[#84344] t6 DONE openscada.git=0.8.0.4-alt0.M60T.1
Girar Builder robot
girar-builder at altlinux.org
Tue Nov 13 22:28:13 MSK 2012
http://git.altlinux.org/tasks/archive/done/_82/84344/logs/events.1.1.log
2012-Nov-13 17:20:49 :: task #84344 for t6 started by rom_as:
#100 build 0.8.0.4-alt0.M60T.1 from /people/rom_as/packages/openscada.git
2012-Nov-13 17:20:49 :: [x86_64] #100 openscada.git 0.8.0.4-alt0.M60T.1: build start
2012-Nov-13 17:20:49 :: [i586] #100 openscada.git 0.8.0.4-alt0.M60T.1: build start
build/100/x86_64/log:debuginfo.req: WARNING: /usr/lib64/libportaudio.so.2 is not yet debuginfo-enabled
2012-Nov-13 17:40:09 :: [x86_64] #100 openscada.git 0.8.0.4-alt0.M60T.1: build OK
build/100/i586/log:debuginfo.req: WARNING: /usr/lib/libportaudio.so.2 is not yet debuginfo-enabled
2012-Nov-13 17:43:12 :: [i586] #100 openscada.git 0.8.0.4-alt0.M60T.1: build OK
2012-Nov-13 17:44:06 :: build check OK
2012-Nov-13 17:44:40 :: noarch check OK
2012-Nov-13 17:44:41 :: plan: src +1 -1 =12562, i586 +84 -84 =20783, noarch +8 -8 =11676, x86_64 +80 -80 =20667
2012-Nov-13 17:44:41 :: version check OK
2012-Nov-13 17:48:19 :: created next repo
2012-Nov-13 17:48:30 :: dependencies check OK
2012-Nov-13 17:49:50 :: ELF symbols check OK
2012-Nov-13 17:50:21 :: [x86_64] #100 openscada: install check OK
2012-Nov-13 17:50:21 :: [i586] #100 openscada: install check OK
i586: openscada-Archive.DBArch=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 17:50:41 :: [i586] #100 openscada-Archive.DBArch: install check OK
x86_64: openscada-Archive.DBArch=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 17:50:43 :: [x86_64] #100 openscada-Archive.DBArch: install check OK
2012-Nov-13 17:51:05 :: [i586] #100 openscada-Archive.DBArch-debuginfo: install check OK
2012-Nov-13 17:51:06 :: [x86_64] #100 openscada-Archive.DBArch-debuginfo: install check OK
i586: openscada-Archive.FSArch=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
x86_64: openscada-Archive.FSArch=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 17:51:26 :: [i586] #100 openscada-Archive.FSArch: install check OK
2012-Nov-13 17:51:26 :: [x86_64] #100 openscada-Archive.FSArch: install check OK
2012-Nov-13 17:51:49 :: [x86_64] #100 openscada-Archive.FSArch-debuginfo: install check OK
2012-Nov-13 17:51:50 :: [i586] #100 openscada-Archive.FSArch-debuginfo: install check OK
x86_64: openscada-DAQ.BFN=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 17:52:08 :: [x86_64] #100 openscada-DAQ.BFN: install check OK
i586: openscada-DAQ.BFN=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 17:52:11 :: [i586] #100 openscada-DAQ.BFN: install check OK
2012-Nov-13 17:52:31 :: [x86_64] #100 openscada-DAQ.BFN-debuginfo: install check OK
2012-Nov-13 17:52:34 :: [i586] #100 openscada-DAQ.BFN-debuginfo: install check OK
x86_64: openscada-DAQ.BlockCalc=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 17:52:52 :: [x86_64] #100 openscada-DAQ.BlockCalc: install check OK
i586: openscada-DAQ.BlockCalc=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 17:52:55 :: [i586] #100 openscada-DAQ.BlockCalc: install check OK
2012-Nov-13 17:53:15 :: [x86_64] #100 openscada-DAQ.BlockCalc-debuginfo: install check OK
2012-Nov-13 17:53:18 :: [i586] #100 openscada-DAQ.BlockCalc-debuginfo: install check OK
x86_64: openscada-DAQ.DAQGate=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 17:53:35 :: [x86_64] #100 openscada-DAQ.DAQGate: install check OK
i586: openscada-DAQ.DAQGate=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 17:53:38 :: [i586] #100 openscada-DAQ.DAQGate: install check OK
2012-Nov-13 17:53:57 :: [x86_64] #100 openscada-DAQ.DAQGate-debuginfo: install check OK
2012-Nov-13 17:54:01 :: [i586] #100 openscada-DAQ.DAQGate-debuginfo: install check OK
