[#97175] 5.1 DONE openscada.git=0.8.0.6-alt0.M51.1

Girar Builder robot girar-builder at altlinux.org
Sun May 12 18:45:59 MSK 2013 

http://git.altlinux.org/tasks/archive/done/_94/97175/logs/events.1.1.log

2013-May-12 14:10:59 :: task #97175 for 5.1 started by rom_as:
#100 build 0.8.0.6-alt0.M51.1 from /people/rom_as/packages/openscada.git
2013-May-12 14:11:00 :: [x86_64] #100 openscada.git 0.8.0.6-alt0.M51.1: build start
2013-May-12 14:11:00 :: [i586] #100 openscada.git 0.8.0.6-alt0.M51.1: build start
2013-May-12 14:25:54 :: [x86_64] #100 openscada.git 0.8.0.6-alt0.M51.1: build OK
2013-May-12 14:27:36 :: [i586] #100 openscada.git 0.8.0.6-alt0.M51.1: build OK
2013-May-12 14:28:11 :: build check OK
2013-May-12 14:28:36 :: noarch check OK
2013-May-12 14:28:37 :: plan: src +1 -1 =9775, i586 +44 -44 =12207, noarch +8 -8 =8273, x86_64 +42 -42 =12047
2013-May-12 14:28:37 :: version check OK
2013-May-12 14:31:08 :: created next repo
2013-May-12 14:31:12 :: dependencies check OK
2013-May-12 14:34:03 :: ELF symbols check OK
2013-May-12 14:34:29 :: [x86_64] #100 openscada: install check OK
2013-May-12 14:34:30 :: [i586] #100 openscada: install check OK
	x86_64: openscada-Archive.DBArch=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:34:40 :: [x86_64] #100 openscada-Archive.DBArch: install check OK
	i586: openscada-Archive.DBArch=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:34:42 :: [i586] #100 openscada-Archive.DBArch: install check OK
	x86_64: openscada-Archive.FSArch=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:34:52 :: [x86_64] #100 openscada-Archive.FSArch: install check OK
	i586: openscada-Archive.FSArch=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:34:54 :: [i586] #100 openscada-Archive.FSArch: install check OK
	x86_64: openscada-DAQ.BFN=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:35:03 :: [x86_64] #100 openscada-DAQ.BFN: install check OK
	i586: openscada-DAQ.BFN=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:35:05 :: [i586] #100 openscada-DAQ.BFN: install check OK
	x86_64: openscada-DAQ.BlockCalc=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:35:15 :: [x86_64] #100 openscada-DAQ.BlockCalc: install check OK
	i586: openscada-DAQ.BlockCalc=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:35:17 :: [i586] #100 openscada-DAQ.BlockCalc: install check OK
	x86_64: openscada-DAQ.DAQGate=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:35:26 :: [x86_64] #100 openscada-DAQ.DAQGate: install check OK
	i586: openscada-DAQ.DAQGate=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:35:29 :: [i586] #100 openscada-DAQ.DAQGate: install check OK
	x86_64: openscada-DAQ.DCON=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:35:38 :: [x86_64] #100 openscada-DAQ.DCON: install check OK
	i586: openscada-DAQ.DCON=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:35:41 :: [i586] #100 openscada-DAQ.DCON: install check OK
	x86_64: openscada-DAQ.JavaLikeCalc=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:35:49 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc: install check OK
	i586: openscada-DAQ.DiamondBoards=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:35:53 :: [i586] #100 openscada-DAQ.DiamondBoards: install check OK
	x86_64: openscada-DAQ.LogicLev=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:36:01 :: [x86_64] #100 openscada-DAQ.LogicLev: install check OK
	i586: openscada-DAQ.ICP_DAS=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:36:05 :: [i586] #100 openscada-DAQ.ICP_DAS: install check OK
	x86_64: openscada-DAQ.ModBus=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:36:12 :: [x86_64] #100 openscada-DAQ.ModBus: install check OK
	i586: openscada-DAQ.JavaLikeCalc=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:36:16 :: [i586] #100 openscada-DAQ.JavaLikeCalc: install check OK
