[cyber] I: Sisyphus-20250809 i586 beehive_status: +33 -27 (229)
ALT beekeeper
hiver на altlinux.org
Сб Авг 9 14:40:40 MSK 2025
33 NEW error logs
antlr4-project-4.9.2-alt1_1jpp11
[ERROR] Failed to execute goal on project
antlr4-runtime-test-annotation-processors: Could not resolve dependencies for
project org.antlr:antlr4-runtime-test-annotation-processors:jar:4.9.2: Cannot access
central (https://repo.maven.apache.org/maven2) in offline mode and the artifact
com.sun:tools:jar:0.1 has not been downloaded from it before. -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the
following articles:
[ERROR] [Help 1]
http://cwiki.apache.org/confluence/display/MAVEN/DependencyResolutionException
[ERROR]
[ERROR] After correcting the problems, you can resume the build with the command
[ERROR] mvn <args> -rf :antlr4-runtime-test-annotation-processors
apache-commons-daemon-1:1.4.1-alt1
checking JAVA_HOME... failed
configure: error: %{java_home} is not a directory
error: Bad exit status from /usr/src/tmp/rpm-tmp.46138 (%build)
diag-domain-client-0.5-alt1
default_run() {
^-- SC2329 (info): This function is never invoked. Check usage (or ignored if invoked
indirectly).
In diag-domain-client line 590:
list_run() {
^-- SC2329 (info): This function is never invoked. Check usage (or ignored if invoked
indirectly).
In diag-domain-client line 596:
custom_run() {
^-- SC2329 (info): This function is never invoked. Check usage (or ignored if invoked
indirectly).
For more information:
https://www.shellcheck.net/wiki/SC2329 -- This function is never invoked. C...
freemind-1.0.1-alt3
[mkdir] Created dir: /usr/src/RPM/BUILD/bin/classes
BUILD FAILED
/usr/src/RPM/BUILD/freemind/build.xml:158: Unable to find a javac compiler;
grex-1.4.5-alt1
running 45 tests
test matching_regexes_with_case_insensitive_matching_and_verbose_mode ... FAILED
test matching_regexes_with_case_insensitive_matching ... ok
--
thread 'matching_regexes_with_case_insensitive_matching_and_verbose_mode' panicked at
tests/property_tests.rs:23:1:
Test failed: assertion failed: test_cases.iter().all(|test_case|
compiled_regexp.is_match(test_case)) at tests/property_tests.rs:295.
minimal failing input: test_cases = {
--
matching_regexes_with_case_insensitive_matching_and_verbose_mode
test result: FAILED. 44 passed; 1 failed; 0 ignored; 0 measured; 0 filtered out;
finished in 4.54s
error: test failed, to rerun pass `--test property_tests`
guile22-2.2.7-alt1
errors: 1
FAIL: check-guile
1 of 1 test failed
hnswlib-devel-0.8.0-alt1
File "<string>", line 5, in <module>
ModuleNotFoundError: No module named 'numpy'
Traceback (most recent call last):
--
raise RuntimeError(err_msg) from None
RuntimeError: build_wheel failed
jansi-0:2.4.0-alt1_7jpp11
In file included from jansi.c:16:
jansi.h:34:14: fatal error: inc_linux/jni.h: No such file or directory
34 | #include "inc_linux/jni.h"
java-1.8.0-openjdk-0:1.8.0.462.b08-alt1
RPM build errors:
Unparseable macro: % by %%)
Macro %z not found
ignored self-provides: java-1.8.0-openjdk = 0:1.8.0.462.b08-alt1
ignored self-provides: java-1.8.0-openjdk-headless = 0:1.8.0.462.b08-alt1
ignored self-provides: java-1.8.0-openjdk-devel = 0:1.8.0.462.b08
ignored self-provides: java-1.8.0-openjdk-demo = 0:1.8.0.462.b08-alt1
ignored self-provides: java-1.8.0-openjdk-src = 0:1.8.0.462.b08-alt1
ignored self-provides: java-1.8.0-openjdk-javadoc = 0:1.8.0.462.b08-alt1
Unparseable macro: %.*}"
jnr-posix-3.0.47-alt1_8jpp11
[INFO] Ignoring JPMS as source level 1.5 is below 9
[INFO] error: Source option 5 is no longer supported. Use 6 or later.
[INFO] error: Target option 1.5 is no longer supported. Use 1.6 or later.
