[#111063] t6 DONE (try 2) openscada.git=0.8.0.9-alt0.M60T.1

Girar Builder pender robot girar-builder at altlinux.org
Fri Dec 27 23:43:39 MSK 2013 

http://git.altlinux.org/tasks/archive/done/_108/111063/logs/events.2.1.log

2013-Dec-27 18:53:52 :: task #111063 for t6 resumed by rom_as:
#100 build 0.8.0.9-alt0.M60T.1 from /people/rom_as/packages/openscada.git
2013-Dec-27 18:53:53 :: [i586] #100 openscada.git 0.8.0.9-alt0.M60T.1: build start
2013-Dec-27 18:53:53 :: [x86_64] #100 openscada.git 0.8.0.9-alt0.M60T.1: build start
2013-Dec-27 18:54:32 :: [i586] openscada.git 0.8.0.9-alt0.M60T.1: remote: no need to rebuild
2013-Dec-27 18:54:32 :: [x86_64] openscada.git 0.8.0.9-alt0.M60T.1: remote: no need to rebuild
build/100/i586/log:debuginfo.req: WARNING: /usr/lib/libportaudio.so.2 is not yet debuginfo-enabled
build/100/x86_64/log:debuginfo.req: WARNING: /usr/lib64/libportaudio.so.2 is not yet debuginfo-enabled
2013-Dec-27 18:54:32 :: [i586] #100 openscada.git 0.8.0.9-alt0.M60T.1: build OK
2013-Dec-27 18:54:32 :: [x86_64] #100 openscada.git 0.8.0.9-alt0.M60T.1: build OK
2013-Dec-27 18:55:33 :: build check OK
2013-Dec-27 18:56:05 :: noarch check OK
2013-Dec-27 18:56:06 :: plan: src +1 -1 =12802, i586 +84 -84 =21396, noarch +8 -8 =11856, x86_64 +80 -80 =21280
2013-Dec-27 18:56:07 :: version check OK
2013-Dec-27 19:02:36 :: generated apt indices
2013-Dec-27 19:03:03 :: created next repo
2013-Dec-27 19:03:18 :: dependencies check OK
2013-Dec-27 19:07:38 :: ELF symbols check OK
2013-Dec-27 19:08:22 :: [i586] #100 openscada: install check OK
2013-Dec-27 19:08:25 :: [x86_64] #100 openscada: install check OK
	i586: openscada-Archive.DBArch=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:08:39 :: [i586] #100 openscada-Archive.DBArch: install check OK
	x86_64: openscada-Archive.DBArch=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:08:42 :: [x86_64] #100 openscada-Archive.DBArch: install check OK
2013-Dec-27 19:09:03 :: [i586] #100 openscada-Archive.DBArch-debuginfo: install check OK
2013-Dec-27 19:09:06 :: [x86_64] #100 openscada-Archive.DBArch-debuginfo: install check OK
	i586: openscada-Archive.FSArch=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:09:20 :: [i586] #100 openscada-Archive.FSArch: install check OK
	x86_64: openscada-Archive.FSArch=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:09:23 :: [x86_64] #100 openscada-Archive.FSArch: install check OK
2013-Dec-27 19:09:42 :: [i586] #100 openscada-Archive.FSArch-debuginfo: install check OK
2013-Dec-27 19:09:43 :: [x86_64] #100 openscada-Archive.FSArch-debuginfo: install check OK
	i586: openscada-DAQ.BFN=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
	x86_64: openscada-DAQ.BFN=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:09:59 :: [i586] #100 openscada-DAQ.BFN: install check OK
2013-Dec-27 19:10:00 :: [x86_64] #100 openscada-DAQ.BFN: install check OK
2013-Dec-27 19:10:19 :: [x86_64] #100 openscada-DAQ.BFN-debuginfo: install check OK
2013-Dec-27 19:10:20 :: [i586] #100 openscada-DAQ.BFN-debuginfo: install check OK
	x86_64: openscada-DAQ.BlockCalc=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
	i586: openscada-DAQ.BlockCalc=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:10:36 :: [x86_64] #100 openscada-DAQ.BlockCalc: install check OK
