[#208630] TESTED (try 4) openscada.git=0.9.0-alt1
Girar Builder awaiter robot
girar-builder at altlinux.org
Fri Jun 22 13:00:57 MSK 2018
http://git.altlinux.org/tasks/208630/logs/events.4.1.log
2018-Jun-22 06:17:13 :: test-only task #208630 for sisyphus resumed by antohami:
#100 removed
#200 removed
#300 build 0.9.0-alt1 from /people/antohami/packages/openscada.git fetched at 2018-Jun-22 06:16:50
2018-Jun-22 06:17:14 :: [aarch64] #300 openscada.git 0.9.0-alt1: build start
2018-Jun-22 06:17:14 :: [i586] #300 openscada.git 0.9.0-alt1: build start
2018-Jun-22 06:17:14 :: [x86_64] #300 openscada.git 0.9.0-alt1: build start
2018-Jun-22 06:36:13 :: [x86_64] #300 openscada.git 0.9.0-alt1: build OK
2018-Jun-22 06:39:06 :: [i586] #300 openscada.git 0.9.0-alt1: build OK
2018-Jun-22 07:05:04 :: [aarch64] #300 openscada.git 0.9.0-alt1: build OK
2018-Jun-22 07:07:25 :: build check OK
2018-Jun-22 07:08:51 :: noarch check OK
2018-Jun-22 07:08:54 :: plan: src +1 -1 =18577, aarch64 +84 -80 =28510, i586 +88 -84 =34160, noarch +10 -8 =18967, x86_64 +84 -80 =34198
2018-Jun-22 07:08:54 :: version check OK
2018-Jun-22 07:10:24 :: generated apt indices
2018-Jun-22 07:10:24 :: created next repo
2018-Jun-22 07:10:45 :: dependencies check OK
2018-Jun-22 07:11:40 :: ELF symbols check OK
2018-Jun-22 07:12:36 :: [x86_64] #300 openscada: install check OK
2018-Jun-22 07:12:40 :: [i586] #300 openscada: install check OK
2018-Jun-22 07:13:14 :: [x86_64] #300 openscada-Archive.DBArch: install check OK
2018-Jun-22 07:13:22 :: [i586] #300 openscada-Archive.DBArch: install check OK
2018-Jun-22 07:13:39 :: [aarch64] #300 openscada: install check OK
2018-Jun-22 07:13:56 :: [x86_64] #300 openscada-Archive.DBArch-debuginfo: install check OK
2018-Jun-22 07:14:06 :: [i586] #300 openscada-Archive.DBArch-debuginfo: install check OK
2018-Jun-22 07:14:34 :: [x86_64] #300 openscada-Archive.FSArch: install check OK
2018-Jun-22 07:14:48 :: [i586] #300 openscada-Archive.FSArch: install check OK
2018-Jun-22 07:15:16 :: [x86_64] #300 openscada-Archive.FSArch-debuginfo: install check OK
2018-Jun-22 07:15:17 :: [aarch64] #300 openscada-Archive.DBArch: install check OK
2018-Jun-22 07:15:33 :: [i586] #300 openscada-Archive.FSArch-debuginfo: install check OK
2018-Jun-22 07:15:55 :: [x86_64] #300 openscada-DAQ.AMRDevs: install check OK
2018-Jun-22 07:16:15 :: [i586] #300 openscada-DAQ.AMRDevs: install check OK
2018-Jun-22 07:16:36 :: [x86_64] #300 openscada-DAQ.AMRDevs-debuginfo: install check OK
2018-Jun-22 07:16:59 :: [i586] #300 openscada-DAQ.AMRDevs-debuginfo: install check OK
2018-Jun-22 07:17:04 :: [aarch64] #300 openscada-Archive.DBArch-debuginfo: install check OK
2018-Jun-22 07:17:14 :: [x86_64] #300 openscada-DAQ.BFN: install check OK
2018-Jun-22 07:17:41 :: [i586] #300 openscada-DAQ.BFN: install check OK
2018-Jun-22 07:17:54 :: [x86_64] #300 openscada-DAQ.BFN-debuginfo: install check OK
2018-Jun-22 07:18:25 :: [i586] #300 openscada-DAQ.BFN-debuginfo: install check OK
2018-Jun-22 07:18:32 :: [x86_64] #300 openscada-DAQ.BlockCalc: install check OK
2018-Jun-22 07:18:42 :: [aarch64] #300 openscada-Archive.FSArch: install check OK
2018-Jun-22 07:19:07 :: [i586] #300 openscada-DAQ.BlockCalc: install check OK
