[#208630] FAILED (try 2) openscada.git=0.9.0-alt1
Girar Builder awaiter robot
girar-builder at altlinux.org
Tue Jun 19 14:02:01 MSK 2018
http://git.altlinux.org/tasks/208630/logs/events.2.1.log
2018-Jun-19 07:22:14 :: test-only task #208630 for sisyphus resumed by antohami:
#100 removed
#200 build 0.9.0-alt1 from /people/antohami/packages/openscada.git fetched at 2018-Jun-19 07:21:37
2018-Jun-19 07:22:15 :: [aarch64] #200 openscada.git 0.9.0-alt1: build start
2018-Jun-19 07:22:15 :: [x86_64] #200 openscada.git 0.9.0-alt1: build start
2018-Jun-19 07:22:15 :: [i586] #200 openscada.git 0.9.0-alt1: build start
2018-Jun-19 07:41:53 :: [x86_64] #200 openscada.git 0.9.0-alt1: build OK
2018-Jun-19 07:45:04 :: [i586] #200 openscada.git 0.9.0-alt1: build OK
2018-Jun-19 08:09:53 :: [aarch64] #200 openscada.git 0.9.0-alt1: build OK
2018-Jun-19 08:12:43 :: build check OK
2018-Jun-19 08:14:17 :: noarch check OK
2018-Jun-19 08:14:19 :: plan: src +1 -1 =18566, aarch64 +84 -80 =28458, i586 +88 -84 =34147, noarch +10 -8 =18955, x86_64 +84 -80 =34185
2018-Jun-19 08:14:19 :: version check OK
2018-Jun-19 08:15:14 :: generated apt indices
2018-Jun-19 08:15:14 :: created next repo
2018-Jun-19 08:15:40 :: dependencies check OK
2018-Jun-19 08:16:15 :: ELF symbols check OK
2018-Jun-19 08:17:11 :: [x86_64] #200 openscada: install check OK
2018-Jun-19 08:17:14 :: [i586] #200 openscada: install check OK
2018-Jun-19 08:17:50 :: [x86_64] #200 openscada-Archive.DBArch: install check OK
2018-Jun-19 08:17:57 :: [i586] #200 openscada-Archive.DBArch: install check OK
2018-Jun-19 08:18:19 :: [aarch64] #200 openscada: install check OK
2018-Jun-19 08:18:32 :: [x86_64] #200 openscada-Archive.DBArch-debuginfo: install check OK
2018-Jun-19 08:18:42 :: [i586] #200 openscada-Archive.DBArch-debuginfo: install check OK
2018-Jun-19 08:19:11 :: [x86_64] #200 openscada-Archive.FSArch: install check OK
2018-Jun-19 08:19:26 :: [i586] #200 openscada-Archive.FSArch: install check OK
2018-Jun-19 08:19:52 :: [x86_64] #200 openscada-Archive.FSArch-debuginfo: install check OK
2018-Jun-19 08:19:58 :: [aarch64] #200 openscada-Archive.DBArch: install check OK
2018-Jun-19 08:20:11 :: [i586] #200 openscada-Archive.FSArch-debuginfo: install check OK
2018-Jun-19 08:20:32 :: [x86_64] #200 openscada-DAQ.AMRDevs: install check OK
2018-Jun-19 08:20:56 :: [i586] #200 openscada-DAQ.AMRDevs: install check OK
2018-Jun-19 08:21:14 :: [x86_64] #200 openscada-DAQ.AMRDevs-debuginfo: install check OK
2018-Jun-19 08:21:37 :: [aarch64] #200 openscada-Archive.DBArch-debuginfo: install check OK
2018-Jun-19 08:21:41 :: [i586] #200 openscada-DAQ.AMRDevs-debuginfo: install check OK
x86_64: openscada-DAQ.BFN=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/BFN
2018-Jun-19 08:21:54 :: [x86_64] #200 openscada-DAQ.BFN: install check OK
i586: openscada-DAQ.BFN=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/BFN
2018-Jun-19 08:22:27 :: [i586] #200 openscada-DAQ.BFN: install check OK
2018-Jun-19 08:22:39 :: [x86_64] #200 openscada-DAQ.BFN-debuginfo: install check OK
2018-Jun-19 08:23:16 :: [aarch64] #200 openscada-Archive.FSArch: install check OK
2018-Jun-19 08:23:27 :: [x86_64] #200 openscada-DAQ.BlockCalc: install check OK
2018-Jun-19 08:23:39 :: [i586] #200 openscada-DAQ.BFN-debuginfo: install check OK
2018-Jun-19 08:24:08 :: [x86_64] #200 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Jun-19 08:24:25 :: [i586] #200 openscada-DAQ.BlockCalc: install check OK
