[#42752] 5.1 DONE openscada.git=openscada-0.7.1-alt0.M51.1
Girar Builder robot
girar-builder at altlinux.org
Thu Apr 14 21:12:11 UTC 2011
http://git.altlinux.org/tasks/archive/done/_41/42752/task/log.1.1
2011-Apr-15 00:30:16 :: task #42752 for 5.1 started by rom_as:
#100 build openscada-0.7.1-alt0.M51.1 from /people/rom_as/packages/openscada.git
2011-Apr-15 00:30:17 :: cloned 5.1
2011-Apr-15 00:30:18 :: [i586] #100 openscada.git openscada-0.7.1-alt0.M51.1: build start
2011-Apr-15 00:30:18 :: [x86_64] #100 openscada.git openscada-0.7.1-alt0.M51.1: build start
2011-Apr-15 00:50:27 :: [i586] #100 openscada.git openscada-0.7.1-alt0.M51.1: build OK
2011-Apr-15 00:52:09 :: [x86_64] #100 openscada.git openscada-0.7.1-alt0.M51.1: build OK
rpmquery: db4db_put: db_put x86_64: Cannot allocate memory
2011-Apr-15 00:52:53 :: build check OK
2011-Apr-15 00:53:24 :: noarch check OK
2011-Apr-15 00:53:25 :: version check OK
2011-Apr-15 00:54:22 :: created test repo
2011-Apr-15 00:54:24 :: dependencies check OK
2011-Apr-15 00:56:24 :: ELF symbols check OK
2011-Apr-15 00:56:46 :: [i586] openscada: install check OK
2011-Apr-15 00:56:46 :: [x86_64] openscada: install check OK
i586: openscada-Archive.DBArch=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 00:56:59 :: [i586] openscada-Archive.DBArch: install check OK
x86_64: openscada-Archive.DBArch=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 00:57:00 :: [x86_64] openscada-Archive.DBArch: install check OK
i586: openscada-Archive.FSArch=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 00:57:12 :: [i586] openscada-Archive.FSArch: install check OK
x86_64: openscada-Archive.FSArch=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 00:57:14 :: [x86_64] openscada-Archive.FSArch: install check OK
i586: openscada-DAQ.BFN=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 00:57:25 :: [i586] openscada-DAQ.BFN: install check OK
x86_64: openscada-DAQ.BFN=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 00:57:27 :: [x86_64] openscada-DAQ.BFN: install check OK
i586: openscada-DAQ.BlockCalc=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 00:57:38 :: [i586] openscada-DAQ.BlockCalc: install check OK
x86_64: openscada-DAQ.BlockCalc=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 00:57:40 :: [x86_64] openscada-DAQ.BlockCalc: install check OK
i586: openscada-DAQ.DAQGate=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 00:57:51 :: [i586] openscada-DAQ.DAQGate: install check OK
x86_64: openscada-DAQ.DAQGate=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 00:57:53 :: [x86_64] openscada-DAQ.DAQGate: install check OK
i586: openscada-DAQ.DCON=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 00:58:04 :: [i586] openscada-DAQ.DCON: install check OK
x86_64: openscada-DAQ.DCON=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 00:58:07 :: [x86_64] openscada-DAQ.DCON: install check OK
i586: openscada-DAQ.DiamondBoards=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 00:58:17 :: [i586] openscada-DAQ.DiamondBoards: install check OK
x86_64: openscada-DAQ.JavaLikeCalc=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 00:58:20 :: [x86_64] openscada-DAQ.JavaLikeCalc: install check OK
i586: openscada-DAQ.ICP_DAS=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 00:58:30 :: [i586] openscada-DAQ.ICP_DAS: install check OK
x86_64: openscada-DAQ.LogicLev=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 00:58:34 :: [x86_64] openscada-DAQ.LogicLev: install check OK
i586: openscada-DAQ.JavaLikeCalc=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 00:58:42 :: [i586] openscada-DAQ.JavaLikeCalc: install check OK
x86_64: openscada-DAQ.ModBus=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 00:58:48 :: [x86_64] openscada-DAQ.ModBus: install check OK