	x86_64: openscada-DAQ.OPC_UA=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:36:24 :: [x86_64] #100 openscada-DAQ.OPC_UA: install check OK
	i586: openscada-DAQ.LogicLev=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:36:28 :: [i586] #100 openscada-DAQ.LogicLev: install check OK
	x86_64: openscada-DAQ.SNMP=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:36:36 :: [x86_64] #100 openscada-DAQ.SNMP: install check OK
	i586: openscada-DAQ.ModBus=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:36:40 :: [i586] #100 openscada-DAQ.ModBus: install check OK
	x86_64: openscada-DAQ.Siemens=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:36:48 :: [x86_64] #100 openscada-DAQ.Siemens: install check OK
	i586: openscada-DAQ.OPC_UA=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:36:52 :: [i586] #100 openscada-DAQ.OPC_UA: install check OK
	x86_64: openscada-DAQ.SoundCard=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:36:59 :: [x86_64] #100 openscada-DAQ.SoundCard: install check OK
	i586: openscada-DAQ.SNMP=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:37:04 :: [i586] #100 openscada-DAQ.SNMP: install check OK
	x86_64: openscada-DAQ.System=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:37:11 :: [x86_64] #100 openscada-DAQ.System: install check OK
	i586: openscada-DAQ.Siemens=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:37:17 :: [i586] #100 openscada-DAQ.Siemens: install check OK
	x86_64: openscada-DB.DBF=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:37:23 :: [x86_64] #100 openscada-DB.DBF: install check OK
	i586: openscada-DAQ.SoundCard=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:37:29 :: [i586] #100 openscada-DAQ.SoundCard: install check OK
	x86_64: openscada-DB.FireBird=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:37:35 :: [x86_64] #100 openscada-DB.FireBird: install check OK
	i586: openscada-DAQ.System=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:37:39 :: [i586] #100 openscada-DAQ.System: install check OK
	x86_64: openscada-DB.MySQL=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:37:48 :: [x86_64] #100 openscada-DB.MySQL: install check OK
	i586: openscada-DB.DBF=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:37:49 :: [i586] #100 openscada-DB.DBF: install check OK
	i586: openscada-DB.FireBird=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:37:59 :: [i586] #100 openscada-DB.FireBird: install check OK
	x86_64: openscada-DB.PostgreSQL=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:38:01 :: [x86_64] #100 openscada-DB.PostgreSQL: install check OK
	i586: openscada-DB.MySQL=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:38:09 :: [i586] #100 openscada-DB.MySQL: install check OK
	x86_64: openscada-DB.SQLite=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:38:12 :: [x86_64] #100 openscada-DB.SQLite: install check OK
	i586: openscada-DB.PostgreSQL=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:38:20 :: [i586] #100 openscada-DB.PostgreSQL: install check OK
	x86_64: openscada-LibDB.Main=0.8.0.6-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2013-May-12 14:38:21 :: [x86_64] #100 openscada-LibDB.Main: install check OK
	i586: openscada-DB.SQLite=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:38:30 :: [i586] #100 openscada-DB.SQLite: install check OK
	x86_64: openscada-LibDB.VCA=0.8.0.6-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2013-May-12 14:38:31 :: [x86_64] #100 openscada-LibDB.VCA: install check OK
	i586: openscada-LibDB.Main=0.8.0.6-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2013-May-12 14:38:40 :: [i586] #100 openscada-LibDB.Main: install check OK
	x86_64: openscada-Model.AGLKS=0.8.0.6-alt0.M51.1 post-install unowned files:
/var/spool/openscada/AGLKS
2013-May-12 14:38:43 :: [x86_64] #100 openscada-Model.AGLKS: install check OK