2013-Dec-27 19:10:37 :: [i586] #100 openscada-DAQ.BlockCalc: install check OK
2013-Dec-27 19:10:56 :: [x86_64] #100 openscada-DAQ.BlockCalc-debuginfo: install check OK
2013-Dec-27 19:10:57 :: [i586] #100 openscada-DAQ.BlockCalc-debuginfo: install check OK
	x86_64: openscada-DAQ.DAQGate=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:11:13 :: [x86_64] #100 openscada-DAQ.DAQGate: install check OK
	i586: openscada-DAQ.DAQGate=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:11:14 :: [i586] #100 openscada-DAQ.DAQGate: install check OK
2013-Dec-27 19:11:32 :: [x86_64] #100 openscada-DAQ.DAQGate-debuginfo: install check OK
2013-Dec-27 19:11:34 :: [i586] #100 openscada-DAQ.DAQGate-debuginfo: install check OK
	x86_64: openscada-DAQ.DCON=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:11:49 :: [x86_64] #100 openscada-DAQ.DCON: install check OK
	i586: openscada-DAQ.DCON=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:11:51 :: [i586] #100 openscada-DAQ.DCON: install check OK
2013-Dec-27 19:12:09 :: [x86_64] #100 openscada-DAQ.DCON-debuginfo: install check OK
2013-Dec-27 19:12:12 :: [i586] #100 openscada-DAQ.DCON-debuginfo: install check OK
	x86_64: openscada-DAQ.JavaLikeCalc=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:12:26 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc: install check OK
	i586: openscada-DAQ.DiamondBoards=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:12:29 :: [i586] #100 openscada-DAQ.DiamondBoards: install check OK
2013-Dec-27 19:12:45 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2013-Dec-27 19:12:49 :: [i586] #100 openscada-DAQ.DiamondBoards-debuginfo: install check OK
	x86_64: openscada-DAQ.LogicLev=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:13:02 :: [x86_64] #100 openscada-DAQ.LogicLev: install check OK
	i586: openscada-DAQ.ICP_DAS=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:13:07 :: [i586] #100 openscada-DAQ.ICP_DAS: install check OK
2013-Dec-27 19:13:22 :: [x86_64] #100 openscada-DAQ.LogicLev-debuginfo: install check OK
2013-Dec-27 19:13:27 :: [i586] #100 openscada-DAQ.ICP_DAS-debuginfo: install check OK
	x86_64: openscada-DAQ.ModBus=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:13:38 :: [x86_64] #100 openscada-DAQ.ModBus: install check OK
	i586: openscada-DAQ.JavaLikeCalc=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:13:45 :: [i586] #100 openscada-DAQ.JavaLikeCalc: install check OK
2013-Dec-27 19:13:58 :: [x86_64] #100 openscada-DAQ.ModBus-debuginfo: install check OK
2013-Dec-27 19:14:05 :: [i586] #100 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
	x86_64: openscada-DAQ.OPC_UA=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:14:15 :: [x86_64] #100 openscada-DAQ.OPC_UA: install check OK
	i586: openscada-DAQ.LogicLev=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:14:23 :: [i586] #100 openscada-DAQ.LogicLev: install check OK
2013-Dec-27 19:14:35 :: [x86_64] #100 openscada-DAQ.OPC_UA-debuginfo: install check OK
2013-Dec-27 19:14:43 :: [i586] #100 openscada-DAQ.LogicLev-debuginfo: install check OK
	x86_64: openscada-DAQ.SNMP=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:14:53 :: [x86_64] #100 openscada-DAQ.SNMP: install check OK
	i586: openscada-DAQ.ModBus=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:15:00 :: [i586] #100 openscada-DAQ.ModBus: install check OK
