[#208630] TESTED (try 3) openscada.git=0.9.0-alt1
Girar Builder awaiter robot
girar-builder at altlinux.org
Tue Jun 19 18:08:13 MSK 2018
http://git.altlinux.org/tasks/208630/logs/events.3.1.log
2018-Jun-19 11:09:22 :: test-only task #208630 for sisyphus resumed by root_ldv:
#100 removed
#200 build 0.9.0-alt1 from /people/antohami/packages/openscada.git fetched at 2018-Jun-19 07:21:37
2018-Jun-19 11:09:22 :: [x86_64] #200 openscada.git 0.9.0-alt1: build start
2018-Jun-19 11:09:22 :: [i586] #200 openscada.git 0.9.0-alt1: build start
2018-Jun-19 11:09:22 :: [aarch64] #200 openscada.git 0.9.0-alt1: build start
2018-Jun-19 11:29:53 :: [x86_64] #200 openscada.git 0.9.0-alt1: build OK
2018-Jun-19 11:32:58 :: [i586] #200 openscada.git 0.9.0-alt1: build OK
2018-Jun-19 12:06:17 :: [aarch64] #200 openscada.git 0.9.0-alt1: build OK
2018-Jun-19 12:09:12 :: build check OK
2018-Jun-19 12:10:37 :: noarch check OK
2018-Jun-19 12:10:39 :: plan: src +1 -1 =18566, aarch64 +84 -80 =28458, i586 +88 -84 =34147, noarch +10 -8 =18955, x86_64 +84 -80 =34185
2018-Jun-19 12:10:40 :: version check OK
2018-Jun-19 12:11:30 :: generated apt indices
2018-Jun-19 12:11:30 :: created next repo
2018-Jun-19 12:11:54 :: dependencies check OK
2018-Jun-19 12:12:28 :: ELF symbols check OK
2018-Jun-19 12:13:33 :: [x86_64] #200 openscada: install check OK
2018-Jun-19 12:13:36 :: [i586] #200 openscada: install check OK
2018-Jun-19 12:14:19 :: [x86_64] #200 openscada-Archive.DBArch: install check OK
2018-Jun-19 12:14:26 :: [i586] #200 openscada-Archive.DBArch: install check OK
2018-Jun-19 12:14:38 :: [aarch64] #200 openscada: install check OK
2018-Jun-19 12:15:08 :: [x86_64] #200 openscada-Archive.DBArch-debuginfo: install check OK
2018-Jun-19 12:15:19 :: [i586] #200 openscada-Archive.DBArch-debuginfo: install check OK
2018-Jun-19 12:15:55 :: [x86_64] #200 openscada-Archive.FSArch: install check OK
2018-Jun-19 12:16:10 :: [i586] #200 openscada-Archive.FSArch: install check OK
2018-Jun-19 12:16:27 :: [aarch64] #200 openscada-Archive.DBArch: install check OK
2018-Jun-19 12:16:44 :: [x86_64] #200 openscada-Archive.FSArch-debuginfo: install check OK
2018-Jun-19 12:17:03 :: [i586] #200 openscada-Archive.FSArch-debuginfo: install check OK
2018-Jun-19 12:17:30 :: [x86_64] #200 openscada-DAQ.AMRDevs: install check OK
2018-Jun-19 12:17:54 :: [i586] #200 openscada-DAQ.AMRDevs: install check OK
2018-Jun-19 12:18:12 :: [aarch64] #200 openscada-Archive.DBArch-debuginfo: install check OK
2018-Jun-19 12:18:16 :: [x86_64] #200 openscada-DAQ.AMRDevs-debuginfo: install check OK
2018-Jun-19 12:18:45 :: [i586] #200 openscada-DAQ.AMRDevs-debuginfo: install check OK
x86_64: openscada-DAQ.BFN=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/BFN
2018-Jun-19 12:18:59 :: [x86_64] #200 openscada-DAQ.BFN: install check OK
i586: openscada-DAQ.BFN=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/BFN
2018-Jun-19 12:19:32 :: [i586] #200 openscada-DAQ.BFN: install check OK
2018-Jun-19 12:19:42 :: [x86_64] #200 openscada-DAQ.BFN-debuginfo: install check OK
2018-Jun-19 12:19:49 :: [aarch64] #200 openscada-Archive.FSArch: install check OK
2018-Jun-19 12:20:19 :: [i586] #200 openscada-DAQ.BFN-debuginfo: install check OK
2018-Jun-19 12:20:25 :: [x86_64] #200 openscada-DAQ.BlockCalc: install check OK
2018-Jun-19 12:21:03 :: [i586] #200 openscada-DAQ.BlockCalc: install check OK
