[cyber] I: Sisyphus-20241116 x86_64 beehive_status: +14 -18 (863)
ALT beekeeper
hiver на altlinux.org
Сб Ноя 16 09:21:43 MSK 2024
14 NEW error logs
caddy-2.8.4-alt2
{"level":"info","ts":1731732808.2845485,"logger":"http","msg":"servers shutting down;
grace period initiated","duration":0.000000001}
{"level":"error","ts":1731732808.2846882,"logger":"http.handlers.reverse_proxy.health_checker.active","msg":"active
health check failed","address":"/usr/src/tmp/1485083085.sock:2021","error":"making
request: parse \"http://%2Fusr%2Fsrc%2Ftmp%2F1485083085.sock:2021/health\": invalid
URL escape \"%2F\""}
{"level":"info","ts":1731732808.2849452,"msg":"autosaved config (load with --resume
flag)","file":"/usr/src/.config/caddy/autosave.json"}
glog-0.7.1-alt1
26/26 Test #26: dcheck_off .......................***Not Run (Disabled) 0.00 sec
96% tests passed, 1 tests failed out of 23
Total Test time (real) = 5.83 sec
--
26 - dcheck_off (Disabled)
The following tests FAILED:
2 - logging (Subprocess aborted)
gnome-vfs-1:2.24.4-alt13
Testing shutdown...
FAIL: test-async-cancel
PASS: test-escape
GConf Error: Client failed to connect to the D-BUS daemon:
Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
--
PASS: ./auto-test
1 of 6 tests failed
make[2]: *** [Makefile:892: check-TESTS] Error 1
gnuplot-1:6.0.1-alt1
make[1]: Leaving directory '/usr/src/RPM/BUILD/gnuplot-6.0.1/docs'
make[1]: Entering directory '/usr/src/RPM/BUILD/gnuplot-6.0.1/docs'
x86_64-alt-linux-gcc -pipe -frecord-gcc-switches -Wall -g -O2 -flto=auto -lcerf -o
doc2tex doc2tex-doc2tex.o doc2tex-termdoc.o -lm -lopenspecfun -lcerf -lz -lpangocairo-1.0
-lpango-1.0 -lgobject-2.0 -lharfbuzz -lcairo -lglib-2.0
make[1]: Leaving directory '/usr/src/RPM/BUILD/gnuplot-6.0.1/docs'
make[1]: *** Deleting file 'gnuplot.tex'
make[1]: Entering directory '/usr/src/RPM/BUILD/gnuplot-6.0.1/docs'
./doc2tex -figures ./gnuplot.doc gnuplot.tex
make[1]: *** [Makefile:1097: gnuplot.tex] Segmentation fault
make[1]: Leaving directory '/usr/src/RPM/BUILD/gnuplot-6.0.1/docs'
make: *** [Makefile:1100: pdf] Error 2
kernel-modules-evdi-rt-1.14.4-alt2.393584.1.rt43
kernel-headers-modules-rt is already the newest version.
E: Version ='1.14.4' for 'kernel-source-evdi' was not found
hsh-install: Failed to calculate package file list.
libcacard-2.8.1-alt1
# libcacard-DEBUG: vreader_xfr_bytes: status=27013 sw1=0x69 sw2=0x85 len=0 (total=2)
not ok /hw-tests/sign-logout-sign - ERROR:../tests/hwtests.c:148:do_login: assertion
failed (pbRecvBuffer[0] == VCARD7816_SW1_SUCCESS): (0x00000069 == 0x00000090)
Bail out!