2018-Jun-22 07:19:13 :: [x86_64] #300 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Jun-22 07:19:57 :: [x86_64] #300 openscada-DAQ.Comedi: install check OK
2018-Jun-22 07:20:00 :: [i586] #300 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Jun-22 07:20:31 :: [aarch64] #300 openscada-Archive.FSArch-debuginfo: install check OK
2018-Jun-22 07:20:38 :: [x86_64] #300 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Jun-22 07:20:43 :: [i586] #300 openscada-DAQ.Comedi: install check OK
2018-Jun-22 07:21:16 :: [x86_64] #300 openscada-DAQ.DAQGate: install check OK
2018-Jun-22 07:21:27 :: [i586] #300 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Jun-22 07:21:57 :: [x86_64] #300 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Jun-22 07:22:08 :: [i586] #300 openscada-DAQ.DAQGate: install check OK
2018-Jun-22 07:22:09 :: [aarch64] #300 openscada-DAQ.AMRDevs: install check OK
2018-Jun-22 07:22:35 :: [x86_64] #300 openscada-DAQ.DCON: install check OK
2018-Jun-22 07:22:53 :: [i586] #300 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Jun-22 07:23:16 :: [x86_64] #300 openscada-DAQ.DCON-debuginfo: install check OK
2018-Jun-22 07:23:35 :: [i586] #300 openscada-DAQ.DCON: install check OK
2018-Jun-22 07:23:49 :: [aarch64] #300 openscada-DAQ.AMRDevs-debuginfo: install check OK
2018-Jun-22 07:23:55 :: [x86_64] #300 openscada-DAQ.JavaLikeCalc: install check OK
2018-Jun-22 07:24:19 :: [i586] #300 openscada-DAQ.DCON-debuginfo: install check OK
2018-Jun-22 07:24:37 :: [x86_64] #300 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Jun-22 07:25:01 :: [i586] #300 openscada-DAQ.DiamondBoards: install check OK
2018-Jun-22 07:25:15 :: [x86_64] #300 openscada-DAQ.LogicLev: install check OK
2018-Jun-22 07:25:27 :: [aarch64] #300 openscada-DAQ.BFN: install check OK
2018-Jun-22 07:25:45 :: [i586] #300 openscada-DAQ.DiamondBoards-debuginfo: install check OK
2018-Jun-22 07:26:02 :: [x86_64] #300 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Jun-22 07:26:36 :: [i586] #300 openscada-DAQ.ICP_DAS: install check OK
2018-Jun-22 07:26:59 :: [x86_64] #300 openscada-DAQ.MMS: install check OK
2018-Jun-22 07:27:09 :: [aarch64] #300 openscada-DAQ.BFN-debuginfo: install check OK
2018-Jun-22 07:27:21 :: [i586] #300 openscada-DAQ.ICP_DAS-debuginfo: install check OK
2018-Jun-22 07:27:40 :: [x86_64] #300 openscada-DAQ.MMS-debuginfo: install check OK
2018-Jun-22 07:28:03 :: [i586] #300 openscada-DAQ.JavaLikeCalc: install check OK
2018-Jun-22 07:28:19 :: [x86_64] #300 openscada-DAQ.ModBus: install check OK
2018-Jun-22 07:28:47 :: [i586] #300 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Jun-22 07:28:49 :: [aarch64] #300 openscada-DAQ.BlockCalc: install check OK
2018-Jun-22 07:28:59 :: [x86_64] #300 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Jun-22 07:29:31 :: [i586] #300 openscada-DAQ.LogicLev: install check OK
2018-Jun-22 07:29:38 :: [x86_64] #300 openscada-DAQ.OPC_UA: install check OK
2018-Jun-22 07:30:16 :: [i586] #300 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Jun-22 07:30:19 :: [x86_64] #300 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Jun-22 07:30:27 :: [aarch64] #300 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Jun-22 07:30:58 :: [i586] #300 openscada-DAQ.MMS: install check OK
2018-Jun-22 07:30:58 :: [x86_64] #300 openscada-DAQ.SNMP: install check OK
