[#120084] DONE (try 6) opencascade.git=6.7.1-alt1 elmerfem.git=7.0-alt2.svn6764 ...

Fri Jun 20 08:56:13 MSK 2014

http://git.altlinux.org/tasks/archive/done/_117/120084/logs/events.6.2.log

2014-Jun-20 04:26:14 :: task #120084 for sisyphus resumed by real:
#100 build 6.7.1-alt1 from /people/real/packages/opencascade.git
#200 build 7.0-alt2.svn6764 from /people/real/packages/elmerfem.git
#300 build 0.13.0-alt1.git20140521 from /people/real/packages/free-cad.git
#400 build 6.5.2-alt4 from /people/real/packages/wok-tool.git
#500 build 5.3-alt1.svn20140428 from /people/real/packages/netgen.git
#600 build 2.8.5-alt1.svn20140618 from /people/real/packages/gmsh.git
#700 build 1.4-alt4.git20130518 from /people/real/packages/engrid.git
#1000 build 5.3-alt1.svn20140618 from /people/real/packages/ngsolve.git
2014-Jun-20 04:28:15 :: created build repo
2014-Jun-20 04:28:18 :: [x86_64] #100 opencascade.git 6.7.1-alt1: build start
2014-Jun-20 04:28:18 :: [i586] #100 opencascade.git 6.7.1-alt1: build start
2014-Jun-20 04:29:05 :: [x86_64] opencascade.git 6.7.1-alt1: remote: no need to rebuild
2014-Jun-20 04:29:05 :: [x86_64] #100 opencascade.git 6.7.1-alt1: build OK
2014-Jun-20 04:29:05 :: [x86_64] #200 elmerfem.git 7.0-alt2.svn6764: build start
2014-Jun-20 04:29:05 :: [i586] opencascade.git 6.7.1-alt1: remote: no need to rebuild
2014-Jun-20 04:29:06 :: [i586] #100 opencascade.git 6.7.1-alt1: build OK
2014-Jun-20 04:29:06 :: [i586] #200 elmerfem.git 7.0-alt2.svn6764: build start
2014-Jun-20 04:29:28 :: [x86_64] elmerfem.git 7.0-alt2.svn6764: remote: no need to rebuild
2014-Jun-20 04:29:28 :: [x86_64] #200 elmerfem.git 7.0-alt2.svn6764: build OK
2014-Jun-20 04:29:28 :: [x86_64] #300 free-cad.git 0.13.0-alt1.git20140521: build start
2014-Jun-20 04:29:30 :: [i586] elmerfem.git 7.0-alt2.svn6764: remote: no need to rebuild
2014-Jun-20 04:29:30 :: [i586] #200 elmerfem.git 7.0-alt2.svn6764: build OK
2014-Jun-20 04:29:30 :: [i586] #300 free-cad.git 0.13.0-alt1.git20140521: build start
2014-Jun-20 04:29:54 :: [x86_64] free-cad.git 0.13.0-alt1.git20140521: remote: no need to rebuild
2014-Jun-20 04:29:54 :: [x86_64] #300 free-cad.git 0.13.0-alt1.git20140521: build OK
2014-Jun-20 04:29:54 :: [x86_64] #400 wok-tool.git 6.5.2-alt4: build start
2014-Jun-20 04:29:57 :: [i586] free-cad.git 0.13.0-alt1.git20140521: remote: no need to rebuild
2014-Jun-20 04:29:57 :: [i586] #300 free-cad.git 0.13.0-alt1.git20140521: build OK
2014-Jun-20 04:29:57 :: [i586] #400 wok-tool.git 6.5.2-alt4: build start
2014-Jun-20 04:30:13 :: [x86_64] wok-tool.git 6.5.2-alt4: remote: no need to rebuild
2014-Jun-20 04:30:13 :: [x86_64] #400 wok-tool.git 6.5.2-alt4: build OK
2014-Jun-20 04:30:13 :: [x86_64] #500 netgen.git 5.3-alt1.svn20140428: build start
2014-Jun-20 04:30:15 :: [i586] wok-tool.git 6.5.2-alt4: remote: no need to rebuild
2014-Jun-20 04:30:15 :: [i586] #400 wok-tool.git 6.5.2-alt4: build OK
2014-Jun-20 04:30:15 :: [i586] #500 netgen.git 5.3-alt1.svn20140428: build start
2014-Jun-20 04:30:31 :: [x86_64] netgen.git 5.3-alt1.svn20140428: remote: no need to rebuild
2014-Jun-20 04:30:31 :: [x86_64] #500 netgen.git 5.3-alt1.svn20140428: build OK
2014-Jun-20 04:30:31 :: [x86_64] #600 gmsh.git 2.8.5-alt1.svn20140618: build start
2014-Jun-20 04:30:33 :: [i586] netgen.git 5.3-alt1.svn20140428: remote: no need to rebuild
2014-Jun-20 04:30:33 :: [i586] #500 netgen.git 5.3-alt1.svn20140428: build OK
2014-Jun-20 04:30:33 :: [i586] #600 gmsh.git 2.8.5-alt1.svn20140618: build start
2014-Jun-20 04:30:50 :: [x86_64] gmsh.git 2.8.5-alt1.svn20140618: remote: no need to rebuild
2014-Jun-20 04:30:50 :: [x86_64] #600 gmsh.git 2.8.5-alt1.svn20140618: build OK