i586: openscada-DAQ.LogicLev=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 00:58:55 :: [i586] openscada-DAQ.LogicLev: install check OK
x86_64: openscada-DAQ.OPC_UA=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 00:59:01 :: [x86_64] openscada-DAQ.OPC_UA: install check OK
i586: openscada-DAQ.ModBus=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 00:59:09 :: [i586] openscada-DAQ.ModBus: install check OK
x86_64: openscada-DAQ.SNMP=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 00:59:14 :: [x86_64] openscada-DAQ.SNMP: install check OK
i586: openscada-DAQ.OPC_UA=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 00:59:22 :: [i586] openscada-DAQ.OPC_UA: install check OK
x86_64: openscada-DAQ.Siemens=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 00:59:27 :: [x86_64] openscada-DAQ.Siemens: install check OK
i586: openscada-DAQ.SNMP=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 00:59:35 :: [i586] openscada-DAQ.SNMP: install check OK
x86_64: openscada-DAQ.SoundCard=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 00:59:41 :: [x86_64] openscada-DAQ.SoundCard: install check OK
i586: openscada-DAQ.Siemens=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 00:59:48 :: [i586] openscada-DAQ.Siemens: install check OK
x86_64: openscada-DAQ.System=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 00:59:55 :: [x86_64] openscada-DAQ.System: install check OK
i586: openscada-DAQ.SoundCard=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:00:02 :: [i586] openscada-DAQ.SoundCard: install check OK
x86_64: openscada-DB.DBF=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:00:08 :: [x86_64] openscada-DB.DBF: install check OK
i586: openscada-DAQ.System=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:00:15 :: [i586] openscada-DAQ.System: install check OK
x86_64: openscada-DB.FireBird=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:00:22 :: [x86_64] openscada-DB.FireBird: install check OK
i586: openscada-DB.DBF=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:00:28 :: [i586] openscada-DB.DBF: install check OK
x86_64: openscada-DB.MySQL=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:00:35 :: [x86_64] openscada-DB.MySQL: install check OK
i586: openscada-DB.FireBird=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:00:41 :: [i586] openscada-DB.FireBird: install check OK
x86_64: openscada-DB.PostgreSQL=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:00:50 :: [x86_64] openscada-DB.PostgreSQL: install check OK
i586: openscada-DB.MySQL=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:00:55 :: [i586] openscada-DB.MySQL: install check OK
x86_64: openscada-DB.SQLite=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:01:04 :: [x86_64] openscada-DB.SQLite: install check OK
i586: openscada-DB.PostgreSQL=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:01:08 :: [i586] openscada-DB.PostgreSQL: install check OK
x86_64: openscada-LibDB.Main=0.7.1-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2011-Apr-15 01:01:21 :: [x86_64] openscada-LibDB.Main: install check OK
i586: openscada-DB.SQLite=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:01:21 :: [i586] openscada-DB.SQLite: install check OK
x86_64: openscada-LibDB.VCA=0.7.1-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2011-Apr-15 01:01:37 :: [x86_64] openscada-LibDB.VCA: install check OK
i586: openscada-LibDB.Main=0.7.1-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2011-Apr-15 01:01:38 :: [i586] openscada-LibDB.Main: install check OK
x86_64: openscada-Model.AGLKS=0.7.1-alt0.M51.1 post-install unowned files:
/var/spool/openscada/AGLKS
2011-Apr-15 01:01:54 :: [x86_64] openscada-Model.AGLKS: install check OK
i586: openscada-LibDB.VCA=0.7.1-alt0.M51.1 post-install unowned files:
/var/spool/openscada/LibsDB
2011-Apr-15 01:01:56 :: [i586] openscada-LibDB.VCA: install check OK
x86_64: openscada-Model.Boiler=0.7.1-alt0.M51.1 post-install unowned files:
/var/spool/openscada/Boiler
2011-Apr-15 01:02:12 :: [x86_64] openscada-Model.Boiler: install check OK
i586: openscada-Model.AGLKS=0.7.1-alt0.M51.1 post-install unowned files:
/var/spool/openscada/AGLKS
2011-Apr-15 01:02:16 :: [i586] openscada-Model.AGLKS: install check OK
x86_64: openscada-Protocol.HTTP=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:02:27 :: [x86_64] openscada-Protocol.HTTP: install check OK
i586: openscada-Model.Boiler=0.7.1-alt0.M51.1 post-install unowned files:
/var/spool/openscada/Boiler
2011-Apr-15 01:02:34 :: [i586] openscada-Model.Boiler: install check OK
x86_64: openscada-Protocol.SelfSystem=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:02:40 :: [x86_64] openscada-Protocol.SelfSystem: install check OK
i586: openscada-Protocol.HTTP=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:02:47 :: [i586] openscada-Protocol.HTTP: install check OK
x86_64: openscada-Protocol.UserProtocol=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:02:54 :: [x86_64] openscada-Protocol.UserProtocol: install check OK
i586: openscada-Protocol.SelfSystem=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:03:00 :: [i586] openscada-Protocol.SelfSystem: install check OK
x86_64: openscada-Special.FLibComplex1=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:03:07 :: [x86_64] openscada-Special.FLibComplex1: install check OK
i586: openscada-Protocol.UserProtocol=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:03:14 :: [i586] openscada-Protocol.UserProtocol: install check OK
x86_64: openscada-Special.FLibMath=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:03:21 :: [x86_64] openscada-Special.FLibMath: install check OK
i586: openscada-Special.FLibComplex1=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:03:27 :: [i586] openscada-Special.FLibComplex1: install check OK
x86_64: openscada-Special.FLibSYS=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:03:34 :: [x86_64] openscada-Special.FLibSYS: install check OK
i586: openscada-Special.FLibMath=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:03:40 :: [i586] openscada-Special.FLibMath: install check OK
x86_64: openscada-Special.SystemTests=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:03:48 :: [x86_64] openscada-Special.SystemTests: install check OK
i586: openscada-Special.FLibSYS=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:03:53 :: [i586] openscada-Special.FLibSYS: install check OK
x86_64: openscada-Transport.SSL=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:04:02 :: [x86_64] openscada-Transport.SSL: install check OK
i586: openscada-Special.SystemTests=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:04:06 :: [i586] openscada-Special.SystemTests: install check OK
x86_64: openscada-Transport.Serial=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:04:16 :: [x86_64] openscada-Transport.Serial: install check OK
i586: openscada-Transport.SSL=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:04:19 :: [i586] openscada-Transport.SSL: install check OK
x86_64: openscada-Transport.Sockets=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:04:29 :: [x86_64] openscada-Transport.Sockets: install check OK
i586: openscada-Transport.Serial=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:04:32 :: [i586] openscada-Transport.Serial: install check OK
2011-Apr-15 01:04:43 :: [x86_64] openscada-UI.QTCfg: install check OK
i586: openscada-Transport.Sockets=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:04:45 :: [i586] openscada-Transport.Sockets: install check OK