2018-Jun-22 07:31:41 :: [x86_64] #300 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Jun-22 07:31:42 :: [i586] #300 openscada-DAQ.MMS-debuginfo: install check OK
2018-Jun-22 07:32:04 :: [aarch64] #300 openscada-DAQ.Comedi: install check OK
2018-Jun-22 07:32:20 :: [x86_64] #300 openscada-DAQ.Siemens: install check OK
2018-Jun-22 07:32:25 :: [i586] #300 openscada-DAQ.ModBus: install check OK
2018-Jun-22 07:33:05 :: [x86_64] #300 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Jun-22 07:33:13 :: [i586] #300 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Jun-22 07:33:43 :: [x86_64] #300 openscada-DAQ.SoundCard: install check OK
2018-Jun-22 07:33:46 :: [aarch64] #300 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Jun-22 07:33:55 :: [i586] #300 openscada-DAQ.OPC_UA: install check OK
2018-Jun-22 07:34:24 :: [x86_64] #300 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Jun-22 07:34:39 :: [i586] #300 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Jun-22 07:35:03 :: [x86_64] #300 openscada-DAQ.System: install check OK
2018-Jun-22 07:35:21 :: [i586] #300 openscada-DAQ.SNMP: install check OK
2018-Jun-22 07:35:25 :: [aarch64] #300 openscada-DAQ.DAQGate: install check OK
2018-Jun-22 07:35:44 :: [x86_64] #300 openscada-DAQ.System-debuginfo: install check OK
2018-Jun-22 07:36:10 :: [i586] #300 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Jun-22 07:36:23 :: [x86_64] #300 openscada-DB.DBF: install check OK
2018-Jun-22 07:36:52 :: [i586] #300 openscada-DAQ.Siemens: install check OK
2018-Jun-22 07:37:03 :: [x86_64] #300 openscada-DB.DBF-debuginfo: install check OK
2018-Jun-22 07:37:04 :: [aarch64] #300 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Jun-22 07:37:36 :: [i586] #300 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Jun-22 07:37:42 :: [x86_64] #300 openscada-DB.FireBird: install check OK
2018-Jun-22 07:38:18 :: [i586] #300 openscada-DAQ.SoundCard: install check OK
2018-Jun-22 07:38:29 :: [x86_64] #300 openscada-DB.FireBird-debuginfo: install check OK
2018-Jun-22 07:38:47 :: [aarch64] #300 openscada-DAQ.DCON: install check OK
2018-Jun-22 07:39:05 :: [i586] #300 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Jun-22 07:39:13 :: [x86_64] #300 openscada-DB.MySQL: install check OK
2018-Jun-22 07:39:48 :: [i586] #300 openscada-DAQ.System: install check OK
2018-Jun-22 07:39:55 :: [x86_64] #300 openscada-DB.MySQL-debuginfo: install check OK
2018-Jun-22 07:40:32 :: [i586] #300 openscada-DAQ.System-debuginfo: install check OK
2018-Jun-22 07:40:33 :: [aarch64] #300 openscada-DAQ.DCON-debuginfo: install check OK
2018-Jun-22 07:40:34 :: [x86_64] #300 openscada-DB.PostgreSQL: install check OK
2018-Jun-22 07:41:14 :: [i586] #300 openscada-DB.DBF: install check OK
2018-Jun-22 07:41:16 :: [x86_64] #300 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Jun-22 07:41:54 :: [x86_64] #300 openscada-DB.SQLite: install check OK
2018-Jun-22 07:41:58 :: [i586] #300 openscada-DB.DBF-debuginfo: install check OK
2018-Jun-22 07:42:09 :: [aarch64] #300 openscada-DAQ.JavaLikeCalc: install check OK
2018-Jun-22 07:42:35 :: [x86_64] #300 openscada-DB.SQLite-debuginfo: install check OK
2018-Jun-22 07:42:40 :: [i586] #300 openscada-DB.FireBird: install check OK
2018-Jun-22 07:43:13 :: [x86_64] #300 openscada-LibDB.Main: install check OK