x86_64: openscada-DAQ.DCON=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 17:54:17 :: [x86_64] #100 openscada-DAQ.DCON: install check OK
i586: openscada-DAQ.DCON=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 17:54:22 :: [i586] #100 openscada-DAQ.DCON: install check OK
2012-Nov-13 17:54:40 :: [x86_64] #100 openscada-DAQ.DCON-debuginfo: install check OK
2012-Nov-13 17:54:45 :: [i586] #100 openscada-DAQ.DCON-debuginfo: install check OK
x86_64: openscada-DAQ.JavaLikeCalc=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 17:55:00 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc: install check OK
i586: openscada-DAQ.DiamondBoards=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 17:55:05 :: [i586] #100 openscada-DAQ.DiamondBoards: install check OK
2012-Nov-13 17:55:22 :: [x86_64] #100 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
2012-Nov-13 17:55:29 :: [i586] #100 openscada-DAQ.DiamondBoards-debuginfo: install check OK
x86_64: openscada-DAQ.LogicLev=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 17:55:43 :: [x86_64] #100 openscada-DAQ.LogicLev: install check OK
i586: openscada-DAQ.ICP_DAS=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 17:55:49 :: [i586] #100 openscada-DAQ.ICP_DAS: install check OK
2012-Nov-13 17:56:05 :: [x86_64] #100 openscada-DAQ.LogicLev-debuginfo: install check OK
2012-Nov-13 17:56:12 :: [i586] #100 openscada-DAQ.ICP_DAS-debuginfo: install check OK
x86_64: openscada-DAQ.ModBus=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 17:56:25 :: [x86_64] #100 openscada-DAQ.ModBus: install check OK
i586: openscada-DAQ.JavaLikeCalc=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 17:56:32 :: [i586] #100 openscada-DAQ.JavaLikeCalc: install check OK
2012-Nov-13 17:56:47 :: [x86_64] #100 openscada-DAQ.ModBus-debuginfo: install check OK
2012-Nov-13 17:56:55 :: [i586] #100 openscada-DAQ.JavaLikeCalc-debuginfo: install check OK
x86_64: openscada-DAQ.OPC_UA=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 17:57:06 :: [x86_64] #100 openscada-DAQ.OPC_UA: install check OK
i586: openscada-DAQ.LogicLev=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 17:57:15 :: [i586] #100 openscada-DAQ.LogicLev: install check OK
2012-Nov-13 17:57:29 :: [x86_64] #100 openscada-DAQ.OPC_UA-debuginfo: install check OK
2012-Nov-13 17:57:38 :: [i586] #100 openscada-DAQ.LogicLev-debuginfo: install check OK
x86_64: openscada-DAQ.SNMP=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 17:57:49 :: [x86_64] #100 openscada-DAQ.SNMP: install check OK
i586: openscada-DAQ.ModBus=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 17:57:59 :: [i586] #100 openscada-DAQ.ModBus: install check OK
2012-Nov-13 17:58:14 :: [x86_64] #100 openscada-DAQ.SNMP-debuginfo: install check OK
2012-Nov-13 17:58:22 :: [i586] #100 openscada-DAQ.ModBus-debuginfo: install check OK
x86_64: openscada-DAQ.Siemens=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 17:58:33 :: [x86_64] #100 openscada-DAQ.Siemens: install check OK
i586: openscada-DAQ.OPC_UA=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 17:58:42 :: [i586] #100 openscada-DAQ.OPC_UA: install check OK
2012-Nov-13 17:58:56 :: [x86_64] #100 openscada-DAQ.Siemens-debuginfo: install check OK
2012-Nov-13 17:59:06 :: [i586] #100 openscada-DAQ.OPC_UA-debuginfo: install check OK
x86_64: openscada-DAQ.SoundCard=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 17:59:16 :: [x86_64] #100 openscada-DAQ.SoundCard: install check OK
i586: openscada-DAQ.SNMP=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 17:59:27 :: [i586] #100 openscada-DAQ.SNMP: install check OK
2012-Nov-13 17:59:39 :: [x86_64] #100 openscada-DAQ.SoundCard-debuginfo: install check OK
2012-Nov-13 17:59:53 :: [i586] #100 openscada-DAQ.SNMP-debuginfo: install check OK
x86_64: openscada-DAQ.System=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 17:59:59 :: [x86_64] #100 openscada-DAQ.System: install check OK
