[#213841] FAILED (try 2) openscada.git=0.9.0-alt2

Girar Builder awaiter robot girar-builder at altlinux.org
Mon Oct 1 19:38:48 MSK 2018


http://git.altlinux.org/tasks/213841/logs/events.2.1.log

2018-Oct-01 15:26:28 :: test-only task #213841 for sisyphus resumed by antohami:
#100 build 0.9.0-alt2 from /people/antohami/packages/openscada.git fetched at 2018-Oct-01 11:08:29
2018-Oct-01 15:26:29 :: waiting for a shared lock on sisyphus
2018-Oct-01 15:27:22 :: acquired a shared lock on sisyphus
2018-Oct-01 15:27:23 :: [x86_64] #100 openscada.git 0.9.0-alt2: build start
2018-Oct-01 15:27:23 :: [i586] #100 openscada.git 0.9.0-alt2: build start
2018-Oct-01 15:27:23 :: [aarch64] #100 openscada.git 0.9.0-alt2: build start
2018-Oct-01 15:28:01 :: [i586] openscada.git 0.9.0-alt2: remote: no need to rebuild
2018-Oct-01 15:28:01 :: [i586] #100 openscada.git 0.9.0-alt2: build OK
2018-Oct-01 15:28:02 :: [x86_64] openscada.git 0.9.0-alt2: remote: no need to rebuild
2018-Oct-01 15:28:02 :: [x86_64] #100 openscada.git 0.9.0-alt2: build OK
2018-Oct-01 15:28:31 :: [aarch64] openscada.git 0.9.0-alt2: remote: no need to rebuild
2018-Oct-01 15:28:31 :: [aarch64] #100 openscada.git 0.9.0-alt2: build OK
2018-Oct-01 15:31:28 :: build check OK
2018-Oct-01 15:32:57 :: noarch check OK
2018-Oct-01 15:32:59 :: plan: src +1 -1 =18667, aarch64 +88 -88 =29485, i586 +92 -92 =33940, noarch +10 -10 =19119, x86_64 +88 -88 =34009
2018-Oct-01 15:32:59 :: version check OK
2018-Oct-01 15:34:29 :: generated apt indices
2018-Oct-01 15:34:29 :: created next repo
2018-Oct-01 15:34:49 :: dependencies check OK
2018-Oct-01 15:35:20 :: ELF symbols check OK
2018-Oct-01 15:35:38 :: [x86_64] #100 libopenscada: no need to repeat, install check SKIPPED
2018-Oct-01 15:35:39 :: [i586] #100 libopenscada: no need to repeat, install check SKIPPED
2018-Oct-01 15:35:51 :: [x86_64] #100 libopenscada-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:35:52 :: [i586] #100 libopenscada-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:36:06 :: [x86_64] #100 openscada: no need to repeat, install check SKIPPED
2018-Oct-01 15:36:07 :: [i586] #100 openscada: no need to repeat, install check SKIPPED
2018-Oct-01 15:36:11 :: [aarch64] #100 libopenscada: no need to repeat, install check SKIPPED
2018-Oct-01 15:36:20 :: [i586] #100 openscada-Archive.DBArch: no need to repeat, install check SKIPPED
2018-Oct-01 15:36:20 :: [x86_64] #100 openscada-Archive.DBArch: no need to repeat, install check SKIPPED
2018-Oct-01 15:36:34 :: [i586] #100 openscada-Archive.DBArch-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:36:35 :: [x86_64] #100 openscada-Archive.DBArch-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:36:47 :: [i586] #100 openscada-Archive.FSArch: no need to repeat, install check SKIPPED
2018-Oct-01 15:36:48 :: [x86_64] #100 openscada-Archive.FSArch: no need to repeat, install check SKIPPED
2018-Oct-01 15:36:49 :: [aarch64] #100 libopenscada-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:37:00 :: [i586] #100 openscada-Archive.FSArch-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:37:02 :: [x86_64] #100 openscada-Archive.FSArch-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:37:14 :: [i586] #100 openscada-DAQ.AMRDevs: no need to repeat, install check SKIPPED
2018-Oct-01 15:37:15 :: [x86_64] #100 openscada-DAQ.AMRDevs: no need to repeat, install check SKIPPED
2018-Oct-01 15:37:26 :: [aarch64] #100 openscada: no need to repeat, install check SKIPPED
2018-Oct-01 15:37:28 :: [i586] #100 openscada-DAQ.AMRDevs-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:37:29 :: [x86_64] #100 openscada-DAQ.AMRDevs-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:37:41 :: [i586] #100 openscada-DAQ.BFN: no need to repeat, install check SKIPPED
2018-Oct-01 15:37:42 :: [x86_64] #100 openscada-DAQ.BFN: no need to repeat, install check SKIPPED
2018-Oct-01 15:37:55 :: [i586] #100 openscada-DAQ.BFN-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:37:55 :: [x86_64] #100 openscada-DAQ.BFN-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:38:03 :: [aarch64] #100 openscada-Archive.DBArch: no need to repeat, install check SKIPPED