2018-Jun-22 07:43:24 :: [i586] #300 openscada-DB.FireBird-debuginfo: install check OK
2018-Jun-22 07:43:48 :: [aarch64] #300 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Jun-22 07:43:52 :: [x86_64] #300 openscada-LibDB.VCA: install check OK
2018-Jun-22 07:44:08 :: [i586] #300 openscada-DB.MySQL: install check OK
2018-Jun-22 07:44:34 :: [x86_64] #300 openscada-Model.AGLKS: install check OK
2018-Jun-22 07:44:54 :: [i586] #300 openscada-DB.MySQL-debuginfo: install check OK
2018-Jun-22 07:45:15 :: [x86_64] #300 openscada-Model.Boiler: install check OK
2018-Jun-22 07:45:27 :: [aarch64] #300 openscada-DAQ.LogicLev: install check OK
2018-Jun-22 07:45:36 :: [i586] #300 openscada-DB.PostgreSQL: install check OK
2018-Jun-22 07:45:53 :: [x86_64] #300 openscada-Protocol.HTTP: install check OK
2018-Jun-22 07:46:22 :: [i586] #300 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Jun-22 07:46:33 :: [x86_64] #300 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Jun-22 07:47:04 :: [i586] #300 openscada-DB.SQLite: install check OK
2018-Jun-22 07:47:05 :: [aarch64] #300 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Jun-22 07:47:12 :: [x86_64] #300 openscada-Protocol.SelfSystem: install check OK
2018-Jun-22 07:47:49 :: [i586] #300 openscada-DB.SQLite-debuginfo: install check OK
2018-Jun-22 07:47:52 :: [x86_64] #300 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Jun-22 07:48:34 :: [x86_64] #300 openscada-Protocol.UserProtocol: install check OK
2018-Jun-22 07:48:34 :: [i586] #300 openscada-LibDB.Main: install check OK
2018-Jun-22 07:48:42 :: [aarch64] #300 openscada-DAQ.MMS: install check OK
2018-Jun-22 07:49:22 :: [x86_64] #300 openscada-Protocol.UserProtocol-debuginfo: install check OK
2018-Jun-22 07:49:22 :: [i586] #300 openscada-LibDB.VCA: install check OK
2018-Jun-22 07:50:02 :: [x86_64] #300 openscada-Special.FLibComplex1: install check OK
2018-Jun-22 07:50:14 :: [i586] #300 openscada-Model.AGLKS: install check OK
2018-Jun-22 07:50:43 :: [x86_64] #300 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Jun-22 07:50:45 :: [aarch64] #300 openscada-DAQ.MMS-debuginfo: install check OK
2018-Jun-22 07:50:58 :: [i586] #300 openscada-Model.Boiler: install check OK
2018-Jun-22 07:51:22 :: [x86_64] #300 openscada-Special.FLibMath: install check OK
2018-Jun-22 07:51:40 :: [i586] #300 openscada-Protocol.HTTP: install check OK
2018-Jun-22 07:52:02 :: [x86_64] #300 openscada-Special.FLibMath-debuginfo: install check OK
2018-Jun-22 07:52:23 :: [aarch64] #300 openscada-DAQ.ModBus: install check OK
2018-Jun-22 07:52:24 :: [i586] #300 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Jun-22 07:52:42 :: [x86_64] #300 openscada-Special.FLibSYS: install check OK
2018-Jun-22 07:53:06 :: [i586] #300 openscada-Protocol.SelfSystem: install check OK
2018-Jun-22 07:53:23 :: [x86_64] #300 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Jun-22 07:53:50 :: [i586] #300 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Jun-22 07:54:01 :: [x86_64] #300 openscada-Special.SystemTests: install check OK
2018-Jun-22 07:54:09 :: [aarch64] #300 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Jun-22 07:54:32 :: [i586] #300 openscada-Protocol.UserProtocol: install check OK