[INFO] ------------------------------------------------------------------------
jssc-2.8.0-alt1_25jpp11
+ g++ -pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic
-Wl,-z,relro -fPIC -shared -D 'jSSC_NATIVE_LIB_VERSION="2.8"' -I '%{java_home}/include'
-I '%{java_home}/include/linux' -o libjSSC-2.8.0.so src/cpp/_nix_based/jssc.cpp
src/cpp/_nix_based/jssc.cpp:46:10: fatal error: jni.h: No such file or directory
46 | #include <jni.h>
ldns-1.8.4-alt1
./libtool --tag=CC --quiet --mode=compile i586-alt-linux-gcc -I. -I. -DHAVE_CONFIG_H
-DLDNS_TRUST_ANCHOR_FILE="\"/etc/unbound/root.key\"" -DOPENSSL_API_COMPAT=10100
-fno-strict-aliasing -Wunused-function -Wstrict-prototypes -Wwrite-strings -W -Wall
-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic
-D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -c ./examples/ldns-version.c -o
examples/ldns-version.lo
mv: cannot stat 'examples/ldns-version.loT': No such file or directory
make: Leaving directory '/usr/src/RPM/BUILD/ldns-1.8.4'
--
./libtool --tag=CC --quiet --mode=compile i586-alt-linux-gcc -I. -I. -DHAVE_CONFIG_H
-DLDNS_TRUST_ANCHOR_FILE="\"/etc/unbound/root.key\"" -DOPENSSL_API_COMPAT=10100
-fno-strict-aliasing -Wunused-function -Wstrict-prototypes -Wwrite-strings -W -Wall
-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic
-D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -c ./examples/ldns-zcat.c -o examples/ldns-zcat.lo
mv: cannot stat 'examples/ldns-zcat.loT': No such file or directory
make: Leaving directory '/usr/src/RPM/BUILD/ldns-1.8.4'
--
./libtool --tag=CC --quiet --mode=compile i586-alt-linux-gcc -I. -I. -DHAVE_CONFIG_H
-DLDNS_TRUST_ANCHOR_FILE="\"/etc/unbound/root.key\"" -DOPENSSL_API_COMPAT=10100
-fno-strict-aliasing -Wunused-function -Wstrict-prototypes -Wwrite-strings -W -Wall
-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic
-D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -c ./examples/ldns-walk.c -o examples/ldns-walk.lo
mv: cannot stat 'examples/ldns-walk.loT': No such file or directory
make: Leaving directory '/usr/src/RPM/BUILD/ldns-1.8.4'
--
./libtool --tag=CC --quiet --mode=compile i586-alt-linux-gcc -I. -I. -DHAVE_CONFIG_H
-DLDNS_TRUST_ANCHOR_FILE="\"/etc/unbound/root.key\"" -DOPENSSL_API_COMPAT=10100
-fno-strict-aliasing -Wunused-function -Wstrict-prototypes -Wwrite-strings -W -Wall
-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic
-D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -c examples/ldns-zsplit.c -o examples/ldns-zsplit.o
mv: cannot stat 'examples/ldns-zsplit.loT': No such file or directory
make: Leaving directory '/usr/src/RPM/BUILD/ldns-1.8.4'
--
./libtool --tag=CC --quiet --mode=link i586-alt-linux-gcc -DOPENSSL_API_COMPAT=10100
-fno-strict-aliasing -Wunused-function -Wstrict-prototypes -Wwrite-strings -W -Wall
-pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic
-D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE examples/ldns-version.lo compat/b64_pton.lo
compat/b64_ntop.lo libldns.la -lssl -lcrypto -o examples/ldns-version ./libldns.la
ld: /usr/src/tmp/cc0iszr4.ltrans0.ltrans.o:(.debug_info+0x27): undefined reference to
`ldns_version.c.a051f62f'
ld: /usr/src/tmp/cc0iszr4.ltrans0.ltrans.o:(.debug_info+0x3a): undefined reference to
`ldns_version.c.a051f62f'
ld: /usr/src/tmp/cc0iszr4.ltrans0.ltrans.o:(.debug_info+0x53): undefined reference to
`ldns_version.c.a051f62f'
ld: /usr/src/tmp/cc0iszr4.ltrans0.ltrans.o:(.debug_info+0x74): undefined reference to
`ldns_version.c.a051f62f'
collect2: error: ld returned 1 exit status
make: *** [Makefile:206: examples/ldns-version] Error 1
libdatrie-0.2.13-alt1_7
# SKIP: 0
# XFAIL: 0
# FAIL: 0
# XPASS: 0
# ERROR: 0
make[3]: Leaving directory '/usr/src/RPM/BUILD/libdatrie-0.2.13/tests'
--
Processing files: libdatrie-devel-0.2.13-alt1_7
error: File not found by glob:
/usr/src/tmp/libdatrie-buildroot/usr/share/doc/libdatrie-devel/*.png
Executing(%doc): /bin/sh -e /usr/src/tmp/rpm-tmp.4570
libgda6-6.0.0-alt2
Selected version libxslt-devel#1.1.39-alt1:sisyphus+349406.100.1.1 на 1716751808 for
libxslt-devel>=1.0.9
E: Couldn't find package libgladeui2.0-devel
hsh-install: Failed to calculate package file list.
