[#111064] 5.1 DONE openscada.git=0.8.0.9-alt0.M51.1
Girar Builder pender robot
girar-builder at altlinux.org
Fri Dec 27 01:18:50 MSK 2013
http://git.altlinux.org/tasks/archive/done/_108/111064/logs/events.1.1.log
2013-Dec-26 20:39:59 :: task #111064 for 5.1 started by rom_as:
#100 build 0.8.0.9-alt0.M51.1 from /people/rom_as/packages/openscada.git
2013-Dec-26 20:39:59 :: [i586] #100 openscada.git 0.8.0.9-alt0.M51.1: build start
2013-Dec-26 20:39:59 :: [x86_64] #100 openscada.git 0.8.0.9-alt0.M51.1: build start
2013-Dec-26 20:55:15 :: [x86_64] #100 openscada.git 0.8.0.9-alt0.M51.1: build OK
2013-Dec-26 20:57:04 :: [i586] #100 openscada.git 0.8.0.9-alt0.M51.1: build OK
2013-Dec-26 20:57:33 :: build check OK
2013-Dec-26 20:57:58 :: noarch check OK
2013-Dec-26 20:57:59 :: plan: src +1 -1 =9780, i586 +44 -44 =12214, noarch +8 -8 =8279, x86_64 +42 -42 =12054
2013-Dec-26 20:57:59 :: version check OK
2013-Dec-26 21:00:12 :: generated apt indices
2013-Dec-26 21:00:26 :: created next repo
2013-Dec-26 21:00:28 :: dependencies check OK
2013-Dec-26 21:03:54 :: ELF symbols check OK
2013-Dec-26 21:04:21 :: [x86_64] #100 openscada: install check OK
2013-Dec-26 21:04:22 :: [i586] #100 openscada: install check OK
x86_64: openscada-Archive.DBArch=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:04:35 :: [x86_64] #100 openscada-Archive.DBArch: install check OK
i586: openscada-Archive.DBArch=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:04:36 :: [i586] #100 openscada-Archive.DBArch: install check OK
x86_64: openscada-Archive.FSArch=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:04:48 :: [x86_64] #100 openscada-Archive.FSArch: install check OK
i586: openscada-Archive.FSArch=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:04:50 :: [i586] #100 openscada-Archive.FSArch: install check OK
x86_64: openscada-DAQ.BFN=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:05:01 :: [x86_64] #100 openscada-DAQ.BFN: install check OK
i586: openscada-DAQ.BFN=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:05:03 :: [i586] #100 openscada-DAQ.BFN: install check OK
x86_64: openscada-DAQ.BlockCalc=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:05:15 :: [x86_64] #100 openscada-DAQ.BlockCalc: install check OK
i586: openscada-DAQ.BlockCalc=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:05:17 :: [i586] #100 openscada-DAQ.BlockCalc: install check OK
x86_64: openscada-DAQ.DAQGate=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:05:28 :: [x86_64] #100 openscada-DAQ.DAQGate: install check OK
i586: openscada-DAQ.DAQGate=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:05:31 :: [i586] #100 openscada-DAQ.DAQGate: install check OK
x86_64: openscada-DAQ.DCON=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:05:41 :: [x86_64] #100 openscada-DAQ.DCON: install check OK
i586: openscada-DAQ.DCON=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:05:44 :: [i586] #100 openscada-DAQ.DCON: install check OK
x86_64: openscada-DAQ.JavaLikeCalc=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:05:55 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc: install check OK
i586: openscada-DAQ.DiamondBoards=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:05:58 :: [i586] #100 openscada-DAQ.DiamondBoards: install check OK
x86_64: openscada-DAQ.LogicLev=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:06:08 :: [x86_64] #100 openscada-DAQ.LogicLev: install check OK
i586: openscada-DAQ.ICP_DAS=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:06:11 :: [i586] #100 openscada-DAQ.ICP_DAS: install check OK
x86_64: openscada-DAQ.ModBus=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:06:22 :: [x86_64] #100 openscada-DAQ.ModBus: install check OK
i586: openscada-DAQ.JavaLikeCalc=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:06:25 :: [i586] #100 openscada-DAQ.JavaLikeCalc: install check OK