2018-Jun-22 07:54:42 :: [x86_64] #300 openscada-Special.SystemTests-debuginfo: install check OK
2018-Jun-22 07:55:20 :: [i586] #300 openscada-Protocol.UserProtocol-debuginfo: install check OK
2018-Jun-22 07:55:25 :: [x86_64] #300 openscada-Transport.SSL: install check OK
2018-Jun-22 07:55:48 :: [aarch64] #300 openscada-DAQ.OPC_UA: install check OK
2018-Jun-22 07:56:04 :: [i586] #300 openscada-Special.FLibComplex1: install check OK
2018-Jun-22 07:56:09 :: [x86_64] #300 openscada-Transport.SSL-debuginfo: install check OK
2018-Jun-22 07:56:49 :: [x86_64] #300 openscada-Transport.Serial: install check OK
2018-Jun-22 07:56:50 :: [i586] #300 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Jun-22 07:57:30 :: [x86_64] #300 openscada-Transport.Serial-debuginfo: install check OK
2018-Jun-22 07:57:33 :: [i586] #300 openscada-Special.FLibMath: install check OK
2018-Jun-22 07:57:33 :: [aarch64] #300 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Jun-22 07:58:11 :: [x86_64] #300 openscada-Transport.Sockets: install check OK
2018-Jun-22 07:58:19 :: [i586] #300 openscada-Special.FLibMath-debuginfo: install check OK
2018-Jun-22 07:58:51 :: [x86_64] #300 openscada-Transport.Sockets-debuginfo: install check OK
2018-Jun-22 07:59:02 :: [i586] #300 openscada-Special.FLibSYS: install check OK
2018-Jun-22 07:59:18 :: [aarch64] #300 openscada-DAQ.SNMP: install check OK
2018-Jun-22 07:59:32 :: [x86_64] #300 openscada-UI.QTCfg: install check OK
2018-Jun-22 07:59:48 :: [i586] #300 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Jun-22 08:00:30 :: [i586] #300 openscada-Special.SystemTests: install check OK
2018-Jun-22 08:00:40 :: [x86_64] #300 openscada-UI.QTCfg-debuginfo: install check OK
2018-Jun-22 08:01:08 :: [aarch64] #300 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Jun-22 08:01:14 :: [i586] #300 openscada-Special.SystemTests-debuginfo: install check OK
2018-Jun-22 08:01:20 :: [x86_64] #300 openscada-UI.QTStarter: install check OK
2018-Jun-22 08:01:56 :: [i586] #300 openscada-Transport.SSL: install check OK
2018-Jun-22 08:02:34 :: [x86_64] #300 openscada-UI.QTStarter-debuginfo: install check OK
2018-Jun-22 08:02:41 :: [i586] #300 openscada-Transport.SSL-debuginfo: install check OK
2018-Jun-22 08:02:50 :: [aarch64] #300 openscada-DAQ.Siemens: install check OK
2018-Jun-22 08:03:13 :: [x86_64] #300 openscada-UI.VCAEngine: install check OK
2018-Jun-22 08:03:23 :: [i586] #300 openscada-Transport.Serial: install check OK
2018-Jun-22 08:04:03 :: [x86_64] #300 openscada-UI.VCAEngine-debuginfo: install check OK
2018-Jun-22 08:04:10 :: [i586] #300 openscada-Transport.Serial-debuginfo: install check OK
2018-Jun-22 08:04:37 :: [aarch64] #300 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Jun-22 08:04:47 :: [x86_64] #300 openscada-UI.Vision: install check OK
2018-Jun-22 08:04:55 :: [i586] #300 openscada-Transport.Sockets: install check OK
2018-Jun-22 08:05:43 :: [i586] #300 openscada-Transport.Sockets-debuginfo: install check OK
2018-Jun-22 08:05:57 :: [x86_64] #300 openscada-UI.Vision-debuginfo: install check OK
2018-Jun-22 08:06:12 :: [aarch64] #300 openscada-DAQ.SoundCard: install check OK
2018-Jun-22 08:06:30 :: [i586] #300 openscada-UI.QTCfg: install check OK
2018-Jun-22 08:06:40 :: [x86_64] #300 openscada-UI.WebCfg: install check OK
