[#104355] 5.1 DONE openscada.git=0.8.0.8-alt0.M51.1

Girar pender robot girar-builder at altlinux.org
Wed Sep 18 01:19:34 MSK 2013 

http://git.altlinux.org/var/lib/girar/tasks/archive/done/_101/104355/logs/events.1.1.log

2013-Sep-17 19:37:54 :: task #104355 for 5.1 started by rom_as:
#100 build 0.8.0.8-alt0.M51.1 from /people/rom_as/packages/openscada.git
2013-Sep-17 19:37:56 :: [x86_64] #100 openscada.git 0.8.0.8-alt0.M51.1: build start
2013-Sep-17 19:37:56 :: [i586] #100 openscada.git 0.8.0.8-alt0.M51.1: build start
2013-Sep-17 19:54:30 :: [x86_64] #100 openscada.git 0.8.0.8-alt0.M51.1: build OK
2013-Sep-17 19:56:05 :: [i586] #100 openscada.git 0.8.0.8-alt0.M51.1: build OK
2013-Sep-17 19:56:36 :: build check OK
2013-Sep-17 19:57:03 :: noarch check OK
2013-Sep-17 19:57:05 :: plan: src +1 -1 =9778, i586 +44 -44 =12212, noarch +8 -8 =8277, x86_64 +42 -42 =12052
2013-Sep-17 19:57:05 :: version check OK
2013-Sep-17 20:28:54 :: generated apt indices
2013-Sep-17 20:29:07 :: created next repo
2013-Sep-17 20:29:10 :: dependencies check OK
2013-Sep-17 20:58:52 :: ELF symbols check OK
2013-Sep-17 20:59:28 :: [x86_64] #100 openscada: install check OK
2013-Sep-17 20:59:36 :: [i586] #100 openscada: install check OK
	x86_64: openscada-Archive.DBArch=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 20:59:41 :: [x86_64] #100 openscada-Archive.DBArch: install check OK
	i586: openscada-Archive.DBArch=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 20:59:53 :: [i586] #100 openscada-Archive.DBArch: install check OK
	x86_64: openscada-Archive.FSArch=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 20:59:55 :: [x86_64] #100 openscada-Archive.FSArch: install check OK
	i586: openscada-Archive.FSArch=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
	x86_64: openscada-DAQ.BFN=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:00:08 :: [i586] #100 openscada-Archive.FSArch: install check OK
2013-Sep-17 21:00:08 :: [x86_64] #100 openscada-DAQ.BFN: install check OK
	x86_64: openscada-DAQ.BlockCalc=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:00:21 :: [x86_64] #100 openscada-DAQ.BlockCalc: install check OK
	i586: openscada-DAQ.BFN=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:00:23 :: [i586] #100 openscada-DAQ.BFN: install check OK
	x86_64: openscada-DAQ.DAQGate=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:00:34 :: [x86_64] #100 openscada-DAQ.DAQGate: install check OK
	i586: openscada-DAQ.BlockCalc=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:00:37 :: [i586] #100 openscada-DAQ.BlockCalc: install check OK
	x86_64: openscada-DAQ.DCON=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:00:48 :: [x86_64] #100 openscada-DAQ.DCON: install check OK
	i586: openscada-DAQ.DAQGate=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:00:52 :: [i586] #100 openscada-DAQ.DAQGate: install check OK
	x86_64: openscada-DAQ.JavaLikeCalc=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:01:01 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc: install check OK
	i586: openscada-DAQ.DCON=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:01:06 :: [i586] #100 openscada-DAQ.DCON: install check OK
	x86_64: openscada-DAQ.LogicLev=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:01:14 :: [x86_64] #100 openscada-DAQ.LogicLev: install check OK
	i586: openscada-DAQ.DiamondBoards=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:01:21 :: [i586] #100 openscada-DAQ.DiamondBoards: install check OK
	x86_64: openscada-DAQ.ModBus=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:01:27 :: [x86_64] #100 openscada-DAQ.ModBus: install check OK
	i586: openscada-DAQ.ICP_DAS=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:01:36 :: [i586] #100 openscada-DAQ.ICP_DAS: install check OK
	x86_64: openscada-DAQ.OPC_UA=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:01:41 :: [x86_64] #100 openscada-DAQ.OPC_UA: install check OK