libgweather-40.0-alt1
Selected version vala-tools#0.56.18-alt1:sisyphus+376659.100.1.1 на 1740964220 for
vala-tools>=0.21.1
E: Couldn't find package libgladeui2.0-devel
hsh-install: Failed to calculate package file list.
libmatthew-java-0.8-alt2_23jpp8
cc -pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -march=i586 -mtune=generic
-std=c99 -fpic -fno-stack-protector -I%{java_home}/include -I%{java_home}/include/linux
-c -o cgi-java.o cgi-java.c
cgi-java.c:28:10: fatal error: jni.h: No such file or directory
28 | #include <jni.h>
liboqs-0.14.0-alt1
[gw3] [ 99%] PASSED tests/test_cmdline.py::test_sig[Dilithium2]
tests/test_cmdline.py::test_sig[Dilithium3]
[gw3] [ 99%] PASSED tests/test_cmdline.py::test_sig[Dilithium3]
tests/test_cmdline.py::test_sig[Dilithium5]
[gw3] [ 99%] PASSED tests/test_cmdline.py::test_sig[Dilithium5]
tests/test_cmdline.py::test_sig[ML-DSA-44]
[gw3] [ 99%] PASSED tests/test_cmdline.py::test_sig[ML-DSA-44]
tests/test_cmdline.py::test_sig[ML-DSA-65]
[gw3] [ 99%] PASSED tests/test_cmdline.py::test_sig[ML-DSA-65]
tests/test_cmdline.py::test_sig[ML-DSA-87] ninja: build stopped: interrupted by user.
make-initrd-bootchain-0.1.5-alt30
In bootchain-core/data/etc/rc.d/init.d/bootchain line 31:
stop() {
^-- SC2329 (info): This function is never invoked. Check usage (or ignored if invoked
indirectly).
For more information:
https://www.shellcheck.net/wiki/SC2329 -- This function is never invoked. C...
In bootchain-localdev/data/bin/scandev-sh-functions line 240:
_get_lbsize()
^-- SC2329 (info): This function is never invoked. Check usage (or ignored if invoked
indirectly).
For more information:
https://www.shellcheck.net/wiki/SC2329 -- This function is never invoked. C...
perl-Net-SIP-0.838-alt1
# received=54 lost=0 expect ca. 467.5 packets, events='1 2 D # 3 4 B *'
# Failed test 'UAS RTP ok'
# at t/19_call_with_dtmf.t line 151.
--
t/19_call_with_dtmf.t (Wstat: 256 (exited 1) Tests: 216 Failed: 1)
Failed test: 151
Non-zero exit status: 1
--
Result: FAIL
Failed 1/26 test programs. 1/2000 subtests failed.
make: *** [Makefile:829: test_dynamic] Error 255
python3-module-cattrs-25.1.1-alt1
==================================== ERRORS ====================================
________________ ERROR collecting tests/preconf/test_pyyaml.py _________________
ImportError while importing test module
'/usr/src/RPM/BUILD/python3-module-cattrs-25.1.1/tests/preconf/test_pyyaml.py'.
--
from yaml import safe_dump, safe_load
E ModuleNotFoundError: No module named 'yaml'
____________________ ERROR collecting tests/test_preconf.py ____________________
ImportError while importing test module
'/usr/src/RPM/BUILD/python3-module-cattrs-25.1.1/tests/test_preconf.py'.
--
from yaml import safe_dump, safe_load
E ModuleNotFoundError: No module named 'yaml'
=========================== short test summary info ============================
ERROR tests/preconf/test_pyyaml.py
ERROR tests/test_preconf.py
!!!!!!!!!!!!!!!!!!! Interrupted: 2 errors during collection !!!!!!!!!!!!!!!!!!!!