2014-Jun-20 04:30:50 :: [x86_64] #700 engrid.git 1.4-alt4.git20130518: build start
2014-Jun-20 04:30:55 :: [i586] gmsh.git 2.8.5-alt1.svn20140618: remote: no need to rebuild
2014-Jun-20 04:30:55 :: [i586] #600 gmsh.git 2.8.5-alt1.svn20140618: build OK
2014-Jun-20 04:30:55 :: [i586] #700 engrid.git 1.4-alt4.git20130518: build start
2014-Jun-20 04:31:08 :: [x86_64] engrid.git 1.4-alt4.git20130518: remote: no need to rebuild
2014-Jun-20 04:31:08 :: [x86_64] #700 engrid.git 1.4-alt4.git20130518: build OK
2014-Jun-20 04:31:08 :: [x86_64] #1000 ngsolve.git 5.3-alt1.svn20140618: build start
2014-Jun-20 04:31:13 :: [i586] engrid.git 1.4-alt4.git20130518: remote: no need to rebuild
2014-Jun-20 04:31:13 :: [i586] #700 engrid.git 1.4-alt4.git20130518: build OK
2014-Jun-20 04:31:13 :: [i586] #1000 ngsolve.git 5.3-alt1.svn20140618: build start
2014-Jun-20 04:31:26 :: [x86_64] ngsolve.git 5.3-alt1.svn20140618: remote: no need to rebuild
2014-Jun-20 04:31:27 :: [x86_64] #1000 ngsolve.git 5.3-alt1.svn20140618: build OK
2014-Jun-20 04:31:30 :: [i586] ngsolve.git 5.3-alt1.svn20140618: remote: no need to rebuild
2014-Jun-20 04:31:30 :: [i586] #1000 ngsolve.git 5.3-alt1.svn20140618: build OK
2014-Jun-20 04:33:02 :: build check OK
warning (#300): free-cad-thumbnailer-0.13.0-alt1.git20140521.i586.rpm should be .noarch.rpm
2014-Jun-20 04:36:13 :: noarch check OK
2014-Jun-20 04:36:15 :: plan: src +8 -8 =15157, i586 +46 -41 =28388, noarch +8 -8 =13602, x86_64 +46 -41 =28306
2014-Jun-20 04:36:15 :: version check OK
2014-Jun-20 04:37:48 :: generated apt indices
2014-Jun-20 04:38:25 :: created next repo
2014-Jun-20 04:38:37 :: dependencies check OK
2014-Jun-20 04:41:13 :: ELF symbols check OK
2014-Jun-20 04:41:41 :: [i586] #200 ElmerGUI: no need to repeat, install check SKIPPED
2014-Jun-20 04:41:44 :: [x86_64] #200 ElmerGUI: no need to repeat, install check SKIPPED
2014-Jun-20 04:41:44 :: [i586] #200 ElmerGUI-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:41:46 :: [x86_64] #200 ElmerGUI-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:41:47 :: [i586] #200 ElmerGUIlogger: no need to repeat, install check SKIPPED
2014-Jun-20 04:41:48 :: [x86_64] #200 ElmerGUIlogger: no need to repeat, install check SKIPPED
2014-Jun-20 04:41:49 :: [i586] #200 ElmerGUIlogger-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:41:50 :: [x86_64] #200 ElmerGUIlogger-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:41:51 :: [i586] #200 elmerfem: no need to repeat, install check SKIPPED
2014-Jun-20 04:41:53 :: [x86_64] #200 elmerfem: no need to repeat, install check SKIPPED
2014-Jun-20 04:41:54 :: [i586] #200 elmerfem-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:41:55 :: [x86_64] #200 elmerfem-debuginfo: no need to repeat, install check SKIPPED
	i586: engrid=1.4-alt4.git20130518 post-install unowned files:
/usr/share/blender
/usr/share/blender/scripts
/usr/share/blender/scripts/blender
2014-Jun-20 04:41:56 :: [i586] #700 engrid: no need to repeat, install check SKIPPED
	x86_64: engrid=1.4-alt4.git20130518 post-install unowned files:
/usr/share/blender
/usr/share/blender/scripts
/usr/share/blender/scripts/blender
2014-Jun-20 04:41:58 :: [x86_64] #700 engrid: no need to repeat, install check SKIPPED
2014-Jun-20 04:41:59 :: [i586] #700 engrid-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:00 :: [x86_64] #700 engrid-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:01 :: [i586] #700 engrid-docs: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:03 :: [x86_64] #700 engrid-docs: no need to repeat, install check SKIPPED