2018-Jun-19 12:21:09 :: [x86_64] #200 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Jun-19 12:21:30 :: [aarch64] #200 openscada-Archive.FSArch-debuginfo: install check OK
2018-Jun-19 12:21:50 :: [x86_64] #200 openscada-DAQ.Comedi: install check OK
2018-Jun-19 12:21:51 :: [i586] #200 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Jun-19 12:22:33 :: [x86_64] #200 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Jun-19 12:22:36 :: [i586] #200 openscada-DAQ.Comedi: install check OK
2018-Jun-19 12:23:15 :: [x86_64] #200 openscada-DAQ.DAQGate: install check OK
2018-Jun-19 12:23:18 :: [aarch64] #200 openscada-DAQ.AMRDevs: install check OK
2018-Jun-19 12:23:22 :: [i586] #200 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Jun-19 12:23:59 :: [x86_64] #200 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Jun-19 12:24:06 :: [i586] #200 openscada-DAQ.DAQGate: install check OK
2018-Jun-19 12:24:41 :: [x86_64] #200 openscada-DAQ.DCON: install check OK
2018-Jun-19 12:24:53 :: [i586] #200 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Jun-19 12:24:59 :: [aarch64] #200 openscada-DAQ.AMRDevs-debuginfo: install check OK
2018-Jun-19 12:25:24 :: [x86_64] #200 openscada-DAQ.DCON-debuginfo: install check OK
2018-Jun-19 12:25:39 :: [i586] #200 openscada-DAQ.DCON: install check OK
2018-Jun-19 12:26:06 :: [x86_64] #200 openscada-DAQ.JavaLikeCalc: install check OK
2018-Jun-19 12:26:26 :: [i586] #200 openscada-DAQ.DCON-debuginfo: install check OK
aarch64: openscada-DAQ.BFN=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/BFN
2018-Jun-19 12:26:28 :: [aarch64] #200 openscada-DAQ.BFN: install check OK
2018-Jun-19 12:26:50 :: [x86_64] #200 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Jun-19 12:27:11 :: [i586] #200 openscada-DAQ.DiamondBoards: install check OK
2018-Jun-19 12:27:32 :: [x86_64] #200 openscada-DAQ.LogicLev: install check OK
2018-Jun-19 12:27:59 :: [i586] #200 openscada-DAQ.DiamondBoards-debuginfo: install check OK
2018-Jun-19 12:28:10 :: [aarch64] #200 openscada-DAQ.BFN-debuginfo: install check OK
2018-Jun-19 12:28:17 :: [x86_64] #200 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Jun-19 12:28:44 :: [i586] #200 openscada-DAQ.ICP_DAS: install check OK
2018-Jun-19 12:28:58 :: [x86_64] #200 openscada-DAQ.MMS: install check OK
2018-Jun-19 12:29:31 :: [i586] #200 openscada-DAQ.ICP_DAS-debuginfo: install check OK
2018-Jun-19 12:29:42 :: [x86_64] #200 openscada-DAQ.MMS-debuginfo: install check OK
2018-Jun-19 12:29:58 :: [aarch64] #200 openscada-DAQ.BlockCalc: install check OK
2018-Jun-19 12:30:16 :: [i586] #200 openscada-DAQ.JavaLikeCalc: install check OK
2018-Jun-19 12:30:23 :: [x86_64] #200 openscada-DAQ.ModBus: install check OK
2018-Jun-19 12:31:04 :: [i586] #200 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Jun-19 12:31:06 :: [x86_64] #200 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Jun-19 12:31:36 :: [aarch64] #200 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Jun-19 12:31:47 :: [x86_64] #200 openscada-DAQ.OPC_UA: install check OK
2018-Jun-19 12:31:49 :: [i586] #200 openscada-DAQ.LogicLev: install check OK
2018-Jun-19 12:32:32 :: [x86_64] #200 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Jun-19 12:32:36 :: [i586] #200 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Jun-19 12:33:13 :: [aarch64] #200 openscada-DAQ.Comedi: install check OK
2018-Jun-19 12:33:15 :: [x86_64] #200 openscada-DAQ.SNMP: install check OK
2018-Jun-19 12:33:22 :: [i586] #200 openscada-DAQ.MMS: install check OK