2018-Jun-19 08:24:49 :: [x86_64] #200 openscada-DAQ.Comedi: install check OK
2018-Jun-19 08:24:52 :: [aarch64] #200 openscada-Archive.FSArch-debuginfo: install check OK
2018-Jun-19 08:25:10 :: [i586] #200 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Jun-19 08:25:30 :: [x86_64] #200 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Jun-19 08:25:52 :: [i586] #200 openscada-DAQ.Comedi: install check OK
2018-Jun-19 08:26:09 :: [x86_64] #200 openscada-DAQ.DAQGate: install check OK
2018-Jun-19 08:26:29 :: [aarch64] #200 openscada-DAQ.AMRDevs: install check OK
2018-Jun-19 08:26:40 :: [i586] #200 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Jun-19 08:26:53 :: [x86_64] #200 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Jun-19 08:27:23 :: [i586] #200 openscada-DAQ.DAQGate: install check OK
2018-Jun-19 08:27:35 :: [x86_64] #200 openscada-DAQ.DCON: install check OK
2018-Jun-19 08:28:09 :: [aarch64] #200 openscada-DAQ.AMRDevs-debuginfo: install check OK
2018-Jun-19 08:28:11 :: [i586] #200 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Jun-19 08:28:18 :: [x86_64] #200 openscada-DAQ.DCON-debuginfo: install check OK
2018-Jun-19 08:28:55 :: [i586] #200 openscada-DAQ.DCON: install check OK
2018-Jun-19 08:28:57 :: [x86_64] #200 openscada-DAQ.JavaLikeCalc: install check OK
aarch64: openscada-DAQ.BFN=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/BFN
2018-Jun-19 08:29:38 :: [x86_64] #200 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Jun-19 08:29:38 :: [aarch64] #200 openscada-DAQ.BFN: install check OK
2018-Jun-19 08:29:41 :: [i586] #200 openscada-DAQ.DCON-debuginfo: install check OK
2018-Jun-19 08:30:17 :: [x86_64] #200 openscada-DAQ.LogicLev: install check OK
2018-Jun-19 08:30:23 :: [i586] #200 openscada-DAQ.DiamondBoards: install check OK
2018-Jun-19 08:30:58 :: [x86_64] #200 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Jun-19 08:31:08 :: [i586] #200 openscada-DAQ.DiamondBoards-debuginfo: install check OK
2018-Jun-19 08:31:14 :: [aarch64] #200 openscada-DAQ.BFN-debuginfo: install check OK
2018-Jun-19 08:31:37 :: [x86_64] #200 openscada-DAQ.MMS: install check OK
2018-Jun-19 08:31:51 :: [i586] #200 openscada-DAQ.ICP_DAS: install check OK
2018-Jun-19 08:32:18 :: [x86_64] #200 openscada-DAQ.MMS-debuginfo: install check OK
2018-Jun-19 08:32:38 :: [i586] #200 openscada-DAQ.ICP_DAS-debuginfo: install check OK
2018-Jun-19 08:32:46 :: [aarch64] #200 openscada-DAQ.BlockCalc: install check OK
2018-Jun-19 08:32:57 :: [x86_64] #200 openscada-DAQ.ModBus: install check OK
2018-Jun-19 08:33:20 :: [i586] #200 openscada-DAQ.JavaLikeCalc: install check OK
2018-Jun-19 08:33:39 :: [x86_64] #200 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Jun-19 08:34:06 :: [i586] #200 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Jun-19 08:34:18 :: [x86_64] #200 openscada-DAQ.OPC_UA: install check OK
2018-Jun-19 08:34:25 :: [aarch64] #200 openscada-DAQ.BlockCalc-debuginfo: install check OK
2018-Jun-19 08:34:49 :: [i586] #200 openscada-DAQ.LogicLev: install check OK
2018-Jun-19 08:35:00 :: [x86_64] #200 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Jun-19 08:35:34 :: [i586] #200 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Jun-19 08:35:39 :: [x86_64] #200 openscada-DAQ.SNMP: install check OK
2018-Jun-19 08:35:58 :: [aarch64] #200 openscada-DAQ.Comedi: install check OK
2018-Jun-19 08:36:17 :: [i586] #200 openscada-DAQ.MMS: install check OK