	i586: openscada-LibDB.VCA=0.8.0.6-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2013-May-12 14:38:50 :: [i586] #100 openscada-LibDB.VCA: install check OK
	x86_64: openscada-Model.Boiler=0.8.0.6-alt0.M51.1 post-install unowned files:
/var/spool/openscada/Boiler
2013-May-12 14:38:55 :: [x86_64] #100 openscada-Model.Boiler: install check OK
	i586: openscada-Model.AGLKS=0.8.0.6-alt0.M51.1 post-install unowned files:
/var/spool/openscada/AGLKS
2013-May-12 14:39:03 :: [i586] #100 openscada-Model.AGLKS: install check OK
	x86_64: openscada-Protocol.HTTP=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:39:04 :: [x86_64] #100 openscada-Protocol.HTTP: install check OK
	x86_64: openscada-Protocol.SelfSystem=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:39:13 :: [x86_64] #100 openscada-Protocol.SelfSystem: install check OK
	i586: openscada-Model.Boiler=0.8.0.6-alt0.M51.1 post-install unowned files:
/var/spool/openscada/Boiler
2013-May-12 14:39:16 :: [i586] #100 openscada-Model.Boiler: install check OK
	x86_64: openscada-Protocol.UserProtocol=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:39:23 :: [x86_64] #100 openscada-Protocol.UserProtocol: install check OK
	i586: openscada-Protocol.HTTP=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:39:25 :: [i586] #100 openscada-Protocol.HTTP: install check OK
	x86_64: openscada-Special.FLibComplex1=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:39:32 :: [x86_64] #100 openscada-Special.FLibComplex1: install check OK
	i586: openscada-Protocol.SelfSystem=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:39:35 :: [i586] #100 openscada-Protocol.SelfSystem: install check OK
	x86_64: openscada-Special.FLibMath=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:39:41 :: [x86_64] #100 openscada-Special.FLibMath: install check OK
	i586: openscada-Protocol.UserProtocol=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:39:45 :: [i586] #100 openscada-Protocol.UserProtocol: install check OK
	x86_64: openscada-Special.FLibSYS=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:39:51 :: [x86_64] #100 openscada-Special.FLibSYS: install check OK
	i586: openscada-Special.FLibComplex1=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:39:55 :: [i586] #100 openscada-Special.FLibComplex1: install check OK
	x86_64: openscada-Special.SystemTests=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:40:01 :: [x86_64] #100 openscada-Special.SystemTests: install check OK
	i586: openscada-Special.FLibMath=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:40:05 :: [i586] #100 openscada-Special.FLibMath: install check OK
	x86_64: openscada-Transport.SSL=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:40:14 :: [x86_64] #100 openscada-Transport.SSL: install check OK
	i586: openscada-Special.FLibSYS=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:40:16 :: [i586] #100 openscada-Special.FLibSYS: install check OK
	x86_64: openscada-Transport.Serial=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:40:24 :: [x86_64] #100 openscada-Transport.Serial: install check OK
	i586: openscada-Special.SystemTests=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:40:26 :: [i586] #100 openscada-Special.SystemTests: install check OK
	x86_64: openscada-Transport.Sockets=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:40:36 :: [x86_64] #100 openscada-Transport.Sockets: install check OK
	i586: openscada-Transport.SSL=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:40:37 :: [i586] #100 openscada-Transport.SSL: install check OK
2013-May-12 14:40:47 :: [x86_64] #100 openscada-UI.QTCfg: install check OK
	i586: openscada-Transport.Serial=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:40:49 :: [i586] #100 openscada-Transport.Serial: install check OK
	i586: openscada-Transport.Sockets=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