2018-Jun-19 12:34:01 :: [x86_64] #200 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Jun-19 12:34:10 :: [i586] #200 openscada-DAQ.MMS-debuginfo: install check OK
2018-Jun-19 12:34:42 :: [x86_64] #200 openscada-DAQ.Siemens: install check OK
2018-Jun-19 12:34:50 :: [aarch64] #200 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Jun-19 12:34:55 :: [i586] #200 openscada-DAQ.ModBus: install check OK
2018-Jun-19 12:35:25 :: [x86_64] #200 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Jun-19 12:35:42 :: [i586] #200 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Jun-19 12:36:06 :: [x86_64] #200 openscada-DAQ.SoundCard: install check OK
2018-Jun-19 12:36:23 :: [aarch64] #200 openscada-DAQ.DAQGate: install check OK
2018-Jun-19 12:36:27 :: [i586] #200 openscada-DAQ.OPC_UA: install check OK
2018-Jun-19 12:36:50 :: [x86_64] #200 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Jun-19 12:37:15 :: [i586] #200 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Jun-19 12:37:35 :: [x86_64] #200 openscada-DAQ.System: install check OK
2018-Jun-19 12:38:00 :: [i586] #200 openscada-DAQ.SNMP: install check OK
2018-Jun-19 12:38:02 :: [aarch64] #200 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Jun-19 12:38:19 :: [x86_64] #200 openscada-DAQ.System-debuginfo: install check OK
2018-Jun-19 12:38:53 :: [i586] #200 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Jun-19 12:39:00 :: [x86_64] #200 openscada-DB.DBF: install check OK
2018-Jun-19 12:39:33 :: [aarch64] #200 openscada-DAQ.DCON: install check OK
2018-Jun-19 12:39:38 :: [i586] #200 openscada-DAQ.Siemens: install check OK
2018-Jun-19 12:39:44 :: [x86_64] #200 openscada-DB.DBF-debuginfo: install check OK
2018-Jun-19 12:40:25 :: [x86_64] #200 openscada-DB.FireBird: install check OK
2018-Jun-19 12:40:26 :: [i586] #200 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Jun-19 12:41:09 :: [x86_64] #200 openscada-DB.FireBird-debuginfo: install check OK
2018-Jun-19 12:41:10 :: [aarch64] #200 openscada-DAQ.DCON-debuginfo: install check OK
2018-Jun-19 12:41:11 :: [i586] #200 openscada-DAQ.SoundCard: install check OK
2018-Jun-19 12:41:49 :: [x86_64] #200 openscada-DB.MySQL: install check OK
2018-Jun-19 12:41:58 :: [i586] #200 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Jun-19 12:42:34 :: [x86_64] #200 openscada-DB.MySQL-debuginfo: install check OK
2018-Jun-19 12:42:42 :: [aarch64] #200 openscada-DAQ.JavaLikeCalc: install check OK
2018-Jun-19 12:42:43 :: [i586] #200 openscada-DAQ.System: install check OK
2018-Jun-19 12:43:15 :: [x86_64] #200 openscada-DB.PostgreSQL: install check OK
2018-Jun-19 12:43:30 :: [i586] #200 openscada-DAQ.System-debuginfo: install check OK
2018-Jun-19 12:44:00 :: [x86_64] #200 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Jun-19 12:44:14 :: [i586] #200 openscada-DB.DBF: install check OK
2018-Jun-19 12:44:21 :: [aarch64] #200 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Jun-19 12:44:42 :: [x86_64] #200 openscada-DB.SQLite: install check OK
2018-Jun-19 12:45:02 :: [i586] #200 openscada-DB.DBF-debuginfo: install check OK
2018-Jun-19 12:45:26 :: [x86_64] #200 openscada-DB.SQLite-debuginfo: install check OK
2018-Jun-19 12:45:47 :: [i586] #200 openscada-DB.FireBird: install check OK
2018-Jun-19 12:45:56 :: [aarch64] #200 openscada-DAQ.LogicLev: install check OK
x86_64: openscada-LibDB.Main=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/LibsDB
2018-Jun-19 12:46:07 :: [x86_64] #200 openscada-LibDB.Main: install check OK