2013-Dec-27 19:15:14 :: [x86_64] #100 openscada-DAQ.SNMP-debuginfo: install check OK
2013-Dec-27 19:15:20 :: [i586] #100 openscada-DAQ.ModBus-debuginfo: install check OK
	x86_64: openscada-DAQ.Siemens=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:15:32 :: [x86_64] #100 openscada-DAQ.Siemens: install check OK
	i586: openscada-DAQ.OPC_UA=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:15:37 :: [i586] #100 openscada-DAQ.OPC_UA: install check OK
2013-Dec-27 19:15:51 :: [x86_64] #100 openscada-DAQ.Siemens-debuginfo: install check OK
2013-Dec-27 19:15:58 :: [i586] #100 openscada-DAQ.OPC_UA-debuginfo: install check OK
	x86_64: openscada-DAQ.SoundCard=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:16:08 :: [x86_64] #100 openscada-DAQ.SoundCard: install check OK
	i586: openscada-DAQ.SNMP=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:16:16 :: [i586] #100 openscada-DAQ.SNMP: install check OK
2013-Dec-27 19:16:28 :: [x86_64] #100 openscada-DAQ.SoundCard-debuginfo: install check OK
2013-Dec-27 19:16:39 :: [i586] #100 openscada-DAQ.SNMP-debuginfo: install check OK
	x86_64: openscada-DAQ.System=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:16:45 :: [x86_64] #100 openscada-DAQ.System: install check OK
	i586: openscada-DAQ.Siemens=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:16:56 :: [i586] #100 openscada-DAQ.Siemens: install check OK
2013-Dec-27 19:17:04 :: [x86_64] #100 openscada-DAQ.System-debuginfo: install check OK
2013-Dec-27 19:17:17 :: [i586] #100 openscada-DAQ.Siemens-debuginfo: install check OK
	x86_64: openscada-DB.DBF=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:17:21 :: [x86_64] #100 openscada-DB.DBF: install check OK
	i586: openscada-DAQ.SoundCard=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:17:34 :: [i586] #100 openscada-DAQ.SoundCard: install check OK
2013-Dec-27 19:17:41 :: [x86_64] #100 openscada-DB.DBF-debuginfo: install check OK
2013-Dec-27 19:17:54 :: [i586] #100 openscada-DAQ.SoundCard-debuginfo: install check OK
	x86_64: openscada-DB.FireBird=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:17:58 :: [x86_64] #100 openscada-DB.FireBird: install check OK
	i586: openscada-DAQ.System=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:18:11 :: [i586] #100 openscada-DAQ.System: install check OK
2013-Dec-27 19:18:17 :: [x86_64] #100 openscada-DB.FireBird-debuginfo: install check OK
2013-Dec-27 19:18:31 :: [i586] #100 openscada-DAQ.System-debuginfo: install check OK
	x86_64: openscada-DB.MySQL=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:18:35 :: [x86_64] #100 openscada-DB.MySQL: install check OK
	i586: openscada-DB.DBF=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:18:49 :: [i586] #100 openscada-DB.DBF: install check OK
2013-Dec-27 19:18:56 :: [x86_64] #100 openscada-DB.MySQL-debuginfo: install check OK
2013-Dec-27 19:19:09 :: [i586] #100 openscada-DB.DBF-debuginfo: install check OK
	x86_64: openscada-DB.PostgreSQL=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:19:13 :: [x86_64] #100 openscada-DB.PostgreSQL: install check OK
	i586: openscada-DB.FireBird=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:19:26 :: [i586] #100 openscada-DB.FireBird: install check OK
2013-Dec-27 19:19:36 :: [x86_64] #100 openscada-DB.PostgreSQL-debuginfo: install check OK