x86_64: openscada-DAQ.OPC_UA=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:06:35 :: [x86_64] #100 openscada-DAQ.OPC_UA: install check OK
i586: openscada-DAQ.LogicLev=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:06:38 :: [i586] #100 openscada-DAQ.LogicLev: install check OK
x86_64: openscada-DAQ.SNMP=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:06:49 :: [x86_64] #100 openscada-DAQ.SNMP: install check OK
i586: openscada-DAQ.ModBus=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:06:52 :: [i586] #100 openscada-DAQ.ModBus: install check OK
x86_64: openscada-DAQ.Siemens=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:07:02 :: [x86_64] #100 openscada-DAQ.Siemens: install check OK
i586: openscada-DAQ.OPC_UA=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:07:06 :: [i586] #100 openscada-DAQ.OPC_UA: install check OK
x86_64: openscada-DAQ.SoundCard=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:07:16 :: [x86_64] #100 openscada-DAQ.SoundCard: install check OK
i586: openscada-DAQ.SNMP=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:07:20 :: [i586] #100 openscada-DAQ.SNMP: install check OK
x86_64: openscada-DAQ.System=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:07:30 :: [x86_64] #100 openscada-DAQ.System: install check OK
i586: openscada-DAQ.Siemens=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:07:34 :: [i586] #100 openscada-DAQ.Siemens: install check OK
x86_64: openscada-DB.DBF=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:07:43 :: [x86_64] #100 openscada-DB.DBF: install check OK
i586: openscada-DAQ.SoundCard=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:07:48 :: [i586] #100 openscada-DAQ.SoundCard: install check OK
x86_64: openscada-DB.FireBird=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:07:57 :: [x86_64] #100 openscada-DB.FireBird: install check OK
i586: openscada-DAQ.System=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:08:02 :: [i586] #100 openscada-DAQ.System: install check OK
x86_64: openscada-DB.MySQL=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:08:10 :: [x86_64] #100 openscada-DB.MySQL: install check OK
i586: openscada-DB.DBF=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:08:16 :: [i586] #100 openscada-DB.DBF: install check OK
x86_64: openscada-DB.PostgreSQL=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:08:24 :: [x86_64] #100 openscada-DB.PostgreSQL: install check OK
i586: openscada-DB.FireBird=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:08:30 :: [i586] #100 openscada-DB.FireBird: install check OK
x86_64: openscada-DB.SQLite=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:08:38 :: [x86_64] #100 openscada-DB.SQLite: install check OK
i586: openscada-DB.MySQL=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:08:44 :: [i586] #100 openscada-DB.MySQL: install check OK
x86_64: openscada-LibDB.Main=0.8.0.9-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2013-Dec-26 21:08:51 :: [x86_64] #100 openscada-LibDB.Main: install check OK
i586: openscada-DB.PostgreSQL=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:08:58 :: [i586] #100 openscada-DB.PostgreSQL: install check OK
x86_64: openscada-LibDB.VCA=0.8.0.9-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2013-Dec-26 21:09:05 :: [x86_64] #100 openscada-LibDB.VCA: install check OK
i586: openscada-DB.SQLite=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:09:11 :: [i586] #100 openscada-DB.SQLite: install check OK
x86_64: openscada-Model.AGLKS=0.8.0.9-alt0.M51.1 post-install unowned files:
/var/spool/openscada/AGLKS
2013-Dec-26 21:09:21 :: [x86_64] #100 openscada-Model.AGLKS: install check OK
i586: openscada-LibDB.Main=0.8.0.9-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2013-Dec-26 21:09:25 :: [i586] #100 openscada-LibDB.Main: install check OK