warning [i586]: free-cad=1:0.13.0-alt1.git20140521: circular dependencies on libfree-cad=1:0.13.0-alt1.git20140521
2014-Jun-20 04:42:03 :: [i586] #300 free-cad: no need to repeat, install check SKIPPED
warning [x86_64]: free-cad=1:0.13.0-alt1.git20140521: circular dependencies on libfree-cad=1:0.13.0-alt1.git20140521
2014-Jun-20 04:42:05 :: [x86_64] #300 free-cad: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:06 :: [i586] #300 free-cad-debuginfo: no need to repeat, install check SKIPPED
	i586: free-cad-docs=1:0.13.0-alt1.git20140521 post-install unowned files:
/usr/lib/freecad
2014-Jun-20 04:42:08 :: [i586] #300 free-cad-docs: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:08 :: [x86_64] #300 free-cad-debuginfo: no need to repeat, install check SKIPPED
	x86_64: free-cad-docs=1:0.13.0-alt1.git20140521 post-install unowned files:
/usr/lib64/freecad
2014-Jun-20 04:42:10 :: [x86_64] #300 free-cad-docs: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:11 :: [i586] #300 free-cad-qt4-designer-plugin: no need to repeat, install check SKIPPED
	x86_64: free-cad-qt4-designer-plugin=1:0.13.0-alt1.git20140521 post-install unowned files:
/usr/lib/qt4
/usr/lib/qt4/plugins
/usr/lib/qt4/plugins/designer
2014-Jun-20 04:42:12 :: [x86_64] #300 free-cad-qt4-designer-plugin: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:13 :: [i586] #300 free-cad-qt4-designer-plugin-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:15 :: [x86_64] #300 free-cad-qt4-designer-plugin-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:15 :: [i586] #300 free-cad-thumbnailer: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:17 :: [x86_64] #300 free-cad-thumbnailer: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:17 :: [i586] #600 gmsh: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:20 :: [x86_64] #600 gmsh: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:20 :: [i586] #600 gmsh-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:22 :: [x86_64] #600 gmsh-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:22 :: [i586] #600 gmsh-demos: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:25 :: [i586] #200 libelmerfem: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:25 :: [x86_64] #600 gmsh-demos: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:27 :: [i586] #200 libelmerfem-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:27 :: [x86_64] #200 libelmerfem: no need to repeat, install check SKIPPED
	i586: libelmerfem-devel=7.0-alt2.svn6764 post-install unowned files:
/usr/lib/elmersolver
2014-Jun-20 04:42:29 :: [i586] #200 libelmerfem-devel: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:29 :: [x86_64] #200 libelmerfem-debuginfo: no need to repeat, install check SKIPPED
warning [i586]: libfree-cad=1:0.13.0-alt1.git20140521: circular dependencies on free-cad=1:0.13.0-alt1.git20140521
2014-Jun-20 04:42:31 :: [i586] #300 libfree-cad: no need to repeat, install check SKIPPED
	x86_64: libelmerfem-devel=7.0-alt2.svn6764 post-install unowned files:
/usr/lib64/elmersolver
2014-Jun-20 04:42:31 :: [x86_64] #200 libelmerfem-devel: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:34 :: [i586] #300 libfree-cad-debuginfo: no need to repeat, install check SKIPPED
warning [x86_64]: libfree-cad=1:0.13.0-alt1.git20140521: circular dependencies on free-cad=1:0.13.0-alt1.git20140521