x86_64: openscada-UI.QTStarter=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:04:58 :: [x86_64] openscada-UI.QTStarter: install check OK
2011-Apr-15 01:05:00 :: [i586] openscada-UI.QTCfg: install check OK
x86_64: openscada-UI.VCAEngine=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib64/openscada
2011-Apr-15 01:05:12 :: [x86_64] openscada-UI.VCAEngine: install check OK
i586: openscada-UI.QTStarter=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:05:15 :: [i586] openscada-UI.QTStarter: install check OK
2011-Apr-15 01:05:27 :: [x86_64] openscada-UI.Vision: install check OK
i586: openscada-UI.VCAEngine=0.7.1-alt0.M51.1 post-install unowned files:
/usr/lib/openscada
2011-Apr-15 01:05:28 :: [i586] openscada-UI.VCAEngine: install check OK
2011-Apr-15 01:05:41 :: [x86_64] openscada-UI.WebCfg: install check OK
2011-Apr-15 01:05:43 :: [i586] openscada-UI.Vision: install check OK
2011-Apr-15 01:05:55 :: [x86_64] openscada-UI.WebCfgD: install check OK
2011-Apr-15 01:05:56 :: [i586] openscada-UI.WebCfg: install check OK
2011-Apr-15 01:06:09 :: [i586] openscada-UI.WebCfgD: install check OK
2011-Apr-15 01:06:10 :: [x86_64] openscada-UI.WebUser: install check OK
2011-Apr-15 01:06:22 :: [i586] openscada-UI.WebUser: install check OK
2011-Apr-15 01:06:24 :: [x86_64] openscada-UI.WebVision: install check OK
2011-Apr-15 01:06:36 :: [i586] openscada-UI.WebVision: install check OK
x86_64: openscada-core=0.7.1-alt0.M51.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2011-Apr-15 01:06:38 :: [x86_64] openscada-core: install check OK
i586: openscada-core=0.7.1-alt0.M51.1 post-install unowned files:
/var/spool/openscada
/var/spool/openscada/ARCHIVES
/var/spool/openscada/ARCHIVES/MESS
/var/spool/openscada/ARCHIVES/VAL
/var/spool/openscada/DATA
/var/spool/openscada/icons
2011-Apr-15 01:06:50 :: [i586] openscada-core: install check OK
x86_64: openscada-devel=0.7.1-alt0.M51.1 post-install unowned files:
/usr/include/openscada
2011-Apr-15 01:06:51 :: [x86_64] openscada-devel: install check OK
i586: openscada-devel=0.7.1-alt0.M51.1 post-install unowned files:
/usr/include/openscada
2011-Apr-15 01:07:03 :: [i586] openscada-devel: install check OK
2011-Apr-15 01:07:06 :: [x86_64] openscada-docEN: install check OK
2011-Apr-15 01:07:19 :: [i586] openscada-docEN: install check OK
2011-Apr-15 01:07:20 :: [x86_64] openscada-docRU: install check OK
2011-Apr-15 01:07:30 :: [x86_64] openscada-docUK: install check OK
2011-Apr-15 01:07:37 :: [i586] openscada-docRU: install check OK
2011-Apr-15 01:07:44 :: [x86_64] openscada-plc: install check OK
2011-Apr-15 01:07:46 :: [i586] openscada-docUK: install check OK
2011-Apr-15 01:08:00 :: [x86_64] openscada-server: install check OK
2011-Apr-15 01:08:00 :: [i586] openscada-plc: install check OK
2011-Apr-15 01:08:15 :: [i586] openscada-server: install check OK
2011-Apr-15 01:08:17 :: [x86_64] openscada-visStation: install check OK
2011-Apr-15 01:08:33 :: [i586] openscada-visStation: install check OK
2011-Apr-15 01:08:33 :: gears inheritance check OK
openscada-0.7.1-alt0.M51.1.src.rpm: missing last changelog entry from openscada-0.7.0.2-alt1.M51.1.src.rpm:
* Thu Mar 03 2011 rom_as at altlinux 0.7.0.2-alt1.M51.1
2011-Apr-15 01:08:33 :: srpm inheritance check COND-OK
girar-check-perms: access to openscada ALLOWED for rom_as: project leader
2011-Apr-15 01:08:34 :: acl check OK
2011-Apr-15 01:08:34 :: task #42752 for 5.1 TESTED
2011-Apr-15 01:08:34 :: task is ready for commit
2011-Apr-15 01:08:44 :: packages update OK
2011-Apr-15 01:08:45 :: repo update OK
2011-Apr-15 01:09:27 :: contents_index update OK
2011-Apr-15 01:09:28 :: updated /gears/o/openscada.git branch `5.1'
2011-Apr-15 01:10:45 :: gears update OK
2011-Apr-15 01:12:10 :: task #42752 for 5.1 DONE
More information about the Sisyphus-incominger
mailing list