--
INFO : Command's result: FAILURE
INFO : Command's error: Command '['python3', '-m', 'pytest']' returned non-zero
exit status 2.
python3-module-drf-spectacular-0.28.0-alt1
> assert actual == expected and not diff, diff
E AssertionError: ---
E +++
--
=========================== short test summary info ============================
FAILED tests/test_i18n.py::test_i18n_strings - AssertionError: ---
1 failed, 473 passed, 2 warnings in 13.58s
python3-module-easyprocess-1.1-alt2
tests/test_fast/test_proc.py::test_start3 PASSED [ 15%]
tests/test_fast/test_proc.py::test_alive FAILED [ 18%]
tests/test_fast/test_proc.py::test_std PASSED [ 21%]
--
tests/test_fast/test_proc.py::test_wrap PASSED [ 26%]
tests/test_fast/test_proc.py::test_with FAILED [ 28%]
tests/test_fast/test_proc.py::test_parse PASSED [ 31%]
--
=========================== short test summary info ============================
FAILED tests/test_fast/test_proc.py::test_alive - assert False
FAILED tests/test_fast/test_proc.py::test_with - assert False
=================== 2 failed, 36 passed in 80.19s (0:01:20) ====================
python3-module-hypothesis-jsonschema-0.23.1-alt1
assert make_validator(schema).is_valid(value)
E AssertionError: assert False
E + where False = is_valid(9007199254741149)
--
=========================== short test summary info ============================
FAILED tests/test_from_schema.py::test_generated_data_matches_schema[number-schema]
= 1 failed, 860 passed, 59 skipped, 109 xfailed, 2 xpassed in 424.03s (0:07:04) =
INFO : Command's result: FAILURE
INFO : Command's error: Command '['python3', '-m', 'pytest', '-n', 'auto']' returned
non-zero exit status 1.
python3-module-pytest-httpbin-2.1.0-alt1
______________________________ test_with_urllib3 _______________________________
urllib3.exceptions.SSLError: EOF occurred in violation of protocol (_ssl.c:2427)
The above exception was the direct cause of the following exception:
--
response: BaseHTTPResponse | None = None,
error: Exception | None = None,
_pool: ConnectionPool | None = None,
--
:type response: :class:`~urllib3.response.BaseHTTPResponse`
:param Exception error: An error encountered during the request, or
None if the response was received successfully.
:return: A new ``Retry`` object.
if self.total is False and error:
# Disabled, indicate to re-raise the error.
--
read -= 1
elif error:
# Other retry?
--
> raise MaxRetryError(_pool, url, reason) from reason # type: ignore[arg-type]
E urllib3.exceptions.MaxRetryError: HTTPSConnectionPool(host='127.0.0.1',
port=40491): Max retries exceeded with url: /post (Caused by SSLError(SSLEOFError(8,
'EOF occurred in violation of protocol (_ssl.c:2427)')))
/usr/lib/python3/site-packages/urllib3/util/retry.py:519: MaxRetryError
--
=========================== short test summary info ============================
FAILED tests/test_httpbin.py::test_with_urllib3 - urllib3.exceptions.MaxRetry...
========================= 1 failed, 22 passed in 3.63s =========================
INFO : Command's result: FAILURE
INFO : Command's error: Command '['python3', '-m', 'pytest', '-ra', '-Wignore']'
returned non-zero exit status 1.
error: Bad exit status from /usr/src/tmp/rpm-tmp.97380 (%check)
python3-module-retrying-1.4.2-alt1
"msg": "calls_per_second_final was not within +/-20% of calls_per_second_initial"
E AssertionError: False is not true : {'calls_per_second_initial': 19428.82860883271,
'calls_per_second_final': 23576.863674863933, 'msg': 'calls_per_second_final was not
within +/-20% of calls_per_second_initial'}
test_retrying.py:530: AssertionError
=========================== short test summary info ============================
FAILED test_retrying.py::LoadTest::test_load - AssertionError: False is not t...