	i586: openscada-DAQ.JavaLikeCalc=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:01:50 :: [i586] #100 openscada-DAQ.JavaLikeCalc: install check OK
	x86_64: openscada-DAQ.SNMP=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:01:54 :: [x86_64] #100 openscada-DAQ.SNMP: install check OK
	i586: openscada-DAQ.LogicLev=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:02:05 :: [i586] #100 openscada-DAQ.LogicLev: install check OK
	x86_64: openscada-DAQ.Siemens=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:02:07 :: [x86_64] #100 openscada-DAQ.Siemens: install check OK
	i586: openscada-DAQ.ModBus=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:02:19 :: [i586] #100 openscada-DAQ.ModBus: install check OK
	x86_64: openscada-DAQ.SoundCard=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:02:21 :: [x86_64] #100 openscada-DAQ.SoundCard: install check OK
	i586: openscada-DAQ.OPC_UA=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:02:34 :: [i586] #100 openscada-DAQ.OPC_UA: install check OK
	x86_64: openscada-DAQ.System=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:02:34 :: [x86_64] #100 openscada-DAQ.System: install check OK
	x86_64: openscada-DB.DBF=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
	i586: openscada-DAQ.SNMP=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:02:48 :: [x86_64] #100 openscada-DB.DBF: install check OK
2013-Sep-17 21:02:48 :: [i586] #100 openscada-DAQ.SNMP: install check OK
	x86_64: openscada-DB.FireBird=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:03:01 :: [x86_64] #100 openscada-DB.FireBird: install check OK
	i586: openscada-DAQ.Siemens=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:03:03 :: [i586] #100 openscada-DAQ.Siemens: install check OK
	x86_64: openscada-DB.MySQL=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:03:15 :: [x86_64] #100 openscada-DB.MySQL: install check OK
	i586: openscada-DAQ.SoundCard=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:03:18 :: [i586] #100 openscada-DAQ.SoundCard: install check OK
	x86_64: openscada-DB.PostgreSQL=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:03:28 :: [x86_64] #100 openscada-DB.PostgreSQL: install check OK
	i586: openscada-DAQ.System=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:03:32 :: [i586] #100 openscada-DAQ.System: install check OK
	x86_64: openscada-DB.SQLite=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:03:41 :: [x86_64] #100 openscada-DB.SQLite: install check OK
	i586: openscada-DB.DBF=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:03:47 :: [i586] #100 openscada-DB.DBF: install check OK
	x86_64: openscada-LibDB.Main=0.8.0.8-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2013-Sep-17 21:03:56 :: [x86_64] #100 openscada-LibDB.Main: install check OK
	i586: openscada-DB.FireBird=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:04:01 :: [i586] #100 openscada-DB.FireBird: install check OK
	x86_64: openscada-LibDB.VCA=0.8.0.8-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2013-Sep-17 21:04:12 :: [x86_64] #100 openscada-LibDB.VCA: install check OK
	i586: openscada-DB.MySQL=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:04:16 :: [i586] #100 openscada-DB.MySQL: install check OK
	x86_64: openscada-Model.AGLKS=0.8.0.8-alt0.M51.1 post-install unowned files:
/var/spool/openscada/AGLKS
2013-Sep-17 21:04:28 :: [x86_64] #100 openscada-Model.AGLKS: install check OK
	i586: openscada-DB.PostgreSQL=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:04:31 :: [i586] #100 openscada-DB.PostgreSQL: install check OK
	x86_64: openscada-Model.Boiler=0.8.0.8-alt0.M51.1 post-install unowned files:
/var/spool/openscada/Boiler
2013-Sep-17 21:04:43 :: [x86_64] #100 openscada-Model.Boiler: install check OK
	i586: openscada-DB.SQLite=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:04:45 :: [i586] #100 openscada-DB.SQLite: install check OK