2013-Dec-27 19:19:47 :: [i586] #100 openscada-DB.FireBird-debuginfo: install check OK
	x86_64: openscada-DB.SQLite=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:19:53 :: [x86_64] #100 openscada-DB.SQLite: install check OK
	i586: openscada-DB.MySQL=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:20:05 :: [i586] #100 openscada-DB.MySQL: install check OK
2013-Dec-27 19:20:13 :: [x86_64] #100 openscada-DB.SQLite-debuginfo: install check OK
2013-Dec-27 19:20:27 :: [i586] #100 openscada-DB.MySQL-debuginfo: install check OK
	x86_64: openscada-LibDB.Main=0.8.0.9-alt0.M60T.1 post-install unowned files:
/var/spool/openscada/LibsDB
2013-Dec-27 19:20:30 :: [x86_64] #100 openscada-LibDB.Main: install check OK
	i586: openscada-DB.PostgreSQL=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:20:45 :: [i586] #100 openscada-DB.PostgreSQL: install check OK
	x86_64: openscada-LibDB.VCA=0.8.0.9-alt0.M60T.1 post-install unowned files:
/var/spool/openscada/LibsDB
2013-Dec-27 19:20:47 :: [x86_64] #100 openscada-LibDB.VCA: install check OK
	x86_64: openscada-Model.AGLKS=0.8.0.9-alt0.M60T.1 post-install unowned files:
/var/spool/openscada/AGLKS
2013-Dec-27 19:21:06 :: [x86_64] #100 openscada-Model.AGLKS: install check OK
2013-Dec-27 19:21:07 :: [i586] #100 openscada-DB.PostgreSQL-debuginfo: install check OK
	i586: openscada-DB.SQLite=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:21:24 :: [i586] #100 openscada-DB.SQLite: install check OK
	x86_64: openscada-Model.Boiler=0.8.0.9-alt0.M60T.1 post-install unowned files:
/var/spool/openscada/Boiler
2013-Dec-27 19:21:26 :: [x86_64] #100 openscada-Model.Boiler: install check OK
	x86_64: openscada-Protocol.HTTP=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:21:43 :: [x86_64] #100 openscada-Protocol.HTTP: install check OK
2013-Dec-27 19:21:45 :: [i586] #100 openscada-DB.SQLite-debuginfo: install check OK
	i586: openscada-LibDB.Main=0.8.0.9-alt0.M60T.1 post-install unowned files:
/var/spool/openscada/LibsDB
2013-Dec-27 19:22:02 :: [x86_64] #100 openscada-Protocol.HTTP-debuginfo: install check OK
2013-Dec-27 19:22:02 :: [i586] #100 openscada-LibDB.Main: install check OK
	x86_64: openscada-Protocol.SelfSystem=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
	i586: openscada-LibDB.VCA=0.8.0.9-alt0.M60T.1 post-install unowned files:
/var/spool/openscada/LibsDB
2013-Dec-27 19:22:19 :: [x86_64] #100 openscada-Protocol.SelfSystem: install check OK
2013-Dec-27 19:22:20 :: [i586] #100 openscada-LibDB.VCA: install check OK
2013-Dec-27 19:22:39 :: [x86_64] #100 openscada-Protocol.SelfSystem-debuginfo: install check OK
	i586: openscada-Model.AGLKS=0.8.0.9-alt0.M60T.1 post-install unowned files:
/var/spool/openscada/AGLKS
2013-Dec-27 19:22:40 :: [i586] #100 openscada-Model.AGLKS: install check OK
	x86_64: openscada-Protocol.UserProtocol=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:22:55 :: [x86_64] #100 openscada-Protocol.UserProtocol: install check OK
	i586: openscada-Model.Boiler=0.8.0.9-alt0.M60T.1 post-install unowned files:
/var/spool/openscada/Boiler
2013-Dec-27 19:23:00 :: [i586] #100 openscada-Model.Boiler: install check OK
2013-Dec-27 19:23:15 :: [x86_64] #100 openscada-Protocol.UserProtocol-debuginfo: install check OK
	i586: openscada-Protocol.HTTP=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:23:17 :: [i586] #100 openscada-Protocol.HTTP: install check OK