2018-Jun-19 12:46:36 :: [i586] #200 openscada-DB.FireBird-debuginfo: install check OK
x86_64: openscada-LibDB.VCA=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/LibsDB
2018-Jun-19 12:46:49 :: [x86_64] #200 openscada-LibDB.VCA: install check OK
2018-Jun-19 12:47:22 :: [i586] #200 openscada-DB.MySQL: install check OK
2018-Jun-19 12:47:32 :: [aarch64] #200 openscada-DAQ.LogicLev-debuginfo: install check OK
x86_64: openscada-Model.AGLKS=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/AGLKS
2018-Jun-19 12:47:33 :: [x86_64] #200 openscada-Model.AGLKS: install check OK
2018-Jun-19 12:48:12 :: [i586] #200 openscada-DB.MySQL-debuginfo: install check OK
x86_64: openscada-Model.Boiler=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/Boiler
2018-Jun-19 12:48:16 :: [x86_64] #200 openscada-Model.Boiler: install check OK
2018-Jun-19 12:48:57 :: [i586] #200 openscada-DB.PostgreSQL: install check OK
2018-Jun-19 12:48:57 :: [x86_64] #200 openscada-Protocol.HTTP: install check OK
2018-Jun-19 12:49:06 :: [aarch64] #200 openscada-DAQ.MMS: install check OK
2018-Jun-19 12:49:41 :: [x86_64] #200 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Jun-19 12:49:47 :: [i586] #200 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Jun-19 12:50:24 :: [x86_64] #200 openscada-Protocol.SelfSystem: install check OK
2018-Jun-19 12:50:31 :: [i586] #200 openscada-DB.SQLite: install check OK
2018-Jun-19 12:50:43 :: [aarch64] #200 openscada-DAQ.MMS-debuginfo: install check OK
2018-Jun-19 12:51:10 :: [x86_64] #200 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Jun-19 12:51:20 :: [i586] #200 openscada-DB.SQLite-debuginfo: install check OK
2018-Jun-19 12:51:53 :: [x86_64] #200 openscada-Protocol.UserProtocol: install check OK
i586: openscada-LibDB.Main=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/LibsDB
2018-Jun-19 12:52:08 :: [i586] #200 openscada-LibDB.Main: install check OK
2018-Jun-19 12:52:18 :: [aarch64] #200 openscada-DAQ.ModBus: install check OK
2018-Jun-19 12:52:39 :: [x86_64] #200 openscada-Protocol.UserProtocol-debuginfo: install check OK
i586: openscada-LibDB.VCA=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/LibsDB
2018-Jun-19 12:52:55 :: [i586] #200 openscada-LibDB.VCA: install check OK
2018-Jun-19 12:53:22 :: [x86_64] #200 openscada-Special.FLibComplex1: install check OK
i586: openscada-Model.AGLKS=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/AGLKS
2018-Jun-19 12:53:45 :: [i586] #200 openscada-Model.AGLKS: install check OK
2018-Jun-19 12:54:07 :: [x86_64] #200 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Jun-19 12:54:09 :: [aarch64] #200 openscada-DAQ.ModBus-debuginfo: install check OK
i586: openscada-Model.Boiler=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/Boiler
2018-Jun-19 12:54:35 :: [i586] #200 openscada-Model.Boiler: install check OK
2018-Jun-19 12:54:51 :: [x86_64] #200 openscada-Special.FLibMath: install check OK
2018-Jun-19 12:55:22 :: [i586] #200 openscada-Protocol.HTTP: install check OK
2018-Jun-19 12:55:39 :: [x86_64] #200 openscada-Special.FLibMath-debuginfo: install check OK
2018-Jun-19 12:55:45 :: [aarch64] #200 openscada-DAQ.OPC_UA: install check OK
2018-Jun-19 12:56:13 :: [i586] #200 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Jun-19 12:56:18 :: [x86_64] #200 openscada-Special.FLibSYS: install check OK
2018-Jun-19 12:56:59 :: [i586] #200 openscada-Protocol.SelfSystem: install check OK