2018-Oct-01 15:38:08 :: [i586] #100 openscada-DAQ.BlockCalc: no need to repeat, install check SKIPPED
2018-Oct-01 15:38:09 :: [x86_64] #100 openscada-DAQ.BlockCalc: no need to repeat, install check SKIPPED
2018-Oct-01 15:38:21 :: [x86_64] #100 openscada-DAQ.BlockCalc-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:38:22 :: [i586] #100 openscada-DAQ.BlockCalc-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:38:35 :: [x86_64] #100 openscada-DAQ.Comedi: no need to repeat, install check SKIPPED
2018-Oct-01 15:38:35 :: [i586] #100 openscada-DAQ.Comedi: no need to repeat, install check SKIPPED
2018-Oct-01 15:38:42 :: [aarch64] #100 openscada-Archive.DBArch-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:38:48 :: [x86_64] #100 openscada-DAQ.Comedi-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:38:49 :: [i586] #100 openscada-DAQ.Comedi-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:39:02 :: [x86_64] #100 openscada-DAQ.DAQGate: no need to repeat, install check SKIPPED
2018-Oct-01 15:39:03 :: [i586] #100 openscada-DAQ.DAQGate: no need to repeat, install check SKIPPED
2018-Oct-01 15:39:16 :: [i586] #100 openscada-DAQ.DAQGate-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:39:16 :: [x86_64] #100 openscada-DAQ.DAQGate-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:39:21 :: [aarch64] #100 openscada-Archive.FSArch: no need to repeat, install check SKIPPED
2018-Oct-01 15:39:29 :: [i586] #100 openscada-DAQ.DCON: no need to repeat, install check SKIPPED
2018-Oct-01 15:39:31 :: [x86_64] #100 openscada-DAQ.DCON: no need to repeat, install check SKIPPED
2018-Oct-01 15:39:43 :: [i586] #100 openscada-DAQ.DCON-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:39:45 :: [x86_64] #100 openscada-DAQ.DCON-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:39:56 :: [i586] #100 openscada-DAQ.DiamondBoards: no need to repeat, install check SKIPPED
2018-Oct-01 15:39:58 :: [aarch64] #100 openscada-Archive.FSArch-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:39:58 :: [x86_64] #100 openscada-DAQ.GPIO: no need to repeat, install check SKIPPED
2018-Oct-01 15:40:10 :: [i586] #100 openscada-DAQ.DiamondBoards-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:40:13 :: [x86_64] #100 openscada-DAQ.GPIO-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:40:23 :: [i586] #100 openscada-DAQ.GPIO: no need to repeat, install check SKIPPED
2018-Oct-01 15:40:26 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc: no need to repeat, install check SKIPPED
2018-Oct-01 15:40:36 :: [aarch64] #100 openscada-DAQ.AMRDevs: no need to repeat, install check SKIPPED
2018-Oct-01 15:40:37 :: [i586] #100 openscada-DAQ.GPIO-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:40:40 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:40:50 :: [i586] #100 openscada-DAQ.ICP_DAS: no need to repeat, install check SKIPPED
2018-Oct-01 15:40:53 :: [x86_64] #100 openscada-DAQ.LogicLev: no need to repeat, install check SKIPPED
2018-Oct-01 15:41:03 :: [i586] #100 openscada-DAQ.ICP_DAS-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:41:07 :: [x86_64] #100 openscada-DAQ.LogicLev-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:41:14 :: [aarch64] #100 openscada-DAQ.AMRDevs-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:41:17 :: [i586] #100 openscada-DAQ.JavaLikeCalc: no need to repeat, install check SKIPPED
2018-Oct-01 15:41:21 :: [x86_64] #100 openscada-DAQ.MMS: no need to repeat, install check SKIPPED
2018-Oct-01 15:41:31 :: [i586] #100 openscada-DAQ.JavaLikeCalc-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:41:34 :: [x86_64] #100 openscada-DAQ.MMS-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:41:44 :: [i586] #100 openscada-DAQ.LogicLev: no need to repeat, install check SKIPPED
2018-Oct-01 15:41:50 :: [aarch64] #100 openscada-DAQ.BFN: no need to repeat, install check SKIPPED