i586: openscada-DAQ.Siemens=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:00:13 :: [i586] #100 openscada-DAQ.Siemens: install check OK
2012-Nov-13 18:00:22 :: [x86_64] #100 openscada-DAQ.System-debuginfo: install check OK
2012-Nov-13 18:00:36 :: [i586] #100 openscada-DAQ.Siemens-debuginfo: install check OK
x86_64: openscada-DB.DBF=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:00:42 :: [x86_64] #100 openscada-DB.DBF: install check OK
i586: openscada-DAQ.SoundCard=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:00:57 :: [i586] #100 openscada-DAQ.SoundCard: install check OK
2012-Nov-13 18:01:05 :: [x86_64] #100 openscada-DB.DBF-debuginfo: install check OK
2012-Nov-13 18:01:20 :: [i586] #100 openscada-DAQ.SoundCard-debuginfo: install check OK
x86_64: openscada-DB.FireBird=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:01:25 :: [x86_64] #100 openscada-DB.FireBird: install check OK
i586: openscada-DAQ.System=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:01:41 :: [i586] #100 openscada-DAQ.System: install check OK
2012-Nov-13 18:01:47 :: [x86_64] #100 openscada-DB.FireBird-debuginfo: install check OK
2012-Nov-13 18:02:04 :: [i586] #100 openscada-DAQ.System-debuginfo: install check OK
x86_64: openscada-DB.MySQL=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:02:07 :: [x86_64] #100 openscada-DB.MySQL: install check OK
i586: openscada-DB.DBF=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:02:24 :: [i586] #100 openscada-DB.DBF: install check OK
2012-Nov-13 18:02:31 :: [x86_64] #100 openscada-DB.MySQL-debuginfo: install check OK
2012-Nov-13 18:02:48 :: [i586] #100 openscada-DB.DBF-debuginfo: install check OK
x86_64: openscada-DB.PostgreSQL=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:02:51 :: [x86_64] #100 openscada-DB.PostgreSQL: install check OK
i586: openscada-DB.FireBird=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:03:09 :: [i586] #100 openscada-DB.FireBird: install check OK
2012-Nov-13 18:03:15 :: [x86_64] #100 openscada-DB.PostgreSQL-debuginfo: install check OK
2012-Nov-13 18:03:33 :: [i586] #100 openscada-DB.FireBird-debuginfo: install check OK
x86_64: openscada-DB.SQLite=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:03:35 :: [x86_64] #100 openscada-DB.SQLite: install check OK
i586: openscada-DB.MySQL=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:03:53 :: [i586] #100 openscada-DB.MySQL: install check OK
2012-Nov-13 18:03:58 :: [x86_64] #100 openscada-DB.SQLite-debuginfo: install check OK
x86_64: openscada-LibDB.Main=0.8.0.4-alt0.M60T.1 post-install unowned files:
/var/spool/openscada/LibsDB
2012-Nov-13 18:04:17 :: [i586] #100 openscada-DB.MySQL-debuginfo: install check OK
2012-Nov-13 18:04:18 :: [x86_64] #100 openscada-LibDB.Main: install check OK
x86_64: openscada-LibDB.VCA=0.8.0.4-alt0.M60T.1 post-install unowned files:
/var/spool/openscada/LibsDB
i586: openscada-DB.PostgreSQL=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:04:39 :: [x86_64] #100 openscada-LibDB.VCA: install check OK
2012-Nov-13 18:04:39 :: [i586] #100 openscada-DB.PostgreSQL: install check OK
x86_64: openscada-Model.AGLKS=0.8.0.4-alt0.M60T.1 post-install unowned files:
/var/spool/openscada/AGLKS
2012-Nov-13 18:05:01 :: [x86_64] #100 openscada-Model.AGLKS: install check OK
2012-Nov-13 18:05:04 :: [i586] #100 openscada-DB.PostgreSQL-debuginfo: install check OK
x86_64: openscada-Model.Boiler=0.8.0.4-alt0.M60T.1 post-install unowned files:
/var/spool/openscada/Boiler
2012-Nov-13 18:05:23 :: [x86_64] #100 openscada-Model.Boiler: install check OK
i586: openscada-DB.SQLite=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:05:26 :: [i586] #100 openscada-DB.SQLite: install check OK