stderr:
ERROR:../tests/hwtests.c:148:do_login: assertion failed (pbRecvBuffer[0] ==
VCARD7816_SW1_SUCCESS): (0x00000069 == 0x00000090)
Summary of Failures:
--
Full log written to
/usr/src/RPM/BUILD/libcacard-2.8.1/x86_64-alt-linux/meson-logs/testlog.txt
FAILED: meson-internal__test
/usr/bin/meson test --no-rebuild --print-errorlogs
mumps-5.3.5-alt3
ld: /usr/src/tmp/ccRGIo13.ltrans0.ltrans.o: in function `extractElimTree':
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/gelim.c:1067:(.text+0x86ca): undefined
reference to `newElimTree'
ld: /usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/gelim.c:1121:(.text+0x8841): undefined
reference to `initFchSilbRoot'
ld: /usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/gelim.c:1067:(.text+0x886e): undefined
reference to `newElimTree'
ld: /usr/src/tmp/ccRGIo13.ltrans0.ltrans.o: in function `setupCSSFromFrontSubscripts':
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/symbfac.c:248:(.text+0xa275): undefined
reference to `firstPostorder'
ld: /usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/symbfac.c:248:(.text+0xa2ea): undefined
reference to `nextPostorder'
ld: /usr/src/tmp/ccRGIo13.ltrans0.ltrans.o: in function `newFrontSubscripts':
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/symbfac.c:270:(.text+0xa322): undefined
reference to `nFactorIndices'
ld: /usr/src/tmp/ccRGIo13.ltrans0.ltrans.o: in function `freeFrontSubscripts':
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/symbfac.c:288:(.text+0xa408): undefined
reference to `freeElimTree'
ld: /usr/src/tmp/ccRGIo13.ltrans0.ltrans.o: in function `printFrontSubscripts':
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/symbfac.c:314:(.text+0xa493): undefined
reference to `firstPostorder'
ld: /usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/symbfac.c:314:(.text+0xa559): undefined
reference to `nextPostorder'
ld: /usr/src/tmp/ccRGIo13.ltrans0.ltrans.o: in function `initFactorMtx':
/usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/symbfac.c:547:(.text+0xa817): undefined
reference to `firstPostorder'
ld: /usr/src/RPM/BUILD/mumps-5.3.5-seq/PORD/lib/symbfac.c:547:(.text+0xa904): undefined
reference to `nextPostorder'
perl-Starlet-0.31-alt1_22
t/11multi-sockets.t ........ ok
# Failed test 'No warnings'
# at t/12bad_request_line.t line 24.
--
t/12bad_request_line.t (Wstat: 256 (exited 1) Tests: 2 Failed: 1)
Failed test: 2
Non-zero exit status: 1
--
Result: FAIL
Failed 1/15 test programs. 1/146 subtests failed.
make: *** [Makefile:753: test_dynamic] Error 255
pytables-1:3.10.1-alt1
......................................ss....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................ssssssssssssssssssssssssssssssss...............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................sssss....................................................................................................................................sssss...............sssss....................................................................................................................................................................ssssss......................................................................................................................................................................................................................s................................................................................................................................................................................................................................................................................................s...s.............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
FAIL: None (tables.tests.test_basics.ThreadingTestCase.None)
Traceback (most recent call last):
--
self.assertEqual(q.get(), 'OK')
AssertionError: (<class 'tables.exceptions.HDF5ExtError'>[129 chars]6c0>) != 'OK'
Ran 6861 tests in 276.748s
FAILED (failures=1, skipped=59)
/usr/src/RPM/BUILD/pytables-3.10.1/build/lib.linux-x86_64-cpython-312/tables/file.py:114:
UnclosedFileWarning: Closing remaining open file: /usr/src/tmp/ThreadingTestCasenygdxysh.h5
pytesseract-0.3.10-alt1.1
tests/pytesseract_test.py::test_get_languages[custom_tessdata_dir] [32mPASSED[0m[32m
[ 76%][0m
tests/pytesseract_test.py::test_get_languages[incorrect_tessdata_dir] [31mFAILED[0m[31m
[ 78%][0m
tests/pytesseract_test.py::test_get_languages[invalid_tessdata_dir] [31mFAILED[0m[31m
[ 80%][0m
tests/pytesseract_test.py::test_get_languages[invalid_config] [32mPASSED[0m[31m
[ 82%][0m
--
stderr=subprocess.STDOUT,
except OSError:
raise TesseractNotFoundError()
--
> raise TesseractNotFoundError()
[1m[31mE pytesseract.pytesseract.TesseractNotFoundError: tesseract is not
installed or it's not in your PATH. See README file for more information.[0m
[1m[31mpytesseract/pytesseract.py[0m:370: TesseractNotFoundError
--
stderr=subprocess.STDOUT,
except OSError:
raise TesseractNotFoundError()
--
> raise TesseractNotFoundError()
[1m[31mE pytesseract.pytesseract.TesseractNotFoundError: tesseract is not
installed or it's not in your PATH. See README file for more information.[0m
[1m[31mpytesseract/pytesseract.py[0m:370: TesseractNotFoundError
[36m[1m=========================== short test summary info
============================[0m
[31mFAILED[0m
tests/pytesseract_test.py::[1mtest_get_languages[incorrect_tessdata_dir][0m -
pytesseract.pytesseract.TesseractNotFoundError: tesseract is not installed ...