2018-Oct-01 15:41:50 :: [x86_64] #100 openscada-DAQ.ModBus: no need to repeat, install check SKIPPED
2018-Oct-01 15:41:58 :: [i586] #100 openscada-DAQ.LogicLev-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:42:04 :: [x86_64] #100 openscada-DAQ.ModBus-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:42:12 :: [i586] #100 openscada-DAQ.MMS: no need to repeat, install check SKIPPED
2018-Oct-01 15:42:17 :: [x86_64] #100 openscada-DAQ.OPC_UA: no need to repeat, install check SKIPPED
2018-Oct-01 15:42:26 :: [i586] #100 openscada-DAQ.MMS-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:42:27 :: [aarch64] #100 openscada-DAQ.BFN-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:42:31 :: [x86_64] #100 openscada-DAQ.OPC_UA-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:42:39 :: [i586] #100 openscada-DAQ.ModBus: no need to repeat, install check SKIPPED
2018-Oct-01 15:42:45 :: [x86_64] #100 openscada-DAQ.SNMP: no need to repeat, install check SKIPPED
2018-Oct-01 15:42:53 :: [i586] #100 openscada-DAQ.ModBus-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:42:58 :: [x86_64] #100 openscada-DAQ.SNMP-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:43:06 :: [aarch64] #100 openscada-DAQ.BlockCalc: no need to repeat, install check SKIPPED
2018-Oct-01 15:43:06 :: [i586] #100 openscada-DAQ.OPC_UA: no need to repeat, install check SKIPPED
2018-Oct-01 15:43:12 :: [x86_64] #100 openscada-DAQ.Siemens: no need to repeat, install check SKIPPED
2018-Oct-01 15:43:19 :: [i586] #100 openscada-DAQ.OPC_UA-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:43:25 :: [x86_64] #100 openscada-DAQ.Siemens-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:43:33 :: [i586] #100 openscada-DAQ.SNMP: no need to repeat, install check SKIPPED
2018-Oct-01 15:43:40 :: [x86_64] #100 openscada-DAQ.SoundCard: no need to repeat, install check SKIPPED
2018-Oct-01 15:43:43 :: [aarch64] #100 openscada-DAQ.BlockCalc-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:43:46 :: [i586] #100 openscada-DAQ.SNMP-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:43:53 :: [x86_64] #100 openscada-DAQ.SoundCard-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:44:00 :: [i586] #100 openscada-DAQ.Siemens: no need to repeat, install check SKIPPED
2018-Oct-01 15:44:07 :: [x86_64] #100 openscada-DAQ.System: no need to repeat, install check SKIPPED
2018-Oct-01 15:44:13 :: [i586] #100 openscada-DAQ.Siemens-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:44:21 :: [x86_64] #100 openscada-DAQ.System-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:44:22 :: [aarch64] #100 openscada-DAQ.Comedi: no need to repeat, install check SKIPPED
2018-Oct-01 15:44:26 :: [i586] #100 openscada-DAQ.SoundCard: no need to repeat, install check SKIPPED
2018-Oct-01 15:44:34 :: [x86_64] #100 openscada-DB.DBF: no need to repeat, install check SKIPPED
2018-Oct-01 15:44:40 :: [i586] #100 openscada-DAQ.SoundCard-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:44:48 :: [x86_64] #100 openscada-DB.DBF-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:44:53 :: [i586] #100 openscada-DAQ.System: no need to repeat, install check SKIPPED
2018-Oct-01 15:44:59 :: [aarch64] #100 openscada-DAQ.Comedi-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:45:01 :: [x86_64] #100 openscada-DB.FireBird: no need to repeat, install check SKIPPED
2018-Oct-01 15:45:06 :: [i586] #100 openscada-DAQ.System-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:45:15 :: [x86_64] #100 openscada-DB.FireBird-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:45:20 :: [i586] #100 openscada-DB.DBF: no need to repeat, install check SKIPPED
2018-Oct-01 15:45:29 :: [x86_64] #100 openscada-DB.MySQL: no need to repeat, install check SKIPPED
2018-Oct-01 15:45:33 :: [i586] #100 openscada-DB.DBF-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:45:35 :: [aarch64] #100 openscada-DAQ.DAQGate: no need to repeat, install check SKIPPED