2018-Jun-22 08:07:21 :: [x86_64] #300 openscada-UI.WebCfg-debuginfo: install check OK
2018-Jun-22 08:07:47 :: [i586] #300 openscada-UI.QTCfg-debuginfo: install check OK
2018-Jun-22 08:07:55 :: [aarch64] #300 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Jun-22 08:08:00 :: [x86_64] #300 openscada-UI.WebCfgD: install check OK
2018-Jun-22 08:08:31 :: [i586] #300 openscada-UI.QTStarter: install check OK
2018-Jun-22 08:08:41 :: [x86_64] #300 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Jun-22 08:09:20 :: [x86_64] #300 openscada-UI.WebUser: install check OK
2018-Jun-22 08:09:26 :: [aarch64] #300 openscada-DAQ.System: install check OK
2018-Jun-22 08:09:53 :: [i586] #300 openscada-UI.QTStarter-debuginfo: install check OK
2018-Jun-22 08:10:01 :: [x86_64] #300 openscada-UI.WebUser-debuginfo: install check OK
2018-Jun-22 08:10:36 :: [i586] #300 openscada-UI.VCAEngine: install check OK
2018-Jun-22 08:10:40 :: [x86_64] #300 openscada-UI.WebVision: install check OK
2018-Jun-22 08:11:04 :: [aarch64] #300 openscada-DAQ.System-debuginfo: install check OK
2018-Jun-22 08:11:21 :: [i586] #300 openscada-UI.VCAEngine-debuginfo: install check OK
2018-Jun-22 08:11:24 :: [x86_64] #300 openscada-UI.WebVision-debuginfo: install check OK
x86_64: openscada-core=0.9.0-alt1 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Jun-22 08:12:02 :: [x86_64] #300 openscada-core: install check OK
2018-Jun-22 08:12:05 :: [i586] #300 openscada-UI.Vision: install check OK
2018-Jun-22 08:12:41 :: [aarch64] #300 openscada-DB.DBF: install check OK
2018-Jun-22 08:12:43 :: [x86_64] #300 openscada-core-debuginfo: install check OK
2018-Jun-22 08:13:17 :: [i586] #300 openscada-UI.Vision-debuginfo: install check OK
2018-Jun-22 08:13:22 :: [x86_64] #300 openscada-devel: install check OK
x86_64: openscada-docEN=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-22 08:13:40 :: [x86_64] #300 openscada-docEN: install check OK
x86_64: openscada-docRU=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-22 08:13:58 :: [x86_64] #300 openscada-docRU: install check OK
2018-Jun-22 08:14:00 :: [i586] #300 openscada-UI.WebCfg: install check OK
x86_64: openscada-docUK=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-22 08:14:17 :: [x86_64] #300 openscada-docUK: install check OK
2018-Jun-22 08:14:21 :: [aarch64] #300 openscada-DB.DBF-debuginfo: install check OK
2018-Jun-22 08:14:47 :: [i586] #300 openscada-UI.WebCfg-debuginfo: install check OK
2018-Jun-22 08:14:58 :: [x86_64] #300 openscada-plc: install check OK
2018-Jun-22 08:15:30 :: [i586] #300 openscada-UI.WebCfgD: install check OK
2018-Jun-22 08:15:37 :: [x86_64] #300 openscada-server: install check OK
2018-Jun-22 08:16:02 :: [aarch64] #300 openscada-DB.FireBird: install check OK
2018-Jun-22 08:16:14 :: [i586] #300 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Jun-22 08:16:18 :: [x86_64] #300 openscada-visStation: install check OK
2018-Jun-22 08:16:56 :: [i586] #300 openscada-UI.WebUser: install check OK
2018-Jun-22 08:17:41 :: [i586] #300 openscada-UI.WebUser-debuginfo: install check OK
2018-Jun-22 08:17:44 :: [aarch64] #300 openscada-DB.FireBird-debuginfo: install check OK
2018-Jun-22 08:18:24 :: [i586] #300 openscada-UI.WebVision: install check OK
2018-Jun-22 08:19:12 :: [i586] #300 openscada-UI.WebVision-debuginfo: install check OK