2018-Jun-19 12:57:01 :: [x86_64] #200 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Jun-19 12:57:32 :: [aarch64] #200 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Jun-19 12:57:41 :: [x86_64] #200 openscada-Special.SystemTests: install check OK
2018-Jun-19 12:57:46 :: [i586] #200 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Jun-19 12:58:25 :: [x86_64] #200 openscada-Special.SystemTests-debuginfo: install check OK
2018-Jun-19 12:58:32 :: [i586] #200 openscada-Protocol.UserProtocol: install check OK
2018-Jun-19 12:59:06 :: [x86_64] #200 openscada-Transport.SSL: install check OK
2018-Jun-19 12:59:14 :: [aarch64] #200 openscada-DAQ.SNMP: install check OK
2018-Jun-19 12:59:23 :: [i586] #200 openscada-Protocol.UserProtocol-debuginfo: install check OK
2018-Jun-19 12:59:56 :: [x86_64] #200 openscada-Transport.SSL-debuginfo: install check OK
2018-Jun-19 13:00:06 :: [i586] #200 openscada-Special.FLibComplex1: install check OK
2018-Jun-19 13:00:35 :: [x86_64] #200 openscada-Transport.Serial: install check OK
2018-Jun-19 13:00:50 :: [i586] #200 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Jun-19 13:01:05 :: [aarch64] #200 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Jun-19 13:01:18 :: [x86_64] #200 openscada-Transport.Serial-debuginfo: install check OK
2018-Jun-19 13:01:35 :: [i586] #200 openscada-Special.FLibMath: install check OK
2018-Jun-19 13:01:59 :: [x86_64] #200 openscada-Transport.Sockets: install check OK
2018-Jun-19 13:02:23 :: [i586] #200 openscada-Special.FLibMath-debuginfo: install check OK
2018-Jun-19 13:02:43 :: [x86_64] #200 openscada-Transport.Sockets-debuginfo: install check OK
2018-Jun-19 13:02:43 :: [aarch64] #200 openscada-DAQ.Siemens: install check OK
2018-Jun-19 13:03:08 :: [i586] #200 openscada-Special.FLibSYS: install check OK
2018-Jun-19 13:03:28 :: [x86_64] #200 openscada-UI.QTCfg: install check OK
2018-Jun-19 13:03:59 :: [i586] #200 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Jun-19 13:04:27 :: [aarch64] #200 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Jun-19 13:04:42 :: [x86_64] #200 openscada-UI.QTCfg-debuginfo: install check OK
2018-Jun-19 13:04:45 :: [i586] #200 openscada-Special.SystemTests: install check OK
2018-Jun-19 13:05:25 :: [x86_64] #200 openscada-UI.QTStarter: install check OK
2018-Jun-19 13:05:33 :: [i586] #200 openscada-Special.SystemTests-debuginfo: install check OK
2018-Jun-19 13:06:09 :: [aarch64] #200 openscada-DAQ.SoundCard: install check OK
2018-Jun-19 13:06:18 :: [i586] #200 openscada-Transport.SSL: install check OK
2018-Jun-19 13:06:45 :: [x86_64] #200 openscada-UI.QTStarter-debuginfo: install check OK
2018-Jun-19 13:07:07 :: [i586] #200 openscada-Transport.SSL-debuginfo: install check OK
2018-Jun-19 13:07:28 :: [x86_64] #200 openscada-UI.VCAEngine: install check OK
2018-Jun-19 13:07:52 :: [i586] #200 openscada-Transport.Serial: install check OK
2018-Jun-19 13:07:58 :: [aarch64] #200 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Jun-19 13:08:12 :: [x86_64] #200 openscada-UI.VCAEngine-debuginfo: install check OK
2018-Jun-19 13:08:41 :: [i586] #200 openscada-Transport.Serial-debuginfo: install check OK
2018-Jun-19 13:08:54 :: [x86_64] #200 openscada-UI.Vision: install check OK
2018-Jun-19 13:09:30 :: [i586] #200 openscada-Transport.Sockets: install check OK
2018-Jun-19 13:09:34 :: [aarch64] #200 openscada-DAQ.System: install check OK
2018-Jun-19 13:10:04 :: [x86_64] #200 openscada-UI.Vision-debuginfo: install check OK