2018-Oct-01 15:45:42 :: [x86_64] #100 openscada-DB.MySQL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:45:47 :: [i586] #100 openscada-DB.FireBird: no need to repeat, install check SKIPPED
2018-Oct-01 15:45:55 :: [x86_64] #100 openscada-DB.PostgreSQL: no need to repeat, install check SKIPPED
2018-Oct-01 15:46:00 :: [i586] #100 openscada-DB.FireBird-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:46:14 :: [i586] #100 openscada-DB.MySQL: no need to repeat, install check SKIPPED
2018-Oct-01 15:46:15 :: [x86_64] #100 openscada-DB.PostgreSQL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:46:15 :: [aarch64] #100 openscada-DAQ.DAQGate-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:46:28 :: [i586] #100 openscada-DB.MySQL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:46:29 :: [x86_64] #100 openscada-DB.SQLite: no need to repeat, install check SKIPPED
2018-Oct-01 15:46:54 :: [i586] #100 openscada-DB.PostgreSQL: no need to repeat, install check SKIPPED
2018-Oct-01 15:46:54 :: [x86_64] #100 openscada-DB.SQLite-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:46:58 :: [aarch64] #100 openscada-DAQ.DCON: no need to repeat, install check SKIPPED
2018-Oct-01 15:47:07 :: [x86_64] #100 openscada-LibDB.Main: no need to repeat, install check SKIPPED
2018-Oct-01 15:47:08 :: [i586] #100 openscada-DB.PostgreSQL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:47:21 :: [x86_64] #100 openscada-LibDB.VCA: no need to repeat, install check SKIPPED
2018-Oct-01 15:47:22 :: [i586] #100 openscada-DB.SQLite: no need to repeat, install check SKIPPED
2018-Oct-01 15:47:34 :: [x86_64] #100 openscada-Model.AGLKS: no need to repeat, install check SKIPPED
2018-Oct-01 15:47:35 :: [i586] #100 openscada-DB.SQLite-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:47:39 :: [aarch64] #100 openscada-DAQ.DCON-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:47:48 :: [x86_64] #100 openscada-Model.Boiler: no need to repeat, install check SKIPPED
2018-Oct-01 15:47:49 :: [i586] #100 openscada-LibDB.Main: no need to repeat, install check SKIPPED
2018-Oct-01 15:48:02 :: [x86_64] #100 openscada-Protocol.HTTP: no need to repeat, install check SKIPPED
2018-Oct-01 15:48:03 :: [i586] #100 openscada-LibDB.VCA: no need to repeat, install check SKIPPED
2018-Oct-01 15:48:13 :: [aarch64] #100 openscada-DAQ.GPIO: no need to repeat, install check SKIPPED
2018-Oct-01 15:48:15 :: [x86_64] #100 openscada-Protocol.HTTP-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:48:16 :: [i586] #100 openscada-Model.AGLKS: no need to repeat, install check SKIPPED
2018-Oct-01 15:48:29 :: [x86_64] #100 openscada-Protocol.SelfSystem: no need to repeat, install check SKIPPED
2018-Oct-01 15:48:29 :: [i586] #100 openscada-Model.Boiler: no need to repeat, install check SKIPPED
2018-Oct-01 15:48:42 :: [x86_64] #100 openscada-Protocol.SelfSystem-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:48:42 :: [i586] #100 openscada-Protocol.HTTP: no need to repeat, install check SKIPPED
2018-Oct-01 15:48:47 :: [aarch64] #100 openscada-DAQ.GPIO-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:48:56 :: [x86_64] #100 openscada-Protocol.UserProtocol: no need to repeat, install check SKIPPED
2018-Oct-01 15:48:56 :: [i586] #100 openscada-Protocol.HTTP-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:49:09 :: [x86_64] #100 openscada-Protocol.UserProtocol-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:49:10 :: [i586] #100 openscada-Protocol.SelfSystem: no need to repeat, install check SKIPPED
2018-Oct-01 15:49:23 :: [x86_64] #100 openscada-Special.FLibComplex1: no need to repeat, install check SKIPPED
2018-Oct-01 15:49:23 :: [i586] #100 openscada-Protocol.SelfSystem-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:49:25 :: [aarch64] #100 openscada-DAQ.JavaLikeCalc: no need to repeat, install check SKIPPED
2018-Oct-01 15:49:36 :: [x86_64] #100 openscada-Special.FLibComplex1-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:49:37 :: [i586] #100 openscada-Protocol.UserProtocol: no need to repeat, install check SKIPPED