2018-Jun-19 08:36:23 :: [x86_64] #200 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Jun-19 08:37:02 :: [x86_64] #200 openscada-DAQ.Siemens: install check OK
2018-Jun-19 08:37:02 :: [i586] #200 openscada-DAQ.MMS-debuginfo: install check OK
2018-Jun-19 08:37:36 :: [aarch64] #200 openscada-DAQ.Comedi-debuginfo: install check OK
2018-Jun-19 08:37:44 :: [x86_64] #200 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Jun-19 08:37:44 :: [i586] #200 openscada-DAQ.ModBus: install check OK
2018-Jun-19 08:38:22 :: [x86_64] #200 openscada-DAQ.SoundCard: install check OK
2018-Jun-19 08:38:30 :: [i586] #200 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Jun-19 08:39:06 :: [x86_64] #200 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Jun-19 08:39:10 :: [aarch64] #200 openscada-DAQ.DAQGate: install check OK
2018-Jun-19 08:39:14 :: [i586] #200 openscada-DAQ.OPC_UA: install check OK
2018-Jun-19 08:39:47 :: [x86_64] #200 openscada-DAQ.System: install check OK
2018-Jun-19 08:39:59 :: [i586] #200 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Jun-19 08:40:32 :: [x86_64] #200 openscada-DAQ.System-debuginfo: install check OK
2018-Jun-19 08:40:42 :: [i586] #200 openscada-DAQ.SNMP: install check OK
2018-Jun-19 08:40:53 :: [aarch64] #200 openscada-DAQ.DAQGate-debuginfo: install check OK
2018-Jun-19 08:41:14 :: [x86_64] #200 openscada-DB.DBF: install check OK
2018-Jun-19 08:41:34 :: [i586] #200 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Jun-19 08:41:57 :: [x86_64] #200 openscada-DB.DBF-debuginfo: install check OK
2018-Jun-19 08:42:20 :: [i586] #200 openscada-DAQ.Siemens: install check OK
2018-Jun-19 08:42:29 :: [aarch64] #200 openscada-DAQ.DCON: install check OK
2018-Jun-19 08:42:40 :: [x86_64] #200 openscada-DB.FireBird: install check OK
2018-Jun-19 08:43:08 :: [i586] #200 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Jun-19 08:43:25 :: [x86_64] #200 openscada-DB.FireBird-debuginfo: install check OK
2018-Jun-19 08:43:54 :: [i586] #200 openscada-DAQ.SoundCard: install check OK
2018-Jun-19 08:44:06 :: [x86_64] #200 openscada-DB.MySQL: install check OK
2018-Jun-19 08:44:10 :: [aarch64] #200 openscada-DAQ.DCON-debuginfo: install check OK
2018-Jun-19 08:44:43 :: [i586] #200 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Jun-19 08:44:54 :: [x86_64] #200 openscada-DB.MySQL-debuginfo: install check OK
2018-Jun-19 08:45:29 :: [i586] #200 openscada-DAQ.System: install check OK
2018-Jun-19 08:45:33 :: [x86_64] #200 openscada-DB.PostgreSQL: install check OK
2018-Jun-19 08:45:42 :: [aarch64] #200 openscada-DAQ.JavaLikeCalc: install check OK
2018-Jun-19 08:46:16 :: [x86_64] #200 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Jun-19 08:46:19 :: [i586] #200 openscada-DAQ.System-debuginfo: install check OK
2018-Jun-19 08:46:54 :: [x86_64] #200 openscada-DB.SQLite: install check OK
2018-Jun-19 08:47:01 :: [i586] #200 openscada-DB.DBF: install check OK
2018-Jun-19 08:47:21 :: [aarch64] #200 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2018-Jun-19 08:47:34 :: [x86_64] #200 openscada-DB.SQLite-debuginfo: install check OK
2018-Jun-19 08:47:45 :: [i586] #200 openscada-DB.DBF-debuginfo: install check OK
x86_64: openscada-LibDB.Main=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/LibsDB
2018-Jun-19 08:48:12 :: [x86_64] #200 openscada-LibDB.Main: install check OK
2018-Jun-19 08:48:27 :: [i586] #200 openscada-DB.FireBird: install check OK