x86_64: openscada-Model.Boiler=0.8.0.9-alt0.M51.1 post-install unowned files:
/var/spool/openscada/Boiler
2013-Dec-26 21:09:36 :: [x86_64] #100 openscada-Model.Boiler: install check OK
i586: openscada-LibDB.VCA=0.8.0.9-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2013-Dec-26 21:09:39 :: [i586] #100 openscada-LibDB.VCA: install check OK
x86_64: openscada-Protocol.HTTP=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:09:50 :: [x86_64] #100 openscada-Protocol.HTTP: install check OK
i586: openscada-Model.AGLKS=0.8.0.9-alt0.M51.1 post-install unowned files:
/var/spool/openscada/AGLKS
2013-Dec-26 21:09:56 :: [i586] #100 openscada-Model.AGLKS: install check OK
x86_64: openscada-Protocol.SelfSystem=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:10:04 :: [x86_64] #100 openscada-Protocol.SelfSystem: install check OK
i586: openscada-Model.Boiler=0.8.0.9-alt0.M51.1 post-install unowned files:
/var/spool/openscada/Boiler
2013-Dec-26 21:10:13 :: [i586] #100 openscada-Model.Boiler: install check OK
x86_64: openscada-Protocol.UserProtocol=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:10:17 :: [x86_64] #100 openscada-Protocol.UserProtocol: install check OK
i586: openscada-Protocol.HTTP=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:10:26 :: [i586] #100 openscada-Protocol.HTTP: install check OK
x86_64: openscada-Special.FLibComplex1=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:10:30 :: [x86_64] #100 openscada-Special.FLibComplex1: install check OK
i586: openscada-Protocol.SelfSystem=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:10:40 :: [i586] #100 openscada-Protocol.SelfSystem: install check OK
x86_64: openscada-Special.FLibMath=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:10:44 :: [x86_64] #100 openscada-Special.FLibMath: install check OK
i586: openscada-Protocol.UserProtocol=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:10:54 :: [i586] #100 openscada-Protocol.UserProtocol: install check OK
x86_64: openscada-Special.FLibSYS=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:10:57 :: [x86_64] #100 openscada-Special.FLibSYS: install check OK
i586: openscada-Special.FLibComplex1=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:11:08 :: [i586] #100 openscada-Special.FLibComplex1: install check OK
x86_64: openscada-Special.SystemTests=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:11:11 :: [x86_64] #100 openscada-Special.SystemTests: install check OK
i586: openscada-Special.FLibMath=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:11:21 :: [i586] #100 openscada-Special.FLibMath: install check OK
x86_64: openscada-Transport.SSL=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:11:24 :: [x86_64] #100 openscada-Transport.SSL: install check OK
i586: openscada-Special.FLibSYS=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:11:35 :: [i586] #100 openscada-Special.FLibSYS: install check OK
x86_64: openscada-Transport.Serial=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:11:37 :: [x86_64] #100 openscada-Transport.Serial: install check OK
i586: openscada-Special.SystemTests=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:11:49 :: [i586] #100 openscada-Special.SystemTests: install check OK
x86_64: openscada-Transport.Sockets=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:11:51 :: [x86_64] #100 openscada-Transport.Sockets: install check OK
i586: openscada-Transport.SSL=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:12:03 :: [i586] #100 openscada-Transport.SSL: install check OK
2013-Dec-26 21:12:05 :: [x86_64] #100 openscada-UI.QTCfg: install check OK
i586: openscada-Transport.Serial=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:12:16 :: [i586] #100 openscada-Transport.Serial: install check OK
x86_64: openscada-UI.QTStarter=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:12:20 :: [x86_64] #100 openscada-UI.QTStarter: install check OK