2018-Oct-01 15:49:50 :: [x86_64] #100 openscada-Special.FLibMath: no need to repeat, install check SKIPPED
2018-Oct-01 15:49:51 :: [i586] #100 openscada-Protocol.UserProtocol-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:50:01 :: [aarch64] #100 openscada-DAQ.JavaLikeCalc-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:50:04 :: [x86_64] #100 openscada-Special.FLibMath-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:50:04 :: [i586] #100 openscada-Special.FLibComplex1: no need to repeat, install check SKIPPED
2018-Oct-01 15:50:17 :: [i586] #100 openscada-Special.FLibComplex1-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:50:18 :: [x86_64] #100 openscada-Special.FLibSYS: no need to repeat, install check SKIPPED
2018-Oct-01 15:50:31 :: [i586] #100 openscada-Special.FLibMath: no need to repeat, install check SKIPPED
2018-Oct-01 15:50:32 :: [x86_64] #100 openscada-Special.FLibSYS-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:50:41 :: [aarch64] #100 openscada-DAQ.LogicLev: no need to repeat, install check SKIPPED
2018-Oct-01 15:50:45 :: [i586] #100 openscada-Special.FLibMath-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:50:46 :: [x86_64] #100 openscada-Special.SystemTests: no need to repeat, install check SKIPPED
2018-Oct-01 15:50:59 :: [i586] #100 openscada-Special.FLibSYS: no need to repeat, install check SKIPPED
2018-Oct-01 15:51:00 :: [x86_64] #100 openscada-Special.SystemTests-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:51:14 :: [i586] #100 openscada-Special.FLibSYS-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:51:15 :: [x86_64] #100 openscada-Transport.SSL: no need to repeat, install check SKIPPED
2018-Oct-01 15:51:20 :: [aarch64] #100 openscada-DAQ.LogicLev-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:51:27 :: [i586] #100 openscada-Special.SystemTests: no need to repeat, install check SKIPPED
2018-Oct-01 15:51:28 :: [x86_64] #100 openscada-Transport.SSL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:51:40 :: [i586] #100 openscada-Special.SystemTests-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:51:41 :: [x86_64] #100 openscada-Transport.Serial: no need to repeat, install check SKIPPED
2018-Oct-01 15:51:54 :: [i586] #100 openscada-Transport.SSL: no need to repeat, install check SKIPPED
2018-Oct-01 15:51:54 :: [x86_64] #100 openscada-Transport.Serial-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:51:58 :: [aarch64] #100 openscada-DAQ.MMS: no need to repeat, install check SKIPPED
2018-Oct-01 15:52:07 :: [i586] #100 openscada-Transport.SSL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:52:07 :: [x86_64] #100 openscada-Transport.Sockets: no need to repeat, install check SKIPPED
2018-Oct-01 15:52:21 :: [x86_64] #100 openscada-Transport.Sockets-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:52:21 :: [i586] #100 openscada-Transport.Serial: no need to repeat, install check SKIPPED
2018-Oct-01 15:52:35 :: [x86_64] #100 openscada-UI.QTCfg: no need to repeat, install check SKIPPED
2018-Oct-01 15:52:35 :: [i586] #100 openscada-Transport.Serial-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:52:43 :: [aarch64] #100 openscada-DAQ.MMS-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:52:48 :: [x86_64] #100 openscada-UI.QTCfg-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:52:49 :: [i586] #100 openscada-Transport.Sockets: no need to repeat, install check SKIPPED
2018-Oct-01 15:53:02 :: [x86_64] #100 openscada-UI.QTStarter: no need to repeat, install check SKIPPED
2018-Oct-01 15:53:03 :: [i586] #100 openscada-Transport.Sockets-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:53:17 :: [x86_64] #100 openscada-UI.QTStarter-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:53:17 :: [i586] #100 openscada-UI.QTCfg: no need to repeat, install check SKIPPED
2018-Oct-01 15:53:22 :: [aarch64] #100 openscada-DAQ.ModBus: no need to repeat, install check SKIPPED
2018-Oct-01 15:53:30 :: [x86_64] #100 openscada-UI.VCAEngine: no need to repeat, install check SKIPPED