2018-Jun-19 13:10:18 :: [i586] #200 openscada-Transport.Sockets-debuginfo: install check OK
2018-Jun-19 13:10:46 :: [x86_64] #200 openscada-UI.WebCfg: install check OK
2018-Jun-19 13:11:05 :: [i586] #200 openscada-UI.QTCfg: install check OK
2018-Jun-19 13:11:20 :: [aarch64] #200 openscada-DAQ.System-debuginfo: install check OK
2018-Jun-19 13:11:30 :: [x86_64] #200 openscada-UI.WebCfg-debuginfo: install check OK
2018-Jun-19 13:12:12 :: [x86_64] #200 openscada-UI.WebCfgD: install check OK
2018-Jun-19 13:12:23 :: [i586] #200 openscada-UI.QTCfg-debuginfo: install check OK
2018-Jun-19 13:12:54 :: [aarch64] #200 openscada-DB.DBF: install check OK
2018-Jun-19 13:12:56 :: [x86_64] #200 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Jun-19 13:13:11 :: [i586] #200 openscada-UI.QTStarter: install check OK
2018-Jun-19 13:13:38 :: [x86_64] #200 openscada-UI.WebUser: install check OK
2018-Jun-19 13:14:23 :: [x86_64] #200 openscada-UI.WebUser-debuginfo: install check OK
2018-Jun-19 13:14:38 :: [aarch64] #200 openscada-DB.DBF-debuginfo: install check OK
2018-Jun-19 13:14:40 :: [i586] #200 openscada-UI.QTStarter-debuginfo: install check OK
2018-Jun-19 13:15:04 :: [x86_64] #200 openscada-UI.WebVision: install check OK
2018-Jun-19 13:15:26 :: [i586] #200 openscada-UI.VCAEngine: install check OK
2018-Jun-19 13:15:52 :: [x86_64] #200 openscada-UI.WebVision-debuginfo: install check OK
2018-Jun-19 13:16:12 :: [aarch64] #200 openscada-DB.FireBird: install check OK
2018-Jun-19 13:16:13 :: [i586] #200 openscada-UI.VCAEngine-debuginfo: install check OK
x86_64: openscada-core=0.9.0-alt1 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Jun-19 13:16:31 :: [x86_64] #200 openscada-core: install check OK
2018-Jun-19 13:16:57 :: [i586] #200 openscada-UI.Vision: install check OK
2018-Jun-19 13:17:13 :: [x86_64] #200 openscada-core-debuginfo: install check OK
2018-Jun-19 13:17:51 :: [aarch64] #200 openscada-DB.FireBird-debuginfo: install check OK
2018-Jun-19 13:17:53 :: [x86_64] #200 openscada-devel: install check OK
x86_64: openscada-docEN=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 13:18:12 :: [x86_64] #200 openscada-docEN: install check OK
2018-Jun-19 13:18:14 :: [i586] #200 openscada-UI.Vision-debuginfo: install check OK
x86_64: openscada-docRU=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 13:18:29 :: [x86_64] #200 openscada-docRU: install check OK
x86_64: openscada-docUK=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 13:18:48 :: [x86_64] #200 openscada-docUK: install check OK
2018-Jun-19 13:19:07 :: [i586] #200 openscada-UI.WebCfg: install check OK
2018-Jun-19 13:19:30 :: [x86_64] #200 openscada-plc: install check OK
2018-Jun-19 13:19:43 :: [aarch64] #200 openscada-DB.MySQL: install check OK
2018-Jun-19 13:19:51 :: [i586] #200 openscada-UI.WebCfg-debuginfo: install check OK
2018-Jun-19 13:20:10 :: [x86_64] #200 openscada-server: install check OK
2018-Jun-19 13:20:33 :: [i586] #200 openscada-UI.WebCfgD: install check OK
2018-Jun-19 13:20:52 :: [x86_64] #200 openscada-visStation: install check OK
2018-Jun-19 13:21:18 :: [i586] #200 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Jun-19 13:21:26 :: [aarch64] #200 openscada-DB.MySQL-debuginfo: install check OK
2018-Jun-19 13:22:02 :: [i586] #200 openscada-UI.WebUser: install check OK
2018-Jun-19 13:22:51 :: [i586] #200 openscada-UI.WebUser-debuginfo: install check OK