======================== 1 failed, 26 passed in 24.50s =========================
INFO : Command's result: FAILURE
INFO : Command's error: Command '['python3', '-m', 'pytest', 'test_retrying.py']'
returned non-zero exit status 1.
python3-module-sanic-25.3.0-alt1
=========================== short test summary info ============================
FAILED tests/test_cli.py::test_server_run_with_repl - EOFError: Ran out of input
= 1 failed, 1663 passed, 19 skipped, 14 deselected, 3 xfailed, 6 xpassed, 183 warnings
in 239.21s (0:03:59) =
INFO : Command's result: FAILURE
INFO : Command's error: Command '['python3', '-m', 'pytest', '-k', 'not
test_websocket_route_with_subprotocols and not test_keep_alive_client_timeout and not
test_multiprocessing']' returned non-zero exit status 1.
python3-module-ttp-0.9.5-alt2
=========================== short test summary info ============================
FAILED test_misc.py::test_in_threads_parsing - assert False
==== 1 failed, 265 passed, 3 skipped, 15 deselected, 121 warnings in 5.28s =====
qalculate-5.5.2-alt1
/usr/libexec/rpm-build/install -p -m 644 ./html/doxygen_crawl.html ./html/index.html
././html/*.png ./html/doxygen.css ./html/navtree.css ./html/tabs.css ./html/clipboard.js
./html/dynsections.js ./html/jquery.js ./html/menu.js ./html/menudata.js
'/usr/src/tmp/qalculate-buildroot/usr/share/doc/libqalculate/reference/html'
/usr/bin/install: cannot stat '././html/*.png': No such file or directory
make[3]: *** [Makefile:404: install-referenceDATA] Error 1
qtox-1.18.3-alt1
from /usr/src/RPM/BUILD/qtox-1.18.3/util/src/toxcoreerrorparser.cpp:6:
/usr/include/tox/tox_options.h:13:10: fatal error: tox_log_level.h: No such file or
directory
13 | #include "tox_log_level.h"
snappy-java-1.1.2.4-alt2_19jpp11
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 1.574 s
[INFO] Finished at: 2025-08-09T09:11:50Z
[INFO] ------------------------------------------------------------------------
[ERROR] UndeclaredThrowableException: InvocationTargetException: Plugin
org.apache.maven.plugins:maven-antrun-plugin:any or one of its dependencies could not
be resolved: Cannot access central (https://repo.maven.apache.org/maven2) in offline
mode and the artifact com.sun:tools:jar:1.8.0 has not been downloaded from it before.
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
sqlite-jdbc-3.15.1-alt1_8jpp11
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 1.730 s
[INFO] Finished at: 2025-08-09T09:21:13Z
[INFO] ------------------------------------------------------------------------
[ERROR] UndeclaredThrowableException: InvocationTargetException: Plugin
org.apache.maven.plugins:maven-antrun-plugin:1.7 or one of its dependencies could not
be resolved: Cannot access central (https://repo.maven.apache.org/maven2) in offline
mode and the artifact com.sun:tools:jar:1.8.0 has not been downloaded from it before.
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
tomcat-native-1:1.2.35-alt1_1jpp11
checking JAVA_HOME... failed
configure: error: %{java_home} is not a directory
error: Bad exit status from /usr/src/tmp/rpm-tmp.70337 (%build)
vte3-0.80.3-alt1.1
libsystemd-devel is already the newest version.
E: Couldn't find package libgladeui2.0-devel
hsh-install: Failed to calculate package file list.
27 error logs REMOVED from the list
crda-4.15-alt6.2025.02.20
csvlens-0.13.0-alt1
doxygen-1:1.13.2-alt1
drumgizmo-0.9.20-alt3
itk-5.4.3-alt2
libscalapack-2.1.0-alt3
lightdm-1.32.0-alt10
log4cplus-2.1.2-alt1
maven-1:3.8.8-alt1
micmac-1.1.1-alt2
mumps-5.3.5-alt3
ouch-0.6.1-alt1
perl-Parallel-Runner-0.014-alt1_3
python3-module-cheroot-10.0.1-alt4
python3-module-click-plugins-1.1.1-alt1
python3-module-fastapi-0.116.1-alt3
python3-module-h2-4.1.0-alt1
python3-module-moneyed-3.0-alt1
python3-module-pygibson-0.2.1-alt2
python3-module-scikits.bootstrap-1.1.0-alt6.1
python3-module-sphinx-theme-builder-0.2.0b2-alt2
python3-module-tox-4.28.3-alt1
python3-module-uharfbuzz-0.50.2-alt1
shepherd-0.10.5-alt1
telegraf-1.35.0-alt1
websocat-1.11.0-alt1
zstd-1.5.5-alt2
Total 229 error logs.
Подробная информация о списке рассылки Sisyphus-cybertalk