[#213841] FAILED (try 4) openscada.git=0.9.0-alt2

Thu Oct 4 20:07:23 MSK 2018

http://git.altlinux.org/tasks/213841/logs/events.4.1.log

2018-Oct-04 15:59:25 :: test-only task #213841 for sisyphus resumed by antohami:
#100 build 0.9.0-alt2 from /people/antohami/packages/openscada.git fetched at 2018-Oct-01 11:08:29
2018-Oct-04 15:59:26 :: [i586] #100 openscada.git 0.9.0-alt2: build start
2018-Oct-04 15:59:26 :: [aarch64] #100 openscada.git 0.9.0-alt2: build start
2018-Oct-04 15:59:26 :: [x86_64] #100 openscada.git 0.9.0-alt2: build start
2018-Oct-04 15:59:58 :: [i586] openscada.git 0.9.0-alt2: remote: no need to rebuild
2018-Oct-04 15:59:58 :: [i586] #100 openscada.git 0.9.0-alt2: build OK
2018-Oct-04 15:59:58 :: [x86_64] openscada.git 0.9.0-alt2: remote: no need to rebuild
2018-Oct-04 15:59:59 :: [x86_64] #100 openscada.git 0.9.0-alt2: build OK
2018-Oct-04 16:00:32 :: [aarch64] openscada.git 0.9.0-alt2: remote: no need to rebuild
2018-Oct-04 16:00:32 :: [aarch64] #100 openscada.git 0.9.0-alt2: build OK
2018-Oct-04 16:03:14 :: build check OK
2018-Oct-04 16:04:42 :: noarch check OK
2018-Oct-04 16:04:43 :: plan: src +1 -1 =18658, aarch64 +88 -88 =29437, i586 +92 -92 =33773, noarch +10 -10 =19118, x86_64 +88 -88 =33844
2018-Oct-04 16:04:43 :: version check OK
2018-Oct-04 16:05:51 :: generated apt indices
2018-Oct-04 16:05:51 :: created next repo
2018-Oct-04 16:06:11 :: dependencies check OK
2018-Oct-04 16:07:06 :: ELF symbols check OK
2018-Oct-04 16:07:24 :: [x86_64] #100 libopenscada: no need to repeat, install check SKIPPED
2018-Oct-04 16:07:24 :: [i586] #100 libopenscada: no need to repeat, install check SKIPPED
2018-Oct-04 16:07:37 :: [x86_64] #100 libopenscada-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:07:38 :: [i586] #100 libopenscada-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:07:52 :: [x86_64] #100 openscada: no need to repeat, install check SKIPPED
2018-Oct-04 16:07:52 :: [i586] #100 openscada: no need to repeat, install check SKIPPED
2018-Oct-04 16:07:54 :: [aarch64] #100 libopenscada: no need to repeat, install check SKIPPED
2018-Oct-04 16:08:06 :: [x86_64] #100 openscada-Archive.DBArch: no need to repeat, install check SKIPPED
2018-Oct-04 16:08:06 :: [i586] #100 openscada-Archive.DBArch: no need to repeat, install check SKIPPED
2018-Oct-04 16:08:19 :: [i586] #100 openscada-Archive.DBArch-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:08:19 :: [x86_64] #100 openscada-Archive.DBArch-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:08:29 :: [aarch64] #100 libopenscada-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:08:33 :: [i586] #100 openscada-Archive.FSArch: no need to repeat, install check SKIPPED
2018-Oct-04 16:08:33 :: [x86_64] #100 openscada-Archive.FSArch: no need to repeat, install check SKIPPED
2018-Oct-04 16:08:46 :: [i586] #100 openscada-Archive.FSArch-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:08:47 :: [x86_64] #100 openscada-Archive.FSArch-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:08:59 :: [i586] #100 openscada-DAQ.AMRDevs: no need to repeat, install check SKIPPED
2018-Oct-04 16:09:00 :: [x86_64] #100 openscada-DAQ.AMRDevs: no need to repeat, install check SKIPPED
2018-Oct-04 16:09:07 :: [aarch64] #100 openscada: no need to repeat, install check SKIPPED
2018-Oct-04 16:09:12 :: [i586] #100 openscada-DAQ.AMRDevs-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:09:14 :: [x86_64] #100 openscada-DAQ.AMRDevs-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:09:25 :: [i586] #100 openscada-DAQ.BFN: no need to repeat, install check SKIPPED
2018-Oct-04 16:09:27 :: [x86_64] #100 openscada-DAQ.BFN: no need to repeat, install check SKIPPED
2018-Oct-04 16:09:38 :: [i586] #100 openscada-DAQ.BFN-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:09:41 :: [x86_64] #100 openscada-DAQ.BFN-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:09:43 :: [aarch64] #100 openscada-Archive.DBArch: no need to repeat, install check SKIPPED