x86_64: openscada-LibDB.VCA=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/LibsDB
2018-Jun-19 08:48:52 :: [x86_64] #200 openscada-LibDB.VCA: install check OK
2018-Jun-19 08:48:56 :: [aarch64] #200 openscada-DAQ.LogicLev: install check OK
2018-Jun-19 08:49:13 :: [i586] #200 openscada-DB.FireBird-debuginfo: install check OK
x86_64: openscada-Model.AGLKS=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/AGLKS
2018-Jun-19 08:49:33 :: [x86_64] #200 openscada-Model.AGLKS: install check OK
2018-Jun-19 08:49:55 :: [i586] #200 openscada-DB.MySQL: install check OK
x86_64: openscada-Model.Boiler=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/Boiler
2018-Jun-19 08:50:14 :: [x86_64] #200 openscada-Model.Boiler: install check OK
2018-Jun-19 08:50:41 :: [i586] #200 openscada-DB.MySQL-debuginfo: install check OK
2018-Jun-19 08:50:41 :: [aarch64] #200 openscada-DAQ.LogicLev-debuginfo: install check OK
2018-Jun-19 08:50:53 :: [x86_64] #200 openscada-Protocol.HTTP: install check OK
2018-Jun-19 08:51:27 :: [i586] #200 openscada-DB.PostgreSQL: install check OK
2018-Jun-19 08:51:36 :: [x86_64] #200 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Jun-19 08:52:16 :: [i586] #200 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Jun-19 08:52:16 :: [x86_64] #200 openscada-Protocol.SelfSystem: install check OK
2018-Jun-19 08:52:21 :: [aarch64] #200 openscada-DAQ.MMS: install check OK
2018-Jun-19 08:52:58 :: [x86_64] #200 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Jun-19 08:52:59 :: [i586] #200 openscada-DB.SQLite: install check OK
2018-Jun-19 08:53:38 :: [x86_64] #200 openscada-Protocol.UserProtocol: install check OK
2018-Jun-19 08:53:45 :: [i586] #200 openscada-DB.SQLite-debuginfo: install check OK
2018-Jun-19 08:54:02 :: [aarch64] #200 openscada-DAQ.MMS-debuginfo: install check OK
2018-Jun-19 08:54:20 :: [x86_64] #200 openscada-Protocol.UserProtocol-debuginfo: install check OK
i586: openscada-LibDB.Main=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/LibsDB
2018-Jun-19 08:54:28 :: [i586] #200 openscada-LibDB.Main: install check OK
2018-Jun-19 08:54:59 :: [x86_64] #200 openscada-Special.FLibComplex1: install check OK
i586: openscada-LibDB.VCA=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/LibsDB
2018-Jun-19 08:55:12 :: [i586] #200 openscada-LibDB.VCA: install check OK
2018-Jun-19 08:55:37 :: [aarch64] #200 openscada-DAQ.ModBus: install check OK
2018-Jun-19 08:55:41 :: [x86_64] #200 openscada-Special.FLibComplex1-debuginfo: install check OK
i586: openscada-Model.AGLKS=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/AGLKS
2018-Jun-19 08:56:00 :: [i586] #200 openscada-Model.AGLKS: install check OK
2018-Jun-19 08:56:23 :: [x86_64] #200 openscada-Special.FLibMath: install check OK
i586: openscada-Model.Boiler=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/Boiler
2018-Jun-19 08:56:51 :: [i586] #200 openscada-Model.Boiler: install check OK
2018-Jun-19 08:57:10 :: [x86_64] #200 openscada-Special.FLibMath-debuginfo: install check OK
2018-Jun-19 08:57:17 :: [aarch64] #200 openscada-DAQ.ModBus-debuginfo: install check OK
2018-Jun-19 08:57:39 :: [i586] #200 openscada-Protocol.HTTP: install check OK
2018-Jun-19 08:57:54 :: [x86_64] #200 openscada-Special.FLibSYS: install check OK
2018-Jun-19 08:58:30 :: [i586] #200 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Jun-19 08:58:40 :: [x86_64] #200 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Jun-19 08:58:59 :: [aarch64] #200 openscada-DAQ.OPC_UA: install check OK