	x86_64: openscada-Special.FLibComplex1=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:23:32 :: [x86_64] #100 openscada-Special.FLibComplex1: install check OK
2013-Dec-27 19:23:37 :: [i586] #100 openscada-Protocol.HTTP-debuginfo: install check OK
2013-Dec-27 19:23:51 :: [x86_64] #100 openscada-Special.FLibComplex1-debuginfo: install check OK
	i586: openscada-Protocol.SelfSystem=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:23:55 :: [i586] #100 openscada-Protocol.SelfSystem: install check OK
	x86_64: openscada-Special.FLibMath=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:24:08 :: [x86_64] #100 openscada-Special.FLibMath: install check OK
2013-Dec-27 19:24:15 :: [i586] #100 openscada-Protocol.SelfSystem-debuginfo: install check OK
2013-Dec-27 19:24:28 :: [x86_64] #100 openscada-Special.FLibMath-debuginfo: install check OK
	i586: openscada-Protocol.UserProtocol=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:24:32 :: [i586] #100 openscada-Protocol.UserProtocol: install check OK
	x86_64: openscada-Special.FLibSYS=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:24:45 :: [x86_64] #100 openscada-Special.FLibSYS: install check OK
2013-Dec-27 19:24:52 :: [i586] #100 openscada-Protocol.UserProtocol-debuginfo: install check OK
2013-Dec-27 19:25:05 :: [x86_64] #100 openscada-Special.FLibSYS-debuginfo: install check OK
	i586: openscada-Special.FLibComplex1=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:25:09 :: [i586] #100 openscada-Special.FLibComplex1: install check OK
	x86_64: openscada-Special.SystemTests=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:25:22 :: [x86_64] #100 openscada-Special.SystemTests: install check OK
2013-Dec-27 19:25:29 :: [i586] #100 openscada-Special.FLibComplex1-debuginfo: install check OK
2013-Dec-27 19:25:41 :: [x86_64] #100 openscada-Special.SystemTests-debuginfo: install check OK
	i586: openscada-Special.FLibMath=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:25:46 :: [i586] #100 openscada-Special.FLibMath: install check OK
	x86_64: openscada-Transport.SSL=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:25:58 :: [x86_64] #100 openscada-Transport.SSL: install check OK
2013-Dec-27 19:26:06 :: [i586] #100 openscada-Special.FLibMath-debuginfo: install check OK
2013-Dec-27 19:26:19 :: [x86_64] #100 openscada-Transport.SSL-debuginfo: install check OK
	i586: openscada-Special.FLibSYS=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:26:23 :: [i586] #100 openscada-Special.FLibSYS: install check OK
	x86_64: openscada-Transport.Serial=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:26:36 :: [x86_64] #100 openscada-Transport.Serial: install check OK
2013-Dec-27 19:26:45 :: [i586] #100 openscada-Special.FLibSYS-debuginfo: install check OK
2013-Dec-27 19:26:55 :: [x86_64] #100 openscada-Transport.Serial-debuginfo: install check OK
	i586: openscada-Special.SystemTests=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:27:02 :: [i586] #100 openscada-Special.SystemTests: install check OK
	x86_64: openscada-Transport.Sockets=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:27:12 :: [x86_64] #100 openscada-Transport.Sockets: install check OK
2013-Dec-27 19:27:22 :: [i586] #100 openscada-Special.SystemTests-debuginfo: install check OK