2018-Oct-04 16:09:52 :: [i586] #100 openscada-DAQ.BlockCalc: no need to repeat, install check SKIPPED
2018-Oct-04 16:09:55 :: [x86_64] #100 openscada-DAQ.BlockCalc: no need to repeat, install check SKIPPED
2018-Oct-04 16:10:05 :: [i586] #100 openscada-DAQ.BlockCalc-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:10:08 :: [x86_64] #100 openscada-DAQ.BlockCalc-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:10:19 :: [i586] #100 openscada-DAQ.Comedi: no need to repeat, install check SKIPPED
2018-Oct-04 16:10:19 :: [aarch64] #100 openscada-Archive.DBArch-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:10:22 :: [x86_64] #100 openscada-DAQ.Comedi: no need to repeat, install check SKIPPED
2018-Oct-04 16:10:32 :: [i586] #100 openscada-DAQ.Comedi-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:10:36 :: [x86_64] #100 openscada-DAQ.Comedi-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:10:45 :: [i586] #100 openscada-DAQ.DAQGate: no need to repeat, install check SKIPPED
2018-Oct-04 16:10:49 :: [x86_64] #100 openscada-DAQ.DAQGate: no need to repeat, install check SKIPPED
2018-Oct-04 16:10:55 :: [aarch64] #100 openscada-Archive.FSArch: no need to repeat, install check SKIPPED
2018-Oct-04 16:10:59 :: [i586] #100 openscada-DAQ.DAQGate-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:11:03 :: [x86_64] #100 openscada-DAQ.DAQGate-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:11:12 :: [i586] #100 openscada-DAQ.DCON: no need to repeat, install check SKIPPED
2018-Oct-04 16:11:16 :: [x86_64] #100 openscada-DAQ.DCON: no need to repeat, install check SKIPPED
2018-Oct-04 16:11:25 :: [i586] #100 openscada-DAQ.DCON-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:11:29 :: [x86_64] #100 openscada-DAQ.DCON-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:11:30 :: [aarch64] #100 openscada-Archive.FSArch-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:11:39 :: [i586] #100 openscada-DAQ.DiamondBoards: no need to repeat, install check SKIPPED
2018-Oct-04 16:11:43 :: [x86_64] #100 openscada-DAQ.GPIO: no need to repeat, install check SKIPPED
2018-Oct-04 16:11:53 :: [i586] #100 openscada-DAQ.DiamondBoards-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:11:56 :: [x86_64] #100 openscada-DAQ.GPIO-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:12:06 :: [aarch64] #100 openscada-DAQ.AMRDevs: no need to repeat, install check SKIPPED
2018-Oct-04 16:12:06 :: [i586] #100 openscada-DAQ.GPIO: no need to repeat, install check SKIPPED
2018-Oct-04 16:12:10 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc: no need to repeat, install check SKIPPED
2018-Oct-04 16:12:19 :: [i586] #100 openscada-DAQ.GPIO-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:12:23 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:12:33 :: [i586] #100 openscada-DAQ.ICP_DAS: no need to repeat, install check SKIPPED
2018-Oct-04 16:12:37 :: [x86_64] #100 openscada-DAQ.LogicLev: no need to repeat, install check SKIPPED
2018-Oct-04 16:12:43 :: [aarch64] #100 openscada-DAQ.AMRDevs-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:12:46 :: [i586] #100 openscada-DAQ.ICP_DAS-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:12:50 :: [x86_64] #100 openscada-DAQ.LogicLev-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:12:59 :: [i586] #100 openscada-DAQ.JavaLikeCalc: no need to repeat, install check SKIPPED
2018-Oct-04 16:13:03 :: [x86_64] #100 openscada-DAQ.MMS: no need to repeat, install check SKIPPED
2018-Oct-04 16:13:12 :: [i586] #100 openscada-DAQ.JavaLikeCalc-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:13:17 :: [x86_64] #100 openscada-DAQ.MMS-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:13:19 :: [aarch64] #100 openscada-DAQ.BFN: no need to repeat, install check SKIPPED
2018-Oct-04 16:13:26 :: [i586] #100 openscada-DAQ.LogicLev: no need to repeat, install check SKIPPED
2018-Oct-04 16:13:31 :: [x86_64] #100 openscada-DAQ.ModBus: no need to repeat, install check SKIPPED