2018-Jun-19 08:59:15 :: [i586] #200 openscada-Protocol.SelfSystem: install check OK
2018-Jun-19 08:59:22 :: [x86_64] #200 openscada-Special.SystemTests: install check OK
2018-Jun-19 09:00:02 :: [i586] #200 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Jun-19 09:00:07 :: [x86_64] #200 openscada-Special.SystemTests-debuginfo: install check OK
2018-Jun-19 09:00:44 :: [aarch64] #200 openscada-DAQ.OPC_UA-debuginfo: install check OK
2018-Jun-19 09:00:47 :: [i586] #200 openscada-Protocol.UserProtocol: install check OK
2018-Jun-19 09:00:49 :: [x86_64] #200 openscada-Transport.SSL: install check OK
2018-Jun-19 09:01:35 :: [x86_64] #200 openscada-Transport.SSL-debuginfo: install check OK
2018-Jun-19 09:01:36 :: [i586] #200 openscada-Protocol.UserProtocol-debuginfo: install check OK
2018-Jun-19 09:02:17 :: [x86_64] #200 openscada-Transport.Serial: install check OK
2018-Jun-19 09:02:22 :: [i586] #200 openscada-Special.FLibComplex1: install check OK
2018-Jun-19 09:02:24 :: [aarch64] #200 openscada-DAQ.SNMP: install check OK
2018-Jun-19 09:03:01 :: [x86_64] #200 openscada-Transport.Serial-debuginfo: install check OK
2018-Jun-19 09:03:10 :: [i586] #200 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Jun-19 09:03:43 :: [x86_64] #200 openscada-Transport.Sockets: install check OK
2018-Jun-19 09:03:56 :: [i586] #200 openscada-Special.FLibMath: install check OK
2018-Jun-19 09:04:08 :: [aarch64] #200 openscada-DAQ.SNMP-debuginfo: install check OK
2018-Jun-19 09:04:25 :: [x86_64] #200 openscada-Transport.Sockets-debuginfo: install check OK
2018-Jun-19 09:04:43 :: [i586] #200 openscada-Special.FLibMath-debuginfo: install check OK
2018-Jun-19 09:05:06 :: [x86_64] #200 openscada-UI.QTCfg: install check OK
2018-Jun-19 09:05:26 :: [i586] #200 openscada-Special.FLibSYS: install check OK
2018-Jun-19 09:05:51 :: [aarch64] #200 openscada-DAQ.Siemens: install check OK
2018-Jun-19 09:06:12 :: [i586] #200 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Jun-19 09:06:12 :: [x86_64] #200 openscada-UI.QTCfg-debuginfo: install check OK
2018-Jun-19 09:06:54 :: [x86_64] #200 openscada-UI.QTStarter: install check OK
2018-Jun-19 09:06:55 :: [i586] #200 openscada-Special.SystemTests: install check OK
2018-Jun-19 09:07:31 :: [aarch64] #200 openscada-DAQ.Siemens-debuginfo: install check OK
2018-Jun-19 09:07:40 :: [i586] #200 openscada-Special.SystemTests-debuginfo: install check OK
2018-Jun-19 09:08:08 :: [x86_64] #200 openscada-UI.QTStarter-debuginfo: install check OK
2018-Jun-19 09:08:25 :: [i586] #200 openscada-Transport.SSL: install check OK
2018-Jun-19 09:08:47 :: [x86_64] #200 openscada-UI.VCAEngine: install check OK
2018-Jun-19 09:09:10 :: [i586] #200 openscada-Transport.SSL-debuginfo: install check OK
2018-Jun-19 09:09:11 :: [aarch64] #200 openscada-DAQ.SoundCard: install check OK
2018-Jun-19 09:09:28 :: [x86_64] #200 openscada-UI.VCAEngine-debuginfo: install check OK
2018-Jun-19 09:09:53 :: [i586] #200 openscada-Transport.Serial: install check OK
2018-Jun-19 09:10:08 :: [x86_64] #200 openscada-UI.Vision: install check OK
2018-Jun-19 09:10:38 :: [i586] #200 openscada-Transport.Serial-debuginfo: install check OK
2018-Jun-19 09:10:54 :: [aarch64] #200 openscada-DAQ.SoundCard-debuginfo: install check OK
2018-Jun-19 09:11:13 :: [x86_64] #200 openscada-UI.Vision-debuginfo: install check OK