x86_64: openscada-Protocol.HTTP=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:05:42 :: [x86_64] #100 openscada-Protocol.HTTP: install check OK
2012-Nov-13 18:05:49 :: [i586] #100 openscada-DB.SQLite-debuginfo: install check OK
2012-Nov-13 18:06:05 :: [x86_64] #100 openscada-Protocol.HTTP-debuginfo: install check OK
i586: openscada-LibDB.Main=0.8.0.4-alt0.M60T.1 post-install unowned files:
/var/spool/openscada/LibsDB
2012-Nov-13 18:06:10 :: [i586] #100 openscada-LibDB.Main: install check OK
x86_64: openscada-Protocol.SelfSystem=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:06:26 :: [x86_64] #100 openscada-Protocol.SelfSystem: install check OK
i586: openscada-LibDB.VCA=0.8.0.4-alt0.M60T.1 post-install unowned files:
/var/spool/openscada/LibsDB
2012-Nov-13 18:06:31 :: [i586] #100 openscada-LibDB.VCA: install check OK
2012-Nov-13 18:06:49 :: [x86_64] #100 openscada-Protocol.SelfSystem-debuginfo: install check OK
i586: openscada-Model.AGLKS=0.8.0.4-alt0.M60T.1 post-install unowned files:
/var/spool/openscada/AGLKS
2012-Nov-13 18:06:55 :: [i586] #100 openscada-Model.AGLKS: install check OK
x86_64: openscada-Protocol.UserProtocol=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:07:09 :: [x86_64] #100 openscada-Protocol.UserProtocol: install check OK
i586: openscada-Model.Boiler=0.8.0.4-alt0.M60T.1 post-install unowned files:
/var/spool/openscada/Boiler
2012-Nov-13 18:07:18 :: [i586] #100 openscada-Model.Boiler: install check OK
2012-Nov-13 18:07:32 :: [x86_64] #100 openscada-Protocol.UserProtocol-debuginfo: install check OK
i586: openscada-Protocol.HTTP=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:07:38 :: [i586] #100 openscada-Protocol.HTTP: install check OK
x86_64: openscada-Special.FLibComplex1=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:07:52 :: [x86_64] #100 openscada-Special.FLibComplex1: install check OK
2012-Nov-13 18:08:01 :: [i586] #100 openscada-Protocol.HTTP-debuginfo: install check OK
2012-Nov-13 18:08:14 :: [x86_64] #100 openscada-Special.FLibComplex1-debuginfo: install check OK
i586: openscada-Protocol.SelfSystem=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:08:22 :: [i586] #100 openscada-Protocol.SelfSystem: install check OK
x86_64: openscada-Special.FLibMath=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:08:34 :: [x86_64] #100 openscada-Special.FLibMath: install check OK
2012-Nov-13 18:08:45 :: [i586] #100 openscada-Protocol.SelfSystem-debuginfo: install check OK
2012-Nov-13 18:08:57 :: [x86_64] #100 openscada-Special.FLibMath-debuginfo: install check OK
i586: openscada-Protocol.UserProtocol=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:09:05 :: [i586] #100 openscada-Protocol.UserProtocol: install check OK
x86_64: openscada-Special.FLibSYS=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:09:17 :: [x86_64] #100 openscada-Special.FLibSYS: install check OK
2012-Nov-13 18:09:28 :: [i586] #100 openscada-Protocol.UserProtocol-debuginfo: install check OK
2012-Nov-13 18:09:39 :: [x86_64] #100 openscada-Special.FLibSYS-debuginfo: install check OK
i586: openscada-Special.FLibComplex1=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:09:49 :: [i586] #100 openscada-Special.FLibComplex1: install check OK
x86_64: openscada-Special.SystemTests=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:09:59 :: [x86_64] #100 openscada-Special.SystemTests: install check OK
2012-Nov-13 18:10:12 :: [i586] #100 openscada-Special.FLibComplex1-debuginfo: install check OK
2012-Nov-13 18:10:22 :: [x86_64] #100 openscada-Special.SystemTests-debuginfo: install check OK
i586: openscada-Special.FLibMath=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:10:33 :: [i586] #100 openscada-Special.FLibMath: install check OK
x86_64: openscada-Transport.SSL=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:10:42 :: [x86_64] #100 openscada-Transport.SSL: install check OK