2018-Oct-04 16:13:39 :: [i586] #100 openscada-DAQ.LogicLev-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:13:44 :: [x86_64] #100 openscada-DAQ.ModBus-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:13:53 :: [i586] #100 openscada-DAQ.MMS: no need to repeat, install check SKIPPED
2018-Oct-04 16:13:56 :: [aarch64] #100 openscada-DAQ.BFN-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:13:57 :: [x86_64] #100 openscada-DAQ.OPC_UA: no need to repeat, install check SKIPPED
2018-Oct-04 16:14:06 :: [i586] #100 openscada-DAQ.MMS-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:14:11 :: [x86_64] #100 openscada-DAQ.OPC_UA-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:14:19 :: [i586] #100 openscada-DAQ.ModBus: no need to repeat, install check SKIPPED
2018-Oct-04 16:14:24 :: [x86_64] #100 openscada-DAQ.SNMP: no need to repeat, install check SKIPPED
2018-Oct-04 16:14:32 :: [i586] #100 openscada-DAQ.ModBus-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:14:34 :: [aarch64] #100 openscada-DAQ.BlockCalc: no need to repeat, install check SKIPPED
2018-Oct-04 16:14:39 :: [x86_64] #100 openscada-DAQ.SNMP-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:14:46 :: [i586] #100 openscada-DAQ.OPC_UA: no need to repeat, install check SKIPPED
2018-Oct-04 16:14:52 :: [x86_64] #100 openscada-DAQ.Siemens: no need to repeat, install check SKIPPED
2018-Oct-04 16:14:59 :: [i586] #100 openscada-DAQ.OPC_UA-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:15:06 :: [x86_64] #100 openscada-DAQ.Siemens-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:15:10 :: [aarch64] #100 openscada-DAQ.BlockCalc-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:15:12 :: [i586] #100 openscada-DAQ.SNMP: no need to repeat, install check SKIPPED
2018-Oct-04 16:15:20 :: [x86_64] #100 openscada-DAQ.SoundCard: no need to repeat, install check SKIPPED
2018-Oct-04 16:15:25 :: [i586] #100 openscada-DAQ.SNMP-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:15:33 :: [x86_64] #100 openscada-DAQ.SoundCard-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:15:38 :: [i586] #100 openscada-DAQ.Siemens: no need to repeat, install check SKIPPED
2018-Oct-04 16:15:47 :: [aarch64] #100 openscada-DAQ.Comedi: no need to repeat, install check SKIPPED
2018-Oct-04 16:15:47 :: [x86_64] #100 openscada-DAQ.System: no need to repeat, install check SKIPPED
2018-Oct-04 16:15:52 :: [i586] #100 openscada-DAQ.Siemens-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:16:01 :: [x86_64] #100 openscada-DAQ.System-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:16:05 :: [i586] #100 openscada-DAQ.SoundCard: no need to repeat, install check SKIPPED
2018-Oct-04 16:16:15 :: [x86_64] #100 openscada-DB.DBF: no need to repeat, install check SKIPPED
2018-Oct-04 16:16:18 :: [i586] #100 openscada-DAQ.SoundCard-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:16:22 :: [aarch64] #100 openscada-DAQ.Comedi-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:16:28 :: [x86_64] #100 openscada-DB.DBF-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:16:31 :: [i586] #100 openscada-DAQ.System: no need to repeat, install check SKIPPED
2018-Oct-04 16:16:42 :: [x86_64] #100 openscada-DB.FireBird: no need to repeat, install check SKIPPED
2018-Oct-04 16:16:46 :: [i586] #100 openscada-DAQ.System-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:16:55 :: [x86_64] #100 openscada-DB.FireBird-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:16:56 :: [aarch64] #100 openscada-DAQ.DAQGate: no need to repeat, install check SKIPPED
2018-Oct-04 16:16:59 :: [i586] #100 openscada-DB.DBF: no need to repeat, install check SKIPPED
2018-Oct-04 16:17:09 :: [x86_64] #100 openscada-DB.MySQL: no need to repeat, install check SKIPPED
2018-Oct-04 16:17:12 :: [i586] #100 openscada-DB.DBF-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:17:23 :: [x86_64] #100 openscada-DB.MySQL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:17:25 :: [i586] #100 openscada-DB.FireBird: no need to repeat, install check SKIPPED
