:31:09 :: [i586] #100 openscada-UI.VCAEngine: install check OK
2018-Oct-05 12:31:45 :: [x86_64] #100 openscada-UI.WebVision: install check OK
2018-Oct-05 12:32:00 :: [i586] #100 openscada-UI.VCAEngine-debuginfo: install check OK
2018-Oct-05 12:32:35 :: [x86_64] #100 openscada-UI.WebVision-debuginfo: install check OK
2018-Oct-05 12:32:47 :: [aarch64] #100 openscada-DAQ.System-debuginfo: install check OK
2018-Oct-05 12:32:53 :: [i586] #100 openscada-UI.Vision: install check OK
x86_64: openscada-core=0.9.0-alt2 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Oct-05 12:33:20 :: [x86_64] #100 openscada-core: install check OK
2018-Oct-05 12:34:06 :: [x86_64] #100 openscada-core-debuginfo: install check OK
2018-Oct-05 12:34:19 :: [x86_64] #100 openscada-devel: no need to repeat, install check SKIPPED
2018-Oct-05 12:34:24 :: [i586] #100 openscada-UI.Vision-debuginfo: install check OK
2018-Oct-05 12:34:32 :: [x86_64] #100 openscada-docEN: no need to repeat, install check SKIPPED
2018-Oct-05 12:34:45 :: [x86_64] #100 openscada-docRU: no need to repeat, install check SKIPPED
2018-Oct-05 12:34:53 :: [aarch64] #100 openscada-DB.DBF: install check OK
2018-Oct-05 12:34:57 :: [x86_64] #100 openscada-docUK: no need to repeat, install check SKIPPED
2018-Oct-05 12:35:11 :: [i586] #100 openscada-UI.WebCfg: install check OK
2018-Oct-05 12:35:40 :: [x86_64] #100 openscada-plc: install check OK
2018-Oct-05 12:36:00 :: [i586] #100 openscada-UI.WebCfg-debuginfo: install check OK
2018-Oct-05 12:36:25 :: [x86_64] #100 openscada-server: install check OK
2018-Oct-05 12:36:47 :: [i586] #100 openscada-UI.WebCfgD: install check OK
2018-Oct-05 12:37:09 :: [aarch64] #100 openscada-DB.DBF-debuginfo: install check OK
2018-Oct-05 12:37:09 :: [x86_64] #100 openscada-visStation: install check OK
2018-Oct-05 12:37:36 :: [i586] #100 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Oct-05 12:38:23 :: [i586] #100 openscada-UI.WebUser: install check OK
2018-Oct-05 12:39:13 :: [i586] #100 openscada-UI.WebUser-debuginfo: install check OK
2018-Oct-05 12:39:19 :: [aarch64] #100 openscada-DB.FireBird: install check OK
2018-Oct-05 12:40:00 :: [i586] #100 openscada-UI.WebVision: install check OK
2018-Oct-05 12:40:54 :: [i586] #100 openscada-UI.WebVision-debuginfo: install check OK
2018-Oct-05 12:41:14 :: [aarch64] #100 openscada-DB.FireBird-debuginfo: install check OK
i586: openscada-core=0.9.0-alt2 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Oct-05 12:41:41 :: [i586] #100 openscada-core: install check OK
2018-Oct-05 12:42:32 :: [i586] #100 openscada-core-debuginfo: install check OK
2018-Oct-05 12:42:46 :: [i586] #100 openscada-devel: no need to repeat, install check SKIPPED
2018-Oct-05 12:42:59 :: [i586] #100 openscada-docEN: no need to repeat, install check SKIPPED
2018-Oct-05 12:43:04 :: [aarch64] #100 openscada-DB.MySQL: install check OK
2018-Oct-05 12:43:12 :: [i586] #100 openscada-docRU: no need to repeat, install check SKIPPED
2018-Oct-05 12:43:25 :: [i586] #100 openscada-docUK: no need to repeat, install check SKIPPED
2018-Oct-05 12:44:12 :: [i586] #100 openscada-plc: install check OK
2018-Oct-05 12:44:58 :: [aarch64] #100 openscada-DB.MySQL-debuginfo: install check OK
2018-Oct-05 12:45:01 :: [i586] #100 openscada-server: install check OK
2018-Oct-05 12:45:49 :: [i586] #100 openscada-visStation: install check OK
2018-Oct-05 12:47:00 :: [aarch64] #100 openscada-DB.PostgreSQL: install check OK
2018-Oct-05 12:49:20 :: [aarch64] #100 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Oct-05 12:51:06 :: [aarch64] #100 openscada-DB.SQLite: install check OK
2018-Oct-05 12:53:05 :: [aarch64] #100 openscada-DB.SQLite-debuginfo: install check OK
2018-Oct-05 12:54:56 :: [aarch64] #100 openscada-LibDB.Main: install check OK
2018-Oct-05 12:56:44 :: [aarch64] #100 openscada-LibDB.VCA: install check OK
2018-Oct-05 12:58:33 :: [aarch64] #100 openscada-Model.AGLKS: install check OK
2018-Oct-05 13:00:27 :: [aarch64] #100 openscada-Model.Boiler: install check OK
2018-Oct-05 13:02:08 :: [aarch64] #100 openscada-Protocol.HTTP: install check OK
2018-Oct-05 13:03:51 :: [aarch64] #100 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Oct-05 13:05:30 :: [aarch64] #100 openscada-Protocol.SelfSystem: install check OK