[31mFAILED[0m tests/pytesseract_test.py::[1mtest_get_languages[invalid_tessdata_dir][0m
- pytesseract.pytesseract.TesseractNotFoundError: tesseract is not installed ...
[31m=================== [31m[1m2 failed[0m, [32m43 passed[0m, [33m2 skipped[0m[31m
in 9.73s[0m[31m ====================[0m
ERROR: InvocationError for command
/usr/src/RPM/BUILD/pytesseract-0.3.10/.tox/py312/bin/python -bb -m pytest (exited with
code 1)
ERROR: invocation failed (exit code 1)
Б°√ FAIL py312 in 12.51 seconds
python3-module-pygeoif-1.5.0-alt1
> assert pygeoif.functions.signed_area(hull) >= 0
E AssertionError: assert -0.25 >= 0
E + where -0.25 = <function signed_area at 0x7f6670a3f740>(((-1.0, 0.0), (-0.5,
9007200328482816.0), (-1.0, 1.0), (-1.0, 0.0)))
--
=========================== short test summary info ============================
FAILED tests/hypothesis/test_functions.py::test_fuzz_convex_hull - AssertionE...
====== 1 failed, 427 passed, 1 xfailed, 1274 warnings in 83.37s (0:01:23) ======
INFO : Command's result: FAILURE
INFO : Command's error: Command '['python3', '-m', 'pytest', '-v']' returned non-zero
exit status 1.
python3-module-routes-2.5.1-alt1.1
Processing files: python3-module-routes-2.5.1-alt1.1
error: No such file or directory:
/usr/src/tmp/python3-module-routes-buildroot/usr/lib/python3/site-packages/Routes-2.5.1.dev20241115.dist-info
Executing(%doc): /bin/sh -e /usr/src/tmp/rpm-tmp.99575
--
RPM build errors:
No such file or directory:
/usr/src/tmp/python3-module-routes-buildroot/usr/lib/python3/site-packages/Routes-2.5.1.dev20241115.dist-info
redis-7.2.4-alt1.1
Killing still running Redis server 2922176
Killing still running Redis server 2923356
Killing still running Redis server 2926945
Killing still running Redis server 2927112
Killing still running Redis server 2946567
Killing still running Redis server 2946835
Killing still running Redis server 3007488
Killing still running Redis server 3070919
Killing still running Redis server 3071024
Killing still running Redis server 3071125
tmux-3.5a-alt1
sh format-strings.sh
sh has-session-return.sh
sh if-shell-TERM.sh
sh if-shell-error.sh
sh if-shell-nested.sh
sh input-keys.sh
[FAIL] C-u -> ^U (Got: )
[FAIL] M-C-u -> ^[^U (Got: )
make: *** [Makefile:9: input-keys.sh] Error 1
make: Leaving directory '/usr/src/RPM/BUILD/tmux-3.5a/regress'
18 error logs REMOVED from the list
bld-0.3.4.1-alt4
casr-2.12.1-alt1
fcitx5-gtk-5.1.0-alt2_1
lasso-2.8.2-alt3
libgnomecups-0.2.3-alt7
libgnomeprint-2.18.8-alt5
libvamp-2.10.0-alt2
log4cxx-1.1.0-alt1_3
matchbox-panel-0.9.3-alt1_12.qa1
perl-Server-Starter-0.35-alt1.1
perl-Tie-DBI-1.08-alt1
pocl-6.0-alt0.3
python3-module-oslo.rootwrap-7.3.0-alt1
python3-module-pythran-0.16.1-alt1
python3-module-wand-0.6.13-alt1
qemu-9.0.2-alt3
t1lib-5.1.2-alt7
trinity-1.9-alt6
Total 863 error logs.
Подробная информация о списке рассылки Sisyphus-cybertalk