2018-Oct-04 16:17:31 :: [aarch64] #100 openscada-DAQ.DAQGate-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:17:36 :: [x86_64] #100 openscada-DB.PostgreSQL: no need to repeat, install check SKIPPED
2018-Oct-04 16:17:39 :: [i586] #100 openscada-DB.FireBird-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:17:50 :: [x86_64] #100 openscada-DB.PostgreSQL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:17:53 :: [i586] #100 openscada-DB.MySQL: no need to repeat, install check SKIPPED
2018-Oct-04 16:18:04 :: [x86_64] #100 openscada-DB.SQLite: no need to repeat, install check SKIPPED
2018-Oct-04 16:18:06 :: [aarch64] #100 openscada-DAQ.DCON: no need to repeat, install check SKIPPED
2018-Oct-04 16:18:07 :: [i586] #100 openscada-DB.MySQL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:18:17 :: [x86_64] #100 openscada-DB.SQLite-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:18:21 :: [i586] #100 openscada-DB.PostgreSQL: no need to repeat, install check SKIPPED
2018-Oct-04 16:18:31 :: [x86_64] #100 openscada-LibDB.Main: no need to repeat, install check SKIPPED
2018-Oct-04 16:18:35 :: [i586] #100 openscada-DB.PostgreSQL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:18:41 :: [aarch64] #100 openscada-DAQ.DCON-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:18:45 :: [x86_64] #100 openscada-LibDB.VCA: no need to repeat, install check SKIPPED
2018-Oct-04 16:18:49 :: [i586] #100 openscada-DB.SQLite: no need to repeat, install check SKIPPED
2018-Oct-04 16:18:58 :: [x86_64] #100 openscada-Model.AGLKS: no need to repeat, install check SKIPPED
2018-Oct-04 16:19:02 :: [i586] #100 openscada-DB.SQLite-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:19:12 :: [x86_64] #100 openscada-Model.Boiler: no need to repeat, install check SKIPPED
2018-Oct-04 16:19:16 :: [i586] #100 openscada-LibDB.Main: no need to repeat, install check SKIPPED
2018-Oct-04 16:19:18 :: [aarch64] #100 openscada-DAQ.GPIO: no need to repeat, install check SKIPPED
2018-Oct-04 16:19:25 :: [x86_64] #100 openscada-Protocol.HTTP: no need to repeat, install check SKIPPED
2018-Oct-04 16:19:29 :: [i586] #100 openscada-LibDB.VCA: no need to repeat, install check SKIPPED
2018-Oct-04 16:19:39 :: [x86_64] #100 openscada-Protocol.HTTP-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:19:42 :: [i586] #100 openscada-Model.AGLKS: no need to repeat, install check SKIPPED
2018-Oct-04 16:19:53 :: [x86_64] #100 openscada-Protocol.SelfSystem: no need to repeat, install check SKIPPED
2018-Oct-04 16:19:54 :: [aarch64] #100 openscada-DAQ.GPIO-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:19:56 :: [i586] #100 openscada-Model.Boiler: no need to repeat, install check SKIPPED
2018-Oct-04 16:20:07 :: [x86_64] #100 openscada-Protocol.SelfSystem-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:20:09 :: [i586] #100 openscada-Protocol.HTTP: no need to repeat, install check SKIPPED
2018-Oct-04 16:20:20 :: [x86_64] #100 openscada-Protocol.UserProtocol: no need to repeat, install check SKIPPED
2018-Oct-04 16:20:22 :: [i586] #100 openscada-Protocol.HTTP-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:20:29 :: [aarch64] #100 openscada-DAQ.JavaLikeCalc: no need to repeat, install check SKIPPED
2018-Oct-04 16:20:34 :: [x86_64] #100 openscada-Protocol.UserProtocol-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:20:35 :: [i586] #100 openscada-Protocol.SelfSystem: no need to repeat, install check SKIPPED
2018-Oct-04 16:20:47 :: [x86_64] #100 openscada-Special.FLibComplex1: no need to repeat, install check SKIPPED
2018-Oct-04 16:20:49 :: [i586] #100 openscada-Protocol.SelfSystem-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:21:01 :: [x86_64] #100 openscada-Special.FLibComplex1-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:21:02 :: [i586] #100 openscada-Protocol.UserProtocol: no need to repeat, install check SKIPPED
2018-Oct-04 16:21:06 :: [aarch64] #100 openscada-DAQ.JavaLikeCalc-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:21:16 :: [x86_64] #100 openscada-Special.FLibMath: no need to repeat, install check SKIPPED