2018-Oct-01 15:53:32 :: [i586] #100 openscada-UI.QTCfg-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:53:45 :: [i586] #100 openscada-UI.QTStarter: no need to repeat, install check SKIPPED
2018-Oct-01 15:53:45 :: [x86_64] #100 openscada-UI.VCAEngine-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:53:58 :: [i586] #100 openscada-UI.QTStarter-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:53:59 :: [x86_64] #100 openscada-UI.Vision: no need to repeat, install check SKIPPED
2018-Oct-01 15:54:01 :: [aarch64] #100 openscada-DAQ.ModBus-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:54:12 :: [i586] #100 openscada-UI.VCAEngine: no need to repeat, install check SKIPPED
2018-Oct-01 15:54:13 :: [x86_64] #100 openscada-UI.Vision-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:54:26 :: [i586] #100 openscada-UI.VCAEngine-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:54:26 :: [x86_64] #100 openscada-UI.WebCfg: no need to repeat, install check SKIPPED
2018-Oct-01 15:54:39 :: [i586] #100 openscada-UI.Vision: no need to repeat, install check SKIPPED
2018-Oct-01 15:54:41 :: [x86_64] #100 openscada-UI.WebCfg-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:54:41 :: [aarch64] #100 openscada-DAQ.OPC_UA: no need to repeat, install check SKIPPED
2018-Oct-01 15:54:53 :: [i586] #100 openscada-UI.Vision-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:54:55 :: [x86_64] #100 openscada-UI.WebCfgD: no need to repeat, install check SKIPPED
2018-Oct-01 15:55:06 :: [i586] #100 openscada-UI.WebCfg: no need to repeat, install check SKIPPED
2018-Oct-01 15:55:09 :: [x86_64] #100 openscada-UI.WebCfgD-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:55:20 :: [i586] #100 openscada-UI.WebCfg-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:55:23 :: [x86_64] #100 openscada-UI.WebUser: no need to repeat, install check SKIPPED
2018-Oct-01 15:55:25 :: [aarch64] #100 openscada-DAQ.OPC_UA-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:55:34 :: [i586] #100 openscada-UI.WebCfgD: no need to repeat, install check SKIPPED
2018-Oct-01 15:55:36 :: [x86_64] #100 openscada-UI.WebUser-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:55:47 :: [i586] #100 openscada-UI.WebCfgD-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:55:50 :: [x86_64] #100 openscada-UI.WebVision: no need to repeat, install check SKIPPED
2018-Oct-01 15:56:01 :: [i586] #100 openscada-UI.WebUser: no need to repeat, install check SKIPPED
2018-Oct-01 15:56:03 :: [aarch64] #100 openscada-DAQ.SNMP: no need to repeat, install check SKIPPED
2018-Oct-01 15:56:05 :: [x86_64] #100 openscada-UI.WebVision-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:56:16 :: [i586] #100 openscada-UI.WebUser-debuginfo: no need to repeat, install check SKIPPED
	x86_64: openscada-core=0.9.0-alt2 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Oct-01 15:56:19 :: [x86_64] #100 openscada-core: no need to repeat, install check SKIPPED
2018-Oct-01 15:56:29 :: [i586] #100 openscada-UI.WebVision: no need to repeat, install check SKIPPED
2018-Oct-01 15:56:33 :: [x86_64] #100 openscada-core-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:56:43 :: [i586] #100 openscada-UI.WebVision-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:56:45 :: [aarch64] #100 openscada-DAQ.SNMP-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:56:46 :: [x86_64] #100 openscada-devel: no need to repeat, install check SKIPPED
	i586: openscada-core=0.9.0-alt2 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Oct-01 15:56:56 :: [i586] #100 openscada-core: no need to repeat, install check SKIPPED
2018-Oct-01 15:56:59 :: [x86_64] #100 openscada-docEN: no need to repeat, install check SKIPPED
2018-Oct-01 15:57:10 :: [i586] #100 openscada-core-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:57:13 :: [x86_64] #100 openscada-docRU: no need to repeat, install check SKIPPED
2018-Oct-01 15:57:23 :: [i586] #100 openscada-devel: no need to repeat, install check SKIPPED
2018-Oct-01 15:57:24 :: [aarch64] #100 openscada-DAQ.Siemens: no need to repeat, install check SKIPPED