2018-Oct-05 13:07:16 :: [aarch64] #100 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Oct-05 13:08:59 :: [aarch64] #100 openscada-Protocol.UserProtocol: install check OK
2018-Oct-05 13:10:54 :: [aarch64] #100 openscada-Protocol.UserProtocol-debuginfo: install check OK
2018-Oct-05 13:12:56 :: [aarch64] #100 openscada-Special.FLibComplex1: install check OK
2018-Oct-05 13:15:06 :: [aarch64] #100 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Oct-05 13:16:56 :: [aarch64] #100 openscada-Special.FLibMath: install check OK
2018-Oct-05 13:18:53 :: [aarch64] #100 openscada-Special.FLibMath-debuginfo: install check OK
2018-Oct-05 13:20:45 :: [aarch64] #100 openscada-Special.FLibSYS: install check OK
2018-Oct-05 13:22:41 :: [aarch64] #100 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Oct-05 13:24:32 :: [aarch64] #100 openscada-Special.SystemTests: install check OK
2018-Oct-05 13:26:39 :: [aarch64] #100 openscada-Special.SystemTests-debuginfo: install check OK
2018-Oct-05 13:28:39 :: [aarch64] #100 openscada-Transport.SSL: install check OK
2018-Oct-05 13:30:39 :: [aarch64] #100 openscada-Transport.SSL-debuginfo: install check OK
2018-Oct-05 13:32:23 :: [aarch64] #100 openscada-Transport.Serial: install check OK
2018-Oct-05 13:34:17 :: [aarch64] #100 openscada-Transport.Serial-debuginfo: install check OK
2018-Oct-05 13:36:04 :: [aarch64] #100 openscada-Transport.Sockets: install check OK
2018-Oct-05 13:37:51 :: [aarch64] #100 openscada-Transport.Sockets-debuginfo: install check OK
2018-Oct-05 13:39:36 :: [aarch64] #100 openscada-UI.QTCfg: install check OK
2018-Oct-05 13:41:37 :: [aarch64] #100 openscada-UI.QTCfg-debuginfo: install check OK
2018-Oct-05 13:43:23 :: [aarch64] #100 openscada-UI.QTStarter: install check OK
2018-Oct-05 13:45:44 :: [aarch64] #100 openscada-UI.QTStarter-debuginfo: install check OK
2018-Oct-05 13:47:32 :: [aarch64] #100 openscada-UI.VCAEngine: install check OK
2018-Oct-05 13:49:23 :: [aarch64] #100 openscada-UI.VCAEngine-debuginfo: install check OK
2018-Oct-05 13:51:07 :: [aarch64] #100 openscada-UI.Vision: install check OK
2018-Oct-05 13:53:26 :: [aarch64] #100 openscada-UI.Vision-debuginfo: install check OK
2018-Oct-05 13:55:10 :: [aarch64] #100 openscada-UI.WebCfg: install check OK
2018-Oct-05 13:56:57 :: [aarch64] #100 openscada-UI.WebCfg-debuginfo: install check OK
2018-Oct-05 13:58:38 :: [aarch64] #100 openscada-UI.WebCfgD: install check OK
2018-Oct-05 14:00:26 :: [aarch64] #100 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Oct-05 14:02:06 :: [aarch64] #100 openscada-UI.WebUser: install check OK
2018-Oct-05 14:04:04 :: [aarch64] #100 openscada-UI.WebUser-debuginfo: install check OK
2018-Oct-05 14:05:46 :: [aarch64] #100 openscada-UI.WebVision: install check OK
2018-Oct-05 14:07:39 :: [aarch64] #100 openscada-UI.WebVision-debuginfo: install check OK
aarch64: openscada-core=0.9.0-alt2 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Oct-05 14:09:24 :: [aarch64] #100 openscada-core: install check OK
2018-Oct-05 14:11:10 :: [aarch64] #100 openscada-core-debuginfo: install check OK
2018-Oct-05 14:11:50 :: [aarch64] #100 openscada-devel: no need to repeat, install check SKIPPED
2018-Oct-05 14:12:23 :: [aarch64] #100 openscada-docEN: no need to repeat, install check SKIPPED
2018-Oct-05 14:13:00 :: [aarch64] #100 openscada-docRU: no need to repeat, install check SKIPPED
2018-Oct-05 14:13:35 :: [aarch64] #100 openscada-docUK: no need to repeat, install check SKIPPED
2018-Oct-05 14:15:54 :: [aarch64] #100 openscada-plc: install check OK
2018-Oct-05 14:17:38 :: [aarch64] #100 openscada-server: install check OK
2018-Oct-05 14:19:21 :: [aarch64] #100 openscada-visStation: install check OK
2018-Oct-05 14:19:34 :: [x86_64-i586] plan: #45 +45 -45 =11285
2018-Oct-05 14:20:15 :: [i586] remote arepo: failed to build i586-openscada-DAQ.DiamondBoards-0.9.0-alt2.i586.rpm
2018-Oct-05 14:20:15 :: [x86_64-i586] remote build FAILED
2018-Oct-05 14:20:15 :: [x86_64-i586] build FAILED
2018-Oct-05 14:20:15 :: task #213841 for sisyphus FAILED
More information about the Sisyphus-incominger
mailing list