2018-Oct-04 16:21:16 :: [i586] #100 openscada-Protocol.UserProtocol-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:21:29 :: [i586] #100 openscada-Special.FLibComplex1: no need to repeat, install check SKIPPED
2018-Oct-04 16:21:29 :: [x86_64] #100 openscada-Special.FLibMath-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:21:41 :: [aarch64] #100 openscada-DAQ.LogicLev: no need to repeat, install check SKIPPED
2018-Oct-04 16:21:42 :: [i586] #100 openscada-Special.FLibComplex1-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:21:43 :: [x86_64] #100 openscada-Special.FLibSYS: no need to repeat, install check SKIPPED
2018-Oct-04 16:21:56 :: [i586] #100 openscada-Special.FLibMath: no need to repeat, install check SKIPPED
2018-Oct-04 16:21:57 :: [x86_64] #100 openscada-Special.FLibSYS-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:22:09 :: [i586] #100 openscada-Special.FLibMath-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:22:10 :: [x86_64] #100 openscada-Special.SystemTests: no need to repeat, install check SKIPPED
2018-Oct-04 16:22:16 :: [aarch64] #100 openscada-DAQ.LogicLev-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:22:22 :: [i586] #100 openscada-Special.FLibSYS: no need to repeat, install check SKIPPED
2018-Oct-04 16:22:24 :: [x86_64] #100 openscada-Special.SystemTests-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:22:36 :: [i586] #100 openscada-Special.FLibSYS-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:22:37 :: [x86_64] #100 openscada-Transport.SSL: no need to repeat, install check SKIPPED
2018-Oct-04 16:22:49 :: [i586] #100 openscada-Special.SystemTests: no need to repeat, install check SKIPPED
2018-Oct-04 16:22:51 :: [aarch64] #100 openscada-DAQ.MMS: no need to repeat, install check SKIPPED
2018-Oct-04 16:22:51 :: [x86_64] #100 openscada-Transport.SSL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:23:02 :: [i586] #100 openscada-Special.SystemTests-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:23:04 :: [x86_64] #100 openscada-Transport.Serial: no need to repeat, install check SKIPPED
2018-Oct-04 16:23:16 :: [i586] #100 openscada-Transport.SSL: no need to repeat, install check SKIPPED
2018-Oct-04 16:23:19 :: [x86_64] #100 openscada-Transport.Serial-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:23:29 :: [i586] #100 openscada-Transport.SSL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:23:30 :: [aarch64] #100 openscada-DAQ.MMS-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:23:33 :: [x86_64] #100 openscada-Transport.Sockets: no need to repeat, install check SKIPPED
2018-Oct-04 16:23:43 :: [i586] #100 openscada-Transport.Serial: no need to repeat, install check SKIPPED
2018-Oct-04 16:23:47 :: [x86_64] #100 openscada-Transport.Sockets-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:23:57 :: [i586] #100 openscada-Transport.Serial-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:24:01 :: [x86_64] #100 openscada-UI.QTCfg: no need to repeat, install check SKIPPED
2018-Oct-04 16:24:07 :: [aarch64] #100 openscada-DAQ.ModBus: no need to repeat, install check SKIPPED
2018-Oct-04 16:24:10 :: [i586] #100 openscada-Transport.Sockets: no need to repeat, install check SKIPPED
2018-Oct-04 16:24:15 :: [x86_64] #100 openscada-UI.QTCfg-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:24:23 :: [i586] #100 openscada-Transport.Sockets-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:24:28 :: [x86_64] #100 openscada-UI.QTStarter: no need to repeat, install check SKIPPED
2018-Oct-04 16:24:37 :: [i586] #100 openscada-UI.QTCfg: no need to repeat, install check SKIPPED
2018-Oct-04 16:24:43 :: [aarch64] #100 openscada-DAQ.ModBus-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:24:44 :: [x86_64] #100 openscada-UI.QTStarter-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:24:51 :: [i586] #100 openscada-UI.QTCfg-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:24:57 :: [x86_64] #100 openscada-UI.VCAEngine: no need to repeat, install check SKIPPED