2012-Nov-13 18:10:55 :: [i586] #100 openscada-Special.FLibMath-debuginfo: install check OK
2012-Nov-13 18:11:05 :: [x86_64] #100 openscada-Transport.SSL-debuginfo: install check OK
i586: openscada-Special.FLibSYS=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:11:15 :: [i586] #100 openscada-Special.FLibSYS: install check OK
x86_64: openscada-Transport.Serial=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:11:25 :: [x86_64] #100 openscada-Transport.Serial: install check OK
2012-Nov-13 18:11:40 :: [i586] #100 openscada-Special.FLibSYS-debuginfo: install check OK
2012-Nov-13 18:11:47 :: [x86_64] #100 openscada-Transport.Serial-debuginfo: install check OK
i586: openscada-Special.SystemTests=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:12:01 :: [i586] #100 openscada-Special.SystemTests: install check OK
x86_64: openscada-Transport.Sockets=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:12:08 :: [x86_64] #100 openscada-Transport.Sockets: install check OK
2012-Nov-13 18:12:24 :: [i586] #100 openscada-Special.SystemTests-debuginfo: install check OK
2012-Nov-13 18:12:30 :: [x86_64] #100 openscada-Transport.Sockets-debuginfo: install check OK
i586: openscada-Transport.SSL=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:12:44 :: [i586] #100 openscada-Transport.SSL: install check OK
2012-Nov-13 18:12:51 :: [x86_64] #100 openscada-UI.QTCfg: install check OK
2012-Nov-13 18:13:08 :: [i586] #100 openscada-Transport.SSL-debuginfo: install check OK
2012-Nov-13 18:13:20 :: [x86_64] #100 openscada-UI.QTCfg-debuginfo: install check OK
i586: openscada-Transport.Serial=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:13:29 :: [i586] #100 openscada-Transport.Serial: install check OK
x86_64: openscada-UI.QTStarter=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:13:43 :: [x86_64] #100 openscada-UI.QTStarter: install check OK
2012-Nov-13 18:13:52 :: [i586] #100 openscada-Transport.Serial-debuginfo: install check OK
2012-Nov-13 18:14:11 :: [x86_64] #100 openscada-UI.QTStarter-debuginfo: install check OK
i586: openscada-Transport.Sockets=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:14:13 :: [i586] #100 openscada-Transport.Sockets: install check OK
x86_64: openscada-UI.VCAEngine=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib64/openscada
2012-Nov-13 18:14:32 :: [x86_64] #100 openscada-UI.VCAEngine: install check OK
2012-Nov-13 18:14:36 :: [i586] #100 openscada-Transport.Sockets-debuginfo: install check OK
2012-Nov-13 18:14:53 :: [x86_64] #100 openscada-UI.VCAEngine-debuginfo: install check OK
2012-Nov-13 18:14:58 :: [i586] #100 openscada-UI.QTCfg: install check OK
2012-Nov-13 18:15:16 :: [x86_64] #100 openscada-UI.Vision: install check OK
2012-Nov-13 18:15:30 :: [i586] #100 openscada-UI.QTCfg-debuginfo: install check OK
2012-Nov-13 18:15:48 :: [x86_64] #100 openscada-UI.Vision-debuginfo: install check OK
i586: openscada-UI.QTStarter=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:15:52 :: [i586] #100 openscada-UI.QTStarter: install check OK
2012-Nov-13 18:16:10 :: [x86_64] #100 openscada-UI.WebCfg: install check OK
2012-Nov-13 18:16:23 :: [i586] #100 openscada-UI.QTStarter-debuginfo: install check OK
2012-Nov-13 18:16:34 :: [x86_64] #100 openscada-UI.WebCfg-debuginfo: install check OK
i586: openscada-UI.VCAEngine=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/lib/openscada
2012-Nov-13 18:16:44 :: [i586] #100 openscada-UI.VCAEngine: install check OK
2012-Nov-13 18:16:54 :: [x86_64] #100 openscada-UI.WebCfgD: install check OK
2012-Nov-13 18:17:07 :: [i586] #100 openscada-UI.VCAEngine-debuginfo: install check OK
2012-Nov-13 18:17:17 :: [x86_64] #100 openscada-UI.WebCfgD-debuginfo: install check OK
2012-Nov-13 18:17:30 :: [i586] #100 openscada-UI.Vision: install check OK