	x86_64: openscada-Protocol.HTTP=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:04:57 :: [x86_64] #100 openscada-Protocol.HTTP: install check OK
	i586: openscada-LibDB.Main=0.8.0.8-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2013-Sep-17 21:05:00 :: [i586] #100 openscada-LibDB.Main: install check OK
	x86_64: openscada-Protocol.SelfSystem=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:05:10 :: [x86_64] #100 openscada-Protocol.SelfSystem: install check OK
	i586: openscada-LibDB.VCA=0.8.0.8-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2013-Sep-17 21:05:14 :: [i586] #100 openscada-LibDB.VCA: install check OK
	x86_64: openscada-Protocol.UserProtocol=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:05:24 :: [x86_64] #100 openscada-Protocol.UserProtocol: install check OK
	i586: openscada-Model.AGLKS=0.8.0.8-alt0.M51.1 post-install unowned files:
/var/spool/openscada/AGLKS
2013-Sep-17 21:05:32 :: [i586] #100 openscada-Model.AGLKS: install check OK
	x86_64: openscada-Special.FLibComplex1=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:05:37 :: [x86_64] #100 openscada-Special.FLibComplex1: install check OK
	i586: openscada-Model.Boiler=0.8.0.8-alt0.M51.1 post-install unowned files:
/var/spool/openscada/Boiler
2013-Sep-17 21:05:49 :: [i586] #100 openscada-Model.Boiler: install check OK
	x86_64: openscada-Special.FLibMath=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:05:50 :: [x86_64] #100 openscada-Special.FLibMath: install check OK
	x86_64: openscada-Special.FLibSYS=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
	i586: openscada-Protocol.HTTP=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:06:04 :: [x86_64] #100 openscada-Special.FLibSYS: install check OK
2013-Sep-17 21:06:04 :: [i586] #100 openscada-Protocol.HTTP: install check OK
	x86_64: openscada-Special.SystemTests=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:06:17 :: [x86_64] #100 openscada-Special.SystemTests: install check OK
	i586: openscada-Protocol.SelfSystem=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:06:19 :: [i586] #100 openscada-Protocol.SelfSystem: install check OK
	x86_64: openscada-Transport.SSL=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:06:31 :: [x86_64] #100 openscada-Transport.SSL: install check OK
	i586: openscada-Protocol.UserProtocol=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:06:33 :: [i586] #100 openscada-Protocol.UserProtocol: install check OK
	x86_64: openscada-Transport.Serial=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:06:44 :: [x86_64] #100 openscada-Transport.Serial: install check OK
	i586: openscada-Special.FLibComplex1=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:06:48 :: [i586] #100 openscada-Special.FLibComplex1: install check OK
	x86_64: openscada-Transport.Sockets=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:06:58 :: [x86_64] #100 openscada-Transport.Sockets: install check OK
	i586: openscada-Special.FLibMath=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:07:02 :: [i586] #100 openscada-Special.FLibMath: install check OK
2013-Sep-17 21:07:12 :: [x86_64] #100 openscada-UI.QTCfg: install check OK
	i586: openscada-Special.FLibSYS=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:07:17 :: [i586] #100 openscada-Special.FLibSYS: install check OK
	x86_64: openscada-UI.QTStarter=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:07:27 :: [x86_64] #100 openscada-UI.QTStarter: install check OK
	i586: openscada-Special.SystemTests=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:07:32 :: [i586] #100 openscada-Special.SystemTests: install check OK
	x86_64: openscada-UI.VCAEngine=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Sep-17 21:07:40 :: [x86_64] #100 openscada-UI.VCAEngine: install check OK