2018-Oct-04 16:25:05 :: [i586] #100 openscada-UI.QTStarter: no need to repeat, install check SKIPPED
2018-Oct-04 16:25:10 :: [x86_64] #100 openscada-UI.VCAEngine-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:25:19 :: [i586] #100 openscada-UI.QTStarter-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:25:20 :: [aarch64] #100 openscada-DAQ.OPC_UA: no need to repeat, install check SKIPPED
2018-Oct-04 16:25:23 :: [x86_64] #100 openscada-UI.Vision: no need to repeat, install check SKIPPED
2018-Oct-04 16:25:33 :: [i586] #100 openscada-UI.VCAEngine: no need to repeat, install check SKIPPED
2018-Oct-04 16:25:38 :: [x86_64] #100 openscada-UI.Vision-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:25:46 :: [i586] #100 openscada-UI.VCAEngine-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:25:51 :: [x86_64] #100 openscada-UI.WebCfg: no need to repeat, install check SKIPPED
2018-Oct-04 16:25:56 :: [aarch64] #100 openscada-DAQ.OPC_UA-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:26:00 :: [i586] #100 openscada-UI.Vision: no need to repeat, install check SKIPPED
2018-Oct-04 16:26:05 :: [x86_64] #100 openscada-UI.WebCfg-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:26:14 :: [i586] #100 openscada-UI.Vision-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:26:18 :: [x86_64] #100 openscada-UI.WebCfgD: no need to repeat, install check SKIPPED
2018-Oct-04 16:26:27 :: [i586] #100 openscada-UI.WebCfg: no need to repeat, install check SKIPPED
2018-Oct-04 16:26:31 :: [aarch64] #100 openscada-DAQ.SNMP: no need to repeat, install check SKIPPED
2018-Oct-04 16:26:32 :: [x86_64] #100 openscada-UI.WebCfgD-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:26:40 :: [i586] #100 openscada-UI.WebCfg-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:26:46 :: [x86_64] #100 openscada-UI.WebUser: no need to repeat, install check SKIPPED
2018-Oct-04 16:26:54 :: [i586] #100 openscada-UI.WebCfgD: no need to repeat, install check SKIPPED
2018-Oct-04 16:26:59 :: [x86_64] #100 openscada-UI.WebUser-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:27:05 :: [aarch64] #100 openscada-DAQ.SNMP-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:27:07 :: [i586] #100 openscada-UI.WebCfgD-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:27:12 :: [x86_64] #100 openscada-UI.WebVision: no need to repeat, install check SKIPPED
2018-Oct-04 16:27:21 :: [i586] #100 openscada-UI.WebUser: no need to repeat, install check SKIPPED
2018-Oct-04 16:27:26 :: [x86_64] #100 openscada-UI.WebVision-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:27:34 :: [i586] #100 openscada-UI.WebUser-debuginfo: no need to repeat, install check SKIPPED
	x86_64: openscada-core=0.9.0-alt2 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Oct-04 16:27:39 :: [x86_64] #100 openscada-core: no need to repeat, install check SKIPPED
2018-Oct-04 16:27:43 :: [aarch64] #100 openscada-DAQ.Siemens: no need to repeat, install check SKIPPED
2018-Oct-04 16:27:48 :: [i586] #100 openscada-UI.WebVision: no need to repeat, install check SKIPPED
2018-Oct-04 16:27:53 :: [x86_64] #100 openscada-core-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:28:01 :: [i586] #100 openscada-UI.WebVision-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:28:07 :: [x86_64] #100 openscada-devel: no need to repeat, install check SKIPPED
	i586: openscada-core=0.9.0-alt2 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Oct-04 16:28:15 :: [i586] #100 openscada-core: no need to repeat, install check SKIPPED
2018-Oct-04 16:28:20 :: [x86_64] #100 openscada-docEN: no need to repeat, install check SKIPPED
2018-Oct-04 16:28:22 :: [aarch64] #100 openscada-DAQ.Siemens-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:28:29 :: [i586] #100 openscada-core-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:28:33 :: [x86_64] #100 openscada-docRU: no need to repeat, install check SKIPPED