2012-Nov-13 18:17:37 :: [x86_64] #100 openscada-UI.WebUser: install check OK
2012-Nov-13 18:17:59 :: [x86_64] #100 openscada-UI.WebUser-debuginfo: install check OK
2012-Nov-13 18:18:04 :: [i586] #100 openscada-UI.Vision-debuginfo: install check OK
2012-Nov-13 18:18:19 :: [x86_64] #100 openscada-UI.WebVision: install check OK
2012-Nov-13 18:18:24 :: [i586] #100 openscada-UI.WebCfg: install check OK
2012-Nov-13 18:18:42 :: [x86_64] #100 openscada-UI.WebVision-debuginfo: install check OK
2012-Nov-13 18:18:48 :: [i586] #100 openscada-UI.WebCfg-debuginfo: install check OK
x86_64: openscada-core=0.8.0.4-alt0.M60T.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2012-Nov-13 18:19:02 :: [x86_64] #100 openscada-core: install check OK
2012-Nov-13 18:19:08 :: [i586] #100 openscada-UI.WebCfgD: install check OK
2012-Nov-13 18:19:25 :: [x86_64] #100 openscada-core-debuginfo: install check OK
2012-Nov-13 18:19:31 :: [i586] #100 openscada-UI.WebCfgD-debuginfo: install check OK
x86_64: openscada-devel=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/include/openscada
2012-Nov-13 18:19:45 :: [x86_64] #100 openscada-devel: install check OK
2012-Nov-13 18:19:51 :: [i586] #100 openscada-UI.WebUser: install check OK
2012-Nov-13 18:20:05 :: [x86_64] #100 openscada-docEN: install check OK
2012-Nov-13 18:20:15 :: [i586] #100 openscada-UI.WebUser-debuginfo: install check OK
2012-Nov-13 18:20:25 :: [x86_64] #100 openscada-docRU: install check OK
2012-Nov-13 18:20:36 :: [i586] #100 openscada-UI.WebVision: install check OK
2012-Nov-13 18:20:39 :: [x86_64] #100 openscada-docUK: install check OK
2012-Nov-13 18:20:59 :: [x86_64] #100 openscada-plc: install check OK
2012-Nov-13 18:21:00 :: [i586] #100 openscada-UI.WebVision-debuginfo: install check OK
i586: openscada-core=0.8.0.4-alt0.M60T.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2012-Nov-13 18:21:20 :: [x86_64] #100 openscada-server: install check OK
2012-Nov-13 18:21:21 :: [i586] #100 openscada-core: install check OK
2012-Nov-13 18:21:42 :: [x86_64] #100 openscada-visStation: install check OK
2012-Nov-13 18:21:45 :: [i586] #100 openscada-core-debuginfo: install check OK
i586: openscada-devel=0.8.0.4-alt0.M60T.1 post-install unowned files:
/usr/include/openscada
2012-Nov-13 18:22:07 :: [i586] #100 openscada-devel: install check OK
2012-Nov-13 18:22:26 :: [i586] #100 openscada-docEN: install check OK
2012-Nov-13 18:22:48 :: [i586] #100 openscada-docRU: install check OK
2012-Nov-13 18:23:02 :: [i586] #100 openscada-docUK: install check OK
2012-Nov-13 18:23:23 :: [i586] #100 openscada-plc: install check OK
2012-Nov-13 18:23:44 :: [i586] #100 openscada-server: install check OK
2012-Nov-13 18:24:08 :: [i586] #100 openscada-visStation: install check OK
2012-Nov-13 18:24:10 :: [x86_64-i586] plan: #41 +41 -41 =7688
2012-Nov-13 18:25:52 :: [x86_64-i586] arepo build OK
2012-Nov-13 18:26:25 :: [x86_64-i586] created next repo
2012-Nov-13 18:26:31 :: [x86_64-i586] dependencies check OK
2012-Nov-13 18:26:31 :: gears inheritance check OK
2012-Nov-13 18:26:31 :: srpm inheritance check OK
girar-check-perms: access to openscada ALLOWED for rom_as: project leader
2012-Nov-13 18:26:31 :: acl check OK
2012-Nov-13 18:26:47 :: created contents_index files
2012-Nov-13 18:26:50 :: task #84344 for t6 TESTED
2012-Nov-13 18:26:50 :: task is ready for commit
2012-Nov-13 18:27:33 :: repo clone OK
2012-Nov-13 18:27:45 :: packages update OK
2012-Nov-13 18:27:48 :: [i586 x86_64 noarch] update OK
2012-Nov-13 18:27:51 :: [x86_64-i586] update OK
2012-Nov-13 18:27:55 :: repo update OK
2012-Nov-13 18:28:00 :: repo save OK
2012-Nov-13 18:28:00 :: updated /gears/o/openscada.git branch `t6'
2012-Nov-13 18:28:12 :: gears update OK
2012-Nov-13 18:28:12 :: task #84344 for t6 DONE
More information about the Sisyphus-incominger
mailing list