	i586: openscada-Transport.SSL=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:07:46 :: [i586] #100 openscada-Transport.SSL: install check OK
2013-Sep-17 21:07:57 :: [x86_64] #100 openscada-UI.Vision: install check OK
	i586: openscada-Transport.Serial=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:08:03 :: [i586] #100 openscada-Transport.Serial: install check OK
2013-Sep-17 21:08:12 :: [x86_64] #100 openscada-UI.WebCfg: install check OK
	i586: openscada-Transport.Sockets=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:08:19 :: [i586] #100 openscada-Transport.Sockets: install check OK
2013-Sep-17 21:08:28 :: [x86_64] #100 openscada-UI.WebCfgD: install check OK
2013-Sep-17 21:08:38 :: [i586] #100 openscada-UI.QTCfg: install check OK
2013-Sep-17 21:08:46 :: [x86_64] #100 openscada-UI.WebUser: install check OK
	i586: openscada-UI.QTStarter=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:08:58 :: [i586] #100 openscada-UI.QTStarter: install check OK
2013-Sep-17 21:09:02 :: [x86_64] #100 openscada-UI.WebVision: install check OK
	i586: openscada-UI.VCAEngine=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Sep-17 21:09:16 :: [i586] #100 openscada-UI.VCAEngine: install check OK
	x86_64: openscada-core=0.8.0.8-alt0.M51.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2013-Sep-17 21:09:23 :: [x86_64] #100 openscada-core: install check OK
	x86_64: openscada-devel=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/include/openscada
2013-Sep-17 21:09:48 :: [x86_64] #100 openscada-devel: install check OK
2013-Sep-17 21:09:49 :: [i586] #100 openscada-UI.Vision: install check OK
2013-Sep-17 21:10:07 :: [x86_64] #100 openscada-docEN: install check OK
2013-Sep-17 21:10:08 :: [i586] #100 openscada-UI.WebCfg: install check OK
2013-Sep-17 21:10:25 :: [i586] #100 openscada-UI.WebCfgD: install check OK
2013-Sep-17 21:10:27 :: [x86_64] #100 openscada-docRU: install check OK
2013-Sep-17 21:10:41 :: [x86_64] #100 openscada-docUK: install check OK
2013-Sep-17 21:10:44 :: [i586] #100 openscada-UI.WebUser: install check OK
2013-Sep-17 21:10:58 :: [x86_64] #100 openscada-plc: install check OK
2013-Sep-17 21:11:01 :: [i586] #100 openscada-UI.WebVision: install check OK
	i586: openscada-core=0.8.0.8-alt0.M51.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2013-Sep-17 21:11:19 :: [i586] #100 openscada-core: install check OK
2013-Sep-17 21:11:20 :: [x86_64] #100 openscada-server: install check OK
	i586: openscada-devel=0.8.0.8-alt0.M51.1 post-install unowned files:
/usr/include/openscada
2013-Sep-17 21:11:37 :: [i586] #100 openscada-devel: install check OK
2013-Sep-17 21:11:41 :: [x86_64] #100 openscada-visStation: install check OK
2013-Sep-17 21:11:58 :: [i586] #100 openscada-docEN: install check OK
2013-Sep-17 21:12:19 :: [i586] #100 openscada-docRU: install check OK
2013-Sep-17 21:12:32 :: [i586] #100 openscada-docUK: install check OK
2013-Sep-17 21:12:50 :: [i586] #100 openscada-plc: install check OK
2013-Sep-17 21:13:11 :: [i586] #100 openscada-server: install check OK
2013-Sep-17 21:13:31 :: [i586] #100 openscada-visStation: install check OK
2013-Sep-17 21:13:37 :: gears inheritance check OK
2013-Sep-17 21:13:38 :: srpm inheritance check OK
girar-check-perms: access to openscada ALLOWED for rom_as: project leader
2013-Sep-17 21:13:38 :: acl check OK
2013-Sep-17 21:14:51 :: created contents_index files
2013-Sep-17 21:15:41 :: task #104355 for 5.1 TESTED
2013-Sep-17 21:15:45 :: task is ready for commit
2013-Sep-17 21:17:02 :: repo clone OK
2013-Sep-17 21:17:24 :: packages update OK
2013-Sep-17 21:17:29 :: [i586 x86_64 noarch] update OK
2013-Sep-17 21:17:31 :: repo update OK
2013-Sep-17 21:17:37 :: repo save OK
2013-Sep-17 21:17:49 :: updated /gears/o/openscada.git branch `5.1'
2013-Sep-17 21:19:30 :: gears update OK
2013-Sep-17 21:19:30 :: task #104355 for 5.1 DONE

More information about the Sisyphus-incominger mailing list