2018-Jun-22 08:19:21 :: [aarch64] #300 openscada-DB.MySQL: install check OK
i586: openscada-core=0.9.0-alt1 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Jun-22 08:19:55 :: [i586] #300 openscada-core: install check OK
2018-Jun-22 08:20:43 :: [i586] #300 openscada-core-debuginfo: install check OK
2018-Jun-22 08:21:06 :: [aarch64] #300 openscada-DB.MySQL-debuginfo: install check OK
2018-Jun-22 08:21:28 :: [i586] #300 openscada-devel: install check OK
i586: openscada-docEN=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-22 08:21:50 :: [i586] #300 openscada-docEN: install check OK
i586: openscada-docRU=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-22 08:22:12 :: [i586] #300 openscada-docRU: install check OK
i586: openscada-docUK=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-22 08:22:34 :: [i586] #300 openscada-docUK: install check OK
2018-Jun-22 08:22:46 :: [aarch64] #300 openscada-DB.PostgreSQL: install check OK
2018-Jun-22 08:23:25 :: [i586] #300 openscada-plc: install check OK
2018-Jun-22 08:24:17 :: [i586] #300 openscada-server: install check OK
2018-Jun-22 08:24:26 :: [aarch64] #300 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Jun-22 08:25:10 :: [i586] #300 openscada-visStation: install check OK
2018-Jun-22 08:26:03 :: [aarch64] #300 openscada-DB.SQLite: install check OK
2018-Jun-22 08:27:41 :: [aarch64] #300 openscada-DB.SQLite-debuginfo: install check OK
2018-Jun-22 08:29:13 :: [aarch64] #300 openscada-LibDB.Main: install check OK
2018-Jun-22 08:30:47 :: [aarch64] #300 openscada-LibDB.VCA: install check OK
2018-Jun-22 08:32:24 :: [aarch64] #300 openscada-Model.AGLKS: install check OK
2018-Jun-22 08:34:00 :: [aarch64] #300 openscada-Model.Boiler: install check OK
2018-Jun-22 08:35:33 :: [aarch64] #300 openscada-Protocol.HTTP: install check OK
2018-Jun-22 08:37:11 :: [aarch64] #300 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Jun-22 08:38:48 :: [aarch64] #300 openscada-Protocol.SelfSystem: install check OK
2018-Jun-22 08:40:27 :: [aarch64] #300 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Jun-22 08:42:29 :: [aarch64] #300 openscada-Protocol.UserProtocol: install check OK
2018-Jun-22 08:44:06 :: [aarch64] #300 openscada-Protocol.UserProtocol-debuginfo: install check OK
2018-Jun-22 08:45:42 :: [aarch64] #300 openscada-Special.FLibComplex1: install check OK
2018-Jun-22 08:47:23 :: [aarch64] #300 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Jun-22 08:49:00 :: [aarch64] #300 openscada-Special.FLibMath: install check OK
2018-Jun-22 08:50:58 :: [aarch64] #300 openscada-Special.FLibMath-debuginfo: install check OK
2018-Jun-22 08:52:46 :: [aarch64] #300 openscada-Special.FLibSYS: install check OK
2018-Jun-22 08:55:27 :: [aarch64] #300 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Jun-22 08:58:59 :: [aarch64] #300 openscada-Special.SystemTests: install check OK
2018-Jun-22 09:02:28 :: [aarch64] #300 openscada-Special.SystemTests-debuginfo: install check OK
2018-Jun-22 09:04:05 :: [aarch64] #300 openscada-Transport.SSL: install check OK
2018-Jun-22 09:05:53 :: [aarch64] #300 openscada-Transport.SSL-debuginfo: install check OK
2018-Jun-22 09:07:45 :: [aarch64] #300 openscada-Transport.Serial: install check OK
2018-Jun-22 09:09:38 :: [aarch64] #300 openscada-Transport.Serial-debuginfo: install check OK
