[#216142] FAILED freecad.git=0.17-alt7

[Girar Builder awaiter robot]

http://git.altlinux.org/tasks/216142/logs/events.1.1.log

2018-Nov-06 11:35:58 :: task #216142 for sisyphus started by cas:
#100 build 0.17-alt7 from /people/cas/packages/freecad.git fetched at 2018-Nov-06 11:35:55
2018-Nov-06 11:36:01 :: [i586] #100 freecad.git 0.17-alt7: build start
2018-Nov-06 11:36:01 :: [x86_64] #100 freecad.git 0.17-alt7: build start
2018-Nov-06 11:36:01 :: [aarch64] #100 freecad.git 0.17-alt7: build start
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/DocumentPy.cpp
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/PythonWorkbenchPy.cpp
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/ViewProviderPy.cpp
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/ViewProviderDocumentObjectPy.cpp
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/WorkbenchPy.cpp
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/SelectionObjectPy.cpp
Now run 'make' to build FreeCAD
-- Configuring incomplete, errors occurred!
See also "/usr/src/RPM/BUILD/freecad-0.17/CMakeFiles/CMakeOutput.log".
See also "/usr/src/RPM/BUILD/freecad-0.17/CMakeFiles/CMakeError.log".
2018-Nov-06 11:40:52 :: [x86_64] freecad.git 0.17-alt7: remote: build failed
2018-Nov-06 11:40:52 :: [x86_64] #100 freecad.git 0.17-alt7: build FAILED
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/DocumentPy.cpp
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/PythonWorkbenchPy.cpp
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/ViewProviderPy.cpp
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/ViewProviderDocumentObjectPy.cpp
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/WorkbenchPy.cpp
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/SelectionObjectPy.cpp
Now run 'make' to build FreeCAD
-- Configuring incomplete, errors occurred!
See also "/usr/src/RPM/BUILD/freecad-0.17/CMakeFiles/CMakeOutput.log".
See also "/usr/src/RPM/BUILD/freecad-0.17/CMakeFiles/CMakeError.log".
2018-Nov-06 11:41:01 :: [i586] freecad.git 0.17-alt7: remote: build failed
2018-Nov-06 11:41:01 :: [i586] #100 freecad.git 0.17-alt7: build FAILED
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/DocumentPy.cpp
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/PythonWorkbenchPy.cpp
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/ViewProviderPy.cpp
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/ViewProviderDocumentObjectPy.cpp
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/WorkbenchPy.cpp
-- /usr/src/RPM/BUILD/freecad-0.17/src/Gui/SelectionObjectPy.cpp
Now run 'make' to build FreeCAD
-- Configuring incomplete, errors occurred!
See also "/usr/src/RPM/BUILD/freecad-0.17/CMakeFiles/CMakeOutput.log".
See also "/usr/src/RPM/BUILD/freecad-0.17/CMakeFiles/CMakeError.log".
2018-Nov-06 11:46:18 :: [aarch64] freecad.git 0.17-alt7: remote: build failed
2018-Nov-06 11:46:18 :: [aarch64] #100 freecad.git 0.17-alt7: build FAILED
2018-Nov-06 11:40:52 :: [x86_64] build FAILED
2018-Nov-06 11:41:01 :: [i586] build FAILED
2018-Nov-06 11:46:19 :: [aarch64] build FAILED
2018-Nov-06 11:46:19 :: task #216142 for sisyphus FAILED