2018-Oct-04 16:28:42 :: [i586] #100 openscada-devel: no need to repeat, install check SKIPPED
2018-Oct-04 16:28:46 :: [x86_64] #100 openscada-docUK: no need to repeat, install check SKIPPED
2018-Oct-04 16:28:55 :: [i586] #100 openscada-docEN: no need to repeat, install check SKIPPED
2018-Oct-04 16:28:57 :: [aarch64] #100 openscada-DAQ.SoundCard: no need to repeat, install check SKIPPED
2018-Oct-04 16:28:59 :: [x86_64] #100 openscada-plc: no need to repeat, install check SKIPPED
2018-Oct-04 16:29:07 :: [i586] #100 openscada-docRU: no need to repeat, install check SKIPPED
2018-Oct-04 16:29:13 :: [x86_64] #100 openscada-server: no need to repeat, install check SKIPPED
2018-Oct-04 16:29:20 :: [i586] #100 openscada-docUK: no need to repeat, install check SKIPPED
2018-Oct-04 16:29:27 :: [x86_64] #100 openscada-visStation: no need to repeat, install check SKIPPED
2018-Oct-04 16:29:33 :: [aarch64] #100 openscada-DAQ.SoundCard-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:29:34 :: [i586] #100 openscada-plc: no need to repeat, install check SKIPPED
2018-Oct-04 16:29:47 :: [i586] #100 openscada-server: no need to repeat, install check SKIPPED
2018-Oct-04 16:30:01 :: [i586] #100 openscada-visStation: no need to repeat, install check SKIPPED
2018-Oct-04 16:30:10 :: [aarch64] #100 openscada-DAQ.System: no need to repeat, install check SKIPPED
2018-Oct-04 16:30:49 :: [aarch64] #100 openscada-DAQ.System-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:31:28 :: [aarch64] #100 openscada-DB.DBF: no need to repeat, install check SKIPPED
2018-Oct-04 16:32:05 :: [aarch64] #100 openscada-DB.DBF-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:32:44 :: [aarch64] #100 openscada-DB.FireBird: no need to repeat, install check SKIPPED
2018-Oct-04 16:33:21 :: [aarch64] #100 openscada-DB.FireBird-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:34:00 :: [aarch64] #100 openscada-DB.MySQL: no need to repeat, install check SKIPPED
2018-Oct-04 16:34:37 :: [aarch64] #100 openscada-DB.MySQL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:35:12 :: [aarch64] #100 openscada-DB.PostgreSQL: no need to repeat, install check SKIPPED
2018-Oct-04 16:35:50 :: [aarch64] #100 openscada-DB.PostgreSQL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:36:27 :: [aarch64] #100 openscada-DB.SQLite: no need to repeat, install check SKIPPED
2018-Oct-04 16:37:04 :: [aarch64] #100 openscada-DB.SQLite-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:37:42 :: [aarch64] #100 openscada-LibDB.Main: no need to repeat, install check SKIPPED
2018-Oct-04 16:38:18 :: [aarch64] #100 openscada-LibDB.VCA: no need to repeat, install check SKIPPED
2018-Oct-04 16:38:55 :: [aarch64] #100 openscada-Model.AGLKS: no need to repeat, install check SKIPPED
2018-Oct-04 16:39:33 :: [aarch64] #100 openscada-Model.Boiler: no need to repeat, install check SKIPPED
2018-Oct-04 16:40:10 :: [aarch64] #100 openscada-Protocol.HTTP: no need to repeat, install check SKIPPED
2018-Oct-04 16:40:45 :: [aarch64] #100 openscada-Protocol.HTTP-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:41:22 :: [aarch64] #100 openscada-Protocol.SelfSystem: no need to repeat, install check SKIPPED
2018-Oct-04 16:41:58 :: [aarch64] #100 openscada-Protocol.SelfSystem-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:42:34 :: [aarch64] #100 openscada-Protocol.UserProtocol: no need to repeat, install check SKIPPED
2018-Oct-04 16:43:09 :: [aarch64] #100 openscada-Protocol.UserProtocol-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:43:46 :: [aarch64] #100 openscada-Special.FLibComplex1: no need to repeat, install check SKIPPED
2018-Oct-04 16:44:21 :: [aarch64] #100 openscada-Special.FLibComplex1-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:44:57 :: [aarch64] #100 openscada-Special.FLibMath: no need to repeat, install check SKIPPED
2018-Oct-04 16:45:31 :: [aarch64] #100 openscada-Special.FLibMath-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:46:08 :: [aarch64] #100 openscada-Special.FLibSYS: no need to repeat, install check SKIPPED