2014-Jun-20 04:42:35 :: [x86_64] #300 libfree-cad: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:36 :: [i586] #600 libgmsh: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:37 :: [x86_64] #300 libfree-cad-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:38 :: [i586] #600 libgmsh-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:39 :: [x86_64] #600 libgmsh: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:41 :: [i586] #600 libgmsh-devel: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:41 :: [x86_64] #600 libgmsh-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:43 :: [i586] #500 libnetgen: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:44 :: [x86_64] #600 libgmsh-devel: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:45 :: [i586] #500 libnetgen-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:46 :: [x86_64] #500 libnetgen: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:47 :: [i586] #500 libnetgen-devel: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:48 :: [x86_64] #500 libnetgen-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:50 :: [i586] #1000 libngsolve: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:50 :: [x86_64] #500 libnetgen-devel: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:52 :: [i586] #1000 libngsolve-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:52 :: [x86_64] #1000 libngsolve: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:54 :: [i586] #1000 libngsolve-devel: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:55 :: [x86_64] #1000 libngsolve-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:57 :: [i586] #100 libopencascade: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:57 :: [x86_64] #1000 libngsolve-devel: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:59 :: [i586] #100 libopencascade-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:42:59 :: [x86_64] #100 libopencascade: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:01 :: [i586] #100 libopencascade-devel: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:02 :: [x86_64] #100 libopencascade-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:04 :: [i586] #400 libwok-tool: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:04 :: [x86_64] #100 libopencascade-devel: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:06 :: [i586] #400 libwok-tool-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:06 :: [x86_64] #400 libwok-tool: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:08 :: [i586] #400 libwok-tool-devel: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:09 :: [x86_64] #400 libwok-tool-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:10 :: [i586] #500 netgen: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:11 :: [x86_64] #400 libwok-tool-devel: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:12 :: [i586] #500 netgen-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:13 :: [x86_64] #500 netgen: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:14 :: [i586] #500 netgen-demo: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:15 :: [x86_64] #500 netgen-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:16 :: [i586] #500 netgen-doc: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:17 :: [x86_64] #500 netgen-demo: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:19 :: [i586] #500 netgen-tutorials: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:19 :: [x86_64] #500 netgen-doc: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:21 :: [i586] #1000 ngsolve: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:21 :: [x86_64] #500 netgen-tutorials: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:23 :: [i586] #1000 ngsolve-demos: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:25 :: [x86_64] #1000 ngsolve: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:25 :: [i586] #1000 ngsolve-demos-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:27 :: [x86_64] #1000 