2018-Oct-01 15:57:26 :: [x86_64] #100 openscada-docUK: no need to repeat, install check SKIPPED
2018-Oct-01 15:57:36 :: [i586] #100 openscada-docEN: no need to repeat, install check SKIPPED
2018-Oct-01 15:57:40 :: [x86_64] #100 openscada-plc: no need to repeat, install check SKIPPED
2018-Oct-01 15:57:49 :: [i586] #100 openscada-docRU: no need to repeat, install check SKIPPED
2018-Oct-01 15:57:53 :: [x86_64] #100 openscada-server: no need to repeat, install check SKIPPED
2018-Oct-01 15:58:02 :: [aarch64] #100 openscada-DAQ.Siemens-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:58:02 :: [i586] #100 openscada-docUK: no need to repeat, install check SKIPPED
2018-Oct-01 15:58:07 :: [x86_64] #100 openscada-visStation: no need to repeat, install check SKIPPED
2018-Oct-01 15:58:15 :: [i586] #100 openscada-plc: no need to repeat, install check SKIPPED
2018-Oct-01 15:58:28 :: [i586] #100 openscada-server: no need to repeat, install check SKIPPED
2018-Oct-01 15:58:39 :: [aarch64] #100 openscada-DAQ.SoundCard: no need to repeat, install check SKIPPED
2018-Oct-01 15:58:41 :: [i586] #100 openscada-visStation: no need to repeat, install check SKIPPED
2018-Oct-01 15:59:18 :: [aarch64] #100 openscada-DAQ.SoundCard-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 15:59:55 :: [aarch64] #100 openscada-DAQ.System: no need to repeat, install check SKIPPED
2018-Oct-01 16:00:34 :: [aarch64] #100 openscada-DAQ.System-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:01:09 :: [aarch64] #100 openscada-DB.DBF: no need to repeat, install check SKIPPED
2018-Oct-01 16:01:44 :: [aarch64] #100 openscada-DB.DBF-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:02:19 :: [aarch64] #100 openscada-DB.FireBird: no need to repeat, install check SKIPPED
2018-Oct-01 16:02:55 :: [aarch64] #100 openscada-DB.FireBird-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:03:34 :: [aarch64] #100 openscada-DB.MySQL: no need to repeat, install check SKIPPED
2018-Oct-01 16:04:10 :: [aarch64] #100 openscada-DB.MySQL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:04:46 :: [aarch64] #100 openscada-DB.PostgreSQL: no need to repeat, install check SKIPPED
2018-Oct-01 16:05:35 :: [aarch64] #100 openscada-DB.PostgreSQL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:06:15 :: [aarch64] #100 openscada-DB.SQLite: no need to repeat, install check SKIPPED
2018-Oct-01 16:06:53 :: [aarch64] #100 openscada-DB.SQLite-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:07:30 :: [aarch64] #100 openscada-LibDB.Main: no need to repeat, install check SKIPPED
2018-Oct-01 16:08:06 :: [aarch64] #100 openscada-LibDB.VCA: no need to repeat, install check SKIPPED
2018-Oct-01 16:08:44 :: [aarch64] #100 openscada-Model.AGLKS: no need to repeat, install check SKIPPED
2018-Oct-01 16:09:23 :: [aarch64] #100 openscada-Model.Boiler: no need to repeat, install check SKIPPED
2018-Oct-01 16:10:00 :: [aarch64] #100 openscada-Protocol.HTTP: no need to repeat, install check SKIPPED
2018-Oct-01 16:10:38 :: [aarch64] #100 openscada-Protocol.HTTP-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:11:17 :: [aarch64] #100 openscada-Protocol.SelfSystem: no need to repeat, install check SKIPPED
2018-Oct-01 16:11:54 :: [aarch64] #100 openscada-Protocol.SelfSystem-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:12:31 :: [aarch64] #100 openscada-Protocol.UserProtocol: no need to repeat, install check SKIPPED
2018-Oct-01 16:13:07 :: [aarch64] #100 openscada-Protocol.UserProtocol-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:13:44 :: [aarch64] #100 openscada-Special.FLibComplex1: no need to repeat, install check SKIPPED
2018-Oct-01 16:14:19 :: [aarch64] #100 openscada-Special.FLibComplex1-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:15:08 :: [aarch64] #100 openscada-Special.FLibMath: no need to repeat, install check SKIPPED
2018-Oct-01 16:15:43 :: [aarch64] #100 openscada-Special.FLibMath-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:16:19 :: [aarch64] #100 openscada-Special.FLibSYS: no need to repeat, install check SKIPPED