2018-Jun-19 09:11:20 :: [i586] #200 openscada-Transport.Sockets: install check OK
2018-Jun-19 09:11:52 :: [x86_64] #200 openscada-UI.WebCfg: install check OK
2018-Jun-19 09:12:04 :: [i586] #200 openscada-Transport.Sockets-debuginfo: install check OK
2018-Jun-19 09:12:33 :: [x86_64] #200 openscada-UI.WebCfg-debuginfo: install check OK
2018-Jun-19 09:12:35 :: [aarch64] #200 openscada-DAQ.System: install check OK
2018-Jun-19 09:12:49 :: [i586] #200 openscada-UI.QTCfg: install check OK
2018-Jun-19 09:13:12 :: [x86_64] #200 openscada-UI.WebCfgD: install check OK
2018-Jun-19 09:13:53 :: [x86_64] #200 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Jun-19 09:14:02 :: [i586] #200 openscada-UI.QTCfg-debuginfo: install check OK
2018-Jun-19 09:14:17 :: [aarch64] #200 openscada-DAQ.System-debuginfo: install check OK
2018-Jun-19 09:14:32 :: [x86_64] #200 openscada-UI.WebUser: install check OK
2018-Jun-19 09:14:49 :: [i586] #200 openscada-UI.QTStarter: install check OK
2018-Jun-19 09:15:15 :: [x86_64] #200 openscada-UI.WebUser-debuginfo: install check OK
2018-Jun-19 09:15:53 :: [x86_64] #200 openscada-UI.WebVision: install check OK
2018-Jun-19 09:15:58 :: [aarch64] #200 openscada-DB.DBF: install check OK
2018-Jun-19 09:16:15 :: [i586] #200 openscada-UI.QTStarter-debuginfo: install check OK
2018-Jun-19 09:16:37 :: [x86_64] #200 openscada-UI.WebVision-debuginfo: install check OK
2018-Jun-19 09:16:58 :: [i586] #200 openscada-UI.VCAEngine: install check OK
x86_64: openscada-core=0.9.0-alt1 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Jun-19 09:17:16 :: [x86_64] #200 openscada-core: install check OK
2018-Jun-19 09:17:43 :: [i586] #200 openscada-UI.VCAEngine-debuginfo: install check OK
2018-Jun-19 09:17:57 :: [x86_64] #200 openscada-core-debuginfo: install check OK
2018-Jun-19 09:18:28 :: [i586] #200 openscada-UI.Vision: install check OK
2018-Jun-19 09:18:30 :: [aarch64] #200 openscada-DB.DBF-debuginfo: install check OK
2018-Jun-19 09:18:35 :: [x86_64] #200 openscada-devel: install check OK
x86_64: openscada-docEN=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 09:18:53 :: [x86_64] #200 openscada-docEN: install check OK
x86_64: openscada-docRU=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 09:19:11 :: [x86_64] #200 openscada-docRU: install check OK
x86_64: openscada-docUK=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 09:19:28 :: [x86_64] #200 openscada-docUK: install check OK
2018-Jun-19 09:19:40 :: [i586] #200 openscada-UI.Vision-debuginfo: install check OK
2018-Jun-19 09:20:06 :: [x86_64] #200 openscada-plc: install check OK
2018-Jun-19 09:20:23 :: [i586] #200 openscada-UI.WebCfg: install check OK
2018-Jun-19 09:20:24 :: [aarch64] #200 openscada-DB.FireBird: install check OK
2018-Jun-19 09:20:46 :: [x86_64] #200 openscada-server: install check OK
2018-Jun-19 09:21:08 :: [i586] #200 openscada-UI.WebCfg-debuginfo: install check OK
2018-Jun-19 09:21:26 :: [x86_64] #200 openscada-visStation: install check OK
2018-Jun-19 09:21:50 :: [i586] #200 openscada-UI.WebCfgD: install check OK
2018-Jun-19 09:22:18 :: [aarch64] #200 openscada-DB.FireBird-debuginfo: install check OK
2018-Jun-19 09:22:35 :: [i586] #200 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Jun-19 09:23:17 :: [i586] #200 openscada-UI.WebUser: install check OK
2018-Jun-19 09:24:01 :: [i586] #200 openscada-UI.WebUser-debuginfo: install check OK
2018-Jun-19 09:24:08 :: [aarch64] #200 openscada-DB.MySQL: install check OK