2018-Jun-19 13:23:12 :: [aarch64] #200 openscada-DB.PostgreSQL: install check OK
2018-Jun-19 13:23:36 :: [i586] #200 openscada-UI.WebVision: install check OK
2018-Jun-19 13:24:32 :: [i586] #200 openscada-UI.WebVision-debuginfo: install check OK
2018-Jun-19 13:25:10 :: [aarch64] #200 openscada-DB.PostgreSQL-debuginfo: install check OK
i586: openscada-core=0.9.0-alt1 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Jun-19 13:25:23 :: [i586] #200 openscada-core: install check OK
2018-Jun-19 13:26:16 :: [i586] #200 openscada-core-debuginfo: install check OK
2018-Jun-19 13:26:50 :: [aarch64] #200 openscada-DB.SQLite: install check OK
2018-Jun-19 13:27:07 :: [i586] #200 openscada-devel: install check OK
i586: openscada-docEN=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 13:27:29 :: [i586] #200 openscada-docEN: install check OK
i586: openscada-docRU=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 13:27:51 :: [i586] #200 openscada-docRU: install check OK
i586: openscada-docUK=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 13:28:13 :: [i586] #200 openscada-docUK: install check OK
2018-Jun-19 13:28:38 :: [aarch64] #200 openscada-DB.SQLite-debuginfo: install check OK
2018-Jun-19 13:29:04 :: [i586] #200 openscada-plc: install check OK
2018-Jun-19 13:29:56 :: [i586] #200 openscada-server: install check OK
aarch64: openscada-LibDB.Main=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/LibsDB
2018-Jun-19 13:30:25 :: [aarch64] #200 openscada-LibDB.Main: install check OK
2018-Jun-19 13:30:47 :: [i586] #200 openscada-visStation: install check OK
aarch64: openscada-LibDB.VCA=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/LibsDB
2018-Jun-19 13:32:10 :: [aarch64] #200 openscada-LibDB.VCA: install check OK
aarch64: openscada-Model.AGLKS=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/AGLKS
2018-Jun-19 13:34:11 :: [aarch64] #200 openscada-Model.AGLKS: install check OK
aarch64: openscada-Model.Boiler=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/Boiler
2018-Jun-19 13:36:24 :: [aarch64] #200 openscada-Model.Boiler: install check OK
2018-Jun-19 13:38:13 :: [aarch64] #200 openscada-Protocol.HTTP: install check OK
2018-Jun-19 13:40:01 :: [aarch64] #200 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Jun-19 13:41:47 :: [aarch64] #200 openscada-Protocol.SelfSystem: install check OK
2018-Jun-19 13:43:32 :: [aarch64] #200 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Jun-19 13:45:10 :: [aarch64] #200 openscada-Protocol.UserProtocol: install check OK
2018-Jun-19 13:47:00 :: [aarch64] #200 openscada-Protocol.UserProtocol-debuginfo: install check OK
2018-Jun-19 13:48:40 :: [aarch64] #200 openscada-Special.FLibComplex1: install check OK
2018-Jun-19 13:50:23 :: [aarch64] #200 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Jun-19 13:51:59 :: [aarch64] #200 openscada-Special.FLibMath: install check OK
2018-Jun-19 13:53:46 :: [aarch64] #200 openscada-Special.FLibMath-debuginfo: install check OK
2018-Jun-19 13:55:30 :: [aarch64] #200 openscada-Special.FLibSYS: install check OK
2018-Jun-19 13:57:19 :: [aarch64] #200 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Jun-19 13:58:58 :: [aarch64] #200 openscada-Special.SystemTests: install check OK
2018-Jun-19 14:00:46 :: [aarch64] #200 openscada-Special.SystemTests-debuginfo: install check OK
2018-Jun-19 14:02:29 :: [aarch64] #200 openscada-Transport.SSL: install check OK
2018-Jun-19 14:04:12 :: [aarch64] #200 openscada-Transport.SSL-debuginfo: install check OK