i586: openscada-Transport.Sockets=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:12:30 :: [i586] #100 openscada-Transport.Sockets: install check OK
x86_64: openscada-UI.VCAEngine=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2013-Dec-26 21:12:33 :: [x86_64] #100 openscada-UI.VCAEngine: install check OK
2013-Dec-26 21:12:45 :: [i586] #100 openscada-UI.QTCfg: install check OK
2013-Dec-26 21:12:48 :: [x86_64] #100 openscada-UI.Vision: install check OK
i586: openscada-UI.QTStarter=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:13:01 :: [i586] #100 openscada-UI.QTStarter: install check OK
2013-Dec-26 21:13:02 :: [x86_64] #100 openscada-UI.WebCfg: install check OK
i586: openscada-UI.VCAEngine=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2013-Dec-26 21:13:14 :: [i586] #100 openscada-UI.VCAEngine: install check OK
2013-Dec-26 21:13:15 :: [x86_64] #100 openscada-UI.WebCfgD: install check OK
2013-Dec-26 21:13:29 :: [x86_64] #100 openscada-UI.WebUser: install check OK
2013-Dec-26 21:13:30 :: [i586] #100 openscada-UI.Vision: install check OK
2013-Dec-26 21:13:42 :: [x86_64] #100 openscada-UI.WebVision: install check OK
2013-Dec-26 21:13:44 :: [i586] #100 openscada-UI.WebCfg: install check OK
x86_64: openscada-core=0.8.0.9-alt0.M51.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2013-Dec-26 21:13:56 :: [x86_64] #100 openscada-core: install check OK
2013-Dec-26 21:13:57 :: [i586] #100 openscada-UI.WebCfgD: install check OK
x86_64: openscada-devel=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/include/openscada
2013-Dec-26 21:14:09 :: [x86_64] #100 openscada-devel: install check OK
2013-Dec-26 21:14:11 :: [i586] #100 openscada-UI.WebUser: install check OK
2013-Dec-26 21:14:25 :: [i586] #100 openscada-UI.WebVision: install check OK
2013-Dec-26 21:14:25 :: [x86_64] #100 openscada-docEN: install check OK
i586: openscada-core=0.8.0.9-alt0.M51.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2013-Dec-26 21:14:39 :: [i586] #100 openscada-core: install check OK
2013-Dec-26 21:14:41 :: [x86_64] #100 openscada-docRU: install check OK
2013-Dec-26 21:14:51 :: [x86_64] #100 openscada-docUK: install check OK
i586: openscada-devel=0.8.0.9-alt0.M51.1 post-install unowned files:
/usr/include/openscada
2013-Dec-26 21:14:53 :: [i586] #100 openscada-devel: install check OK
2013-Dec-26 21:15:05 :: [x86_64] #100 openscada-plc: install check OK
2013-Dec-26 21:15:10 :: [i586] #100 openscada-docEN: install check OK
2013-Dec-26 21:15:20 :: [x86_64] #100 openscada-server: install check OK
2013-Dec-26 21:15:29 :: [i586] #100 openscada-docRU: install check OK
2013-Dec-26 21:15:36 :: [x86_64] #100 openscada-visStation: install check OK
2013-Dec-26 21:15:39 :: [i586] #100 openscada-docUK: install check OK
2013-Dec-26 21:15:54 :: [i586] #100 openscada-plc: install check OK
2013-Dec-26 21:16:09 :: [i586] #100 openscada-server: install check OK
2013-Dec-26 21:16:27 :: [i586] #100 openscada-visStation: install check OK
2013-Dec-26 21:16:28 :: gears inheritance check OK
2013-Dec-26 21:16:28 :: srpm inheritance check OK
girar-check-perms: access to openscada ALLOWED for rom_as: project leader
2013-Dec-26 21:16:28 :: acl check OK
2013-Dec-26 21:16:40 :: created contents_index files
2013-Dec-26 21:16:44 :: created hash files: i586 noarch src x86_64
2013-Dec-26 21:16:48 :: task #111064 for 5.1 TESTED
2013-Dec-26 21:16:48 :: task is ready for commit
2013-Dec-26 21:17:03 :: repo clone OK
2013-Dec-26 21:17:11 :: packages update OK
2013-Dec-26 21:17:15 :: [i586 x86_64 noarch] update OK
2013-Dec-26 21:17:15 :: repo update OK
2013-Dec-26 21:17:19 :: repo save OK
2013-Dec-26 21:17:23 :: updated /gears/o/openscada.git branch `5.1'
2013-Dec-26 21:18:50 :: gears update OK
2013-Dec-26 21:18:50 :: task #111064 for 5.1 DONE
More information about the Sisyphus-incominger
mailing list