2018-Oct-01 16:16:58 :: [aarch64] #100 openscada-Special.FLibSYS-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:17:34 :: [aarch64] #100 openscada-Special.SystemTests: no need to repeat, install check SKIPPED
2018-Oct-01 16:18:11 :: [aarch64] #100 openscada-Special.SystemTests-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:18:48 :: [aarch64] #100 openscada-Transport.SSL: no need to repeat, install check SKIPPED
2018-Oct-01 16:19:27 :: [aarch64] #100 openscada-Transport.SSL-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:20:10 :: [aarch64] #100 openscada-Transport.Serial: no need to repeat, install check SKIPPED
2018-Oct-01 16:20:48 :: [aarch64] #100 openscada-Transport.Serial-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:21:26 :: [aarch64] #100 openscada-Transport.Sockets: no need to repeat, install check SKIPPED
2018-Oct-01 16:22:04 :: [aarch64] #100 openscada-Transport.Sockets-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:22:37 :: [aarch64] #100 openscada-UI.QTCfg: no need to repeat, install check SKIPPED
2018-Oct-01 16:23:14 :: [aarch64] #100 openscada-UI.QTCfg-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:23:48 :: [aarch64] #100 openscada-UI.QTStarter: no need to repeat, install check SKIPPED
2018-Oct-01 16:24:23 :: [aarch64] #100 openscada-UI.QTStarter-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:24:59 :: [aarch64] #100 openscada-UI.VCAEngine: no need to repeat, install check SKIPPED
2018-Oct-01 16:25:36 :: [aarch64] #100 openscada-UI.VCAEngine-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:26:12 :: [aarch64] #100 openscada-UI.Vision: no need to repeat, install check SKIPPED
2018-Oct-01 16:26:52 :: [aarch64] #100 openscada-UI.Vision-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:27:32 :: [aarch64] #100 openscada-UI.WebCfg: no need to repeat, install check SKIPPED
2018-Oct-01 16:28:10 :: [aarch64] #100 openscada-UI.WebCfg-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:28:48 :: [aarch64] #100 openscada-UI.WebCfgD: no need to repeat, install check SKIPPED
2018-Oct-01 16:29:26 :: [aarch64] #100 openscada-UI.WebCfgD-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:30:03 :: [aarch64] #100 openscada-UI.WebUser: no need to repeat, install check SKIPPED
2018-Oct-01 16:30:39 :: [aarch64] #100 openscada-UI.WebUser-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:31:20 :: [aarch64] #100 openscada-UI.WebVision: no need to repeat, install check SKIPPED
2018-Oct-01 16:32:00 :: [aarch64] #100 openscada-UI.WebVision-debuginfo: no need to repeat, install check SKIPPED
	aarch64: openscada-core=0.9.0-alt2 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Oct-01 16:32:38 :: [aarch64] #100 openscada-core: no need to repeat, install check SKIPPED
2018-Oct-01 16:33:18 :: [aarch64] #100 openscada-core-debuginfo: no need to repeat, install check SKIPPED
2018-Oct-01 16:34:04 :: [aarch64] #100 openscada-devel: no need to repeat, install check SKIPPED
2018-Oct-01 16:34:41 :: [aarch64] #100 openscada-docEN: no need to repeat, install check SKIPPED
2018-Oct-01 16:35:22 :: [aarch64] #100 openscada-docRU: no need to repeat, install check SKIPPED
2018-Oct-01 16:36:00 :: [aarch64] #100 openscada-docUK: no need to repeat, install check SKIPPED
2018-Oct-01 16:36:39 :: [aarch64] #100 openscada-plc: no need to repeat, install check SKIPPED
2018-Oct-01 16:37:16 :: [aarch64] #100 openscada-server: no need to repeat, install check SKIPPED
2018-Oct-01 16:37:54 :: [aarch64] #100 openscada-visStation: no need to repeat, install check SKIPPED
2018-Oct-01 16:38:09 :: [x86_64-i586] plan: #45 +45 -45 =11365
2018-Oct-01 16:38:47 :: [i586] remote arepo: failed to build i586-openscada-DAQ.DiamondBoards-0.9.0-alt2.i586.rpm
2018-Oct-01 16:38:47 :: [x86_64-i586] remote build FAILED
2018-Oct-01 16:38:47 :: [x86_64-i586] build FAILED
2018-Oct-01 16:38:47 :: task #213841 for sisyphus FAILED


More information about the Sisyphus-incominger mailing list