ngsolve-demos: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:27 :: [i586] #100 opencascade: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:29 :: [x86_64] #1000 ngsolve-demos-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:29 :: [i586] #100 opencascade-common: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:31 :: [x86_64] #100 opencascade: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:32 :: [i586] #100 opencascade-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:33 :: [x86_64] #100 opencascade-common: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:34 :: [i586] #600 python-module-gmsh: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:36 :: [x86_64] #100 opencascade-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:37 :: [i586] #600 python-module-gmsh-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:38 :: [x86_64] #600 python-module-gmsh: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:38 :: [i586] #400 wok-tool: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:40 :: [x86_64] #600 python-module-gmsh-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:41 :: [i586] #400 wok-tool-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:43 :: [x86_64] #400 wok-tool: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:43 :: [i586] #400 wok-tool-doc: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:45 :: [x86_64] #400 wok-tool-debuginfo: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:47 :: [x86_64] #400 wok-tool-doc: no need to repeat, install check SKIPPED
2014-Jun-20 04:43:49 :: [x86_64-i586] plan: #0 +16 -13 =9524
2014-Jun-20 04:44:06 :: [x86_64-i586] generated apt indices
2014-Jun-20 04:44:10 :: [x86_64-i586] created next repo
2014-Jun-20 04:44:17 :: [x86_64-i586] dependencies check OK
2014-Jun-20 04:44:22 :: gears inheritance check OK
2014-Jun-20 04:44:23 :: srpm inheritance check OK
girar-check-perms: access to opencascade ALLOWED for real: project leader
girar-check-perms: access to elmerfem ALLOWED for real: project leader
girar-check-perms: access to free-cad ALLOWED for real: project leader
girar-check-perms: access to wok-tool ALLOWED for real: project leader
girar-check-perms: access to netgen ALLOWED for real: project leader
girar-check-perms: access to gmsh ALLOWED for real: project leader
girar-check-perms: access to engrid ALLOWED for real: project leader
girar-check-perms: access to ngsolve ALLOWED for real: project leader
2014-Jun-20 04:44:23 :: acl check OK
2014-Jun-20 04:44:44 :: created contents_index files
2014-Jun-20 04:44:56 :: created hash files: i586 noarch src x86_64-i586 x86_64
2014-Jun-20 04:45:01 :: task #120084 for sisyphus TESTED
2014-Jun-20 04:45:02 :: task is ready for commit
2014-Jun-20 04:50:02 :: repo clone OK
2014-Jun-20 04:50:28 :: packages update OK
2014-Jun-20 04:50:44 :: [i586 x86_64 noarch] update OK
2014-Jun-20 04:50:50 :: [x86_64-i586] update OK
2014-Jun-20 04:50:50 :: repo update OK
2014-Jun-20 04:51:46 :: repo save OK
2014-Jun-20 04:52:40 :: updated /gears/e/elmerfem.git branch `sisyphus'
2014-Jun-20 04:53:11 :: updated /gears/e/engrid.git branch `sisyphus'
2014-Jun-20 04:53:30 :: updated /gears/f/free-cad.git branch `sisyphus'
2014-Jun-20 04:54:04 :: updated /gears/g/gmsh.git branch `sisyphus'
2014-Jun-20 04:54:16 :: updated /gears/n/netgen.git branch `sisyphus'
2014-Jun-20 04:54:19 :: updated /gears/n/ngsolve.git branch `sisyphus'
2014-Jun-20 04:55:20 :: updated /gears/o/opencascade.git branch `sisyphus'
2014-Jun-20 04:55:56 :: updated /gears/w/wok-tool.git branch `sisyphus'
2014-Jun-20 04:56:11 :: gears update OK
2014-Jun-20 04:56:11 :: task #120084 for sisyphus DONE