2018-Jun-22 09:11:22 :: [aarch64] #300 openscada-Transport.Sockets: install check OK
2018-Jun-22 09:13:17 :: [aarch64] #300 openscada-Transport.Sockets-debuginfo: install check OK
2018-Jun-22 09:15:06 :: [aarch64] #300 openscada-UI.QTCfg: install check OK
2018-Jun-22 09:18:07 :: [aarch64] #300 openscada-UI.QTCfg-debuginfo: install check OK
2018-Jun-22 09:19:51 :: [aarch64] #300 openscada-UI.QTStarter: install check OK
2018-Jun-22 09:22:37 :: [aarch64] #300 openscada-UI.QTStarter-debuginfo: install check OK
2018-Jun-22 09:24:17 :: [aarch64] #300 openscada-UI.VCAEngine: install check OK
2018-Jun-22 09:25:55 :: [aarch64] #300 openscada-UI.VCAEngine-debuginfo: install check OK
2018-Jun-22 09:27:38 :: [aarch64] #300 openscada-UI.Vision: install check OK
2018-Jun-22 09:30:09 :: [aarch64] #300 openscada-UI.Vision-debuginfo: install check OK
2018-Jun-22 09:31:51 :: [aarch64] #300 openscada-UI.WebCfg: install check OK
2018-Jun-22 09:33:34 :: [aarch64] #300 openscada-UI.WebCfg-debuginfo: install check OK
2018-Jun-22 09:35:09 :: [aarch64] #300 openscada-UI.WebCfgD: install check OK
2018-Jun-22 09:36:49 :: [aarch64] #300 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Jun-22 09:38:25 :: [aarch64] #300 openscada-UI.WebUser: install check OK
2018-Jun-22 09:40:02 :: [aarch64] #300 openscada-UI.WebUser-debuginfo: install check OK
2018-Jun-22 09:41:46 :: [aarch64] #300 openscada-UI.WebVision: install check OK
2018-Jun-22 09:43:35 :: [aarch64] #300 openscada-UI.WebVision-debuginfo: install check OK
aarch64: openscada-core=0.9.0-alt1 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Jun-22 09:45:13 :: [aarch64] #300 openscada-core: install check OK
2018-Jun-22 09:46:52 :: [aarch64] #300 openscada-core-debuginfo: install check OK
2018-Jun-22 09:48:32 :: [aarch64] #300 openscada-devel: install check OK
aarch64: openscada-docEN=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-22 09:49:24 :: [aarch64] #300 openscada-docEN: install check OK
aarch64: openscada-docRU=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-22 09:50:16 :: [aarch64] #300 openscada-docRU: install check OK
aarch64: openscada-docUK=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-22 09:51:09 :: [aarch64] #300 openscada-docUK: install check OK
2018-Jun-22 09:52:43 :: [aarch64] #300 openscada-plc: install check OK
2018-Jun-22 09:54:30 :: [aarch64] #300 openscada-server: install check OK
2018-Jun-22 09:56:09 :: [aarch64] #300 openscada-visStation: install check OK
2018-Jun-22 09:56:24 :: [x86_64-i586] plan: #44 +44 -41 =11475
2018-Jun-22 09:58:36 :: [x86_64-i586] arepo build OK
2018-Jun-22 09:59:53 :: [x86_64-i586] generated apt indices
2018-Jun-22 09:59:53 :: [x86_64-i586] created next repo
2018-Jun-22 10:00:01 :: [x86_64-i586] dependencies check OK
2018-Jun-22 10:00:03 :: gears inheritance check OK
2018-Jun-22 10:00:03 :: srpm inheritance check OK
girar-check-perms: access to openscada ALLOWED for antohami: project leader
2018-Jun-22 10:00:03 :: acl check OK
2018-Jun-22 10:00:42 :: created contents_index files
2018-Jun-22 10:00:55 :: created hash files: aarch64 i586 noarch src x86_64-i586 x86_64
2018-Jun-22 10:00:57 :: task #208630 for sisyphus TESTED
More information about the Sisyphus-incominger
mailing list