2018-Oct-04 16:46:42 :: [aarch64] #100 openscada-Special.FLibSYS-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:47:19 :: [aarch64] #100 openscada-Special.SystemTests: no need to repeat, install check SKIPPED
2018-Oct-04 16:47:54 :: [aarch64] #100 openscada-Special.SystemTests-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:48:32 :: [aarch64] #100 openscada-Transport.SSL: no need to repeat, install check SKIPPED
2018-Oct-04 16:49:06 :: [aarch64] #100 openscada-Transport.SSL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:49:42 :: [aarch64] #100 openscada-Transport.Serial: no need to repeat, install check SKIPPED
2018-Oct-04 16:50:19 :: [aarch64] #100 openscada-Transport.Serial-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:50:55 :: [aarch64] #100 openscada-Transport.Sockets: no need to repeat, install check SKIPPED
2018-Oct-04 16:51:32 :: [aarch64] #100 openscada-Transport.Sockets-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:52:08 :: [aarch64] #100 openscada-UI.QTCfg: no need to repeat, install check SKIPPED
2018-Oct-04 16:52:46 :: [aarch64] #100 openscada-UI.QTCfg-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:53:23 :: [aarch64] #100 openscada-UI.QTStarter: no need to repeat, install check SKIPPED
2018-Oct-04 16:53:59 :: [aarch64] #100 openscada-UI.QTStarter-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:54:34 :: [aarch64] #100 openscada-UI.VCAEngine: no need to repeat, install check SKIPPED
2018-Oct-04 16:55:11 :: [aarch64] #100 openscada-UI.VCAEngine-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:55:47 :: [aarch64] #100 openscada-UI.Vision: no need to repeat, install check SKIPPED
2018-Oct-04 16:56:22 :: [aarch64] #100 openscada-UI.Vision-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:56:59 :: [aarch64] #100 openscada-UI.WebCfg: no need to repeat, install check SKIPPED
2018-Oct-04 16:57:36 :: [aarch64] #100 openscada-UI.WebCfg-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:58:12 :: [aarch64] #100 openscada-UI.WebCfgD: no need to repeat, install check SKIPPED
2018-Oct-04 16:58:50 :: [aarch64] #100 openscada-UI.WebCfgD-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 16:59:25 :: [aarch64] #100 openscada-UI.WebUser: no need to repeat, install check SKIPPED
2018-Oct-04 17:00:00 :: [aarch64] #100 openscada-UI.WebUser-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 17:00:37 :: [aarch64] #100 openscada-UI.WebVision: no need to repeat, install check SKIPPED
2018-Oct-04 17:01:13 :: [aarch64] #100 openscada-UI.WebVision-debuginfo: no need to repeat, install check SKIPPED
	aarch64: openscada-core=0.9.0-alt2 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Oct-04 17:01:48 :: [aarch64] #100 openscada-core: no need to repeat, install check SKIPPED
2018-Oct-04 17:02:23 :: [aarch64] #100 openscada-core-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-04 17:02:57 :: [aarch64] #100 openscada-devel: no need to repeat, install check SKIPPED
2018-Oct-04 17:03:32 :: [aarch64] #100 openscada-docEN: no need to repeat, install check SKIPPED
2018-Oct-04 17:04:06 :: [aarch64] #100 openscada-docRU: no need to repeat, install check SKIPPED
2018-Oct-04 17:04:39 :: [aarch64] #100 openscada-docUK: no need to repeat, install check SKIPPED
2018-Oct-04 17:05:16 :: [aarch64] #100 openscada-plc: no need to repeat, install check SKIPPED
2018-Oct-04 17:05:51 :: [aarch64] #100 openscada-server: no need to repeat, install check SKIPPED
2018-Oct-04 17:06:28 :: [aarch64] #100 openscada-visStation: no need to repeat, install check SKIPPED
2018-Oct-04 17:06:42 :: [x86_64-i586] plan: #45 +45 -45 =11285
2018-Oct-04 17:07:22 :: [i586] remote arepo: failed to build i586-openscada-DAQ.DiamondBoards-0.9.0-alt2.i586.rpm
2018-Oct-04 17:07:22 :: [x86_64-i586] remote build FAILED
2018-Oct-04 17:07:22 :: [x86_64-i586] build FAILED
2018-Oct-04 17:07:22 :: task #213841 for sisyphus FAILED