2013-Dec-27 19:27:31 :: [x86_64] #100 openscada-Transport.Sockets-debuginfo: install check OK
	i586: openscada-Transport.SSL=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:27:39 :: [i586] #100 openscada-Transport.SSL: install check OK
2013-Dec-27 19:27:50 :: [x86_64] #100 openscada-UI.QTCfg: install check OK
2013-Dec-27 19:28:01 :: [i586] #100 openscada-Transport.SSL-debuginfo: install check OK
2013-Dec-27 19:28:18 :: [x86_64] #100 openscada-UI.QTCfg-debuginfo: install check OK
	i586: openscada-Transport.Serial=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:28:18 :: [i586] #100 openscada-Transport.Serial: install check OK
	x86_64: openscada-UI.QTStarter=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:28:36 :: [x86_64] #100 openscada-UI.QTStarter: install check OK
2013-Dec-27 19:28:38 :: [i586] #100 openscada-Transport.Serial-debuginfo: install check OK
	i586: openscada-Transport.Sockets=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:28:56 :: [i586] #100 openscada-Transport.Sockets: install check OK
2013-Dec-27 19:29:02 :: [x86_64] #100 openscada-UI.QTStarter-debuginfo: install check OK
2013-Dec-27 19:29:16 :: [i586] #100 openscada-Transport.Sockets-debuginfo: install check OK
	x86_64: openscada-UI.VCAEngine=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-27 19:29:20 :: [x86_64] #100 openscada-UI.VCAEngine: install check OK
2013-Dec-27 19:29:34 :: [i586] #100 openscada-UI.QTCfg: install check OK
2013-Dec-27 19:29:39 :: [x86_64] #100 openscada-UI.VCAEngine-debuginfo: install check OK
2013-Dec-27 19:29:58 :: [x86_64] #100 openscada-UI.Vision: install check OK
2013-Dec-27 19:30:04 :: [i586] #100 openscada-UI.QTCfg-debuginfo: install check OK
	i586: openscada-UI.QTStarter=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:30:23 :: [i586] #100 openscada-UI.QTStarter: install check OK
2013-Dec-27 19:30:27 :: [x86_64] #100 openscada-UI.Vision-debuginfo: install check OK
2013-Dec-27 19:30:44 :: [x86_64] #100 openscada-UI.WebCfg: install check OK
2013-Dec-27 19:30:52 :: [i586] #100 openscada-UI.QTStarter-debuginfo: install check OK
2013-Dec-27 19:31:03 :: [x86_64] #100 openscada-UI.WebCfg-debuginfo: install check OK
	i586: openscada-UI.VCAEngine=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-27 19:31:09 :: [i586] #100 openscada-UI.VCAEngine: install check OK
2013-Dec-27 19:31:20 :: [x86_64] #100 openscada-UI.WebCfgD: install check OK
2013-Dec-27 19:31:30 :: [i586] #100 openscada-UI.VCAEngine-debuginfo: install check OK
2013-Dec-27 19:31:40 :: [x86_64] #100 openscada-UI.WebCfgD-debuginfo: install check OK
2013-Dec-27 19:31:49 :: [i586] #100 openscada-UI.Vision: install check OK
2013-Dec-27 19:31:57 :: [x86_64] #100 openscada-UI.WebUser: install check OK
2013-Dec-27 19:32:16 :: [x86_64] #100 openscada-UI.WebUser-debuginfo: install check OK
2013-Dec-27 19:32:21 :: [i586] #100 openscada-UI.Vision-debuginfo: install check OK
2013-Dec-27 19:32:33 :: [x86_64] #100 openscada-UI.WebVision: install check OK
2013-Dec-27 19:32:38 :: [i586] #100 openscada-UI.WebCfg: install check OK
2013-Dec-27 19:32:53 :: [x86_64] #100 openscada-UI.WebVision-debuginfo: install check OK
2013-Dec-27 19:32:58 :: [i586] #100 openscada-UI.WebCfg-debuginfo: install check OK