	x86_64: openscada-UI.QTStarter=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:40:59 :: [i586] #100 openscada-Transport.Sockets: install check OK
2013-May-12 14:40:59 :: [x86_64] #100 openscada-UI.QTStarter: install check OK
	x86_64: openscada-UI.VCAEngine=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-May-12 14:41:09 :: [x86_64] #100 openscada-UI.VCAEngine: install check OK
2013-May-12 14:41:10 :: [i586] #100 openscada-UI.QTCfg: install check OK
2013-May-12 14:41:20 :: [x86_64] #100 openscada-UI.Vision: install check OK
	i586: openscada-UI.QTStarter=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:41:22 :: [i586] #100 openscada-UI.QTStarter: install check OK
2013-May-12 14:41:30 :: [x86_64] #100 openscada-UI.WebCfg: install check OK
	i586: openscada-UI.VCAEngine=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-May-12 14:41:32 :: [i586] #100 openscada-UI.VCAEngine: install check OK
2013-May-12 14:41:41 :: [x86_64] #100 openscada-UI.WebCfgD: install check OK
2013-May-12 14:41:46 :: [i586] #100 openscada-UI.Vision: install check OK
2013-May-12 14:41:50 :: [x86_64] #100 openscada-UI.WebUser: install check OK
2013-May-12 14:41:55 :: [i586] #100 openscada-UI.WebCfg: install check OK
2013-May-12 14:42:00 :: [x86_64] #100 openscada-UI.WebVision: install check OK
2013-May-12 14:42:05 :: [i586] #100 openscada-UI.WebCfgD: install check OK
	x86_64: openscada-core=0.8.0.6-alt0.M51.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2013-May-12 14:42:09 :: [x86_64] #100 openscada-core: install check OK
2013-May-12 14:42:16 :: [i586] #100 openscada-UI.WebUser: install check OK
	x86_64: openscada-devel=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/include/openscada
2013-May-12 14:42:21 :: [x86_64] #100 openscada-devel: install check OK
2013-May-12 14:42:27 :: [i586] #100 openscada-UI.WebVision: install check OK
2013-May-12 14:42:35 :: [x86_64] #100 openscada-docEN: install check OK
	i586: openscada-core=0.8.0.6-alt0.M51.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2013-May-12 14:42:39 :: [i586] #100 openscada-core: install check OK
2013-May-12 14:42:49 :: [x86_64] #100 openscada-docRU: install check OK
	i586: openscada-devel=0.8.0.6-alt0.M51.1 post-install unowned files:
/usr/include/openscada
2013-May-12 14:42:51 :: [i586] #100 openscada-devel: install check OK
2013-May-12 14:42:57 :: [x86_64] #100 openscada-docUK: install check OK
2013-May-12 14:43:07 :: [i586] #100 openscada-docEN: install check OK
2013-May-12 14:43:09 :: [x86_64] #100 openscada-plc: install check OK
2013-May-12 14:43:22 :: [x86_64] #100 openscada-server: install check OK
2013-May-12 14:43:23 :: [i586] #100 openscada-docRU: install check OK
2013-May-12 14:43:32 :: [i586] #100 openscada-docUK: install check OK
2013-May-12 14:43:37 :: [x86_64] #100 openscada-visStation: install check OK
2013-May-12 14:43:44 :: [i586] #100 openscada-plc: install check OK
2013-May-12 14:43:57 :: [i586] #100 openscada-server: install check OK
2013-May-12 14:44:13 :: [i586] #100 openscada-visStation: install check OK
2013-May-12 14:44:14 :: gears inheritance check OK
2013-May-12 14:44:14 :: srpm inheritance check OK
girar-check-perms: access to openscada ALLOWED for rom_as: project leader
2013-May-12 14:44:14 :: acl check OK
2013-May-12 14:44:27 :: created contents_index files
2013-May-12 14:44:30 :: task #97175 for 5.1 TESTED
2013-May-12 14:44:31 :: task is ready for commit
2013-May-12 14:44:58 :: repo clone OK
2013-May-12 14:45:08 :: packages update OK
2013-May-12 14:45:10 :: [i586 x86_64 noarch] update OK
2013-May-12 14:45:12 :: repo update OK
2013-May-12 14:45:15 :: repo save OK
2013-May-12 14:45:19 :: updated /gears/o/openscada.git branch `5.1'
2013-May-12 14:45:59 :: gears update OK
2013-May-12 14:45:59 :: task #97175 for 5.1 DONE

More information about the Sisyphus-incominger mailing list