2018-Jun-19 14:05:56 :: [aarch64] #200 openscada-Transport.Serial: install check OK
2018-Jun-19 14:07:33 :: [aarch64] #200 openscada-Transport.Serial-debuginfo: install check OK
2018-Jun-19 14:09:04 :: [aarch64] #200 openscada-Transport.Sockets: install check OK
2018-Jun-19 14:10:46 :: [aarch64] #200 openscada-Transport.Sockets-debuginfo: install check OK
2018-Jun-19 14:13:04 :: [aarch64] #200 openscada-UI.QTCfg: install check OK
2018-Jun-19 14:16:52 :: [aarch64] #200 openscada-UI.QTCfg-debuginfo: install check OK
2018-Jun-19 14:20:39 :: [aarch64] #200 openscada-UI.QTStarter: install check OK
2018-Jun-19 14:25:35 :: [aarch64] #200 openscada-UI.QTStarter-debuginfo: install check OK
2018-Jun-19 14:28:18 :: [aarch64] #200 openscada-UI.VCAEngine: install check OK
2018-Jun-19 14:30:26 :: [aarch64] #200 openscada-UI.VCAEngine-debuginfo: install check OK
2018-Jun-19 14:32:30 :: [aarch64] #200 openscada-UI.Vision: install check OK
2018-Jun-19 14:35:03 :: [aarch64] #200 openscada-UI.Vision-debuginfo: install check OK
2018-Jun-19 14:36:43 :: [aarch64] #200 openscada-UI.WebCfg: install check OK
2018-Jun-19 14:38:39 :: [aarch64] #200 openscada-UI.WebCfg-debuginfo: install check OK
2018-Jun-19 14:40:24 :: [aarch64] #200 openscada-UI.WebCfgD: install check OK
2018-Jun-19 14:42:06 :: [aarch64] #200 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Jun-19 14:43:43 :: [aarch64] #200 openscada-UI.WebUser: install check OK
2018-Jun-19 14:45:30 :: [aarch64] #200 openscada-UI.WebUser-debuginfo: install check OK
2018-Jun-19 14:47:17 :: [aarch64] #200 openscada-UI.WebVision: install check OK
2018-Jun-19 14:49:14 :: [aarch64] #200 openscada-UI.WebVision-debuginfo: install check OK
aarch64: openscada-core=0.9.0-alt1 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Jun-19 14:50:58 :: [aarch64] #200 openscada-core: install check OK
2018-Jun-19 14:52:56 :: [aarch64] #200 openscada-core-debuginfo: install check OK
2018-Jun-19 14:54:39 :: [aarch64] #200 openscada-devel: install check OK
aarch64: openscada-docEN=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 14:55:37 :: [aarch64] #200 openscada-docEN: install check OK
aarch64: openscada-docRU=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 14:56:31 :: [aarch64] #200 openscada-docRU: install check OK
aarch64: openscada-docUK=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 14:57:21 :: [aarch64] #200 openscada-docUK: install check OK
2018-Jun-19 14:59:02 :: [aarch64] #200 openscada-plc: install check OK
2018-Jun-19 15:01:02 :: [aarch64] #200 openscada-server: install check OK
2018-Jun-19 15:02:53 :: [aarch64] #200 openscada-visStation: install check OK
2018-Jun-19 15:03:07 :: [x86_64-i586] plan: #44 +44 -41 =11465
2018-Jun-19 15:07:02 :: [x86_64-i586] arepo build OK
2018-Jun-19 15:07:19 :: [x86_64-i586] generated apt indices
2018-Jun-19 15:07:19 :: [x86_64-i586] created next repo
2018-Jun-19 15:07:27 :: [x86_64-i586] dependencies check OK
2018-Jun-19 15:07:28 :: gears inheritance check OK
2018-Jun-19 15:07:28 :: srpm inheritance check OK
girar-check-perms: access to openscada ALLOWED for antohami: project leader
2018-Jun-19 15:07:29 :: acl check OK
2018-Jun-19 15:07:58 :: created contents_index files
2018-Jun-19 15:08:11 :: created hash files: aarch64 i586 noarch src x86_64-i586 x86_64
2018-Jun-19 15:08:13 :: task #208630 for sisyphus TESTED
More information about the Sisyphus-incominger
mailing list