	x86_64: openscada-core=0.8.0.9-alt0.M60T.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2013-Dec-27 19:33:10 :: [x86_64] #100 openscada-core: install check OK
2013-Dec-27 19:33:15 :: [i586] #100 openscada-UI.WebCfgD: install check OK
2013-Dec-27 19:33:29 :: [x86_64] #100 openscada-core-debuginfo: install check OK
2013-Dec-27 19:33:35 :: [i586] #100 openscada-UI.WebCfgD-debuginfo: install check OK
	x86_64: openscada-devel=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/include/openscada
2013-Dec-27 19:33:47 :: [x86_64] #100 openscada-devel: install check OK
2013-Dec-27 19:33:53 :: [i586] #100 openscada-UI.WebUser: install check OK
2013-Dec-27 19:34:05 :: [x86_64] #100 openscada-docEN: install check OK
2013-Dec-27 19:34:13 :: [i586] #100 openscada-UI.WebUser-debuginfo: install check OK
2013-Dec-27 19:34:24 :: [x86_64] #100 openscada-docRU: install check OK
2013-Dec-27 19:34:30 :: [i586] #100 openscada-UI.WebVision: install check OK
2013-Dec-27 19:34:38 :: [x86_64] #100 openscada-docUK: install check OK
2013-Dec-27 19:34:51 :: [i586] #100 openscada-UI.WebVision-debuginfo: install check OK
2013-Dec-27 19:34:55 :: [x86_64] #100 openscada-plc: install check OK
	i586: openscada-core=0.8.0.9-alt0.M60T.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2013-Dec-27 19:35:08 :: [i586] #100 openscada-core: install check OK
2013-Dec-27 19:35:13 :: [x86_64] #100 openscada-server: install check OK
2013-Dec-27 19:35:28 :: [i586] #100 openscada-core-debuginfo: install check OK
2013-Dec-27 19:35:32 :: [x86_64] #100 openscada-visStation: install check OK
	i586: openscada-devel=0.8.0.9-alt0.M60T.1 post-install unowned files:
/usr/include/openscada
2013-Dec-27 19:35:47 :: [i586] #100 openscada-devel: install check OK
2013-Dec-27 19:36:06 :: [i586] #100 openscada-docEN: install check OK
2013-Dec-27 19:36:26 :: [i586] #100 openscada-docRU: install check OK
2013-Dec-27 19:36:39 :: [i586] #100 openscada-docUK: install check OK
2013-Dec-27 19:36:57 :: [i586] #100 openscada-plc: install check OK
2013-Dec-27 19:37:16 :: [i586] #100 openscada-server: install check OK
2013-Dec-27 19:37:36 :: [i586] #100 openscada-visStation: install check OK
2013-Dec-27 19:37:40 :: [x86_64-i586] plan: #41 +41 -41 =7890
2013-Dec-27 19:39:43 :: [x86_64-i586] arepo build OK
2013-Dec-27 19:40:31 :: [x86_64-i586] generated apt indices
2013-Dec-27 19:40:34 :: [x86_64-i586] created next repo
2013-Dec-27 19:40:42 :: [x86_64-i586] dependencies check OK
2013-Dec-27 19:40:43 :: gears inheritance check OK
2013-Dec-27 19:40:43 :: srpm inheritance check OK
girar-check-perms: access to openscada ALLOWED for rom_as: project leader
2013-Dec-27 19:40:43 :: acl check OK
2013-Dec-27 19:41:00 :: created contents_index files
2013-Dec-27 19:41:06 :: created hash files: i586 noarch src x86_64-i586 x86_64
2013-Dec-27 19:41:10 :: task #111063 for t6 TESTED
2013-Dec-27 19:41:10 :: task is ready for commit
2013-Dec-27 19:42:30 :: repo clone OK
2013-Dec-27 19:42:44 :: packages update OK
2013-Dec-27 19:42:50 :: [i586 x86_64 noarch] update OK
2013-Dec-27 19:42:53 :: [x86_64-i586] update OK
2013-Dec-27 19:42:53 :: repo update OK
2013-Dec-27 19:43:04 :: repo save OK
2013-Dec-27 19:43:14 :: updated /gears/o/openscada.git branch `t6'
2013-Dec-27 19:43:38 :: gears update OK
2013-Dec-27 19:43:38 :: task #111063 for t6 DONE

More information about the Sisyphus-incominger mailing list