2018-Jun-19 09:24:44 :: [i586] #200 openscada-UI.WebVision: install check OK
2018-Jun-19 09:25:32 :: [i586] #200 openscada-UI.WebVision-debuginfo: install check OK
2018-Jun-19 09:26:10 :: [aarch64] #200 openscada-DB.MySQL-debuginfo: install check OK
i586: openscada-core=0.9.0-alt1 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Jun-19 09:26:15 :: [i586] #200 openscada-core: install check OK
2018-Jun-19 09:27:00 :: [i586] #200 openscada-core-debuginfo: install check OK
2018-Jun-19 09:27:42 :: [i586] #200 openscada-devel: install check OK
i586: openscada-docEN=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 09:28:01 :: [i586] #200 openscada-docEN: install check OK
2018-Jun-19 09:28:03 :: [aarch64] #200 openscada-DB.PostgreSQL: install check OK
i586: openscada-docRU=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 09:28:19 :: [i586] #200 openscada-docRU: install check OK
i586: openscada-docUK=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 09:28:37 :: [i586] #200 openscada-docUK: install check OK
2018-Jun-19 09:29:43 :: [i586] #200 openscada-plc: install check OK
2018-Jun-19 09:30:21 :: [aarch64] #200 openscada-DB.PostgreSQL-debuginfo: install check OK
2018-Jun-19 09:30:29 :: [i586] #200 openscada-server: install check OK
2018-Jun-19 09:31:14 :: [i586] #200 openscada-visStation: install check OK
2018-Jun-19 09:32:03 :: [aarch64] #200 openscada-DB.SQLite: install check OK
2018-Jun-19 09:33:46 :: [aarch64] #200 openscada-DB.SQLite-debuginfo: install check OK
aarch64: openscada-LibDB.Main=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/LibsDB
2018-Jun-19 09:35:26 :: [aarch64] #200 openscada-LibDB.Main: install check OK
aarch64: openscada-LibDB.VCA=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/LibsDB
2018-Jun-19 09:37:20 :: [aarch64] #200 openscada-LibDB.VCA: install check OK
aarch64: openscada-Model.AGLKS=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/AGLKS
2018-Jun-19 09:39:00 :: [aarch64] #200 openscada-Model.AGLKS: install check OK
aarch64: openscada-Model.Boiler=0.9.0-alt1 post-install unowned files:
/usr/share/openscada/Boiler
2018-Jun-19 09:40:42 :: [aarch64] #200 openscada-Model.Boiler: install check OK
2018-Jun-19 09:42:17 :: [aarch64] #200 openscada-Protocol.HTTP: install check OK
2018-Jun-19 09:44:06 :: [aarch64] #200 openscada-Protocol.HTTP-debuginfo: install check OK
2018-Jun-19 09:45:39 :: [aarch64] #200 openscada-Protocol.SelfSystem: install check OK
2018-Jun-19 09:47:23 :: [aarch64] #200 openscada-Protocol.SelfSystem-debuginfo: install check OK
2018-Jun-19 09:48:51 :: [aarch64] #200 openscada-Protocol.UserProtocol: install check OK
2018-Jun-19 09:50:36 :: [aarch64] #200 openscada-Protocol.UserProtocol-debuginfo: install check OK
2018-Jun-19 09:52:11 :: [aarch64] #200 openscada-Special.FLibComplex1: install check OK
2018-Jun-19 09:53:48 :: [aarch64] #200 openscada-Special.FLibComplex1-debuginfo: install check OK
2018-Jun-19 09:55:26 :: [aarch64] #200 openscada-Special.FLibMath: install check OK
2018-Jun-19 09:57:04 :: [aarch64] #200 openscada-Special.FLibMath-debuginfo: install check OK
2018-Jun-19 09:58:36 :: [aarch64] #200 openscada-Special.FLibSYS: install check OK
2018-Jun-19 10:00:20 :: [aarch64] #200 openscada-Special.FLibSYS-debuginfo: install check OK
2018-Jun-19 10:01:58 :: [aarch64] #200 openscada-Special.SystemTests: install check OK
2018-Jun-19 10:03:41 :: [aarch64] #200 openscada-Special.SystemTests-debuginfo: install check OK
2018-Jun-19 10:05:22 :: [aarch64] #200 openscada-Transport.SSL: install check OK
2018-Jun-19 10:07:09 :: [aarch64] #200 openscada-Transport.SSL-debuginfo: install check OK
2018-Jun-19 10:08:52 :: [aarch64] #200 openscada-Transport.Serial: install check OK
2018-Jun-19 10:10:41 :: [aarch64] #200 openscada-Transport.Serial-debuginfo: install check OK
2018-Jun-19 10:12:18 :: [aarch64] #200 openscada-Transport.Sockets: install check OK
2018-Jun-19 10:14:02 :: [aarch64] #200 openscada-Transport.Sockets-debuginfo: install check OK
2018-Jun-19 10:15:48 :: [aarch64] #200 openscada-UI.QTCfg: install check OK
2018-Jun-19 10:18:27 :: [aarch64] #200 openscada-UI.QTCfg-debuginfo: install check OK
2018-Jun-19 10:20:34 :: [aarch64] #200 openscada-UI.QTStarter: install check OK
2018-Jun-19 10:23:16 :: [aarch64] #200 openscada-UI.QTStarter-debuginfo: install check OK
2018-Jun-19 10:25:02 :: [aarch64] #200 openscada-UI.VCAEngine: install check OK
2018-Jun-19 10:26:50 :: [aarch64] #200 openscada-UI.VCAEngine-debuginfo: install check OK
2018-Jun-19 10:28:49 :: [aarch64] #200 openscada-UI.Vision: install check OK
2018-Jun-19 10:31:34 :: [aarch64] #200 openscada-UI.Vision-debuginfo: install check OK
2018-Jun-19 10:33:16 :: [aarch64] #200 openscada-UI.WebCfg: install check OK
2018-Jun-19 10:35:07 :: [aarch64] #200 openscada-UI.WebCfg-debuginfo: install check OK
2018-Jun-19 10:36:48 :: [aarch64] #200 openscada-UI.WebCfgD: install check OK
2018-Jun-19 10:38:42 :: [aarch64] #200 openscada-UI.WebCfgD-debuginfo: install check OK
2018-Jun-19 10:40:29 :: [aarch64] #200 openscada-UI.WebUser: install check OK
2018-Jun-19 10:42:21 :: [aarch64] #200 openscada-UI.WebUser-debuginfo: install check OK
2018-Jun-19 10:44:18 :: [aarch64] #200 openscada-UI.WebVision: install check OK
2018-Jun-19 10:46:11 :: [aarch64] #200 openscada-UI.WebVision-debuginfo: install check OK
aarch64: openscada-core=0.9.0-alt1 post-install unowned files:
/usr/share/man/ru/man1
/usr/share/man/uk
/usr/share/man/uk/man1
2018-Jun-19 10:47:54 :: [aarch64] #200 openscada-core: install check OK
2018-Jun-19 10:49:46 :: [aarch64] #200 openscada-core-debuginfo: install check OK
2018-Jun-19 10:51:29 :: [aarch64] #200 openscada-devel: install check OK
aarch64: openscada-docEN=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 10:52:31 :: [aarch64] #200 openscada-docEN: install check OK
aarch64: openscada-docRU=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 10:53:18 :: [aarch64] #200 openscada-docRU: install check OK
aarch64: openscada-docUK=0.9.0-alt1 post-install unowned files:
/usr/share/openscada
/usr/share/openscada/docs
2018-Jun-19 10:54:09 :: [aarch64] #200 openscada-docUK: install check OK
2018-Jun-19 10:55:50 :: [aarch64] #200 openscada-plc: install check OK
2018-Jun-19 10:57:57 :: [aarch64] #200 openscada-server: install check OK
2018-Jun-19 10:59:47 :: [aarch64] #200 openscada-visStation: install check OK
2018-Jun-19 11:00:00 :: [x86_64-i586] plan: #44 +44 -41 =11465
arepo/x86_64-i586/rpms/i586-openscada-devel-0.9.0-alt1.i586.rpm: BUILDTIME in the future: Tue Jun 19 11:01:56 UTC 2018
sisyphus_check: check-buildtime ERROR: buildtime violation
2018-Jun-19 11:02:01 :: [x86_64-i586] sisyphus_check FAILED
2018-Jun-19 11:02:01 :: [x86_64-i586] build FAILED
2018-Jun-19 11:02:01 :: task #208630 for sisyphus FAILED
More information about the Sisyphus-incominger
mailing list